| Message ID | 1365005636-17526-3-git-send-email-g.liakhovetski@gmx.de (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
Hi Guennadi > To prepare to enable TWD on kzm9g-reference, clock initialisation has to be > done early. Move it from .init_machine to .init_time stage. > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> > --- (snip) > +static void __init timer_init(void) > +{ > + sh73a0_clock_init(); > + shmobile_timer_init(); > +} I'm not sure detail, but, shmobile_timer_init() will be removed. Can you check these patch/email on SH-ML or ARM ML ? Subject: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init Date: Mon, 1 Apr 2013 17:21:12 -0500 Subject: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init Date: Mon, 1 Apr 2013 17:21:12 -0500 Best regards --- Kuninori Morimoto -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 03, 2013 at 06:13:55PM +0200, Guennadi Liakhovetski wrote: > To prepare to enable TWD on kzm9g-reference, clock initialisation has to be > done early. Move it from .init_machine to .init_time stage. I'm pretty surprised by this given how much effort has been made to avoid early clock initialisation. > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> > --- > arch/arm/mach-shmobile/board-kzm9g-reference.c | 8 +++++++- > arch/arm/mach-shmobile/setup-sh73a0.c | 13 +++++++++---- > 2 files changed, 16 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c > index aefa50d..0f9b276 100644 > --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c > +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c > @@ -90,6 +90,12 @@ static void __init kzm_init(void) > #endif > } > > +static void __init timer_init(void) > +{ > + sh73a0_clock_init(); > + shmobile_timer_init(); > +} > + > static const char *kzm9g_boards_compat_dt[] __initdata = { > "renesas,kzm9g-reference", > NULL, > @@ -102,6 +108,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") > .nr_irqs = NR_IRQS_LEGACY, > .init_irq = irqchip_init, > .init_machine = kzm_init, > - .init_time = shmobile_timer_init, > + .init_time = timer_init, > .dt_compat = kzm9g_boards_compat_dt, > MACHINE_END > diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c > index 0469e84..8a1bc1c 100644 > --- a/arch/arm/mach-shmobile/setup-sh73a0.c > +++ b/arch/arm/mach-shmobile/setup-sh73a0.c > @@ -1018,9 +1018,6 @@ void __init sh73a0_add_standard_devices_dt(void) > { > struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; > > - /* clocks are setup late during boot in the case of DT */ > - sh73a0_clock_init(); > - > platform_add_devices(sh73a0_devices_dt, > ARRAY_SIZE(sh73a0_devices_dt)); > of_platform_populate(NULL, of_default_bus_match_table, > @@ -1030,6 +1027,14 @@ void __init sh73a0_add_standard_devices_dt(void) > platform_device_register_full(&devinfo); > } > > +static void __init add_standard_devices(void) > +{ > + /* clocks are setup late during boot in the case of DT */ > + sh73a0_clock_init(); > + > + sh73a0_add_standard_devices_dt(); > +} > + > static const char *sh73a0_boards_compat_dt[] __initdata = { > "renesas,sh73a0", > NULL, > @@ -1041,7 +1046,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") > .init_early = sh73a0_init_delay, > .nr_irqs = NR_IRQS_LEGACY, > .init_irq = irqchip_init, > - .init_machine = sh73a0_add_standard_devices_dt, > + .init_machine = add_standard_devices, > .init_time = shmobile_timer_init, > .dt_compat = sh73a0_boards_compat_dt, > MACHINE_END > -- > 1.7.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Morimoto-san On Wed, 3 Apr 2013, Kuninori Morimoto wrote: > Hi Guennadi > > > To prepare to enable TWD on kzm9g-reference, clock initialisation has to be > > done early. Move it from .init_machine to .init_time stage. > > > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> > > --- > (snip) > > +static void __init timer_init(void) > > +{ > > + sh73a0_clock_init(); > > + shmobile_timer_init(); > > +} > > I'm not sure detail, > but, shmobile_timer_init() will be removed. > > Can you check these patch/email on SH-ML or ARM ML ? > > Subject: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init > Date: Mon, 1 Apr 2013 17:21:12 -0500 > > Subject: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init > Date: Mon, 1 Apr 2013 17:21:12 -0500 Did you mean two different patches or was the duplication an accident? Anyway, thanks for a heads-up! I checked that patch, interesting. At least it's conflicting with this patch from Magnus: "ARM: shmobile: Register DT TWD from timer.c" https://patchwork.kernel.org/patch/2222551/ I know those patches are on a hold, but I was using the one above locally. If shmobile_timer_init() is removed, this won't be a huge problem for this work, I'll just have to call twd_local_timer_of_register() directly from .init_time, but whether these patches are good for upstream at all is another question, I'll expand on it a bit in a reply to Simon's mail. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Guennadi > > Subject: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init > > Date: Mon, 1 Apr 2013 17:21:12 -0500 > > > > Subject: [PATCH v2 02/13] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init > > Date: Mon, 1 Apr 2013 17:21:12 -0500 > > Did you mean two different patches or was the duplication an accident? Sorry, it was my copy-paste fault > Anyway, thanks for a heads-up! I checked that patch, interesting. At least > it's conflicting with this patch from Magnus: > > "ARM: shmobile: Register DT TWD from timer.c" > https://patchwork.kernel.org/patch/2222551/ > > I know those patches are on a hold, but I was using the one above locally. > If shmobile_timer_init() is removed, this won't be a huge problem for this > work, I'll just have to call twd_local_timer_of_register() directly from > .init_time, but whether these patches are good for upstream at all is > another question, I'll expand on it a bit in a reply to Simon's mail. Thank you for your help ! Best regards --- Kuninori Morimoto -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Simon On Thu, 4 Apr 2013, Simon Horman wrote: > On Wed, Apr 03, 2013 at 06:13:55PM +0200, Guennadi Liakhovetski wrote: > > To prepare to enable TWD on kzm9g-reference, clock initialisation has to be > > done early. Move it from .init_machine to .init_time stage. > > I'm pretty surprised by this given how much effort has > been made to avoid early clock initialisation. Yes, sorry, I probably failed to explain exactly the meaning of "RFC" in these patches. My goal was to find a way to activate the TWD on kzm9g in the "-reference" configuration, i.e. with DT, when TWD is also instantiated as a DT node. This didn't work out of the box by simply adding the respective DT node as in patch/rfc #3 in this series. Doing that just resulted in a lock up with no output. The reason was, that TWD was trying to initialise before any other timers / clocks and its calibration in twd_calibrate_rate() was cycling endlessly. So, I tried to find a way to fix this lock-up, which produced these RFCs. I'm perfectly aware, that this might not be what we want to have in the mainline, this is just an illustration, what I had to do to get TWD running with DT. As for "avoid early clock initialisation" - I'm aware of this goal in principle, but I'm not sure about details - how early is too early and when it is already allowed, why is this important with DT and not with legacy (because we want to initialise all clocks from DT?), what are proper ways to solve problems like this one? Note, that TWD has to be registered before secondary_start_kernel() is run. So, we need a clocksource before that time for a successful TWD calibration. Thanks Guennadi > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> > > --- > > arch/arm/mach-shmobile/board-kzm9g-reference.c | 8 +++++++- > > arch/arm/mach-shmobile/setup-sh73a0.c | 13 +++++++++---- > > 2 files changed, 16 insertions(+), 5 deletions(-) > > > > diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c > > index aefa50d..0f9b276 100644 > > --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c > > +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c > > @@ -90,6 +90,12 @@ static void __init kzm_init(void) > > #endif > > } > > > > +static void __init timer_init(void) > > +{ > > + sh73a0_clock_init(); > > + shmobile_timer_init(); > > +} > > + > > static const char *kzm9g_boards_compat_dt[] __initdata = { > > "renesas,kzm9g-reference", > > NULL, > > @@ -102,6 +108,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") > > .nr_irqs = NR_IRQS_LEGACY, > > .init_irq = irqchip_init, > > .init_machine = kzm_init, > > - .init_time = shmobile_timer_init, > > + .init_time = timer_init, > > .dt_compat = kzm9g_boards_compat_dt, > > MACHINE_END > > diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c > > index 0469e84..8a1bc1c 100644 > > --- a/arch/arm/mach-shmobile/setup-sh73a0.c > > +++ b/arch/arm/mach-shmobile/setup-sh73a0.c > > @@ -1018,9 +1018,6 @@ void __init sh73a0_add_standard_devices_dt(void) > > { > > struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; > > > > - /* clocks are setup late during boot in the case of DT */ > > - sh73a0_clock_init(); > > - > > platform_add_devices(sh73a0_devices_dt, > > ARRAY_SIZE(sh73a0_devices_dt)); > > of_platform_populate(NULL, of_default_bus_match_table, > > @@ -1030,6 +1027,14 @@ void __init sh73a0_add_standard_devices_dt(void) > > platform_device_register_full(&devinfo); > > } > > > > +static void __init add_standard_devices(void) > > +{ > > + /* clocks are setup late during boot in the case of DT */ > > + sh73a0_clock_init(); > > + > > + sh73a0_add_standard_devices_dt(); > > +} > > + > > static const char *sh73a0_boards_compat_dt[] __initdata = { > > "renesas,sh73a0", > > NULL, > > @@ -1041,7 +1046,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") > > .init_early = sh73a0_init_delay, > > .nr_irqs = NR_IRQS_LEGACY, > > .init_irq = irqchip_init, > > - .init_machine = sh73a0_add_standard_devices_dt, > > + .init_machine = add_standard_devices, > > .init_time = shmobile_timer_init, > > .dt_compat = sh73a0_boards_compat_dt, > > MACHINE_END > > -- > > 1.7.2.5 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 04, 2013 at 09:13:07AM +0200, Guennadi Liakhovetski wrote: > Hi Simon > > On Thu, 4 Apr 2013, Simon Horman wrote: > > > On Wed, Apr 03, 2013 at 06:13:55PM +0200, Guennadi Liakhovetski wrote: > > > To prepare to enable TWD on kzm9g-reference, clock initialisation has to be > > > done early. Move it from .init_machine to .init_time stage. > > > > I'm pretty surprised by this given how much effort has > > been made to avoid early clock initialisation. > > Yes, sorry, I probably failed to explain exactly the meaning of "RFC" in > these patches. My goal was to find a way to activate the TWD on kzm9g in > the "-reference" configuration, i.e. with DT, when TWD is also > instantiated as a DT node. This didn't work out of the box by simply > adding the respective DT node as in patch/rfc #3 in this series. Doing > that just resulted in a lock up with no output. The reason was, that TWD > was trying to initialise before any other timers / clocks and its > calibration in twd_calibrate_rate() was cycling endlessly. So, I tried to > find a way to fix this lock-up, which produced these RFCs. I'm perfectly > aware, that this might not be what we want to have in the mainline, this > is just an illustration, what I had to do to get TWD running with DT. Thanks for the clarification, I understand. > As for "avoid early clock initialisation" - I'm aware of this goal in > principle, but I'm not sure about details - how early is too early and > when it is already allowed, why is this important with DT and not with > legacy (because we want to initialise all clocks from DT?), what are > proper ways to solve problems like this one? Note, that TWD has to be > registered before secondary_start_kernel() is run. So, we need a > clocksource before that time for a successful TWD calibration. I wonder if this problem can be resolved using init priorities? In general I believe the idea is that early clocks can and should be avoided because they should not be necessary. If they are necessary in some cases then I assume we will use them. Magnus, can you clarify this? > Thanks > Guennadi > > > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> > > > --- > > > arch/arm/mach-shmobile/board-kzm9g-reference.c | 8 +++++++- > > > arch/arm/mach-shmobile/setup-sh73a0.c | 13 +++++++++---- > > > 2 files changed, 16 insertions(+), 5 deletions(-) > > > > > > diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c > > > index aefa50d..0f9b276 100644 > > > --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c > > > +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c > > > @@ -90,6 +90,12 @@ static void __init kzm_init(void) > > > #endif > > > } > > > > > > +static void __init timer_init(void) > > > +{ > > > + sh73a0_clock_init(); > > > + shmobile_timer_init(); > > > +} > > > + > > > static const char *kzm9g_boards_compat_dt[] __initdata = { > > > "renesas,kzm9g-reference", > > > NULL, > > > @@ -102,6 +108,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") > > > .nr_irqs = NR_IRQS_LEGACY, > > > .init_irq = irqchip_init, > > > .init_machine = kzm_init, > > > - .init_time = shmobile_timer_init, > > > + .init_time = timer_init, > > > .dt_compat = kzm9g_boards_compat_dt, > > > MACHINE_END > > > diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c > > > index 0469e84..8a1bc1c 100644 > > > --- a/arch/arm/mach-shmobile/setup-sh73a0.c > > > +++ b/arch/arm/mach-shmobile/setup-sh73a0.c > > > @@ -1018,9 +1018,6 @@ void __init sh73a0_add_standard_devices_dt(void) > > > { > > > struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; > > > > > > - /* clocks are setup late during boot in the case of DT */ > > > - sh73a0_clock_init(); > > > - > > > platform_add_devices(sh73a0_devices_dt, > > > ARRAY_SIZE(sh73a0_devices_dt)); > > > of_platform_populate(NULL, of_default_bus_match_table, > > > @@ -1030,6 +1027,14 @@ void __init sh73a0_add_standard_devices_dt(void) > > > platform_device_register_full(&devinfo); > > > } > > > > > > +static void __init add_standard_devices(void) > > > +{ > > > + /* clocks are setup late during boot in the case of DT */ > > > + sh73a0_clock_init(); > > > + > > > + sh73a0_add_standard_devices_dt(); > > > +} > > > + > > > static const char *sh73a0_boards_compat_dt[] __initdata = { > > > "renesas,sh73a0", > > > NULL, > > > @@ -1041,7 +1046,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") > > > .init_early = sh73a0_init_delay, > > > .nr_irqs = NR_IRQS_LEGACY, > > > .init_irq = irqchip_init, > > > - .init_machine = sh73a0_add_standard_devices_dt, > > > + .init_machine = add_standard_devices, > > > .init_time = shmobile_timer_init, > > > .dt_compat = sh73a0_boards_compat_dt, > > > MACHINE_END > > > -- > > > 1.7.2.5 > > > > > > -- > > > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > > > --- > Guennadi Liakhovetski, Ph.D. > Freelance Open-Source Software Developer > http://www.open-technology.de/ > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index aefa50d..0f9b276 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -90,6 +90,12 @@ static void __init kzm_init(void) #endif } +static void __init timer_init(void) +{ + sh73a0_clock_init(); + shmobile_timer_init(); +} + static const char *kzm9g_boards_compat_dt[] __initdata = { "renesas,kzm9g-reference", NULL, @@ -102,6 +108,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, .init_machine = kzm_init, - .init_time = shmobile_timer_init, + .init_time = timer_init, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 0469e84..8a1bc1c 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -1018,9 +1018,6 @@ void __init sh73a0_add_standard_devices_dt(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; - /* clocks are setup late during boot in the case of DT */ - sh73a0_clock_init(); - platform_add_devices(sh73a0_devices_dt, ARRAY_SIZE(sh73a0_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, @@ -1030,6 +1027,14 @@ void __init sh73a0_add_standard_devices_dt(void) platform_device_register_full(&devinfo); } +static void __init add_standard_devices(void) +{ + /* clocks are setup late during boot in the case of DT */ + sh73a0_clock_init(); + + sh73a0_add_standard_devices_dt(); +} + static const char *sh73a0_boards_compat_dt[] __initdata = { "renesas,sh73a0", NULL, @@ -1041,7 +1046,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, - .init_machine = sh73a0_add_standard_devices_dt, + .init_machine = add_standard_devices, .init_time = shmobile_timer_init, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END
To prepare to enable TWD on kzm9g-reference, clock initialisation has to be done early. Move it from .init_machine to .init_time stage. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> --- arch/arm/mach-shmobile/board-kzm9g-reference.c | 8 +++++++- arch/arm/mach-shmobile/setup-sh73a0.c | 13 +++++++++---- 2 files changed, 16 insertions(+), 5 deletions(-)