Message ID | 20130402013740.GA28373@localhost (mailing list archive) |
---|---|
State | Accepted, archived |
Delegated to: | Zhang Rui |
Headers | show |
On Mon, 2013-04-01 at 22:37 -0300, Ezequiel Garcia wrote: > Hi Zhang, > > On Thu, Mar 28, 2013 at 09:43:37AM +0800, Zhang Rui wrote: > > On Tue, 2013-03-26 at 07:16 -0300, Ezequiel Garcia wrote: > > > This driver supports both Armada 370 and Armada XP SoC > > > thermal management controllers. > > > > > > Armada 370 has a register to check a valid temperature, whereas > > > Armada XP does not. Each has a different initialization (i.e. calibration) > > > function. The temperature conversion formula is the same for both. > > > > > > The controller present in each SoC have a very similar feature set, > > > so it corresponds to have one driver to support both of them. > > > > > > Although this driver may present similarities to Dove and Kirkwood > > > thermal driver, the exact differences and coincidences are not fully > > > known. For this reason, support is given through a separate driver. > > > > > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> patch applied. thanks, rui > > > --- > > [...] > > > > +static void armadaxp_init_sensor(struct armada_thermal_priv *priv) > > > +{ > > > + unsigned long reg; > > > + > > > + /* ??? */ > > > > what does this comment mean? > > > > In the case you'd prefer those comments to be removed, > here's a patch that does just that. > > Is it possible for you to take it instead of the previous one, > in this form? > > ------------------------------------8<---------------------------------------- > diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt > new file mode 100644 > index 0000000..fff93d5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt > @@ -0,0 +1,22 @@ > +* Marvell Armada 370/XP thermal management > + > +Required properties: > + > +- compatible: Should be set to one of the following: > + marvell,armada370-thermal > + marvell,armadaxp-thermal > + > +- reg: Device's register space. > + Two entries are expected, see the examples below. > + The first one is required for the sensor register; > + the second one is required for the control register > + to be used for sensor initialization (a.k.a. calibration). > + > +Example: > + > + thermal@d0018300 { > + compatible = "marvell,armada370-thermal"; > + reg = <0xd0018300 0x4 > + 0xd0018304 0x4>; > + status = "okay"; > + }; > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index a764f16..9eddf74 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -144,6 +144,14 @@ config DB8500_THERMAL > created. Cooling devices can be bound to the trip points to cool this > thermal zone if trip points reached. > > +config ARMADA_THERMAL > + tristate "Armada 370/XP thermal management" > + depends on ARCH_MVEBU > + depends on OF > + help > + Enable this option if you want to have support for thermal management > + controller present in Armada 370 and Armada XP SoC. > + > config DB8500_CPUFREQ_COOLING > tristate "DB8500 cpufreq cooling" > depends on ARCH_U8500 > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index d3a2b38..7f6509a 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -19,6 +19,7 @@ obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o > obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o > obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o > obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o > +obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o > obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > > diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c > new file mode 100644 > index 0000000..5b4d75f > --- /dev/null > +++ b/drivers/thermal/armada_thermal.c > @@ -0,0 +1,232 @@ > +/* > + * Marvell Armada 370/XP thermal sensor driver > + * > + * Copyright (C) 2013 Marvell > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/of.h> > +#include <linux/module.h> > +#include <linux/delay.h> > +#include <linux/platform_device.h> > +#include <linux/of_device.h> > +#include <linux/thermal.h> > + > +#define THERMAL_VALID_OFFSET 9 > +#define THERMAL_VALID_MASK 0x1 > +#define THERMAL_TEMP_OFFSET 10 > +#define THERMAL_TEMP_MASK 0x1ff > + > +/* Thermal Manager Control and Status Register */ > +#define PMU_TDC0_SW_RST_MASK (0x1 << 1) > +#define PMU_TM_DISABLE_OFFS 0 > +#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS) > +#define PMU_TDC0_REF_CAL_CNT_OFFS 11 > +#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS) > +#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30) > +#define PMU_TDC0_START_CAL_MASK (0x1 << 25) > + > +struct armada_thermal_ops; > + > +/* Marvell EBU Thermal Sensor Dev Structure */ > +struct armada_thermal_priv { > + void __iomem *sensor; > + void __iomem *control; > + struct armada_thermal_ops *ops; > +}; > + > +struct armada_thermal_ops { > + /* Initialize the sensor */ > + void (*init_sensor)(struct armada_thermal_priv *); > + > + /* Test for a valid sensor value (optional) */ > + bool (*is_valid)(struct armada_thermal_priv *); > +}; > + > +static void armadaxp_init_sensor(struct armada_thermal_priv *priv) > +{ > + unsigned long reg; > + > + reg = readl_relaxed(priv->control); > + reg |= PMU_TDC0_OTF_CAL_MASK; > + writel(reg, priv->control); > + > + /* Reference calibration value */ > + reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; > + reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); > + writel(reg, priv->control); > + > + /* Reset the sensor */ > + reg = readl_relaxed(priv->control); > + writel((reg | PMU_TDC0_SW_RST_MASK), priv->control); > + > + writel(reg, priv->control); > + > + /* Enable the sensor */ > + reg = readl_relaxed(priv->sensor); > + reg &= ~PMU_TM_DISABLE_MASK; > + writel(reg, priv->sensor); > +} > + > +static void armada370_init_sensor(struct armada_thermal_priv *priv) > +{ > + unsigned long reg; > + > + reg = readl_relaxed(priv->control); > + reg |= PMU_TDC0_OTF_CAL_MASK; > + writel(reg, priv->control); > + > + /* Reference calibration value */ > + reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; > + reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); > + writel(reg, priv->control); > + > + reg &= ~PMU_TDC0_START_CAL_MASK; > + writel(reg, priv->control); > + > + mdelay(10); > +} > + > +static bool armada_is_valid(struct armada_thermal_priv *priv) > +{ > + unsigned long reg = readl_relaxed(priv->sensor); > + > + return (reg >> THERMAL_VALID_OFFSET) & THERMAL_VALID_MASK; > +} > + > +static int armada_get_temp(struct thermal_zone_device *thermal, > + unsigned long *temp) > +{ > + struct armada_thermal_priv *priv = thermal->devdata; > + unsigned long reg; > + > + /* Valid check */ > + if (priv->ops->is_valid && !priv->ops->is_valid(priv)) { > + dev_err(&thermal->device, > + "Temperature sensor reading not valid\n"); > + return -EIO; > + } > + > + reg = readl_relaxed(priv->sensor); > + reg = (reg >> THERMAL_TEMP_OFFSET) & THERMAL_TEMP_MASK; > + *temp = (3153000000UL - (10000000UL*reg)) / 13825; > + return 0; > +} > + > +static struct thermal_zone_device_ops ops = { > + .get_temp = armada_get_temp, > +}; > + > +static const struct armada_thermal_ops armadaxp_ops = { > + .init_sensor = armadaxp_init_sensor, > +}; > + > +static const struct armada_thermal_ops armada370_ops = { > + .is_valid = armada_is_valid, > + .init_sensor = armada370_init_sensor, > +}; > + > +static const struct of_device_id armada_thermal_id_table[] = { > + { > + .compatible = "marvell,armadaxp-thermal", > + .data = &armadaxp_ops, > + }, > + { > + .compatible = "marvell,armada370-thermal", > + .data = &armada370_ops, > + }, > + { > + /* sentinel */ > + }, > +}; > +MODULE_DEVICE_TABLE(of, armada_thermal_id_table); > + > +static int armada_thermal_probe(struct platform_device *pdev) > +{ > + struct thermal_zone_device *thermal; > + const struct of_device_id *match; > + struct armada_thermal_priv *priv; > + struct resource *res; > + > + match = of_match_device(armada_thermal_id_table, &pdev->dev); > + if (!match) > + return -ENODEV; > + > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "Failed to get platform resource\n"); > + return -ENODEV; > + } > + > + priv->sensor = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(priv->sensor)) > + return PTR_ERR(priv->sensor); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + if (!res) { > + dev_err(&pdev->dev, "Failed to get platform resource\n"); > + return -ENODEV; > + } > + > + priv->control = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(priv->control)) > + return PTR_ERR(priv->control); > + > + priv->ops = (struct armada_thermal_ops *)match->data; > + priv->ops->init_sensor(priv); > + > + thermal = thermal_zone_device_register("armada_thermal", 0, 0, > + priv, &ops, NULL, 0, 0); > + if (IS_ERR(thermal)) { > + dev_err(&pdev->dev, > + "Failed to register thermal zone device\n"); > + return PTR_ERR(thermal); > + } > + > + platform_set_drvdata(pdev, thermal); > + > + return 0; > +} > + > +static int armada_thermal_exit(struct platform_device *pdev) > +{ > + struct thermal_zone_device *armada_thermal = > + platform_get_drvdata(pdev); > + > + thermal_zone_device_unregister(armada_thermal); > + platform_set_drvdata(pdev, NULL); > + > + return 0; > +} > + > +static struct platform_driver armada_thermal_driver = { > + .probe = armada_thermal_probe, > + .remove = armada_thermal_exit, > + .driver = { > + .name = "armada_thermal", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(armada_thermal_id_table), > + }, > +}; > + > +module_platform_driver(armada_thermal_driver); > + > +MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>"); > +MODULE_DESCRIPTION("Armada 370/XP thermal driver"); > +MODULE_LICENSE("GPL v2"); > ------------------------------------>8---------------------------------------- > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 02, 2013 at 09:05:10PM +0800, Zhang Rui wrote: > On Mon, 2013-04-01 at 22:37 -0300, Ezequiel Garcia wrote: > > Hi Zhang, > > > > On Thu, Mar 28, 2013 at 09:43:37AM +0800, Zhang Rui wrote: > > > On Tue, 2013-03-26 at 07:16 -0300, Ezequiel Garcia wrote: > > > > This driver supports both Armada 370 and Armada XP SoC > > > > thermal management controllers. > > > > > > > > Armada 370 has a register to check a valid temperature, whereas > > > > Armada XP does not. Each has a different initialization (i.e. calibration) > > > > function. The temperature conversion formula is the same for both. > > > > > > > > The controller present in each SoC have a very similar feature set, > > > > so it corresponds to have one driver to support both of them. > > > > > > > > Although this driver may present similarities to Dove and Kirkwood > > > > thermal driver, the exact differences and coincidences are not fully > > > > known. For this reason, support is given through a separate driver. > > > > > > > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > > patch applied. > Great, thank you! Which branch have you applied this?
Hi Zhang, On Tue, Apr 02, 2013 at 09:05:10PM +0800, Zhang Rui wrote: > On Mon, 2013-04-01 at 22:37 -0300, Ezequiel Garcia wrote: > > On Thu, Mar 28, 2013 at 09:43:37AM +0800, Zhang Rui wrote: > > > On Tue, 2013-03-26 at 07:16 -0300, Ezequiel Garcia wrote: > > > > This driver supports both Armada 370 and Armada XP SoC > > > > thermal management controllers. > > > > > > > > Armada 370 has a register to check a valid temperature, whereas > > > > Armada XP does not. Each has a different initialization (i.e. calibration) > > > > function. The temperature conversion formula is the same for both. > > > > > > > > The controller present in each SoC have a very similar feature set, > > > > so it corresponds to have one driver to support both of them. > > > > > > > > Although this driver may present similarities to Dove and Kirkwood > > > > thermal driver, the exact differences and coincidences are not fully > > > > known. For this reason, support is given through a separate driver. > > > > > > > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > > patch applied. > I'm not seeing this patch applied on any branch. Where have you applied this? Or perhaps there's anything left to fix?
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt new file mode 100644 index 0000000..fff93d5 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -0,0 +1,22 @@ +* Marvell Armada 370/XP thermal management + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-thermal + marvell,armadaxp-thermal + +- reg: Device's register space. + Two entries are expected, see the examples below. + The first one is required for the sensor register; + the second one is required for the control register + to be used for sensor initialization (a.k.a. calibration). + +Example: + + thermal@d0018300 { + compatible = "marvell,armada370-thermal"; + reg = <0xd0018300 0x4 + 0xd0018304 0x4>; + status = "okay"; + }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index a764f16..9eddf74 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -144,6 +144,14 @@ config DB8500_THERMAL created. Cooling devices can be bound to the trip points to cool this thermal zone if trip points reached. +config ARMADA_THERMAL + tristate "Armada 370/XP thermal management" + depends on ARCH_MVEBU + depends on OF + help + Enable this option if you want to have support for thermal management + controller present in Armada 370 and Armada XP SoC. + config DB8500_CPUFREQ_COOLING tristate "DB8500 cpufreq cooling" depends on ARCH_U8500 diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index d3a2b38..7f6509a 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o +obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c new file mode 100644 index 0000000..5b4d75f --- /dev/null +++ b/drivers/thermal/armada_thermal.c @@ -0,0 +1,232 @@ +/* + * Marvell Armada 370/XP thermal sensor driver + * + * Copyright (C) 2013 Marvell + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/thermal.h> + +#define THERMAL_VALID_OFFSET 9 +#define THERMAL_VALID_MASK 0x1 +#define THERMAL_TEMP_OFFSET 10 +#define THERMAL_TEMP_MASK 0x1ff + +/* Thermal Manager Control and Status Register */ +#define PMU_TDC0_SW_RST_MASK (0x1 << 1) +#define PMU_TM_DISABLE_OFFS 0 +#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS) +#define PMU_TDC0_REF_CAL_CNT_OFFS 11 +#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS) +#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30) +#define PMU_TDC0_START_CAL_MASK (0x1 << 25) + +struct armada_thermal_ops; + +/* Marvell EBU Thermal Sensor Dev Structure */ +struct armada_thermal_priv { + void __iomem *sensor; + void __iomem *control; + struct armada_thermal_ops *ops; +}; + +struct armada_thermal_ops { + /* Initialize the sensor */ + void (*init_sensor)(struct armada_thermal_priv *); + + /* Test for a valid sensor value (optional) */ + bool (*is_valid)(struct armada_thermal_priv *); +}; + +static void armadaxp_init_sensor(struct armada_thermal_priv *priv) +{ + unsigned long reg; + + reg = readl_relaxed(priv->control); + reg |= PMU_TDC0_OTF_CAL_MASK; + writel(reg, priv->control); + + /* Reference calibration value */ + reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; + reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); + writel(reg, priv->control); + + /* Reset the sensor */ + reg = readl_relaxed(priv->control); + writel((reg | PMU_TDC0_SW_RST_MASK), priv->control); + + writel(reg, priv->control); + + /* Enable the sensor */ + reg = readl_relaxed(priv->sensor); + reg &= ~PMU_TM_DISABLE_MASK; + writel(reg, priv->sensor); +} + +static void armada370_init_sensor(struct armada_thermal_priv *priv) +{ + unsigned long reg; + + reg = readl_relaxed(priv->control); + reg |= PMU_TDC0_OTF_CAL_MASK; + writel(reg, priv->control); + + /* Reference calibration value */ + reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; + reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); + writel(reg, priv->control); + + reg &= ~PMU_TDC0_START_CAL_MASK; + writel(reg, priv->control); + + mdelay(10); +} + +static bool armada_is_valid(struct armada_thermal_priv *priv) +{ + unsigned long reg = readl_relaxed(priv->sensor); + + return (reg >> THERMAL_VALID_OFFSET) & THERMAL_VALID_MASK; +} + +static int armada_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct armada_thermal_priv *priv = thermal->devdata; + unsigned long reg; + + /* Valid check */ + if (priv->ops->is_valid && !priv->ops->is_valid(priv)) { + dev_err(&thermal->device, + "Temperature sensor reading not valid\n"); + return -EIO; + } + + reg = readl_relaxed(priv->sensor); + reg = (reg >> THERMAL_TEMP_OFFSET) & THERMAL_TEMP_MASK; + *temp = (3153000000UL - (10000000UL*reg)) / 13825; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = armada_get_temp, +}; + +static const struct armada_thermal_ops armadaxp_ops = { + .init_sensor = armadaxp_init_sensor, +}; + +static const struct armada_thermal_ops armada370_ops = { + .is_valid = armada_is_valid, + .init_sensor = armada370_init_sensor, +}; + +static const struct of_device_id armada_thermal_id_table[] = { + { + .compatible = "marvell,armadaxp-thermal", + .data = &armadaxp_ops, + }, + { + .compatible = "marvell,armada370-thermal", + .data = &armada370_ops, + }, + { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, armada_thermal_id_table); + +static int armada_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *thermal; + const struct of_device_id *match; + struct armada_thermal_priv *priv; + struct resource *res; + + match = of_match_device(armada_thermal_id_table, &pdev->dev); + if (!match) + return -ENODEV; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get platform resource\n"); + return -ENODEV; + } + + priv->sensor = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->sensor)) + return PTR_ERR(priv->sensor); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "Failed to get platform resource\n"); + return -ENODEV; + } + + priv->control = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->control)) + return PTR_ERR(priv->control); + + priv->ops = (struct armada_thermal_ops *)match->data; + priv->ops->init_sensor(priv); + + thermal = thermal_zone_device_register("armada_thermal", 0, 0, + priv, &ops, NULL, 0, 0); + if (IS_ERR(thermal)) { + dev_err(&pdev->dev, + "Failed to register thermal zone device\n"); + return PTR_ERR(thermal); + } + + platform_set_drvdata(pdev, thermal); + + return 0; +} + +static int armada_thermal_exit(struct platform_device *pdev) +{ + struct thermal_zone_device *armada_thermal = + platform_get_drvdata(pdev); + + thermal_zone_device_unregister(armada_thermal); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver armada_thermal_driver = { + .probe = armada_thermal_probe, + .remove = armada_thermal_exit, + .driver = { + .name = "armada_thermal", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(armada_thermal_id_table), + }, +}; + +module_platform_driver(armada_thermal_driver); + +MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>"); +MODULE_DESCRIPTION("Armada 370/XP thermal driver"); +MODULE_LICENSE("GPL v2");