diff mbox

mmc: atmel-mci: pio hang on block errors

Message ID 1363771946-8931-1-git-send-email-ludovic.desroches@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ludovic Desroches March 20, 2013, 9:32 a.m. UTC
From: Terry Barnaby <terry@beam.ltd.uk>

The driver is doing, by default, multi-block reads. When a block error occurs
card/block.c instigates a single block read: "mmcblk0: retrying using single
block read".
It leaves the sg chain intact and just changes the length attribute for the
first sg entry and the overall sg_len parameter. When atmci_read_data_pio is
called to read the single block of data it ignores the sg_len and expects to
read more than 512 bytes as it sees there are multiple items in the sg list. No
more data comes as the controller has only been commanded to get one block.

Signed-off-by: Terry Barnaby <terry@beam.ltd.uk>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.2+
---
 drivers/mmc/host/atmel-mci.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

Comments

Ludovic Desroches April 8, 2013, 4:02 p.m. UTC | #1
Hi Chris,

Could you take this fix? If there are no objections of course.

Regards

Ludovic

On Wed, Mar 20, 2013 at 10:32:26AM +0100, ludovic.desroches@atmel.com wrote:
> From: Terry Barnaby <terry@beam.ltd.uk>
> 
> The driver is doing, by default, multi-block reads. When a block error occurs
> card/block.c instigates a single block read: "mmcblk0: retrying using single
> block read".
> It leaves the sg chain intact and just changes the length attribute for the
> first sg entry and the overall sg_len parameter. When atmci_read_data_pio is
> called to read the single block of data it ignores the sg_len and expects to
> read more than 512 bytes as it sees there are multiple items in the sg list. No
> more data comes as the controller has only been commanded to get one block.
> 
> Signed-off-by: Terry Barnaby <terry@beam.ltd.uk>
> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Cc: stable <stable@vger.kernel.org> # 3.2+
> ---
>  drivers/mmc/host/atmel-mci.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index 0932024..d98e68e 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -163,6 +163,7 @@ struct atmel_mci {
>  	void __iomem		*regs;
>  
>  	struct scatterlist	*sg;
> +	unsigned int		sg_len;
>  	unsigned int		pio_offset;
>  
>  	struct atmel_mci_slot	*cur_slot;
> @@ -751,6 +752,7 @@ static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
>  	data->error = -EINPROGRESS;
>  
>  	host->sg = data->sg;
> +	host->sg_len = data->sg_len;
>  	host->data = data;
>  	host->data_chan = NULL;
>  
> @@ -1573,7 +1575,8 @@ static void atmci_read_data_pio(struct atmel_mci *host)
>  			if (offset == sg->length) {
>  				flush_dcache_page(sg_page(sg));
>  				host->sg = sg = sg_next(sg);
> -				if (!sg)
> +				host->sg_len--;
> +				if (!sg || !host->sg_len)
>  					goto done;
>  
>  				offset = 0;
> @@ -1586,7 +1589,8 @@ static void atmci_read_data_pio(struct atmel_mci *host)
>  
>  			flush_dcache_page(sg_page(sg));
>  			host->sg = sg = sg_next(sg);
> -			if (!sg)
> +			host->sg_len--;
> +			if (!sg || !host->sg_len)
>  				goto done;
>  
>  			offset = 4 - remaining;
> @@ -1640,7 +1644,8 @@ static void atmci_write_data_pio(struct atmel_mci *host)
>  			nbytes += 4;
>  			if (offset == sg->length) {
>  				host->sg = sg = sg_next(sg);
> -				if (!sg)
> +				host->sg_len--;
> +				if (!sg || !host->sg_len)
>  					goto done;
>  
>  				offset = 0;
> @@ -1654,7 +1659,8 @@ static void atmci_write_data_pio(struct atmel_mci *host)
>  			nbytes += remaining;
>  
>  			host->sg = sg = sg_next(sg);
> -			if (!sg) {
> +			host->sg_len--;
> +			if (!sg || !host->sg_len) {
>  				atmci_writel(host, ATMCI_TDR, value);
>  				goto done;
>  			}
> -- 
> 1.7.11.3
>
Chris Ball April 8, 2013, 4:07 p.m. UTC | #2
Hi,

On Mon, Apr 08 2013, Ludovic Desroches wrote:
> Could you take this fix? If there are no objections of course.

Thanks for the reminder; pushed to mmc-next now.

- Chris.
diff mbox

Patch

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 0932024..d98e68e 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -163,6 +163,7 @@  struct atmel_mci {
 	void __iomem		*regs;
 
 	struct scatterlist	*sg;
+	unsigned int		sg_len;
 	unsigned int		pio_offset;
 
 	struct atmel_mci_slot	*cur_slot;
@@ -751,6 +752,7 @@  static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
 	data->error = -EINPROGRESS;
 
 	host->sg = data->sg;
+	host->sg_len = data->sg_len;
 	host->data = data;
 	host->data_chan = NULL;
 
@@ -1573,7 +1575,8 @@  static void atmci_read_data_pio(struct atmel_mci *host)
 			if (offset == sg->length) {
 				flush_dcache_page(sg_page(sg));
 				host->sg = sg = sg_next(sg);
-				if (!sg)
+				host->sg_len--;
+				if (!sg || !host->sg_len)
 					goto done;
 
 				offset = 0;
@@ -1586,7 +1589,8 @@  static void atmci_read_data_pio(struct atmel_mci *host)
 
 			flush_dcache_page(sg_page(sg));
 			host->sg = sg = sg_next(sg);
-			if (!sg)
+			host->sg_len--;
+			if (!sg || !host->sg_len)
 				goto done;
 
 			offset = 4 - remaining;
@@ -1640,7 +1644,8 @@  static void atmci_write_data_pio(struct atmel_mci *host)
 			nbytes += 4;
 			if (offset == sg->length) {
 				host->sg = sg = sg_next(sg);
-				if (!sg)
+				host->sg_len--;
+				if (!sg || !host->sg_len)
 					goto done;
 
 				offset = 0;
@@ -1654,7 +1659,8 @@  static void atmci_write_data_pio(struct atmel_mci *host)
 			nbytes += remaining;
 
 			host->sg = sg = sg_next(sg);
-			if (!sg) {
+			host->sg_len--;
+			if (!sg || !host->sg_len) {
 				atmci_writel(host, ATMCI_TDR, value);
 				goto done;
 			}