@@ -83,7 +83,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config IMX_HAVE_PLATFORM_SPI_IMX
bool
-
-config IMX_HAVE_PLATFORM_AHCI
- bool
- default y if ARCH_MX53
@@ -27,4 +27,3 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o
deleted file mode 100644
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_ahci_imx_data_entry_single(soc, _devid) \
- { \
- .devid = _devid, \
- .iobase = soc ## _SATA_BASE_ADDR, \
- .irq = soc ## _INT_SATA, \
- }
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
- imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
-#endif
-
-enum {
- HOST_CAP = 0x00,
- HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
- HOST_PORTS_IMPL = 0x0c,
- HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
-};
-
-static struct clk *sata_clk, *sata_ref_clk;
-
-/* AHCI module Initialization, if return 0, initialization is successful. */
-static int imx_sata_init(struct device *dev, void __iomem *addr)
-{
- u32 tmpdata;
- int ret = 0;
- struct clk *clk;
-
- sata_clk = clk_get(dev, "ahci");
- if (IS_ERR(sata_clk)) {
- dev_err(dev, "no sata clock.\n");
- return PTR_ERR(sata_clk);
- }
- ret = clk_prepare_enable(sata_clk);
- if (ret) {
- dev_err(dev, "can't prepare/enable sata clock.\n");
- goto put_sata_clk;
- }
-
- /* Get the AHCI SATA PHY CLK */
- sata_ref_clk = clk_get(dev, "ahci_phy");
- if (IS_ERR(sata_ref_clk)) {
- dev_err(dev, "no sata ref clock.\n");
- ret = PTR_ERR(sata_ref_clk);
- goto release_sata_clk;
- }
- ret = clk_prepare_enable(sata_ref_clk);
- if (ret) {
- dev_err(dev, "can't prepare/enable sata ref clock.\n");
- goto put_sata_ref_clk;
- }
-
- /* Get the AHB clock rate, and configure the TIMER1MS reg later */
- clk = clk_get(dev, "ahci_dma");
- if (IS_ERR(clk)) {
- dev_err(dev, "no dma clock.\n");
- ret = PTR_ERR(clk);
- goto release_sata_ref_clk;
- }
- tmpdata = clk_get_rate(clk) / 1000;
- clk_put(clk);
-
- writel(tmpdata, addr + HOST_TIMER1MS);
-
- tmpdata = readl(addr + HOST_CAP);
- if (!(tmpdata & HOST_CAP_SSS)) {
- tmpdata |= HOST_CAP_SSS;
- writel(tmpdata, addr + HOST_CAP);
- }
-
- if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
- writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
- addr + HOST_PORTS_IMPL);
-
- return 0;
-
-release_sata_ref_clk:
- clk_disable_unprepare(sata_ref_clk);
-put_sata_ref_clk:
- clk_put(sata_ref_clk);
-release_sata_clk:
- clk_disable_unprepare(sata_clk);
-put_sata_clk:
- clk_put(sata_clk);
-
- return ret;
-}
-
-static void imx_sata_exit(struct device *dev)
-{
- clk_disable_unprepare(sata_ref_clk);
- clk_put(sata_ref_clk);
-
- clk_disable_unprepare(sata_clk);
- clk_put(sata_clk);
-
-}
-struct platform_device *__init imx_add_ahci_imx(
- const struct imx_ahci_imx_data *data,
- const struct ahci_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device_dmamask(data->devid, 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-
-struct platform_device *__init imx53_add_ahci_imx(void)
-{
- struct ahci_platform_data pdata = {
- .init = imx_sata_init,
- .exit = imx_sata_exit,
- };
-
- return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
-}
@@ -329,13 +329,3 @@ struct platform_device *__init imx_add_spi_imx(
struct platform_device *imx_add_imx_dma(void);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
-
-#include <linux/ahci_platform.h>
-struct imx_ahci_imx_data {
- const char *devid;
- resource_size_t iobase;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_ahci_imx(
- const struct imx_ahci_imx_data *data,
- const struct ahci_platform_data *pdata);
The i.MX53 ahci platform support is unused in mainline. To demotivate people using it just remove it from the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- Paul, with this one applied you could also remove config ARCH_MX53. arch/arm/plat-mxc/devices/Kconfig | 4 - arch/arm/plat-mxc/devices/Makefile | 1 - arch/arm/plat-mxc/devices/platform-ahci-imx.c | 156 ------------------------ arch/arm/plat-mxc/include/mach/devices-common.h | 10 -- 4 files changed, 171 deletions(-) delete mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c