| Message ID | 20090504195201.6ECF52C415B@tippex.mynet.homeunix.org (mailing list archive) |
|---|---|
| State | RFC |
| Headers | show |
Hi, Am Montag, den 04.05.2009, 21:52 +0200 schrieb Anders Eriksson: > > Hi hermann, > > hermann-pitton@arcor.de said: > > There is no way to detect which sort of such a LNA circuitry is employed. > > Just try and error and pray. Also no further documentation for the changing > > code itself and only some comments by Hartmut on the lists. > > > > In case config = 1 gpio0 of the tda827x is involved, on others a gpio pin of > > the saa7134 and some registers. > > > > It was already broken when tuner callback stuff for XCeive tuners was > > introduced and firmware loading for those. > > > > Guess the problem is to get the gpio change to the tda827x through. > > > > Hartmut came up with this fix that time you get with "hg export 7393". > > (attached) > > > > I did not even have any such a LNA device at this time, but might be > > interesting if this snapshot really works for you. Still have only one type 2 > > device now. > > > > If I look through hg log > hg.log, the only somehow related later change by > > Hartmut was this one. (link points to Hartmut's repo) > > > > http://linuxtv.org/hg/~hhackmann/v4l-dvb/rev/779169257208 > > > > And last entry is that compile warning fix on top for int mask not removed at > > once. Should all be only saa7134 gpio related. > > I had a look at the diff you attached, and it made me a bit confuse. Most > (all?) of it seem to be already applied in later kernels (>2.6.26), and they > all fail on me. hmm, the idea eventually was, to download these two snapshots, or make the last few changes manually on the first and try on 2.6.25. Then we might know, if the problem is already visible within Hartmut's latest fix attempts or even more and other stuff is involved. "make rmmod" and save the original modules media folder. Then "make" and "make install" and you get a new one. The same way you can restore your old working media folder by putting it back in place and "depmod -a". You can click on top of the site on bz2 or gz to get such a snapshot. http://linuxtv.org/hg/v4l-dvb/rev/49ba58715fe0 > however, looking through the diff, I sumbled on the dprink's and I started to > enable them on all modules I thought relevant. Here's a diff between the last > -good and first-bad commit. The salient differences I can see is the "AGC2 gain" > and the "setting GPIO22 to vsync 0". I have no clue what they mean, but my > next step is to see if I can kill these differences. > > Is thee anything else in there which you find note worthy? -saa7133[0]/core: setting GPIO22 to vsync 0 This saa7133 GPIO22 setting is related to LNA configuration. The code has changed, doesn't print the above anymore and became a tuner callback. Maybe related. > Rgds, > /Anders > PS What is the tda829x doing? I see some differences there too. It is the analog demodulator within the saa7131e, controls the i2c gate to the tda8275a silicon tuner and gpio0 on it is involved in type 1 LNA control, according the comments. (details under NDA i don't have) > > $ diff -u dmesg_2.6.25-03{6,7}* > --- dmesg_2.6.25-03622-g1fe87369 2009-05-04 21:32:37.000000000 +0200 > +++ dmesg_2.6.25-03774-g99e09ea 2009-05-04 21:37:06.000000000 +0200 > @@ -42,14 +42,13 @@ > tda829x 1-004b: tda827xa config is 0x01 > tda827x: setting tda827x to system xx > tda827x: setting LNA to high gain > -saa7133[0]/core: setting GPIO22 to vsync 0 > -tda827x: AGC2 gain is: 3 > +tda827x: AGC2 gain is: 10 > tda829x 1-004b: tda8290 not locked, no signal? > tda829x 1-004b: tda8290 not locked, no signal? > tda829x 1-004b: tda8290 not locked, no signal? > -tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 0, lock: 0 > -tda829x 1-004b: adjust gain, step 2. Agc: 131, lock: 0 > -tda829x 1-004b: adjust gain, step 3. Agc: 44 > +tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 > +tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 > +tda829x 1-004b: adjust gain, step 3. Agc: 235 > tuner' 1-004b: saa7133[0] tuner' I2C addr 0x96 with type 54 used for 0x0e > saa7133[0]/core: hwinit2 > tuner' 1-004b: switching to v4l2 > @@ -58,8 +57,7 @@ > tda829x 1-004b: tda827xa config is 0x01 > tda827x: setting tda827x to system B > tda827x: setting LNA to high gain > -saa7133[0]/core: setting GPIO22 to vsync 0 > -tda827x: AGC2 gain is: 3 > +tda827x: AGC2 gain is: 10 > tda829x 1-004b: tda8290 not locked, no signal? [snip] Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
hermann-pitton@arcor.de said: > hmm, the idea eventually was, to download these two snapshots, or make the > last few changes manually on the first and try on 2.6.25. > > Then we might know, if the problem is already visible within Hartmut's latest > fix attempts or even more and other stuff is involved. I see. I'll dig myself into hand applying those patches. It seems quite some stuff changed between 2.6.25 and what those patches assumes. Let's see what I dig up. BR, -Anders -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- dmesg_2.6.25-03622-g1fe87369 2009-05-04 21:32:37.000000000 +0200 +++ dmesg_2.6.25-03774-g99e09ea 2009-05-04 21:37:06.000000000 +0200 @@ -42,14 +42,13 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system xx tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? -tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 0, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 131, lock: 0 -tda829x 1-004b: adjust gain, step 3. Agc: 44 +tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 +tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 235 tuner' 1-004b: saa7133[0] tuner' I2C addr 0x96 with type 54 used for 0x0e saa7133[0]/core: hwinit2 tuner' 1-004b: switching to v4l2 @@ -58,8 +57,7 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? @@ -68,14 +66,13 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: adjust gain, step 1. Agc: 136, ADC stat: 40, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 0, lock: 0 -tda829x 1-004b: adjust gain, step 3. Agc: 248 +tda829x 1-004b: adjust gain, step 2. Agc: 126, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 35 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 @@ -90,15 +87,19 @@ DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 tda1004x: setting up plls for 48MHz sampling clock -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 +tda1004x: found firmware revision 20 -- ok +tda827x: tda827xa tuner found +tda827x: tda827xa_sleep: +saa7134 ALSA driver for DMA sound loaded +saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 registered as card -1 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 -tda829x 1-004b: adjust gain, step 3. Agc: 202 +tda829x 1-004b: adjust gain, step 2. Agc: 128, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 128 tuner' 1-004b: Cmd TUNER_SET_STANDBY accepted for analog TV tuner' 1-004b: Cmd VIDIOC_S_STD accepted for analog TV tuner' 1-004b: tv freq set to 400.00 @@ -106,17 +107,13 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 -tda827x: AGC2 gain is: 3 +tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? -tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 0, lock: 0 -tda829x 1-004b: adjust gain, step 2. Agc: 135, lock: 0 -tda1004x: timeout waiting for DSP ready -tda1004x: found firmware revision 0 -- invalid -tda1004x: trying to boot from eeprom -tda829x 1-004b: adjust gain, step 3. Agc: 22 +tda829x 1-004b: adjust gain, step 1. Agc: 0, ADC stat: 1, lock: 0 +tda829x 1-004b: adjust gain, step 2. Agc: 255, lock: 0 +tda829x 1-004b: adjust gain, step 3. Agc: 243 tuner' 1-004b: Cmd TUNER_SET_STANDBY accepted for analog TV tuner' 1-004b: Cmd AUDC_SET_RADIO accepted for radio tuner' 1-004b: radio freq set to 87.50 @@ -124,18 +121,8 @@ tda829x 1-004b: tda827xa config is 0x01 tda827x: setting tda827x to system B tda827x: setting LNA to high gain -saa7133[0]/core: setting GPIO22 to vsync 0 tda827x: AGC2 gain is: 10 tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tda829x 1-004b: tda8290 not locked, no signal? tuner' 1-004b: Cmd TUNER_SET_STANDBY accepted for radio -tda1004x: timeout waiting for DSP ready -tda1004x: found firmware revision 0 -- invalid -tda1004x: waiting for firmware upload... -tda1004x: found firmware revision 20 -- ok -tda827x: tda827xa tuner found -tda827x: tda827xa_sleep: -saa7134 ALSA driver for DMA sound loaded -saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 registered as card -1 -