Message ID | 1366362877-15446-4-git-send-email-daniel.vetter@ffwll.ch (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Apr 19, 2013 at 11:14:33AM +0200, Daniel Vetter wrote: > With the exception of hsw, which has dedicated DP clocks which run at > the fixed frequency already, and vlv, which doesn't have optmized > pre-defined dp clock parameters (yet). So it looks like were still going through the full compute clocks thing, which will possibly produce something different, and then we overwrite it with the fixed clocks afterwards. I'm assuming that's just a transitional issue and will get fixed later. The only real concern I had was that the fixed clocks don't include the derived m factor for example, but it looks like we shouldn't need that except for the LVDS reduced clock thing. So yeah, I think it should be OK. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > > Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> > Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> > --- > drivers/gpu/drm/i915/intel_display.c | 97 +----------------------------------- > drivers/gpu/drm/i915/intel_dp.c | 45 +++++++++++++++++ > 2 files changed, 46 insertions(+), 96 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index 5437a5e..d91bad8 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -114,15 +114,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, > intel_clock_t *best_clock); > > static bool > -intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, > - int target, int refclk, intel_clock_t *match_clock, > - intel_clock_t *best_clock); > -static bool > -intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, > - int target, int refclk, intel_clock_t *match_clock, > - intel_clock_t *best_clock); > - > -static bool > intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, > int target, int refclk, intel_clock_t *match_clock, > intel_clock_t *best_clock); > @@ -254,20 +245,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { > .find_pll = intel_g4x_find_best_PLL, > }; > > -static const intel_limit_t intel_limits_g4x_display_port = { > - .dot = { .min = 161670, .max = 227000 }, > - .vco = { .min = 1750000, .max = 3500000}, > - .n = { .min = 1, .max = 2 }, > - .m = { .min = 97, .max = 108 }, > - .m1 = { .min = 0x10, .max = 0x12 }, > - .m2 = { .min = 0x05, .max = 0x06 }, > - .p = { .min = 10, .max = 20 }, > - .p1 = { .min = 1, .max = 2}, > - .p2 = { .dot_limit = 0, > - .p2_slow = 10, .p2_fast = 10 }, > - .find_pll = intel_find_pll_g4x_dp, > -}; > - > static const intel_limit_t intel_limits_pineview_sdvo = { > .dot = { .min = 20000, .max = 400000}, > .vco = { .min = 1700000, .max = 3500000 }, > @@ -374,20 +351,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { > .find_pll = intel_g4x_find_best_PLL, > }; > > -static const intel_limit_t intel_limits_ironlake_display_port = { > - .dot = { .min = 25000, .max = 350000 }, > - .vco = { .min = 1760000, .max = 3510000}, > - .n = { .min = 1, .max = 2 }, > - .m = { .min = 81, .max = 90 }, > - .m1 = { .min = 12, .max = 22 }, > - .m2 = { .min = 5, .max = 9 }, > - .p = { .min = 10, .max = 20 }, > - .p1 = { .min = 1, .max = 2}, > - .p2 = { .dot_limit = 0, > - .p2_slow = 10, .p2_fast = 10 }, > - .find_pll = intel_find_pll_ironlake_dp, > -}; > - > static const intel_limit_t intel_limits_vlv_dac = { > .dot = { .min = 25000, .max = 270000 }, > .vco = { .min = 4000000, .max = 6000000 }, > @@ -485,10 +448,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, > else > limit = &intel_limits_ironlake_single_lvds; > } > - } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || > - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) > - limit = &intel_limits_ironlake_display_port; > - else > + } else > limit = &intel_limits_ironlake_dac; > > return limit; > @@ -509,8 +469,6 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) > limit = &intel_limits_g4x_hdmi; > } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { > limit = &intel_limits_g4x_sdvo; > - } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { > - limit = &intel_limits_g4x_display_port; > } else /* The option is for other outputs */ > limit = &intel_limits_i9xx_sdvo; > > @@ -758,59 +716,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, > } > > static bool > -intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, > - int target, int refclk, intel_clock_t *match_clock, > - intel_clock_t *best_clock) > -{ > - struct drm_device *dev = crtc->dev; > - intel_clock_t clock; > - > - if (target < 200000) { > - clock.n = 1; > - clock.p1 = 2; > - clock.p2 = 10; > - clock.m1 = 12; > - clock.m2 = 9; > - } else { > - clock.n = 2; > - clock.p1 = 1; > - clock.p2 = 10; > - clock.m1 = 14; > - clock.m2 = 8; > - } > - intel_clock(dev, refclk, &clock); > - memcpy(best_clock, &clock, sizeof(intel_clock_t)); > - return true; > -} > - > -/* DisplayPort has only two frequencies, 162MHz and 270MHz */ > -static bool > -intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, > - int target, int refclk, intel_clock_t *match_clock, > - intel_clock_t *best_clock) > -{ > - intel_clock_t clock; > - if (target < 200000) { > - clock.p1 = 2; > - clock.p2 = 10; > - clock.n = 2; > - clock.m1 = 23; > - clock.m2 = 8; > - } else { > - clock.p1 = 1; > - clock.p2 = 10; > - clock.n = 1; > - clock.m1 = 14; > - clock.m2 = 2; > - } > - clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); > - clock.p = (clock.p1 * clock.p2); > - clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; > - clock.vco = 0; > - memcpy(best_clock, &clock, sizeof(intel_clock_t)); > - return true; > -} > -static bool > intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, > int target, int refclk, intel_clock_t *match_clock, > intel_clock_t *best_clock) > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c > index b55f3ec..b1a3a64 100644 > --- a/drivers/gpu/drm/i915/intel_dp.c > +++ b/drivers/gpu/drm/i915/intel_dp.c > @@ -660,6 +660,49 @@ intel_dp_i2c_init(struct intel_dp *intel_dp, > return ret; > } > > +static void > +intel_dp_set_clock(struct intel_encoder *encoder, > + struct intel_crtc_config *pipe_config, int link_bw) > +{ > + struct drm_device *dev = encoder->base.dev; > + > + if (IS_G4X(dev)) { > + if (link_bw == DP_LINK_BW_1_62) { > + pipe_config->dpll.p1 = 2; > + pipe_config->dpll.p2 = 10; > + pipe_config->dpll.n = 2; > + pipe_config->dpll.m1 = 23; > + pipe_config->dpll.m2 = 8; > + } else { > + pipe_config->dpll.p1 = 1; > + pipe_config->dpll.p2 = 10; > + pipe_config->dpll.n = 1; > + pipe_config->dpll.m1 = 14; > + pipe_config->dpll.m2 = 2; > + } > + pipe_config->clock_set = true; > + } else if (IS_HASWELL(dev)) { > + /* Haswell has special-purpose DP DDI clocks. */ > + } else if (HAS_PCH_SPLIT(dev)) { > + if (link_bw == DP_LINK_BW_1_62) { > + pipe_config->dpll.n = 1; > + pipe_config->dpll.p1 = 2; > + pipe_config->dpll.p2 = 10; > + pipe_config->dpll.m1 = 12; > + pipe_config->dpll.m2 = 9; > + } else { > + pipe_config->dpll.n = 2; > + pipe_config->dpll.p1 = 1; > + pipe_config->dpll.p2 = 10; > + pipe_config->dpll.m1 = 14; > + pipe_config->dpll.m2 = 8; > + } > + pipe_config->clock_set = true; > + } else if (IS_VALLEYVIEW(dev)) { > + /* FIXME: Need to figure out optimized DP clocks for vlv. */ > + } > +} > + > bool > intel_dp_compute_config(struct intel_encoder *encoder, > struct intel_crtc_config *pipe_config) > @@ -765,6 +808,8 @@ found: > } > pipe_config->pipe_bpp = bpp; > > + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); > + > return true; > } > > -- > 1.7.11.7 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Thu, Apr 25, 2013 at 02:34:39PM +0300, Ville Syrjälä wrote: > On Fri, Apr 19, 2013 at 11:14:33AM +0200, Daniel Vetter wrote: > > With the exception of hsw, which has dedicated DP clocks which run at > > the fixed frequency already, and vlv, which doesn't have optmized > > pre-defined dp clock parameters (yet). > > So it looks like were still going through the full compute clocks thing, > which will possibly produce something different, and then we overwrite it > with the fixed clocks afterwards. I'm assuming that's just a transitional > issue and will get fixed later. Yeah, I guess I should have spilled a few more words about where I eventually want to end up with this. So ultimately my idea is that in the compute config stage first the crtc code puts the default platform pll limits into the pipe_config. Then encoders can either overwrite that limit structure with their own special stuff (mostly for lvds madness). Or they can pick some or all of the parameters (e.g. just the p2 switchover on hdmi, or all the clock parameters for dp/sdvo tv). Once that's done then the generic crtc code can fill out any missing bits (using the find_best_pll code) and then try to assign which pll to use (if it's a platform with shared plls). In the end the modeset could should simply write the computed stuff into registers and never be able to fail. Of course there's still a lot of data to be moved into pipe_config to make this all happen, hence some of the temporary ugliness. > The only real concern I had was that the fixed clocks don't include the > derived m factor for example, but it looks like we shouldn't need that > except for the LVDS reduced clock thing. The idea behind leaving out m (and compute dotclock/vco) from the pipe_config stuff is that we don't store that into the hw. It's only really used in the pll computation. So once this has all settled I think we should rip this all out from the clock structure and compute it as-needed in the find_best_pll functions. I'm working on some patches already to move into that direction a bit. -Daniel
On Thu, Apr 25, 2013 at 02:04:45PM +0200, Daniel Vetter wrote: > On Thu, Apr 25, 2013 at 02:34:39PM +0300, Ville Syrjälä wrote: > > On Fri, Apr 19, 2013 at 11:14:33AM +0200, Daniel Vetter wrote: > > > With the exception of hsw, which has dedicated DP clocks which run at > > > the fixed frequency already, and vlv, which doesn't have optmized > > > pre-defined dp clock parameters (yet). > > > > So it looks like were still going through the full compute clocks thing, > > which will possibly produce something different, and then we overwrite it > > with the fixed clocks afterwards. I'm assuming that's just a transitional > > issue and will get fixed later. > > Yeah, I guess I should have spilled a few more words about where I > eventually want to end up with this. > > So ultimately my idea is that in the compute config stage first the crtc > code puts the default platform pll limits into the pipe_config. Then > encoders can either overwrite that limit structure with their own special > stuff (mostly for lvds madness). Or they can pick some or all of the > parameters (e.g. just the p2 switchover on hdmi, or all the clock > parameters for dp/sdvo tv). > > Once that's done then the generic crtc code can fill out any missing bits > (using the find_best_pll code) and then try to assign which pll to use (if > it's a platform with shared plls). In the end the modeset could should > simply write the computed stuff into registers and never be able to fail. > > Of course there's still a lot of data to be moved into pipe_config to make > this all happen, hence some of the temporary ugliness. > > > The only real concern I had was that the fixed clocks don't include the > > derived m factor for example, but it looks like we shouldn't need that > > except for the LVDS reduced clock thing. > > The idea behind leaving out m (and compute dotclock/vco) from the > pipe_config stuff is that we don't store that into the hw. It's only > really used in the pll computation. So once this has all settled I think > we should rip this all out from the clock structure and compute it > as-needed in the find_best_pll functions. I'm working on some patches > already to move into that direction a bit. Yeah I had the same idea about always computing the derived stuff on-demand always. Would remove the risk of accidentally using an unpopulated value. Of course it wasn't such a big issue before my intel_clock_to == struct dpll patch, since you didn't have the derived stuff in the struct dpll in the first place. Win some, lose some.
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5437a5e..d91bad8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -114,15 +114,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, intel_clock_t *best_clock); static bool -intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); -static bool -intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); - -static bool intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock); @@ -254,20 +245,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .find_pll = intel_g4x_find_best_PLL, }; -static const intel_limit_t intel_limits_g4x_display_port = { - .dot = { .min = 161670, .max = 227000 }, - .vco = { .min = 1750000, .max = 3500000}, - .n = { .min = 1, .max = 2 }, - .m = { .min = 97, .max = 108 }, - .m1 = { .min = 0x10, .max = 0x12 }, - .m2 = { .min = 0x05, .max = 0x06 }, - .p = { .min = 10, .max = 20 }, - .p1 = { .min = 1, .max = 2}, - .p2 = { .dot_limit = 0, - .p2_slow = 10, .p2_fast = 10 }, - .find_pll = intel_find_pll_g4x_dp, -}; - static const intel_limit_t intel_limits_pineview_sdvo = { .dot = { .min = 20000, .max = 400000}, .vco = { .min = 1700000, .max = 3500000 }, @@ -374,20 +351,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { .find_pll = intel_g4x_find_best_PLL, }; -static const intel_limit_t intel_limits_ironlake_display_port = { - .dot = { .min = 25000, .max = 350000 }, - .vco = { .min = 1760000, .max = 3510000}, - .n = { .min = 1, .max = 2 }, - .m = { .min = 81, .max = 90 }, - .m1 = { .min = 12, .max = 22 }, - .m2 = { .min = 5, .max = 9 }, - .p = { .min = 10, .max = 20 }, - .p1 = { .min = 1, .max = 2}, - .p2 = { .dot_limit = 0, - .p2_slow = 10, .p2_fast = 10 }, - .find_pll = intel_find_pll_ironlake_dp, -}; - static const intel_limit_t intel_limits_vlv_dac = { .dot = { .min = 25000, .max = 270000 }, .vco = { .min = 4000000, .max = 6000000 }, @@ -485,10 +448,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, else limit = &intel_limits_ironlake_single_lvds; } - } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) - limit = &intel_limits_ironlake_display_port; - else + } else limit = &intel_limits_ironlake_dac; return limit; @@ -509,8 +469,6 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits_g4x_sdvo; - } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { - limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ limit = &intel_limits_i9xx_sdvo; @@ -758,59 +716,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, } static bool -intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - intel_clock_t clock; - - if (target < 200000) { - clock.n = 1; - clock.p1 = 2; - clock.p2 = 10; - clock.m1 = 12; - clock.m2 = 9; - } else { - clock.n = 2; - clock.p1 = 1; - clock.p2 = 10; - clock.m1 = 14; - clock.m2 = 8; - } - intel_clock(dev, refclk, &clock); - memcpy(best_clock, &clock, sizeof(intel_clock_t)); - return true; -} - -/* DisplayPort has only two frequencies, 162MHz and 270MHz */ -static bool -intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) -{ - intel_clock_t clock; - if (target < 200000) { - clock.p1 = 2; - clock.p2 = 10; - clock.n = 2; - clock.m1 = 23; - clock.m2 = 8; - } else { - clock.p1 = 1; - clock.p2 = 10; - clock.n = 1; - clock.m1 = 14; - clock.m2 = 2; - } - clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); - clock.p = (clock.p1 * clock.p2); - clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; - clock.vco = 0; - memcpy(best_clock, &clock, sizeof(intel_clock_t)); - return true; -} -static bool intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b55f3ec..b1a3a64 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -660,6 +660,49 @@ intel_dp_i2c_init(struct intel_dp *intel_dp, return ret; } +static void +intel_dp_set_clock(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config, int link_bw) +{ + struct drm_device *dev = encoder->base.dev; + + if (IS_G4X(dev)) { + if (link_bw == DP_LINK_BW_1_62) { + pipe_config->dpll.p1 = 2; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.n = 2; + pipe_config->dpll.m1 = 23; + pipe_config->dpll.m2 = 8; + } else { + pipe_config->dpll.p1 = 1; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.n = 1; + pipe_config->dpll.m1 = 14; + pipe_config->dpll.m2 = 2; + } + pipe_config->clock_set = true; + } else if (IS_HASWELL(dev)) { + /* Haswell has special-purpose DP DDI clocks. */ + } else if (HAS_PCH_SPLIT(dev)) { + if (link_bw == DP_LINK_BW_1_62) { + pipe_config->dpll.n = 1; + pipe_config->dpll.p1 = 2; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.m1 = 12; + pipe_config->dpll.m2 = 9; + } else { + pipe_config->dpll.n = 2; + pipe_config->dpll.p1 = 1; + pipe_config->dpll.p2 = 10; + pipe_config->dpll.m1 = 14; + pipe_config->dpll.m2 = 8; + } + pipe_config->clock_set = true; + } else if (IS_VALLEYVIEW(dev)) { + /* FIXME: Need to figure out optimized DP clocks for vlv. */ + } +} + bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) @@ -765,6 +808,8 @@ found: } pipe_config->pipe_bpp = bpp; + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); + return true; }