new file mode 100644
@@ -0,0 +1,153 @@
+Samsung EXYNOS5 SoC Camera Subsystem (FIMC)
+----------------------------------------------
+
+The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC-LITE,
+MIPI CSIS and FIMC-IS.
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device, like common camera port pins or the CAMCLK clock outputs
+for external image sensors attached to an SoC.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible : must be "samsung,exynos5-fimc", "simple-bus"
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : must contain "sclk_cam0", "sclk_cam1" entries,
+ matching entries in the clocks property.
+
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default" and optional pinctrl states:
+"idle", "active-a", active-b". These optional states can be used to switch the
+camera port pinmux at runtime. The "idle" state should configure both the camera
+ports A and B into high impedance state, especially the CAMCLK clock output
+should be inactive. For the "active-a" state the camera port A must be activated
+and the port B deactivated and for the state "active-b" it should be the other
+way around.
+
+The 'camera' node must include at least one 'fimc-lite' child node.
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Optional properties
+
+- samsung,camclk-out : specifies clock output for remote sensor,
+ 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+The implementation of this bindings requires clock-frequency property to be
+present in the sensor device nodes.
+
+Example:
+
+ aliases {
+ fimc-lite0 = &fimc_lite_0
+ };
+
+ /* Parallel bus IF sensor */
+ i2c_0: i2c@13860000 {
+ s5k6aa: sensor@3c {
+ compatible = "samsung,s5k6aafx";
+ reg = <0x3c>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <...>;
+ clock-names = "mclk";
+
+ port {
+ s5k6aa_ep: endpoint {
+ remote-endpoint = <&fimc0_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+ };
+
+ /* MIPI CSI-2 bus IF sensor */
+ s5c73m3: sensor@0x1a {
+ compatible = "samsung,s5c73m3";
+ reg = <0x1a>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <...>;
+ clock-names = "mclk";
+
+ port {
+ s5c73m3_1: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csis0_ep>;
+ };
+ };
+ };
+
+ camera {
+ compatible = "samsung,exynos5-fimc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_port_a_clk_active>;
+
+ /* parallel camera ports */
+ parallel-ports {
+ /* camera A input */
+ port@0 {
+ reg = <0>;
+ fimc0_ep: endpoint {
+ remote-endpoint = <&s5k6aa_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ fimc_lite_0: fimc-lite@13C00000 {
+ compatible = "samsung,exynos5250-fimc-lite";
+ reg = <0x13C00000 0x1000>;
+ interrupts = <0 126 0>;
+ clocks = <&clock 129>;
+ clock-names = "flite";
+ status = "okay";
+ };
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x1000>;
+ interrupts = <0 78 0>;
+ /* camera C input */
+ port@3 {
+ reg = <3>;
+ csis0_ep: endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1 2 3 4>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };
+ };
+
+MIPI-CSIS device binding is defined in samsung-mipi-csis.txt and FIMC-LITE
+device binding is defined in exynos-fimc-lite.txt.
@@ -123,6 +123,7 @@ config VIDEO_S3C_CAMIF
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
+source "drivers/media/platform/exynos5-is/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
endif # V4L_PLATFORM_DRIVERS
@@ -37,6 +37,7 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/
obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/
+obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS5_MDEV) += exynos5-is/
obj-$(CONFIG_BLACKFIN) += blackfin/
new file mode 100644
@@ -0,0 +1,7 @@
+config VIDEO_SAMSUNG_EXYNOS5_MDEV
+ bool "Samsung Exynos5 Media Device driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5 && OF
+ help
+ This is a v4l2 based media controller driver for
+ Exynos5 SoC.
+
new file mode 100644
@@ -0,0 +1,4 @@
+ccflags-y += -Idrivers/media/platform/exynos4-is
+exynos-mdevice-objs := exynos5-mdev.o
+
+obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS5_MDEV) += exynos-mdevice.o
new file mode 100644
@@ -0,0 +1,1131 @@
+/*
+ * EXYNOS5 SoC series camera host interface media device driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Shaik Ameer Basha <shaik.ameer@samsung.com>
+ *
+ * This driver is based on exynos4-is media device driver developed by
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation, either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
+#include <media/media-device.h>
+
+#include "exynos5-mdev.h"
+
+#define dbg(fmt, args...) \
+ pr_debug("%s:%d: " fmt "\n", __func__, __LINE__, ##args)
+
+static int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on);
+static int __fimc_md_set_camclk(struct fimc_md *fmd,
+ struct fimc_source_info *si,
+ bool on);
+/**
+ * fimc_pipeline_prepare - update pipeline information with subdevice pointers
+ * @me: media entity terminating the pipeline
+ *
+ * Caller holds the graph mutex.
+ */
+static void fimc_pipeline_prepare(struct exynos5_pipeline0 *p,
+ struct media_entity *me)
+{
+ struct v4l2_subdev *sd;
+ int i;
+
+ for (i = 0; i < IDX_MAX; i++)
+ p->subdevs[i] = NULL;
+
+ while (1) {
+ struct media_pad *pad = NULL;
+
+ /* Find remote source pad */
+ for (i = 0; i < me->num_pads; i++) {
+ struct media_pad *spad = &me->pads[i];
+ if (!(spad->flags & MEDIA_PAD_FL_SINK))
+ continue;
+ pad = media_entity_remote_source(spad);
+ if (pad)
+ break;
+ }
+
+ if (pad == NULL ||
+ media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+ break;
+ sd = media_entity_to_v4l2_subdev(pad->entity);
+
+ switch (sd->grp_id) {
+ case GRP_ID_FIMC_IS_SENSOR:
+ case GRP_ID_SENSOR:
+ p->subdevs[IDX_SENSOR] = sd;
+ break;
+ case GRP_ID_CSIS:
+ p->subdevs[IDX_CSIS] = sd;
+ break;
+ case GRP_ID_FLITE:
+ p->subdevs[IDX_FLITE] = sd;
+ break;
+ default:
+ pr_warn("%s: Unknown subdev grp_id: %#x\n",
+ __func__, sd->grp_id);
+ }
+ me = &sd->entity;
+ if (me->num_pads == 1)
+ break;
+ }
+}
+
+/**
+ * __subdev_set_power - change power state of a single subdev
+ * @sd: subdevice to change power state for
+ * @on: 1 to enable power or 0 to disable
+ *
+ * Return result of s_power subdev operation or -ENXIO if sd argument
+ * is NULL. Return 0 if the subdevice does not implement s_power.
+ */
+static int __subdev_set_power(struct v4l2_subdev *sd, int on)
+{
+ int *use_count;
+ int ret;
+
+ if (sd == NULL)
+ return -ENXIO;
+
+ use_count = &sd->entity.use_count;
+ if (on && (*use_count)++ > 0)
+ return 0;
+ else if (!on && (*use_count == 0 || --(*use_count) > 0))
+ return 0;
+ ret = v4l2_subdev_call(sd, core, s_power, on);
+
+ return ret != -ENOIOCTLCMD ? ret : 0;
+}
+
+/**
+ * fimc_pipeline_s_power - change power state of all pipeline subdevs
+ * @fimc: fimc device terminating the pipeline
+ * @state: true to power on, false to power off
+ *
+ * Needs to be called with the graph mutex held.
+ */
+static int fimc_pipeline_s_power(struct exynos5_pipeline0 *p, bool state)
+{
+ unsigned int i;
+ int ret;
+
+ if (p->subdevs[IDX_SENSOR] == NULL)
+ return -ENXIO;
+
+ for (i = 0; i < IDX_MAX; i++) {
+ unsigned int idx = state ? (IDX_MAX - 1) - i : i;
+
+ ret = __subdev_set_power(p->subdevs[idx], state);
+ if (ret < 0 && ret != -ENXIO)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * __fimc_pipeline_init - allocate the fimc_pipeline structure and do the
+ * basic initialization.
+ * @p: Pointer to fimc_pipeline structure
+ *
+ * Initializes the 'is_init' variable to indicate the pipeline structure
+ * is valid.
+ */
+static int __fimc_pipeline_init(struct fimc_pipeline *p)
+{
+ struct exynos5_pipeline0 *ep;
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ ep->is_init = true;
+ p->priv = (void *)ep;
+ return 0;
+}
+
+/**
+ * __fimc_pipeline_free - free the allocated resources for fimc_pipeline
+ * @p: Pointer to fimc_pipeline structure
+ *
+ * sets the 'is_init' variable to false, to indicate the pipeline structure
+ * is not valid.
+ *
+ * RETURNS:
+ * Zero in case of success and -EINVAL in case of failure.
+ */
+static int __fimc_pipeline_free(struct fimc_pipeline *p)
+{
+ struct exynos5_pipeline0 *ep0 = (struct exynos5_pipeline0 *)p->priv;
+
+ if (!ep0 || !ep0->is_init)
+ return -EINVAL;
+
+ ep0->is_init = false;
+ kfree(ep0);
+
+ return 0;
+}
+
+/**
+ * __fimc_pipeline_open - update the pipeline information, enable power
+ * of all pipeline subdevs and the sensor clock
+ * @me: media entity to start graph walk with
+ * @prepare: true to walk the current pipeline and acquire all subdevs
+ *
+ * Called with the graph mutex held.
+ */
+static int __fimc_pipeline_open(struct fimc_pipeline *p,
+ struct media_entity *me, bool prepare)
+{
+ struct exynos5_pipeline0 *ep = (struct exynos5_pipeline0 *)p->priv;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (WARN_ON(p == NULL || me == NULL))
+ return -EINVAL;
+
+ if (!ep || !ep->is_init)
+ return -EINVAL;
+
+ if (prepare)
+ fimc_pipeline_prepare(ep, me);
+
+ sd = ep->subdevs[IDX_SENSOR];
+ if (sd == NULL)
+ return -EINVAL;
+
+ ret = fimc_md_set_camclk(sd, true);
+ if (ret < 0)
+ return ret;
+
+ ret = fimc_pipeline_s_power(ep, 1);
+ if (!ret)
+ return 0;
+
+ fimc_md_set_camclk(sd, false);
+ return ret;
+}
+
+/**
+ * __fimc_pipeline_close - disable the sensor clock and pipeline power
+ * @fimc: fimc device terminating the pipeline
+ *
+ * Disable power of all subdevs and turn the external sensor clock off.
+ */
+static int __fimc_pipeline_close(struct fimc_pipeline *p)
+{
+ struct exynos5_pipeline0 *ep = (struct exynos5_pipeline0 *)p->priv;
+ struct v4l2_subdev *sd = ep ? ep->subdevs[IDX_SENSOR] : NULL;
+ int ret = 0;
+
+ if (WARN_ON(sd == NULL))
+ return -EINVAL;
+
+ if (ep->subdevs[IDX_SENSOR]) {
+ ret = fimc_pipeline_s_power(ep, 0);
+ fimc_md_set_camclk(sd, false);
+ }
+ return ret == -ENXIO ? 0 : ret;
+}
+
+/**
+ * __fimc_pipeline_s_stream - call s_stream() on pipeline subdevs
+ * @pipeline: video pipeline structure
+ * @on: passed as the s_stream() callback argument
+ */
+static int __fimc_pipeline_s_stream(struct fimc_pipeline *p, bool on)
+{
+ struct exynos5_pipeline0 *ep = (struct exynos5_pipeline0 *)p->priv;
+ int i, ret;
+
+ if (ep->subdevs[IDX_SENSOR] == NULL)
+ return -ENODEV;
+
+ for (i = 0; i < IDX_MAX; i++) {
+ unsigned int idx = on ? (IDX_MAX - 1) - i : i;
+
+ ret = v4l2_subdev_call(ep->subdevs[idx], video, s_stream, on);
+
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+ }
+
+ return 0;
+
+}
+
+/**
+ * __fimc_pipeline_get_subdev_sensor - if valid pipeline, returns the sensor
+ * subdev pointer else returns NULL
+ * @p: Pointer to fimc_pipeline structure
+ * @sd_idx: Index of the subdev associated with the current pipeline
+ *
+ * RETURNS:
+ * If success, returns valid subdev pointer or NULL in case of sudbev not found
+ */
+static struct v4l2_subdev *__fimc_pipeline_get_subdev(struct fimc_pipeline *p,
+ enum exynos_subdev_index sd_idx)
+{
+ struct exynos5_pipeline0 *ep = (struct exynos5_pipeline0 *)p->priv;
+ struct v4l2_subdev *sd;
+
+ if (!ep || !ep->is_init)
+ return NULL;
+
+ switch (sd_idx) {
+ case EXYNOS_SD_SENSOR:
+ sd = ep->subdevs[IDX_SENSOR];
+ break;
+ case EXYNOS_SD_CSIS:
+ sd = ep->subdevs[IDX_CSIS];
+ break;
+ case EXYNOS_SD_FLITE:
+ sd = ep->subdevs[IDX_FLITE];
+ break;
+ default:
+ sd = NULL;
+ break;
+ }
+ return sd;
+}
+
+static void __fimc_pipeline_register_notify_callback(
+ struct fimc_pipeline *p,
+ void (*notify_cb)(struct v4l2_subdev *sd,
+ unsigned int notification, void *arg))
+{
+ struct exynos5_pipeline0 *ep = (struct exynos5_pipeline0 *)p->priv;
+
+ if (!notify_cb)
+ return;
+
+ ep->sensor_notify = notify_cb;
+}
+
+/* Media pipeline operations for the FIMC/FIMC-LITE video device driver */
+static const struct fimc_pipeline_ops exynos5_pipeline0_ops = {
+ .init = __fimc_pipeline_init,
+ .free = __fimc_pipeline_free,
+ .open = __fimc_pipeline_open,
+ .close = __fimc_pipeline_close,
+ .set_stream = __fimc_pipeline_s_stream,
+ .get_subdev = __fimc_pipeline_get_subdev,
+ .register_notify_cb = __fimc_pipeline_register_notify_callback,
+};
+
+/* Register I2C client subdev associated with @node. */
+static int fimc_md_of_add_sensor(struct fimc_md *fmd,
+ struct device_node *node, int index)
+{
+ struct fimc_sensor_info *si;
+ struct i2c_client *client;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
+ return -EINVAL;
+ si = &fmd->sensor[index];
+
+ client = of_find_i2c_device_by_node(node);
+ if (!client)
+ return -EPROBE_DEFER;
+
+ device_lock(&client->dev);
+
+ if (!client->driver ||
+ !try_module_get(client->driver->driver.owner)) {
+ ret = -EPROBE_DEFER;
+ v4l2_info(&fmd->v4l2_dev, "No driver found for %s\n",
+ node->full_name);
+ goto dev_put;
+ }
+
+ /* Enable sensor's master clock */
+ ret = __fimc_md_set_camclk(fmd, &si->pdata, true);
+ if (ret < 0)
+ goto mod_put;
+ sd = i2c_get_clientdata(client);
+
+ ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+ __fimc_md_set_camclk(fmd, &si->pdata, false);
+ if (ret < 0)
+ goto mod_put;
+
+ v4l2_set_subdev_hostdata(sd, &si->pdata);
+ sd->grp_id = GRP_ID_SENSOR;
+ si->subdev = sd;
+ v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
+ sd->name, fmd->num_sensors);
+ fmd->num_sensors++;
+
+mod_put:
+ module_put(client->driver->driver.owner);
+dev_put:
+ device_unlock(&client->dev);
+ put_device(&client->dev);
+ return ret;
+}
+
+/* Parse port node and register as a sub-device any sensor specified there. */
+static int fimc_md_parse_port_node(struct fimc_md *fmd,
+ struct device_node *port,
+ unsigned int index)
+{
+ struct device_node *rem, *ep;
+ struct fimc_source_info *pd;
+ struct v4l2_of_endpoint endpoint;
+ int ret;
+ u32 val;
+
+ pd = &fmd->sensor[index].pdata;
+
+ /* Assume here a port node can have only one endpoint node. */
+ ep = of_get_next_child(port, NULL);
+ if (!ep)
+ return 0;
+
+ v4l2_of_parse_endpoint(ep, &endpoint);
+ if (WARN_ON(endpoint.port == 0) || index >= FIMC_MAX_SENSORS)
+ return -EINVAL;
+
+ pd->mux_id = (endpoint.port - 1) & 0x1;
+
+ rem = v4l2_of_get_remote_port_parent(ep);
+ of_node_put(ep);
+ if (rem == NULL) {
+ v4l2_info(&fmd->v4l2_dev, "Remote device at %s not found\n",
+ ep->full_name);
+ return 0;
+ }
+ if (!of_property_read_u32(rem, "samsung,camclk-out", &val))
+ pd->clk_id = val;
+
+ if (!of_property_read_u32(rem, "clock-frequency", &val))
+ pd->clk_frequency = val;
+
+ if (pd->clk_frequency == 0) {
+ v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n",
+ rem->full_name);
+ of_node_put(rem);
+ return -EINVAL;
+ }
+
+ if (fimc_input_is_parallel(endpoint.port)) {
+ if (endpoint.bus_type == V4L2_MBUS_PARALLEL)
+ pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_601;
+ else
+ pd->sensor_bus_type = FIMC_BUS_TYPE_ITU_656;
+ pd->flags = endpoint.bus.parallel.flags;
+ } else if (fimc_input_is_mipi_csi(endpoint.port)) {
+ /*
+ * MIPI CSI-2: only input mux selection and
+ * the sensor's clock frequency is needed.
+ */
+ pd->sensor_bus_type = FIMC_BUS_TYPE_MIPI_CSI2;
+ } else {
+ v4l2_err(&fmd->v4l2_dev, "Wrong port id (%u) at node %s\n",
+ endpoint.port, rem->full_name);
+ }
+
+ ret = fimc_md_of_add_sensor(fmd, rem, index);
+ of_node_put(rem);
+
+ return ret;
+}
+
+/* Register all SoC external sub-devices */
+static int fimc_md_of_sensors_register(struct fimc_md *fmd,
+ struct device_node *np)
+{
+ struct device_node *parent = fmd->pdev->dev.of_node;
+ struct device_node *node, *ports;
+ int index = 0;
+ int ret;
+
+ /* Attach sensors linked to MIPI CSI-2 receivers */
+ for_each_available_child_of_node(parent, node) {
+ struct device_node *port;
+
+ if (of_node_cmp(node->name, "csis"))
+ continue;
+ /* The csis node can have only port subnode. */
+ port = of_get_next_child(node, NULL);
+ if (!port)
+ continue;
+
+ ret = fimc_md_parse_port_node(fmd, port, index);
+ if (ret < 0)
+ return ret;
+ index++;
+ }
+
+ /* Attach sensors listed in the parallel-ports node */
+ ports = of_get_child_by_name(parent, "parallel-ports");
+ if (!ports)
+ return 0;
+
+ for_each_child_of_node(ports, node) {
+ ret = fimc_md_parse_port_node(fmd, node, index);
+ if (ret < 0)
+ break;
+ index++;
+ }
+
+ return 0;
+}
+
+static int __of_get_csis_id(struct device_node *np)
+{
+ u32 reg = 0;
+
+ np = of_get_child_by_name(np, "port");
+ if (!np)
+ return -EINVAL;
+ of_property_read_u32(np, "reg", ®);
+ return reg - FIMC_INPUT_MIPI_CSI2_0;
+}
+
+/*
+ * MIPI-CSIS, FIMC and FIMC-LITE platform devices registration.
+ */
+
+static int register_fimc_lite_entity(struct fimc_md *fmd,
+ struct fimc_lite *fimc_lite)
+{
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (WARN_ON(fimc_lite->index >= FIMC_LITE_MAX_DEVS ||
+ fmd->fimc_lite[fimc_lite->index]))
+ return -EBUSY;
+
+ sd = &fimc_lite->subdev;
+ sd->grp_id = GRP_ID_FLITE;
+ v4l2_set_subdev_hostdata(sd, (void *)&exynos5_pipeline0_ops);
+
+ ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+ if (!ret)
+ fmd->fimc_lite[fimc_lite->index] = fimc_lite;
+ else
+ v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.LITE%d\n",
+ fimc_lite->index);
+ return ret;
+}
+
+static int register_csis_entity(struct fimc_md *fmd,
+ struct platform_device *pdev,
+ struct v4l2_subdev *sd)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int id, ret;
+
+ id = node ? __of_get_csis_id(node) : max(0, pdev->id);
+
+ if (WARN_ON(id < 0 || id >= CSIS_MAX_ENTITIES))
+ return -ENOENT;
+
+ if (WARN_ON(fmd->csis[id].sd))
+ return -EBUSY;
+
+ sd->grp_id = GRP_ID_CSIS;
+ ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
+ if (!ret)
+ fmd->csis[id].sd = sd;
+ else
+ v4l2_err(&fmd->v4l2_dev,
+ "Failed to register MIPI-CSIS.%d (%d)\n", id, ret);
+ return ret;
+}
+
+static int fimc_md_register_platform_entity(struct fimc_md *fmd,
+ struct platform_device *pdev,
+ int plat_entity)
+{
+ struct device *dev = &pdev->dev;
+ int ret = -EPROBE_DEFER;
+ void *drvdata;
+
+ /* Lock to ensure dev->driver won't change. */
+ device_lock(dev);
+
+ if (!dev->driver || !try_module_get(dev->driver->owner))
+ goto dev_unlock;
+
+ drvdata = dev_get_drvdata(dev);
+ /* Some subdev didn't probe succesfully id drvdata is NULL */
+ if (drvdata) {
+ switch (plat_entity) {
+ case IDX_FLITE:
+ ret = register_fimc_lite_entity(fmd, drvdata);
+ break;
+ case IDX_CSIS:
+ ret = register_csis_entity(fmd, pdev, drvdata);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+ }
+
+ module_put(dev->driver->owner);
+dev_unlock:
+ device_unlock(dev);
+ if (ret == -EPROBE_DEFER)
+ dev_info(&fmd->pdev->dev, "deferring %s device registration\n",
+ dev_name(dev));
+ else if (ret < 0)
+ dev_err(&fmd->pdev->dev, "%s device registration failed (%d)\n",
+ dev_name(dev), ret);
+ return ret;
+}
+
+/* Register FIMC, FIMC-LITE and CSIS media entities */
+static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
+ struct device_node *parent)
+{
+ struct device_node *node;
+ int ret = 0;
+
+ for_each_available_child_of_node(parent, node) {
+ struct platform_device *pdev;
+ int plat_entity = -1;
+
+ pdev = of_find_device_by_node(node);
+ if (!pdev)
+ continue;
+
+ /* If driver of any entity isn't ready try all again later. */
+ if (!strcmp(node->name, CSIS_OF_NODE_NAME))
+ plat_entity = IDX_CSIS;
+ else if (!strcmp(node->name, FIMC_LITE_OF_NODE_NAME))
+ plat_entity = IDX_FLITE;
+
+ if (plat_entity >= 0)
+ ret = fimc_md_register_platform_entity(fmd, pdev,
+ plat_entity);
+ put_device(&pdev->dev);
+ if (ret < 0)
+ break;
+ }
+
+ return ret;
+}
+
+static void fimc_md_unregister_entities(struct fimc_md *fmd)
+{
+ int i;
+
+ for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) {
+ if (fmd->fimc_lite[i] == NULL)
+ continue;
+ v4l2_device_unregister_subdev(&fmd->fimc_lite[i]->subdev);
+ fmd->fimc_lite[i]->pipeline_ops = NULL;
+ fmd->fimc_lite[i] = NULL;
+ }
+ for (i = 0; i < CSIS_MAX_ENTITIES; i++) {
+ if (fmd->csis[i].sd == NULL)
+ continue;
+ v4l2_device_unregister_subdev(fmd->csis[i].sd);
+ module_put(fmd->csis[i].sd->owner);
+ fmd->csis[i].sd = NULL;
+ }
+ for (i = 0; i < fmd->num_sensors; i++) {
+ if (fmd->sensor[i].subdev == NULL)
+ continue;
+ v4l2_device_unregister_subdev(fmd->sensor[i].subdev);
+ fmd->sensor[i].subdev = NULL;
+ }
+ v4l2_info(&fmd->v4l2_dev, "Unregistered all entities\n");
+}
+
+/**
+ * __fimc_md_create_fimc_links - create links to all FIMC entities
+ * @fmd: fimc media device
+ * @source: the source entity to create links to all fimc entities from
+ * @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
+ * @pad: the source entity pad index
+ * @link_mask: bitmask of the fimc devices for which link should be enabled
+ */
+static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
+ struct media_entity *source,
+ struct v4l2_subdev *sensor,
+ int pad, int link_mask)
+{
+ struct media_entity *sink;
+ unsigned int flags = 0;
+ int i, ret = 0;
+
+ for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) {
+ if (!fmd->fimc_lite[i])
+ continue;
+
+ flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0;
+ sink = &fmd->fimc_lite[i]->subdev.entity;
+ ret = media_entity_create_link(source, pad, sink,
+ FLITE_SD_PAD_SINK, flags);
+ if (ret)
+ return ret;
+
+ /* Notify FIMC-LITE subdev entity */
+ ret = media_entity_call(sink, link_setup, &sink->pads[0],
+ &source->pads[pad], flags);
+ if (ret)
+ break;
+
+ v4l2_info(&fmd->v4l2_dev, "created link [%s] %c> [%s]\n",
+ source->name, flags ? '=' : '-', sink->name);
+ }
+ return 0;
+}
+
+/**
+ * fimc_md_create_links - create default links between registered entities
+ *
+ * Parallel interface sensor entities are connected directly to FIMC capture
+ * entities. The sensors using MIPI CSIS bus are connected through immutable
+ * link with CSI receiver entity specified by mux_id. Any registered CSIS
+ * entity has a link to each registered FIMC capture entity. Enabled links
+ * are created by default between each subsequent registered sensor and
+ * subsequent FIMC capture entity. The number of default active links is
+ * determined by the number of available sensors or FIMC entities,
+ * whichever is less.
+ */
+static int fimc_md_create_links(struct fimc_md *fmd)
+{
+ struct v4l2_subdev *csi_sensors[CSIS_MAX_ENTITIES] = { NULL };
+ struct v4l2_subdev *sensor, *csis;
+ struct fimc_source_info *pdata;
+ struct media_entity *source, *sink;
+ int i, pad, fimc_id = 0, ret = 0;
+ u32 flags, link_mask = 0;
+
+ for (i = 0; i < fmd->num_sensors; i++) {
+ if (fmd->sensor[i].subdev == NULL)
+ continue;
+
+ sensor = fmd->sensor[i].subdev;
+ pdata = v4l2_get_subdev_hostdata(sensor);
+ if (!pdata)
+ continue;
+
+ source = NULL;
+
+ switch (pdata->sensor_bus_type) {
+ case FIMC_BUS_TYPE_MIPI_CSI2:
+ if (WARN(pdata->mux_id >= CSIS_MAX_ENTITIES,
+ "Wrong CSI channel id: %d\n", pdata->mux_id))
+ return -EINVAL;
+
+ csis = fmd->csis[pdata->mux_id].sd;
+ if (WARN(csis == NULL,
+ "MIPI-CSI interface specified "
+ "but s5p-csis module is not loaded!\n"))
+ return -EINVAL;
+
+ pad = sensor->entity.num_pads - 1;
+ ret = media_entity_create_link(&sensor->entity, pad,
+ &csis->entity, CSIS_PAD_SINK,
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+
+ v4l2_info(&fmd->v4l2_dev, "created link [%s] => [%s]\n",
+ sensor->entity.name, csis->entity.name);
+
+ source = NULL;
+ csi_sensors[pdata->mux_id] = sensor;
+ break;
+
+ case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656:
+ source = &sensor->entity;
+ pad = 0;
+ break;
+
+ default:
+ v4l2_err(&fmd->v4l2_dev, "Wrong bus_type: %x\n",
+ pdata->sensor_bus_type);
+ return -EINVAL;
+ }
+ if (source == NULL)
+ continue;
+
+ link_mask = 1 << fimc_id++;
+ ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
+ pad, link_mask);
+ }
+
+ for (i = 0; i < CSIS_MAX_ENTITIES; i++) {
+ if (fmd->csis[i].sd == NULL)
+ continue;
+
+ source = &fmd->csis[i].sd->entity;
+ pad = CSIS_PAD_SOURCE;
+ sensor = csi_sensors[i];
+
+ link_mask = 1 << fimc_id++;
+ ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
+ pad, link_mask);
+ }
+
+ /* Create immutable links b/w each FIMC-LITE's subdev and video node */
+ flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED;
+ for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) {
+ if (!fmd->fimc_lite[i])
+ continue;
+ source = &fmd->fimc_lite[i]->subdev.entity;
+ sink = &fmd->fimc_lite[i]->vfd.entity;
+ ret = media_entity_create_link(source, FLITE_SD_PAD_SOURCE_DMA,
+ sink, 0, flags);
+ if (ret)
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * The peripheral sensor clock management.
+ */
+static void fimc_md_put_clocks(struct fimc_md *fmd)
+{
+ int i = FIMC_MAX_CAMCLKS;
+
+ while (--i >= 0) {
+ if (IS_ERR(fmd->camclk[i].clock))
+ continue;
+ clk_unprepare(fmd->camclk[i].clock);
+ clk_put(fmd->camclk[i].clock);
+ fmd->camclk[i].clock = ERR_PTR(-EINVAL);
+ }
+}
+
+static int fimc_md_get_clocks(struct fimc_md *fmd)
+{
+ struct device *dev = NULL;
+ char clk_name[32];
+ struct clk *clock;
+ int ret, i;
+
+ for (i = 0; i < FIMC_MAX_CAMCLKS; i++)
+ fmd->camclk[i].clock = ERR_PTR(-EINVAL);
+
+ if (fmd->pdev->dev.of_node)
+ dev = &fmd->pdev->dev;
+
+ for (i = 0; i < FIMC_MAX_CAMCLKS; i++) {
+ snprintf(clk_name, sizeof(clk_name), "sclk_cam%u", i);
+ clock = clk_get(dev, clk_name);
+
+ if (IS_ERR(clock)) {
+ dev_err(&fmd->pdev->dev, "Failed to get clock: %s\n",
+ clk_name);
+ ret = PTR_ERR(clock);
+ break;
+ }
+ ret = clk_prepare(clock);
+ if (ret < 0) {
+ clk_put(clock);
+ fmd->camclk[i].clock = ERR_PTR(-EINVAL);
+ break;
+ }
+ fmd->camclk[i].clock = clock;
+ }
+ if (ret)
+ fimc_md_put_clocks(fmd);
+
+ return ret;
+}
+
+static int __fimc_md_set_camclk(struct fimc_md *fmd,
+ struct fimc_source_info *si,
+ bool on)
+{
+ struct fimc_camclk_info *camclk;
+ int ret = 0;
+
+ if (WARN_ON(si->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL)
+ return -EINVAL;
+
+ camclk = &fmd->camclk[si->clk_id];
+
+ dbg("camclk %d, f: %lu, use_count: %d, on: %d",
+ si->clk_id, si->clk_frequency, camclk->use_count, on);
+
+ if (on) {
+ if (camclk->use_count > 0 &&
+ camclk->frequency != si->clk_frequency)
+ return -EINVAL;
+
+ if (camclk->use_count++ == 0) {
+ clk_set_rate(camclk->clock, si->clk_frequency);
+ camclk->frequency = si->clk_frequency;
+ ret = clk_enable(camclk->clock);
+ dbg("Enabled camclk %d: f: %lu", si->clk_id,
+ clk_get_rate(camclk->clock));
+ }
+ return ret;
+ }
+
+ if (WARN_ON(camclk->use_count == 0))
+ return 0;
+
+ if (--camclk->use_count == 0) {
+ clk_disable(camclk->clock);
+ dbg("Disabled camclk %d", si->clk_id);
+ }
+ return ret;
+}
+
+/**
+ * fimc_md_set_camclk - peripheral sensor clock setup
+ * @sd: sensor subdev to configure sclk_cam clock for
+ * @on: 1 to enable or 0 to disable the clock
+ *
+ * There are 2 separate clock outputs available in the SoC for external
+ * image processors. These clocks are shared between all registered FIMC
+ * devices to which sensors can be attached, either directly or through
+ * the MIPI CSI receiver. The clock is allowed here to be used by
+ * multiple sensors concurrently if they use same frequency.
+ * This function should only be called when the graph mutex is held.
+ */
+static int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
+{
+ struct fimc_source_info *si = v4l2_get_subdev_hostdata(sd);
+ struct fimc_md *fmd = entity_to_fimc_mdev(&sd->entity);
+
+ return __fimc_md_set_camclk(fmd, si, on);
+}
+
+static int fimc_md_link_notify(struct media_pad *source,
+ struct media_pad *sink, u32 flags)
+{
+ struct fimc_lite *fimc_lite = NULL;
+ struct fimc_pipeline *pipeline;
+ struct exynos5_pipeline0 *ep;
+ struct v4l2_subdev *sd;
+ struct mutex *lock;
+ int ret = 0, i;
+ int ref_count;
+
+ if (media_entity_type(sink->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+ return 0;
+
+ sd = media_entity_to_v4l2_subdev(sink->entity);
+
+ switch (sd->grp_id) {
+ case GRP_ID_FLITE:
+ fimc_lite = v4l2_get_subdevdata(sd);
+ if (WARN_ON(fimc_lite == NULL))
+ return 0;
+ pipeline = &fimc_lite->pipeline;
+ lock = &fimc_lite->lock;
+ break;
+ default:
+ return 0;
+ }
+
+ mutex_lock(lock);
+ ref_count = fimc_lite->ref_count;
+
+ ep = (struct exynos5_pipeline0 *)pipeline->priv;
+ if (!ep || !ep->is_init)
+ return -EINVAL;
+
+ if (!(flags & MEDIA_LNK_FL_ENABLED)) {
+ if (ref_count > 0)
+ ret = __fimc_pipeline_close(pipeline);
+ for (i = 0; i < IDX_MAX; i++)
+ ep->subdevs[i] = NULL;
+ } else if (ref_count > 0) {
+ /*
+ * Link activation. Enable power of pipeline elements only if
+ * the pipeline is already in use, i.e. its video node is open.
+ */
+ ret = __fimc_pipeline_open(pipeline,
+ source->entity, true);
+ }
+
+ mutex_unlock(lock);
+ return ret ? -EPIPE : ret;
+}
+
+/**
+ * fimc_md_sensor_notify - v4l2_device notification from a sensor subdev
+ * @sd: pointer to a subdev generating the notification
+ * @notification: the notification type, must be S5P_FIMC_TX_END_NOTIFY
+ * @arg: pointer to an u32 type integer that stores the frame payload value
+ *
+ * Passes the sensor notification to the capture device
+ */
+static void fimc_md_sensor_notify(struct v4l2_subdev *sd,
+ unsigned int notification, void *arg)
+{
+ struct fimc_md *fmd;
+ struct exynos5_pipeline0 *ep;
+ struct fimc_pipeline *p;
+ unsigned long flags;
+
+ fmd = entity_to_fimc_mdev(&sd->entity);
+
+ if (sd == NULL)
+ return;
+
+ p = media_pipe_to_fimc_pipeline(sd->entity.pipe);
+ ep = (struct exynos5_pipeline0 *)p->priv;
+
+ spin_lock_irqsave(&fmd->slock, flags);
+
+ if (ep->sensor_notify)
+ ep->sensor_notify(sd, notification, arg);
+
+ spin_unlock_irqrestore(&fmd->slock, flags);
+}
+
+static int fimc_md_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct v4l2_device *v4l2_dev;
+ struct fimc_md *fmd;
+ int ret;
+
+ fmd = devm_kzalloc(dev, sizeof(*fmd), GFP_KERNEL);
+ if (!fmd)
+ return -ENOMEM;
+
+ spin_lock_init(&fmd->slock);
+ fmd->pdev = pdev;
+
+ strlcpy(fmd->media_dev.model, "SAMSUNG EXYNOS5 IS",
+ sizeof(fmd->media_dev.model));
+ fmd->media_dev.link_notify = fimc_md_link_notify;
+ fmd->media_dev.dev = dev;
+
+ v4l2_dev = &fmd->v4l2_dev;
+ v4l2_dev->mdev = &fmd->media_dev;
+ v4l2_dev->notify = fimc_md_sensor_notify;
+ strlcpy(v4l2_dev->name, "exynos5-fimc-md", sizeof(v4l2_dev->name));
+
+ ret = v4l2_device_register(dev, &fmd->v4l2_dev);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
+ return ret;
+ }
+ ret = media_device_register(&fmd->media_dev);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "Failed to register media dev: %d\n", ret);
+ goto err_md;
+ }
+ ret = fimc_md_get_clocks(fmd);
+ if (ret)
+ goto err_clk;
+
+ /* Protect the media graph while we're registering entities */
+ mutex_lock(&fmd->media_dev.graph_mutex);
+
+ ret = fimc_md_register_of_platform_entities(fmd, dev->of_node);
+ if (ret)
+ goto err_unlock;
+
+ fmd->num_sensors = 0;
+ ret = fimc_md_of_sensors_register(fmd, dev->of_node);
+ if (ret)
+ goto err_unlock;
+
+ ret = fimc_md_create_links(fmd);
+ if (ret)
+ goto err_unlock;
+ ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+ if (ret)
+ goto err_unlock;
+
+ platform_set_drvdata(pdev, fmd);
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ return 0;
+
+err_unlock:
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+err_clk:
+ media_device_unregister(&fmd->media_dev);
+ fimc_md_put_clocks(fmd);
+ fimc_md_unregister_entities(fmd);
+err_md:
+ v4l2_device_unregister(&fmd->v4l2_dev);
+ return ret;
+}
+
+static int fimc_md_remove(struct platform_device *pdev)
+{
+ struct fimc_md *fmd = platform_get_drvdata(pdev);
+
+ if (!fmd)
+ return 0;
+ fimc_md_unregister_entities(fmd);
+ media_device_unregister(&fmd->media_dev);
+ fimc_md_put_clocks(fmd);
+ return 0;
+}
+
+static struct platform_device_id fimc_driver_ids[] __always_unused = {
+ { .name = "exynos5-fimc-md" },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, fimc_driver_ids);
+
+static const struct of_device_id fimc_md_of_match[] = {
+ { .compatible = "samsung,exynos5-fimc" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, fimc_md_of_match);
+
+static struct platform_driver fimc_md_driver = {
+ .probe = fimc_md_probe,
+ .remove = fimc_md_remove,
+ .driver = {
+ .of_match_table = fimc_md_of_match,
+ .name = "exynos5-fimc-md",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init fimc_md_init(void)
+{
+ request_module("s5p-csis");
+ return platform_driver_register(&fimc_md_driver);
+}
+
+static void __exit fimc_md_exit(void)
+{
+ platform_driver_unregister(&fimc_md_driver);
+}
+
+module_init(fimc_md_init);
+module_exit(fimc_md_exit);
+
+MODULE_AUTHOR("Shaik Ameer Basha <shaik.ameer@samsung.com>");
+MODULE_DESCRIPTION("EXYNOS5 FIMC media device driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef EXYNOS5_MDEVICE_H_
+#define EXYNOS5_MDEVICE_H_
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "fimc-lite.h"
+#include "mipi-csis.h"
+
+#define FIMC_OF_NODE_NAME "fimc"
+#define FIMC_LITE_OF_NODE_NAME "fimc-lite"
+#define CSIS_OF_NODE_NAME "csis"
+#define FIMC_IS_OF_NODE_NAME "fimc-is"
+
+/* Group IDs of sensor, MIPI-CSIS, FIMC-LITE and the writeback subdevs. */
+#define GRP_ID_SENSOR (1 << 8)
+#define GRP_ID_FIMC_IS_SENSOR (1 << 9)
+#define GRP_ID_WRITEBACK (1 << 10)
+#define GRP_ID_CSIS (1 << 11)
+#define GRP_ID_FLITE (1 << 13)
+#define GRP_ID_FIMC_IS (1 << 14)
+
+#define FIMC_MAX_SENSORS 8
+#define FIMC_MAX_CAMCLKS 2
+
+enum fimc_subdev_index {
+ IDX_SENSOR,
+ IDX_CSIS,
+ IDX_FLITE,
+ IDX_FIMC,
+ IDX_MAX,
+};
+
+struct fimc_csis_info {
+ struct v4l2_subdev *sd;
+ int id;
+};
+
+struct fimc_camclk_info {
+ struct clk *clock;
+ int use_count;
+ unsigned long frequency;
+};
+
+/**
+ * struct fimc_sensor_info - image data source subdev information
+ * @pdata: sensor's atrributes passed as media device's platform data
+ * @subdev: image sensor v4l2 subdev
+ * @host: fimc device the sensor is currently linked to
+ *
+ * This data structure applies to image sensor and the writeback subdevs.
+ */
+struct fimc_sensor_info {
+ struct fimc_source_info pdata;
+ struct v4l2_subdev *subdev;
+ struct fimc_dev *host;
+};
+
+/**
+ * struct fimc_md - fimc media device information
+ * @csis: MIPI CSIS subdevs data
+ * @sensor: array of registered sensor subdevs
+ * @num_sensors: actual number of registered sensors
+ * @camclk: external sensor clock information
+ * @fimc: array of registered fimc devices
+ * @media_dev: top level media device
+ * @v4l2_dev: top level v4l2_device holding up the subdevs
+ * @pdev: platform device this media device is hooked up into
+ * @user_subdev_api: true if subdevs are not configured by the host driver
+ * @slock: spinlock protecting @sensor array
+ */
+struct fimc_md {
+ struct fimc_csis_info csis[CSIS_MAX_ENTITIES];
+ struct fimc_sensor_info sensor[FIMC_MAX_SENSORS];
+ int num_sensors;
+ struct fimc_camclk_info camclk[FIMC_MAX_CAMCLKS];
+ struct fimc_lite *fimc_lite[FIMC_LITE_MAX_DEVS];
+ struct media_device media_dev;
+ struct v4l2_device v4l2_dev;
+ struct platform_device *pdev;
+ spinlock_t slock;
+};
+
+struct exynos5_pipeline0 {
+ int is_init;
+ struct fimc_md *fmd;
+ struct v4l2_subdev *subdevs[IDX_MAX];
+ void (*sensor_notify)(struct v4l2_subdev *sd,
+ unsigned int notification, void *arg);
+};
+
+#define is_subdev_pad(pad) (pad == NULL || \
+ media_entity_type(pad->entity) == MEDIA_ENT_T_V4L2_SUBDEV)
+
+#define me_subtype(me) \
+ ((me->type) & (MEDIA_ENT_TYPE_MASK | MEDIA_ENT_SUBTYPE_MASK))
+
+#define subdev_has_devnode(__sd) (__sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE)
+
+static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me)
+{
+ return me->parent == NULL ? NULL :
+ container_of(me->parent, struct fimc_md, media_dev);
+}
+
+#endif /* EXYNOS5_MDEVICE_H_ */
This patch adds support for media device for EXYNOS5 SoCs. The current media device supports the following ips to connect through the media controller framework. * MIPI-CSIS Support interconnection(subdev interface) between devices * FIMC-LITE Support capture interface from device(Sensor, MIPI-CSIS) to memory Support interconnection(subdev interface) between devices G-Scaler will be added later to the current media device. * Gscaler: general scaler Support memory to memory interface Support output interface from memory to display device(LCD, TV) Support capture interface from device(FIMC-LITE, FIMD) to memory --> media 0 Camera Capture path consists of MIPI-CSIS, FIMC-LITE and G-Scaler +--------+ +-----------+ +-----------------+ | Sensor | --> | FIMC-LITE | --> | G-Scaler-capture | +--------+ +-----------+ +-----------------+ +--------+ +-----------+ +-----------+ +-----------------+ | Sensor | --> | MIPI-CSIS | --> | FIMC-LITE | --> | G-Scaler-capture | +--------+ +-----------+ +-----------+ +-----------------+ Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> --- .../devicetree/bindings/media/exynos5-mdev.txt | 153 +++ drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 1 + drivers/media/platform/exynos5-is/Kconfig | 7 + drivers/media/platform/exynos5-is/Makefile | 4 + drivers/media/platform/exynos5-is/exynos5-mdev.c | 1131 ++++++++++++++++++++ drivers/media/platform/exynos5-is/exynos5-mdev.h | 120 +++ 7 files changed, 1417 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-mdev.txt create mode 100644 drivers/media/platform/exynos5-is/Kconfig create mode 100644 drivers/media/platform/exynos5-is/Makefile create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h