spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO

Commit Message

Wenyou Yang May 2, 2013, 11:25 a.m. UTC

From: Richard Genoud <[e-mail]>

Fix using PIO transfer mode only support 8 bits transfer, doesn't support 16 bits.

Signed-off-by: Richard Genoud <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
[[e-mail]: submit the patch]
Signed-off-by: Wenyou Yang <[e-mail]>
---
 drivers/spi/spi-atmel.c |   47 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 38 insertions(+), 9 deletions(-)

Comments

Mark Brown May 2, 2013, 1:41 p.m. UTC | #1

On Thu, May 02, 2013 at 07:25:11PM +0800, Wenyou Yang wrote:
> From: Richard Genoud <[e-mail]>
> 
> Fix using PIO transfer mode only support 8 bits transfer, doesn't support 16 bits.

Applied, thanks.

Patch

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 787bd2c..d8cb7da 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -526,13 +526,17 @@  static void atmel_spi_next_xfer_pio(struct spi_master *master,
 	}
 
 	if (xfer->tx_buf)
-		spi_writel(as, TDR, *(u8 *)(xfer->tx_buf));
+		if (xfer->bits_per_word > 8)
+			spi_writel(as, TDR, *(u16 *)(xfer->tx_buf));
+		else
+			spi_writel(as, TDR, *(u8 *)(xfer->tx_buf));
 	else
 		spi_writel(as, TDR, 0);
 
 	dev_dbg(master->dev.parent,
-		"  start pio xfer %p: len %u tx %p rx %p\n",
-		xfer, xfer->len, xfer->tx_buf, xfer->rx_buf);
+		"  start pio xfer %p: len %u tx %p rx %p bitpw %d\n",
+		xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
+		xfer->bits_per_word);
 
 	/* Enable relevant interrupts */
 	spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
@@ -950,21 +954,39 @@  atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
 {
 	u8		*txp;
 	u8		*rxp;
+	u16		*txp16;
+	u16		*rxp16;
 	unsigned long	xfer_pos = xfer->len - as->current_remaining_bytes;
 
 	if (xfer->rx_buf) {
-		rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
-		*rxp = spi_readl(as, RDR);
+		if (xfer->bits_per_word > 8) {
+			rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos);
+			*rxp16 = spi_readl(as, RDR);
+		} else {
+			rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
+			*rxp = spi_readl(as, RDR);
+		}
 	} else {
 		spi_readl(as, RDR);
 	}
-
-	as->current_remaining_bytes--;
+	if (xfer->bits_per_word > 8) {
+		as->current_remaining_bytes -= 2;
+		if (as->current_remaining_bytes < 0)
+			as->current_remaining_bytes = 0;
+	} else {
+		as->current_remaining_bytes--;
+	}
 
 	if (as->current_remaining_bytes) {
 		if (xfer->tx_buf) {
-			txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1;
-			spi_writel(as, TDR, *txp);
+			if (xfer->bits_per_word > 8) {
+				txp16 = (u16 *)(((u8 *)xfer->tx_buf)
+							+ xfer_pos + 2);
+				spi_writel(as, TDR, *txp16);
+			} else {
+				txp = ((u8 *)xfer->tx_buf) + xfer_pos + 1;
+				spi_writel(as, TDR, *txp);
+			}
 		} else {
 			spi_writel(as, TDR, 0);
 		}
@@ -1378,6 +1400,13 @@  static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 			}
 		}
 
+		if (xfer->bits_per_word > 8) {
+			if (xfer->len % 2) {
+				dev_dbg(&spi->dev, "buffer len should be 16 bits aligned\n");
+				return -EINVAL;
+			}
+		}
+
 		/* FIXME implement these protocol options!! */
 		if (xfer->speed_hz) {
 			dev_dbg(&spi->dev, "no protocol options yet\n");