| Message ID | 1367563919-2880-1-git-send-email-prabhakar.csengg@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday 03 May 2013, Prabhakar Lad wrote: > > +static struct mt9p031_platform_data * > +mt9p031_get_pdata(struct i2c_client *client) > +{ > + struct device_node *np; > + struct mt9p031_platform_data *pdata; > + > + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) > + return client->dev.platform_data; > + > + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); > + if (!np) > + return NULL; > + > + pdata = devm_kzalloc(&client->dev, sizeof(struct mt9p031_platform_data), > + GFP_KERNEL); > + if (!pdata) > + return NULL; > + > + pdata->reset = of_get_named_gpio(client->dev.of_node, "gpio-reset", 0); > + of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq); > + of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq); > + > + return pdata; > +} Ok, good. > @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client *client, > mt9p031->pdata = pdata; > mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; > mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; > - mt9p031->model = did->driver_data; > + > + if (!client->dev.of_node) { > + mt9p031->model = (enum mt9p031_model)did->driver_data; > + } else { > + const struct of_device_id *of_id; > + > + of_id = of_match_device(of_match_ptr(mt9p031_of_match), > + &client->dev); > + if (of_id) > + mt9p031->model = (enum mt9p031_model)of_id->data; > + } > mt9p031->reset = -1; Is this actually required? I thought the i2c core just compared the part of the "compatible" value after the first comma to the string, so "mt9p031->model = (enum mt9p031_model)did->driver_data" should work in both cases. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnd, On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: > On Friday 03 May 2013, Prabhakar Lad wrote: >> [snip] >> +} > > Ok, good. > >> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client *client, >> mt9p031->pdata = pdata; >> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; >> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; >> - mt9p031->model = did->driver_data; >> + >> + if (!client->dev.of_node) { >> + mt9p031->model = (enum mt9p031_model)did->driver_data; >> + } else { >> + const struct of_device_id *of_id; >> + >> + of_id = of_match_device(of_match_ptr(mt9p031_of_match), >> + &client->dev); >> + if (of_id) >> + mt9p031->model = (enum mt9p031_model)of_id->data; >> + } >> mt9p031->reset = -1; > > Is this actually required? I thought the i2c core just compared the > part of the "compatible" value after the first comma to the string, so > "mt9p031->model = (enum mt9p031_model)did->driver_data" should work > in both cases. > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" but I see still few drivers doing this, I am not sure for what reason. If everyone is OK with it I can drop the above change. Laurent, Sascha what do you suggest ? Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnd, On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad <prabhakar.csengg@gmail.com> wrote: > Hi Arnd, > > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: >> On Friday 03 May 2013, Prabhakar Lad wrote: >>> > [snip] >>> +} >> >> Ok, good. >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client *client, >>> mt9p031->pdata = pdata; >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; >>> - mt9p031->model = did->driver_data; >>> + >>> + if (!client->dev.of_node) { >>> + mt9p031->model = (enum mt9p031_model)did->driver_data; >>> + } else { >>> + const struct of_device_id *of_id; >>> + >>> + of_id = of_match_device(of_match_ptr(mt9p031_of_match), >>> + &client->dev); >>> + if (of_id) >>> + mt9p031->model = (enum mt9p031_model)of_id->data; >>> + } >>> mt9p031->reset = -1; >> >> Is this actually required? I thought the i2c core just compared the >> part of the "compatible" value after the first comma to the string, so >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should work >> in both cases. >> > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" > but I see still few drivers doing this, I am not sure for what reason. > If everyone is > OK with it I can drop the above change. > My bad, while booting with DT the i2c_device_id ie did in this case will be NULL, so the above changes are required :-) Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Prabhakar, Thank you for the patch. On Friday 03 May 2013 12:21:59 Prabhakar Lad wrote: > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > add OF support for the mt9p031 sensor driver. > Alongside this patch sorts the header inclusion alphabetically. > > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@redhat.com> > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Grant Likely <grant.likely@secretlab.ca> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Rob Landley <rob@landley.net> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: devicetree-discuss@lists.ozlabs.org > Cc: davinci-linux-open-source@linux.davincidsp.com > Cc: linux-doc@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > --- > Changes for v2: > 1: Used '-' instead of '_' for device properties. > 2: Specified gpio reset pin as phandle in device node. > 3: Handle platform data properly even if kernel is compiled with > devicetree support. > 4: Used dev_* for messages in drivers instead of pr_*. > 5: Changed compatible property to "aptina,mt9p031" and "aptina,mt9p031m". > 6: Sorted the header inclusion alphabetically and fixed some minor code > nits. > > Changes for v3: > 1: Dropped check if gpio-reset is valid. > 2: Fixed some code nits. > 3: Included a reference to the V4L2 DT bindings documentation. > > .../devicetree/bindings/media/i2c/mt9p031.txt | 40 +++++++++++++ > drivers/media/i2c/mt9p031.c | 60 ++++++++++++++++- > 2 files changed, 97 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode > 100644 > index 0000000..e740541 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > @@ -0,0 +1,40 @@ > +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor > + > +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor > with +an active array size of 2592H x 1944V. It is programmable through a > simple +two-wire serial interface. > + > +Required Properties : > +- compatible : value should be either one among the following > + (a) "aptina,mt9p031" for mt9p031 sensor > + (b) "aptina,mt9p031m" for mt9p031m sensor > + > +- input-clock-frequency : Input clock frequency. > + > +- pixel-clock-frequency : Pixel clock frequency. > + > +Optional Properties : > +-gpio-reset: Chip reset GPIO According to Documentation/devicetree/bindings/gpio/gpio.txt, this should be "gpios" or "reset-gpios". > + > +For further reading of port node refer > Documentation/devicetree/bindings/media/ +video-interfaces.txt. > + > +Example: > + > + i2c0@1c22000 { > + ... > + ... > + mt9p031@5d { > + compatible = "aptina,mt9p031"; > + reg = <0x5d>; > + gpio-reset = <&gpio3 30 0>; > + > + port { > + mt9p031_1: endpoint { > + input-clock-frequency = <6000000>; > + pixel-clock-frequency = <96000000>; > + }; > + }; > + }; > + ... > + };
Hi Prabhakar, On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: > On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: > > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: > >> On Friday 03 May 2013, Prabhakar Lad wrote: > > [snip] > > > >>> +} > >> > >> Ok, good. > >> > >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client *client, > >>> > >>> mt9p031->pdata = pdata; > >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; > >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; > >>> > >>> - mt9p031->model = did->driver_data; > >>> + > >>> + if (!client->dev.of_node) { > >>> + mt9p031->model = (enum mt9p031_model)did->driver_data; > >>> + } else { > >>> + const struct of_device_id *of_id; > >>> + > >>> + of_id = of_match_device(of_match_ptr(mt9p031_of_match), > >>> + &client->dev); > >>> + if (of_id) > >>> + mt9p031->model = (enum > >>> mt9p031_model)of_id->data; > >>> + } > >>> > >>> mt9p031->reset = -1; > >> > >> Is this actually required? I thought the i2c core just compared the > >> part of the "compatible" value after the first comma to the string, so > >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should work > >> in both cases. > > > > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" > > but I see still few drivers doing this, I am not sure for what reason. > > If everyone is > > OK with it I can drop the above change. > > My bad, while booting with DT the i2c_device_id ie did in this case will be > NULL, so the above changes are required :-) I've just tested your patch, and did isn't NULL when booting my Beagleboard with DT (on v3.9-rc5).
HI Laurent, On Wed, May 8, 2013 at 7:31 AM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Prabhakar, > > Thank you for the patch. > > On Friday 03 May 2013 12:21:59 Prabhakar Lad wrote: >> From: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> >> add OF support for the mt9p031 sensor driver. >> Alongside this patch sorts the header inclusion alphabetically. >> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> >> Cc: Hans Verkuil <hans.verkuil@cisco.com> >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> >> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> >> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> >> Cc: Sakari Ailus <sakari.ailus@iki.fi> >> Cc: Grant Likely <grant.likely@secretlab.ca> >> Cc: Sascha Hauer <s.hauer@pengutronix.de> >> Cc: Rob Herring <rob.herring@calxeda.com> >> Cc: Rob Landley <rob@landley.net> >> Cc: Arnd Bergmann <arnd@arndb.de> >> Cc: devicetree-discuss@lists.ozlabs.org >> Cc: davinci-linux-open-source@linux.davincidsp.com >> Cc: linux-doc@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> --- >> Changes for v2: >> 1: Used '-' instead of '_' for device properties. >> 2: Specified gpio reset pin as phandle in device node. >> 3: Handle platform data properly even if kernel is compiled with >> devicetree support. >> 4: Used dev_* for messages in drivers instead of pr_*. >> 5: Changed compatible property to "aptina,mt9p031" and "aptina,mt9p031m". >> 6: Sorted the header inclusion alphabetically and fixed some minor code >> nits. >> >> Changes for v3: >> 1: Dropped check if gpio-reset is valid. >> 2: Fixed some code nits. >> 3: Included a reference to the V4L2 DT bindings documentation. >> >> .../devicetree/bindings/media/i2c/mt9p031.txt | 40 +++++++++++++ >> drivers/media/i2c/mt9p031.c | 60 ++++++++++++++++- >> 2 files changed, 97 insertions(+), 3 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt >> b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode >> 100644 >> index 0000000..e740541 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt >> @@ -0,0 +1,40 @@ >> +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor >> + >> +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor >> with +an active array size of 2592H x 1944V. It is programmable through a >> simple +two-wire serial interface. >> + >> +Required Properties : >> +- compatible : value should be either one among the following >> + (a) "aptina,mt9p031" for mt9p031 sensor >> + (b) "aptina,mt9p031m" for mt9p031m sensor >> + >> +- input-clock-frequency : Input clock frequency. >> + >> +- pixel-clock-frequency : Pixel clock frequency. >> + >> +Optional Properties : >> +-gpio-reset: Chip reset GPIO > > According to Documentation/devicetree/bindings/gpio/gpio.txt, this should be > "gpios" or "reset-gpios". > OK I'll make it as "reset-gpios" Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Laurent, On Wed, May 8, 2013 at 7:32 AM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Prabhakar, > > On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: >> On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: >> > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: >> >> On Friday 03 May 2013, Prabhakar Lad wrote: >> > [snip] >> > >> >>> +} >> >> >> >> Ok, good. >> >> >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client *client, >> >>> >> >>> mt9p031->pdata = pdata; >> >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; >> >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; >> >>> >> >>> - mt9p031->model = did->driver_data; >> >>> + >> >>> + if (!client->dev.of_node) { >> >>> + mt9p031->model = (enum mt9p031_model)did->driver_data; >> >>> + } else { >> >>> + const struct of_device_id *of_id; >> >>> + >> >>> + of_id = of_match_device(of_match_ptr(mt9p031_of_match), >> >>> + &client->dev); >> >>> + if (of_id) >> >>> + mt9p031->model = (enum >> >>> mt9p031_model)of_id->data; >> >>> + } >> >>> >> >>> mt9p031->reset = -1; >> >> >> >> Is this actually required? I thought the i2c core just compared the >> >> part of the "compatible" value after the first comma to the string, so >> >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should work >> >> in both cases. >> > >> > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" >> > but I see still few drivers doing this, I am not sure for what reason. >> > If everyone is >> > OK with it I can drop the above change. >> >> My bad, while booting with DT the i2c_device_id ie did in this case will be >> NULL, so the above changes are required :-) > > I've just tested your patch, and did isn't NULL when booting my Beagleboard > with DT (on v3.9-rc5). > I am pretty much sure you tested it compatible property as "aptina,mt9p031" if the compatible property is set to "aptina,mt9p031m" the did will be NULL. Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Prabhakar, On Wednesday 08 May 2013 10:19:57 Prabhakar Lad wrote: > On Wed, May 8, 2013 at 7:32 AM, Laurent Pinchart wrote: > > On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: > >> On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: > >> > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: > >> >> On Friday 03 May 2013, Prabhakar Lad wrote: > >> > [snip] > >> > > >> >>> +} > >> >> > >> >> Ok, good. > >> >> > >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client > >> >>> *client, > >> >>> > >> >>> mt9p031->pdata = pdata; > >> >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; > >> >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; > >> >>> > >> >>> - mt9p031->model = did->driver_data; > >> >>> + > >> >>> + if (!client->dev.of_node) { > >> >>> + mt9p031->model = (enum > >> >>> mt9p031_model)did->driver_data; > >> >>> + } else { > >> >>> + const struct of_device_id *of_id; > >> >>> + > >> >>> + of_id = > >> >>> of_match_device(of_match_ptr(mt9p031_of_match), > >> >>> + &client->dev); > >> >>> + if (of_id) > >> >>> + mt9p031->model = (enum > >> >>> mt9p031_model)of_id->data; > >> >>> + } > >> >>> > >> >>> mt9p031->reset = -1; > >> >> > >> >> Is this actually required? I thought the i2c core just compared the > >> >> part of the "compatible" value after the first comma to the string, so > >> >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should work > >> >> in both cases. > >> > > >> > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" > >> > but I see still few drivers doing this, I am not sure for what reason. > >> > If everyone is OK with it I can drop the above change. > >> > >> My bad, while booting with DT the i2c_device_id ie did in this case will > >> be NULL, so the above changes are required :-) > > > > I've just tested your patch, and did isn't NULL when booting my > > Beagleboard with DT (on v3.9-rc5). > > I am pretty much sure you tested it compatible property as "aptina,mt9p031" > if the compatible property is set to "aptina,mt9p031m" the did will be NULL. I've tested both :-)
Hi Laurent, On Wed, May 8, 2013 at 4:07 PM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Prabhakar, > > On Wednesday 08 May 2013 10:19:57 Prabhakar Lad wrote: >> On Wed, May 8, 2013 at 7:32 AM, Laurent Pinchart wrote: >> > On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: >> >> On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: >> >> > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: >> >> >> On Friday 03 May 2013, Prabhakar Lad wrote: >> >> > [snip] >> >> > >> >> >>> +} >> >> >> >> >> >> Ok, good. >> >> >> >> >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client >> >> >>> *client, >> >> >>> >> >> >>> mt9p031->pdata = pdata; >> >> >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; >> >> >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; >> >> >>> >> >> >>> - mt9p031->model = did->driver_data; >> >> >>> + >> >> >>> + if (!client->dev.of_node) { >> >> >>> + mt9p031->model = (enum >> >> >>> mt9p031_model)did->driver_data; >> >> >>> + } else { >> >> >>> + const struct of_device_id *of_id; >> >> >>> + >> >> >>> + of_id = >> >> >>> of_match_device(of_match_ptr(mt9p031_of_match), >> >> >>> + &client->dev); >> >> >>> + if (of_id) >> >> >>> + mt9p031->model = (enum >> >> >>> mt9p031_model)of_id->data; >> >> >>> + } >> >> >>> >> >> >>> mt9p031->reset = -1; >> >> >> >> >> >> Is this actually required? I thought the i2c core just compared the >> >> >> part of the "compatible" value after the first comma to the string, so >> >> >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should work >> >> >> in both cases. >> >> > >> >> > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" >> >> > but I see still few drivers doing this, I am not sure for what reason. >> >> > If everyone is OK with it I can drop the above change. >> >> >> >> My bad, while booting with DT the i2c_device_id ie did in this case will >> >> be NULL, so the above changes are required :-) >> > >> > I've just tested your patch, and did isn't NULL when booting my >> > Beagleboard with DT (on v3.9-rc5). >> >> I am pretty much sure you tested it compatible property as "aptina,mt9p031" >> if the compatible property is set to "aptina,mt9p031m" the did will be NULL. > > I've tested both :-) > Thanks for the testing :-) I'll remove this changes in the next version. Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, May 08, 2013 at 12:37:29PM +0200, Laurent Pinchart wrote: > Hi Prabhakar, > > On Wednesday 08 May 2013 10:19:57 Prabhakar Lad wrote: > > On Wed, May 8, 2013 at 7:32 AM, Laurent Pinchart wrote: > > > On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: > > >> On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: > > >> > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann <arnd@arndb.de> wrote: > > >> >> On Friday 03 May 2013, Prabhakar Lad wrote: > > >> > [snip] > > >> > > > >> >>> +} > > >> >> > > >> >> Ok, good. > > >> >> > > >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client > > >> >>> *client, > > >> >>> > > >> >>> mt9p031->pdata = pdata; > > >> >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; > > >> >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; > > >> >>> > > >> >>> - mt9p031->model = did->driver_data; > > >> >>> + > > >> >>> + if (!client->dev.of_node) { > > >> >>> + mt9p031->model = (enum > > >> >>> mt9p031_model)did->driver_data; > > >> >>> + } else { > > >> >>> + const struct of_device_id *of_id; > > >> >>> + > > >> >>> + of_id = > > >> >>> of_match_device(of_match_ptr(mt9p031_of_match), > > >> >>> + &client->dev); > > >> >>> + if (of_id) > > >> >>> + mt9p031->model = (enum > > >> >>> mt9p031_model)of_id->data; > > >> >>> + } > > >> >>> > > >> >>> mt9p031->reset = -1; > > >> >> > > >> >> Is this actually required? I thought the i2c core just compared the > > >> >> part of the "compatible" value after the first comma to the string, so > > >> >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should work > > >> >> in both cases. At least on v3.8 I just checked that 'did' is indeed NULL for the devicetree case. Also I see no indication that i2c starts comparing after the first comma in the string. > > >> > > > >> > I am OK with "mt9p031->model = (enum mt9p031_model)did->driver_data" > > >> > but I see still few drivers doing this, I am not sure for what reason. > > >> > If everyone is OK with it I can drop the above change. > > >> > > >> My bad, while booting with DT the i2c_device_id ie did in this case will > > >> be NULL, so the above changes are required :-) > > > > > > I've just tested your patch, and did isn't NULL when booting my > > > Beagleboard with DT (on v3.9-rc5). > > > > I am pretty much sure you tested it compatible property as "aptina,mt9p031" > > if the compatible property is set to "aptina,mt9p031m" the did will be NULL. > > I've tested both :-) Sorry to nag, but did you use "aptina,mt9p031[m]" as a compatible string or did you use "mt9p031[m]". With "aptina,..." 'did' should really be NULL. Sascha
Hi Sascha, On Monday 13 May 2013 12:46:04 Sascha Hauer wrote: > On Wed, May 08, 2013 at 12:37:29PM +0200, Laurent Pinchart wrote: > > Hi Prabhakar, > > > > On Wednesday 08 May 2013 10:19:57 Prabhakar Lad wrote: > > > On Wed, May 8, 2013 at 7:32 AM, Laurent Pinchart wrote: > > > > On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: > > > >> On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: > > > >> > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann wrote: > > > >> >> On Friday 03 May 2013, Prabhakar Lad wrote: > > > >> > [snip] > > > >> > > > > >> >>> +} > > > >> >> > > > >> >> Ok, good. > > > >> >> > > > >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client > > > >> >>> *client, > > > >> >>> > > > >> >>> mt9p031->pdata = pdata; > > > >> >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; > > > >> >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; > > > >> >>> > > > >> >>> - mt9p031->model = did->driver_data; > > > >> >>> + > > > >> >>> + if (!client->dev.of_node) { > > > >> >>> + mt9p031->model = (enum > > > >> >>> mt9p031_model)did->driver_data; > > > >> >>> + } else { > > > >> >>> + const struct of_device_id *of_id; > > > >> >>> + > > > >> >>> + of_id = > > > >> >>> of_match_device(of_match_ptr(mt9p031_of_match), > > > >> >>> + &client->dev); > > > >> >>> + if (of_id) > > > >> >>> + mt9p031->model = (enum > > > >> >>> mt9p031_model)of_id->data; > > > >> >>> + } > > > >> >>> > > > >> >>> mt9p031->reset = -1; > > > >> >> > > > >> >> Is this actually required? I thought the i2c core just compared > > > >> >> the > > > >> >> part of the "compatible" value after the first comma to the > > > >> >> string, so > > > >> >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should > > > >> >> work > > > >> >> in both cases. > > At least on v3.8 I just checked that 'did' is indeed NULL for the > devicetree case. Also I see no indication that i2c starts comparing > after the first comma in the string. > > > > >> > I am OK with "mt9p031->model = (enum > > > >> > mt9p031_model)did->driver_data" > > > >> > but I see still few drivers doing this, I am not sure for what > > > >> > reason. > > > >> > If everyone is OK with it I can drop the above change. > > > >> > > > >> My bad, while booting with DT the i2c_device_id ie did in this case > > > >> will > > > >> be NULL, so the above changes are required :-) > > > > > > > > I've just tested your patch, and did isn't NULL when booting my > > > > Beagleboard with DT (on v3.9-rc5). > > > > > > I am pretty much sure you tested it compatible property as > > > "aptina,mt9p031" > > > if the compatible property is set to "aptina,mt9p031m" the did will be > > > NULL.> > > I've tested both :-) > > Sorry to nag, but did you use "aptina,mt9p031[m]" as a compatible string or > did you use "mt9p031[m]". With "aptina,..." 'did' should really be NULL. I've used "aptina,mt9p031[m]". Please see the of_modalias_node() call in of_i2c_register_devices() (drivers/of/of-i2c.c), that's where the I2C device type name should be initialized.
On Tue, May 14, 2013 at 12:59:27AM +0200, Laurent Pinchart wrote: > Hi Sascha, > > On Monday 13 May 2013 12:46:04 Sascha Hauer wrote: > > On Wed, May 08, 2013 at 12:37:29PM +0200, Laurent Pinchart wrote: > > > Hi Prabhakar, > > > > > > On Wednesday 08 May 2013 10:19:57 Prabhakar Lad wrote: > > > > On Wed, May 8, 2013 at 7:32 AM, Laurent Pinchart wrote: > > > > > On Tuesday 07 May 2013 15:10:36 Prabhakar Lad wrote: > > > > >> On Mon, May 6, 2013 at 8:29 PM, Prabhakar Lad wrote: > > > > >> > On Fri, May 3, 2013 at 8:04 PM, Arnd Bergmann wrote: > > > > >> >> On Friday 03 May 2013, Prabhakar Lad wrote: > > > > >> > [snip] > > > > >> > > > > > >> >>> +} > > > > >> >> > > > > >> >> Ok, good. > > > > >> >> > > > > >> >>> @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client > > > > >> >>> *client, > > > > >> >>> > > > > >> >>> mt9p031->pdata = pdata; > > > > >> >>> mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; > > > > >> >>> mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; > > > > >> >>> > > > > >> >>> - mt9p031->model = did->driver_data; > > > > >> >>> + > > > > >> >>> + if (!client->dev.of_node) { > > > > >> >>> + mt9p031->model = (enum > > > > >> >>> mt9p031_model)did->driver_data; > > > > >> >>> + } else { > > > > >> >>> + const struct of_device_id *of_id; > > > > >> >>> + > > > > >> >>> + of_id = > > > > >> >>> of_match_device(of_match_ptr(mt9p031_of_match), > > > > >> >>> + &client->dev); > > > > >> >>> + if (of_id) > > > > >> >>> + mt9p031->model = (enum > > > > >> >>> mt9p031_model)of_id->data; > > > > >> >>> + } > > > > >> >>> > > > > >> >>> mt9p031->reset = -1; > > > > >> >> > > > > >> >> Is this actually required? I thought the i2c core just compared > > > > >> >> the > > > > >> >> part of the "compatible" value after the first comma to the > > > > >> >> string, so > > > > >> >> "mt9p031->model = (enum mt9p031_model)did->driver_data" should > > > > >> >> work > > > > >> >> in both cases. > > > > At least on v3.8 I just checked that 'did' is indeed NULL for the > > devicetree case. Also I see no indication that i2c starts comparing > > after the first comma in the string. > > > > > > >> > I am OK with "mt9p031->model = (enum > > > > >> > mt9p031_model)did->driver_data" > > > > >> > but I see still few drivers doing this, I am not sure for what > > > > >> > reason. > > > > >> > If everyone is OK with it I can drop the above change. > > > > >> > > > > >> My bad, while booting with DT the i2c_device_id ie did in this case > > > > >> will > > > > >> be NULL, so the above changes are required :-) > > > > > > > > > > I've just tested your patch, and did isn't NULL when booting my > > > > > Beagleboard with DT (on v3.9-rc5). > > > > > > > > I am pretty much sure you tested it compatible property as > > > > "aptina,mt9p031" > > > > if the compatible property is set to "aptina,mt9p031m" the did will be > > > > NULL.> > > > I've tested both :-) > > > > Sorry to nag, but did you use "aptina,mt9p031[m]" as a compatible string or > > did you use "mt9p031[m]". With "aptina,..." 'did' should really be NULL. > > I've used "aptina,mt9p031[m]". > > Please see the of_modalias_node() call in of_i2c_register_devices() > (drivers/of/of-i2c.c), that's where the I2C device type name should be > initialized. Ok, got it. I still had the older aptina,mt9p031m-sensor binding in my patch. Sorry for the noise. Sascha
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode 100644 index 0000000..e740541 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt @@ -0,0 +1,40 @@ +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 2592H x 1944V. It is programmable through a simple +two-wire serial interface. + +Required Properties : +- compatible : value should be either one among the following + (a) "aptina,mt9p031" for mt9p031 sensor + (b) "aptina,mt9p031m" for mt9p031m sensor + +- input-clock-frequency : Input clock frequency. + +- pixel-clock-frequency : Pixel clock frequency. + +Optional Properties : +-gpio-reset: Chip reset GPIO + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + gpio-reset = <&gpio3 30 0>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index 28cf95b..4514f8f 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -16,9 +16,11 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio.h> -#include <linux/module.h> #include <linux/i2c.h> #include <linux/log2.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/pm.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -28,6 +30,7 @@ #include <media/v4l2-chip-ident.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> +#include <media/v4l2-of.h> #include <media/v4l2-subdev.h> #include "aptina-pll.h" @@ -928,10 +931,50 @@ static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { * Driver initialization and probing */ +static struct mt9p031_platform_data * +mt9p031_get_pdata(struct i2c_client *client) +{ + struct device_node *np; + struct mt9p031_platform_data *pdata; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!np) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(struct mt9p031_platform_data), + GFP_KERNEL); + if (!pdata) + return NULL; + + pdata->reset = of_get_named_gpio(client->dev.of_node, "gpio-reset", 0); + of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq); + of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq); + + return pdata; +} + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mt9p031_of_match[] = { + { + .compatible = "aptina,mt9p031", + .data = (void *)MT9P031_MODEL_COLOR, + }, { + .compatible = "aptina,mt9p031m", + .data = (void *)MT9P031_MODEL_MONOCHROME, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, mt9p031_of_match); +#endif + static int mt9p031_probe(struct i2c_client *client, const struct i2c_device_id *did) { - struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct mt9p031 *mt9p031; unsigned int i; @@ -955,7 +998,17 @@ static int mt9p031_probe(struct i2c_client *client, mt9p031->pdata = pdata; mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; - mt9p031->model = did->driver_data; + + if (!client->dev.of_node) { + mt9p031->model = (enum mt9p031_model)did->driver_data; + } else { + const struct of_device_id *of_id; + + of_id = of_match_device(of_match_ptr(mt9p031_of_match), + &client->dev); + if (of_id) + mt9p031->model = (enum mt9p031_model)of_id->data; + } mt9p031->reset = -1; mt9p031->vaa = devm_regulator_get(&client->dev, "vaa"); @@ -1072,6 +1125,7 @@ MODULE_DEVICE_TABLE(i2c, mt9p031_id); static struct i2c_driver mt9p031_i2c_driver = { .driver = { + .of_match_table = of_match_ptr(mt9p031_of_match), .name = "mt9p031", }, .probe = mt9p031_probe,