new file mode 100644
@@ -0,0 +1,26 @@
+Davicom DM9000 Fast Ethernet controller
+
+Required properties:
+- compatible = "davicom,dm9000";
+- reg : physical addresses and sizes of registers, must contain 2 entries:
+ first entry : address register,
+ second entry : data register.
+- interrupt-parent : interrupt controller to which the device is connected
+- interrupts : interrupt specifier specific to interrupt controller
+
+Optional properties:
+- local-mac-address : A bytestring of 6 bytes specifying Ethernet MAC address
+ to use (from firmware or bootloader)
+- davicom,no-eeprom : Configuration EEPROM is not available
+- davicom,ext-phy : Use external PHY
+
+Example:
+
+ ethernet@18000000 {
+ compatible = "davicom,dm9000";
+ reg = <0x18000000 0x2 0x18000004 0x2>;
+ interrupt-parent = <&gpn>;
+ interrupts = <7 4>;
+ local-mac-address = [00 00 de ad be ef];
+ davicom,no-eeprom;
+ };
@@ -18,6 +18,7 @@ chrp Common Hardware Reference Platform
cirrus Cirrus Logic, Inc.
cortina Cortina Systems, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
+davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
emmicro EM Microelectronic
epson Seiko Epson Corp.
@@ -29,6 +29,8 @@
#include <linux/spinlock.h>
#include <linux/crc32.h>
#include <linux/mii.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
#include <linux/ethtool.h>
#include <linux/dm9000.h>
#include <linux/delay.h>
@@ -1358,6 +1360,31 @@ static const struct net_device_ops dm9000_netdev_ops = {
#endif
};
+static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev)
+{
+ struct dm9000_plat_data *pdata;
+ struct device_node *np = dev->of_node;
+ const void *mac_addr;
+
+ if (!IS_ENABLED(CONFIG_OF) || !np)
+ return NULL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ if (of_find_property(np, "davicom,ext-phy", NULL))
+ pdata->flags |= DM9000_PLATF_EXT_PHY;
+ if (of_find_property(np, "davicom,no-eeprom", NULL))
+ pdata->flags |= DM9000_PLATF_NO_EEPROM;
+
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(pdata->dev_addr, mac_addr, sizeof(pdata->dev_addr));
+
+ return pdata;
+}
+
/*
* Search DM9000 board, allocate space and register it
*/
@@ -1373,6 +1400,12 @@ dm9000_probe(struct platform_device *pdev)
int i;
u32 id_val;
+ if (!pdata) {
+ pdata = dm9000_parse_dt(&pdev->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ }
+
/* Init network device */
ndev = alloc_etherdev(sizeof(struct board_info));
if (!ndev)
@@ -1683,11 +1716,20 @@ dm9000_drv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id dm9000_of_matches[] = {
+ { .compatible = "davicom,dm9000", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dm9000_of_matches);
+#endif
+
static struct platform_driver dm9000_driver = {
.driver = {
.name = "dm9000",
.owner = THIS_MODULE,
.pm = &dm9000_drv_pm_ops,
+ .of_match_table = of_match_ptr(dm9000_of_matches),
},
.probe = dm9000_probe,
.remove = dm9000_drv_remove,
This patch adds Device Tree support to dm9000 driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> --- Changes since v2: - corrected a typo in bindings documentation - removed redundant error message about failed memory allocation Changes since v1: - dropped davicom,simple-phy property as it seems to be of no use - used of_get_mac_address() to get MAC address from device tree - replaced #ifdef CONFIG_OF around dm9000_parse_dt() with IS_ENABLED .../devicetree/bindings/net/davicom-dm9000.txt | 26 ++++++++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/net/ethernet/davicom/dm9000.c | 42 ++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/davicom-dm9000.txt