diff mbox

[V3,09/10] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug

Message ID 1369090911-1479-10-git-send-email-gmbnomis@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Baatz May 20, 2013, 11:01 p.m. UTC 
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
---
 arch/arm/boot/dts/Makefile                        |    2 +
 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi |   97 +++++++++++++++++++++
 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts   |   40 +++++++++
 arch/arm/boot/dts/kirkwood-sheevaplug.dts         |   45 ++++++++++
 4 files changed, 184 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
 create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug.dts

Comments

Andrew Lunn May 21, 2013, 5:11 a.m. UTC | #1 
On Tue, May 21, 2013 at 01:01:50AM +0200, Simon Baatz wrote:
> Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile                        |    2 +
>  arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi |   97 +++++++++++++++++++++
>  arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts   |   40 +++++++++
>  arch/arm/boot/dts/kirkwood-sheevaplug.dts         |   45 ++++++++++
>  4 files changed, 184 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
>  create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
>  create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b9f7121..e81a387 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -84,6 +84,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
>  	kirkwood-ns2max.dtb \
>  	kirkwood-ns2mini.dtb \
>  	kirkwood-nsa310.dtb \
> +	kirkwood-sheevaplug.dtb \
> +	kirkwood-sheevaplug-esata.dtb \
>  	kirkwood-topkick.dtb \
>  	kirkwood-ts219-6281.dtb \
>  	kirkwood-ts219-6282.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
> new file mode 100644
> index 0000000..9d59475
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
> @@ -0,0 +1,97 @@
> +/*
> + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
> + *
> + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
> + *
> + * Licensed under GPLv2
> + */
> +
> +/include/ "kirkwood.dtsi"
> +/include/ "kirkwood-6281.dtsi"
> +
> +/ {
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x20000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";
> +	};
> +
> +	ocp@f1000000 {
> +		pinctrl: pinctrl@10000 {
> +
> +			pmx_usb_power_enable: pmx-usb-power-enable {
> +				marvell,pins = "mpp29";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_red: pmx-led-red {
> +				marvell,pins = "mpp46";
> +				marvell,function = "gpio";
> +			};
> +			pmx_led_blue: pmx-led-blue {
> +				marvell,pins = "mpp49";
> +				marvell,function = "gpio";
> +			};
> +			pmx_sdio_cd: pmx-sdio-cd {
> +				marvell,pins = "mpp44";
> +				marvell,function = "gpio";
> +			};
> +			pmx_sdio_wp: pmx-sdio-wp {
> +				marvell,pins = "mpp47";
> +				marvell,function = "gpio";
> +			};
> +		};
> +		serial@12000 {
> +			status = "okay";
> +		};
> +
> +		nand@3000000 {
> +			status = "okay";
> +
> +			partition@0 {
> +				label = "u-boot";
> +				reg = <0x0000000 0x100000>;
> +			};
> +
> +			partition@100000 {
> +				label = "uImage";
> +				reg = <0x0100000 0x400000>;
> +			};
> +
> +			partition@500000 {
> +				label = "root";
> +				reg = <0x0500000 0x1fb00000>;
> +			};
> +		};
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		usb_power: regulator@1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "USB Power";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			gpio = <&gpio0 29 0>;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		health {
> +			label = "sheevaplug:blue:health";
> +			gpios = <&gpio1 17 1>;
> +			linux,default-trigger = "default-on";
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
> new file mode 100644
> index 0000000..1c6946a
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
> @@ -0,0 +1,40 @@
> +/*
> + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
> + *
> + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
> + *
> + * Licensed under GPLv2
> + */
> +
> +/dts-v1/;
> +
> +/include/ "kirkwood-sheevaplug-common.dtsi"
> +
> +/ {
> +	model = "Globalscale Technologies eSATA SheevaPlug";
> +	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> +	ocp@f1000000 {
> +		pinctrl: pinctrl@10000 {
> +
> +			pinctrl-0 = < &pmx_nand &pmx_uart0
> +				      &pmx_usb_power_enable
> +				      &pmx_led_blue>;
> +			pinctrl-names = "default";
> +
> +		};
> +
> +		sata@80000 {
> +			status = "okay";
> +			nr-ports = <2>;
> +		};
> +
> +		mvsdio@90000 {
> +			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
> +			pinctrl-names = "default";
> +			status = "okay";
> +			cd-gpios = <&gpio1 12 1>;
> +			wp-gpios = <&gpio1 15 0>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
> new file mode 100644
> index 0000000..f7684066
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
> @@ -0,0 +1,45 @@
> +/*
> + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug
> + *
> + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
> + *
> + * Licensed under GPLv2
> + */
> +
> +/dts-v1/;
> +
> +/include/ "kirkwood-sheevaplug-common.dtsi"
> +
> +/ {
> +	model = "Globalscale Technologies SheevaPlug";
> +	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> +	ocp@f1000000 {
> +		pinctrl: pinctrl@10000 {
> +
> +			pinctrl-0 = < &pmx_nand &pmx_uart0
> +				      &pmx_usb_power_enable
> +				      &pmx_led_red
> +				      &pmx_led_blue>;
> +			pinctrl-names = "default";
> +
> +		};
> +
> +		mvsdio@90000 {
> +			pinctrl-0 = <&pmx_sdio>;
> +			pinctrl-names = "default";
> +			status = "okay";
> +			/* No CD or WP GPIOs */
> +			broken-cd;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		misc {
> +			label = "sheevaplug:red:misc";
> +			gpios = <&gpio1 14 1>;
> +		};
> +	};
> +};
> -- 
> 1.7.9.5
> 

Hi Simon

Looks good

Acked-by: Andrew Lunn <andrew@lunn.ch>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121..e81a387 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -84,6 +84,8 @@  dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-ns2max.dtb \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
new file mode 100644
index 0000000..9d59475
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -0,0 +1,97 @@ 
+/*
+ * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_wp: pmx-sdio-wp {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "root";
+				reg = <0x0500000 0x1fb00000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
new file mode 100644
index 0000000..1c6946a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -0,0 +1,40 @@ 
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies eSATA SheevaPlug";
+	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart0
+				      &pmx_usb_power_enable
+				      &pmx_led_blue>;
+			pinctrl-names = "default";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 12 1>;
+			wp-gpios = <&gpio1 15 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
new file mode 100644
index 0000000..f7684066
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -0,0 +1,45 @@ 
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies SheevaPlug";
+	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart0
+				      &pmx_usb_power_enable
+				      &pmx_led_red
+				      &pmx_led_blue>;
+			pinctrl-names = "default";
+
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		misc {
+			label = "sheevaplug:red:misc";
+			gpios = <&gpio1 14 1>;
+		};
+	};
+};