Message ID | 1368806552-8851-1-git-send-email-dmurphy@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 11:02-20130517, Dan Murphy wrote: > The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es > are different. > > A1-A3 = gpio_wk7 > ES = gpio_110 > > There is no change to LED D2 > > Abstract away the pinmux and the LED definitions for the two boards into > the respective DTS files. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > Changes in this version: > - review comments incorporated. > Previous version of this patch was discussed in: > https://patchwork.kernel.org/patch/2582771/ one minor nit, $subject could do with space after the ':' otherwise, it looks fine to me. Will suggest waiting for further reviewers if they have an opinion prior to a new rev. > > arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++- > arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++ > 2 files changed, 43 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi > index 03bd60d..5fd59b3 100644 > --- a/arch/arm/boot/dts/omap4-panda-common.dtsi > +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi > @@ -16,8 +16,13 @@ > reg = <0x80000000 0x40000000>; /* 1 GB */ > }; > > - leds { > + leds: leds { > compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = < > + &led_wkgpio_pins > + >; > + > heartbeat { > label = "pandaboard::status1"; > gpios = <&gpio1 7 0>; > @@ -137,6 +142,15 @@ > }; > }; > > +&omap4_pmx_wkup { > + led_wkgpio_pins: pinmux_leds_wkpins { > + pinctrl-single,pins = < > + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ > + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ > + >; > + }; > +}; > + > &i2c1 { > pinctrl-names = "default"; > pinctrl-0 = <&i2c1_pins>; > diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts > index f1d8c21..c968a3b 100644 > --- a/arch/arm/boot/dts/omap4-panda-es.dts > +++ b/arch/arm/boot/dts/omap4-panda-es.dts > @@ -34,3 +34,31 @@ > 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ > >; > }; > + > +&omap4_pmx_core { > + led_gpio_pins: gpio_led_pmx { > + pinctrl-single,pins = < > + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ > + >; > + }; > +}; > + > +&led_wkgpio_pins { > + pinctrl-single,pins = < > + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ > + >; > +}; > + > +&leds { > + pinctrl-0 = < > + &led_gpio_pins > + &led_wkgpio_pins > + >; > + > + heartbeat { > + gpios = <&gpio4 14 0>; > + }; > + mmc { > + gpios = <&gpio1 8 0>; > + }; > +};
On 05/17/2013 11:15 AM, Nishanth Menon wrote: > On 11:02-20130517, Dan Murphy wrote: >> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es >> are different. >> >> A1-A3 = gpio_wk7 >> ES = gpio_110 >> >> There is no change to LED D2 >> >> Abstract away the pinmux and the LED definitions for the two boards into >> the respective DTS files. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> Changes in this version: >> - review comments incorporated. >> Previous version of this patch was discussed in: >> https://patchwork.kernel.org/patch/2582771/ > one minor nit, > $subject could do with space after the ':' > otherwise, it looks fine to me. Will suggest waiting for further > reviewers if they have an opinion prior to a new rev. Thanks NM I will queue up this change locally and await further review prior to sending v7. >> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++- >> arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++ >> 2 files changed, 43 insertions(+), 1 deletions(-) >> >> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi >> index 03bd60d..5fd59b3 100644 >> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi >> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi >> @@ -16,8 +16,13 @@ >> reg = <0x80000000 0x40000000>; /* 1 GB */ >> }; >> >> - leds { >> + leds: leds { >> compatible = "gpio-leds"; >> + pinctrl-names = "default"; >> + pinctrl-0 = < >> + &led_wkgpio_pins >> + >; >> + >> heartbeat { >> label = "pandaboard::status1"; >> gpios = <&gpio1 7 0>; >> @@ -137,6 +142,15 @@ >> }; >> }; >> >> +&omap4_pmx_wkup { >> + led_wkgpio_pins: pinmux_leds_wkpins { >> + pinctrl-single,pins = < >> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ >> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >> + >; >> + }; >> +}; >> + >> &i2c1 { >> pinctrl-names = "default"; >> pinctrl-0 = <&i2c1_pins>; >> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts >> index f1d8c21..c968a3b 100644 >> --- a/arch/arm/boot/dts/omap4-panda-es.dts >> +++ b/arch/arm/boot/dts/omap4-panda-es.dts >> @@ -34,3 +34,31 @@ >> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ >> >; >> }; >> + >> +&omap4_pmx_core { >> + led_gpio_pins: gpio_led_pmx { >> + pinctrl-single,pins = < >> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ >> + >; >> + }; >> +}; >> + >> +&led_wkgpio_pins { >> + pinctrl-single,pins = < >> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >> + >; >> +}; >> + >> +&leds { >> + pinctrl-0 = < >> + &led_gpio_pins >> + &led_wkgpio_pins >> + >; >> + >> + heartbeat { >> + gpios = <&gpio4 14 0>; >> + }; >> + mmc { >> + gpios = <&gpio1 8 0>; >> + }; >> +};
On 05/17/2013 11:17 AM, Dan Murphy wrote: > On 05/17/2013 11:15 AM, Nishanth Menon wrote: >> On 11:02-20130517, Dan Murphy wrote: >>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es >>> are different. >>> >>> A1-A3 = gpio_wk7 >>> ES = gpio_110 >>> >>> There is no change to LED D2 >>> >>> Abstract away the pinmux and the LED definitions for the two boards into >>> the respective DTS files. >>> >>> Signed-off-by: Dan Murphy <dmurphy@ti.com> >>> --- >>> Changes in this version: >>> - review comments incorporated. >>> Previous version of this patch was discussed in: >>> https://patchwork.kernel.org/patch/2582771/ >> one minor nit, >> $subject could do with space after the ':' >> otherwise, it looks fine to me. Will suggest waiting for further >> reviewers if they have an opinion prior to a new rev. > Thanks NM I will queue up this change locally and await further review prior to sending v7. > >>> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++- >>> arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++ >>> 2 files changed, 43 insertions(+), 1 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi >>> index 03bd60d..5fd59b3 100644 >>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi >>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi >>> @@ -16,8 +16,13 @@ >>> reg = <0x80000000 0x40000000>; /* 1 GB */ >>> }; >>> >>> - leds { >>> + leds: leds { >>> compatible = "gpio-leds"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = < >>> + &led_wkgpio_pins >>> + >; >>> + >>> heartbeat { >>> label = "pandaboard::status1"; >>> gpios = <&gpio1 7 0>; >>> @@ -137,6 +142,15 @@ >>> }; >>> }; >>> >>> +&omap4_pmx_wkup { >>> + led_wkgpio_pins: pinmux_leds_wkpins { >>> + pinctrl-single,pins = < >>> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ >>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >>> + >; >>> + }; >>> +}; >>> + >>> &i2c1 { >>> pinctrl-names = "default"; >>> pinctrl-0 = <&i2c1_pins>; >>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts >>> index f1d8c21..c968a3b 100644 >>> --- a/arch/arm/boot/dts/omap4-panda-es.dts >>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts >>> @@ -34,3 +34,31 @@ >>> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ >>> >; >>> }; >>> + >>> +&omap4_pmx_core { >>> + led_gpio_pins: gpio_led_pmx { >>> + pinctrl-single,pins = < >>> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ >>> + >; >>> + }; >>> +}; >>> + >>> +&led_wkgpio_pins { >>> + pinctrl-single,pins = < >>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >>> + >; >>> +}; >>> + >>> +&leds { >>> + pinctrl-0 = < >>> + &led_gpio_pins >>> + &led_wkgpio_pins >>> + >; >>> + >>> + heartbeat { >>> + gpios = <&gpio4 14 0>; >>> + }; >>> + mmc { >>> + gpios = <&gpio1 8 0>; >>> + }; >>> +}; > Any additional comments besides the headline? If not I will post v7
Hi Dan, On 5/24/2013 8:56 PM, Dan Murphy wrote: > On 05/17/2013 11:17 AM, Dan Murphy wrote: >> On 05/17/2013 11:15 AM, Nishanth Menon wrote: >>> On 11:02-20130517, Dan Murphy wrote: >>>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es >>>> are different. >>>> >>>> A1-A3 = gpio_wk7 >>>> ES = gpio_110 >>>> >>>> There is no change to LED D2 >>>> >>>> Abstract away the pinmux and the LED definitions for the two boards into >>>> the respective DTS files. >>>> >>>> Signed-off-by: Dan Murphy <dmurphy@ti.com> >>>> --- >>>> Changes in this version: >>>> - review comments incorporated. >>>> Previous version of this patch was discussed in: >>>> https://patchwork.kernel.org/patch/2582771/ >>> one minor nit, >>> $subject could do with space after the ':' >>> otherwise, it looks fine to me. Will suggest waiting for further >>> reviewers if they have an opinion prior to a new rev. >> Thanks NM I will queue up this change locally and await further review prior to sending v7. >> >>>> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++- >>>> arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++ >>>> 2 files changed, 43 insertions(+), 1 deletions(-) >>>> >>>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi >>>> index 03bd60d..5fd59b3 100644 >>>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi >>>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi >>>> @@ -16,8 +16,13 @@ >>>> reg = <0x80000000 0x40000000>; /* 1 GB */ >>>> }; >>>> >>>> - leds { >>>> + leds: leds { >>>> compatible = "gpio-leds"; >>>> + pinctrl-names = "default"; >>>> + pinctrl-0 = < >>>> + &led_wkgpio_pins >>>> + >; >>>> + >>>> heartbeat { >>>> label = "pandaboard::status1"; >>>> gpios = <&gpio1 7 0>; >>>> @@ -137,6 +142,15 @@ >>>> }; >>>> }; >>>> >>>> +&omap4_pmx_wkup { >>>> + led_wkgpio_pins: pinmux_leds_wkpins { >>>> + pinctrl-single,pins = < >>>> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ >>>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >>>> + >; >>>> + }; >>>> +}; >>>> + >>>> &i2c1 { >>>> pinctrl-names = "default"; >>>> pinctrl-0 = <&i2c1_pins>; >>>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts >>>> index f1d8c21..c968a3b 100644 >>>> --- a/arch/arm/boot/dts/omap4-panda-es.dts >>>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts >>>> @@ -34,3 +34,31 @@ >>>> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ >>>> >; >>>> }; >>>> + >>>> +&omap4_pmx_core { >>>> + led_gpio_pins: gpio_led_pmx { >>>> + pinctrl-single,pins = < >>>> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ >>>> + >; >>>> + }; >>>> +}; >>>> + >>>> +&led_wkgpio_pins { >>>> + pinctrl-single,pins = < >>>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ >>>> + >; >>>> +}; >>>> + >>>> +&leds { >>>> + pinctrl-0 = < >>>> + &led_gpio_pins >>>> + &led_wkgpio_pins >>>> + >; >>>> + >>>> + heartbeat { >>>> + gpios = <&gpio4 14 0>; >>>> + }; >>>> + mmc { >>>> + gpios = <&gpio1 8 0>; >>>> + }; >>>> +}; >> > Any additional comments besides the headline? > > If not I will post v7 Sorry for the delay. Go ahead and I'll take it in my dts branch for 3.11. Thanks, Benoit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 03bd60d..5fd59b3 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -16,8 +16,13 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - leds { + leds: leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = < + &led_wkgpio_pins + >; + heartbeat { label = "pandaboard::status1"; gpios = <&gpio1 7 0>; @@ -137,6 +142,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */ + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index f1d8c21..c968a3b 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -34,3 +34,31 @@ 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ >; }; + +&omap4_pmx_core { + led_gpio_pins: gpio_led_pmx { + pinctrl-single,pins = < + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */ + >; + }; +}; + +&led_wkgpio_pins { + pinctrl-single,pins = < + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */ + >; +}; + +&leds { + pinctrl-0 = < + &led_gpio_pins + &led_wkgpio_pins + >; + + heartbeat { + gpios = <&gpio4 14 0>; + }; + mmc { + gpios = <&gpio1 8 0>; + }; +};
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es are different. A1-A3 = gpio_wk7 ES = gpio_110 There is no change to LED D2 Abstract away the pinmux and the LED definitions for the two boards into the respective DTS files. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- Changes in this version: - review comments incorporated. Previous version of this patch was discussed in: https://patchwork.kernel.org/patch/2582771/ arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++- arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 1 deletions(-)