| Message ID | 1369572037-10200-1-git-send-email-prabhakar.csengg@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi All, On Sun, May 26, 2013 at 6:10 PM, Prabhakar Lad <prabhakar.csengg@gmail.com> wrote: > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > add OF support for the tvp514x driver. > > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> > Cc: Hans Verkuil <hans.verkuil@cisco.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@redhat.com> > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> > Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> > Cc: Sakari Ailus <sakari.ailus@iki.fi> > Cc: Grant Likely <grant.likely@secretlab.ca> > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Rob Landley <rob@landley.net> > Cc: devicetree-discuss@lists.ozlabs.org > Cc: linux-doc@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: davinci-linux-open-source@linux.davincidsp.com > --- > Tested on da850-evm. > > RFC v1: https://patchwork.kernel.org/patch/2030061/ > RFC v2: https://patchwork.kernel.org/patch/2061811/ > > Changes for current version from RFC v2: > 1: Fixed review comments pointed by Sylwester. > > Changes for v2: > 1: Listed all the compatible property values in the documentation text file. > 2: Removed "-decoder" from compatible property values. > 3: Added a reference to the V4L2 DT bindings documentation to explain > what the port and endpoint nodes are for. > 4: Fixed some Nits pointed by Laurent. > 5: Removed unnecessary header file includes and sort them alphabetically. > > Changes for v3: > 1: Rebased on patch https://patchwork.kernel.org/patch/2539411/ > > Changes for v4: > 1: added missing call for of_node_put(). > 2: Rebased the patch on v3.11. > > .../devicetree/bindings/media/i2c/tvp514x.txt | 45 ++++++++++++++ > drivers/media/i2c/tvp514x.c | 62 ++++++++++++++++++-- > 2 files changed, 101 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > new file mode 100644 > index 0000000..cc09424 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > @@ -0,0 +1,45 @@ > +* Texas Instruments TVP514x video decoder > + > +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip > +digital video decoder that digitizes and decodes all popular baseband analog > +video formats into digital video component. The tvp514x decoder supports analog- > +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D > +conversion and decoding of NTSC, PAL and SECAM composite and S-video into > +component YCbCr. > + > +Required Properties : > +- compatible : value should be either one among the following > + (a) "ti,tvp5146" for tvp5146 decoder. > + (b) "ti,tvp5146m2" for tvp5146m2 decoder. > + (c) "ti,tvp5147" for tvp5147 decoder. > + (d) "ti,tvp5147m1" for tvp5147m1 decoder. > + > +- hsync-active: HSYNC Polarity configuration for endpoint. > + > +- vsync-active: VSYNC Polarity configuration for endpoint. > + > +- pclk-sample: Clock polarity of the endpoint. > + > + > +For further reading of port node refer Documentation/devicetree/bindings/media/ > +video-interfaces.txt. > + > +Example: > + > + i2c0@1c22000 { > + ... > + ... > + tvp514x@5c { > + compatible = "ti,tvp5146"; > + reg = <0x5c>; > + > + port { > + tvp514x_1: endpoint { > + hsync-active = <1>; > + vsync-active = <1>; > + pclk-sample = <0>; > + }; > + }; > + }; > + ... > + }; > diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c > index 7438e01..803f3b8 100644 > --- a/drivers/media/i2c/tvp514x.c > +++ b/drivers/media/i2c/tvp514x.c > @@ -38,6 +38,7 @@ > > #include <media/v4l2-device.h> > #include <media/v4l2-common.h> > +#include <media/v4l2-of.h> > #include <media/v4l2-mediabus.h> > #include <media/v4l2-chip-ident.h> > #include <media/v4l2-ctrls.h> > @@ -1055,6 +1056,42 @@ static struct tvp514x_decoder tvp514x_dev = { > > }; > > +static struct tvp514x_platform_data * > +tvp514x_get_pdata(struct i2c_client *client) > +{ > + struct tvp514x_platform_data *pdata = NULL; > + struct v4l2_of_endpoint bus_cfg; > + struct device_node *endpoint; > + unsigned int flags; > + > + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) > + return client->dev.platform_data; > + > + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); > + if (!endpoint) > + goto done; > + Ahh this had to be return NULL I'll respin a new version fixing it. Regards, --Prabhakar Lad
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode 100644 index 0000000..cc09424 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt @@ -0,0 +1,45 @@ +* Texas Instruments TVP514x video decoder + +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip +digital video decoder that digitizes and decodes all popular baseband analog +video formats into digital video component. The tvp514x decoder supports analog- +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM composite and S-video into +component YCbCr. + +Required Properties : +- compatible : value should be either one among the following + (a) "ti,tvp5146" for tvp5146 decoder. + (b) "ti,tvp5146m2" for tvp5146m2 decoder. + (c) "ti,tvp5147" for tvp5147 decoder. + (d) "ti,tvp5147m1" for tvp5147m1 decoder. + +- hsync-active: HSYNC Polarity configuration for endpoint. + +- vsync-active: VSYNC Polarity configuration for endpoint. + +- pclk-sample: Clock polarity of the endpoint. + + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp514x@5c { + compatible = "ti,tvp5146"; + reg = <0x5c>; + + port { + tvp514x_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index 7438e01..803f3b8 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -38,6 +38,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-common.h> +#include <media/v4l2-of.h> #include <media/v4l2-mediabus.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-ctrls.h> @@ -1055,6 +1056,42 @@ static struct tvp514x_decoder tvp514x_dev = { }; +static struct tvp514x_platform_data * +tvp514x_get_pdata(struct i2c_client *client) +{ + struct tvp514x_platform_data *pdata = NULL; + struct v4l2_of_endpoint bus_cfg; + struct device_node *endpoint; + unsigned int flags; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!endpoint) + goto done; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto done; + + v4l2_of_parse_endpoint(endpoint, &bus_cfg); + flags = bus_cfg.bus.parallel.flags; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + pdata->hs_polarity = 1; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + pdata->vs_polarity = 1; + + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + pdata->clk_polarity = 1; + +done: + of_node_put(endpoint); + return pdata; +} + /** * tvp514x_probe() - decoder driver i2c probe handler * @client: i2c driver client device structure @@ -1066,19 +1103,20 @@ static struct tvp514x_decoder tvp514x_dev = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct tvp514x_platform_data *pdata = tvp514x_get_pdata(client); struct tvp514x_decoder *decoder; struct v4l2_subdev *sd; int ret; + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - if (!client->dev.platform_data) { - v4l2_err(client, "No platform data!!\n"); - return -ENODEV; - } - decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); if (!decoder) return -ENOMEM; @@ -1090,7 +1128,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) sizeof(tvp514x_reg_list_default)); /* Copy board specific information here */ - decoder->pdata = client->dev.platform_data; + decoder->pdata = pdata; /** * Fetch platform specific data, and configure the @@ -1230,8 +1268,20 @@ static const struct i2c_device_id tvp514x_id[] = { MODULE_DEVICE_TABLE(i2c, tvp514x_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tvp514x_of_match[] = { + { .compatible = "ti,tvp5146", }, + { .compatible = "ti,tvp5146m2", }, + { .compatible = "ti,tvp5147", }, + { .compatible = "ti,tvp5147m1", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, tvp514x_of_match); +#endif + static struct i2c_driver tvp514x_driver = { .driver = { + .of_match_table = of_match_ptr(tvp514x_of_match), .owner = THIS_MODULE, .name = TVP514X_MODULE_NAME, },