diff mbox

[2/6] ARM: ux500: Don't set plf ocr mask for SD/MMC device

Message ID 1369314830-3727-3-git-send-email-ulf.hansson@stericsson.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ulf Hansson May 23, 2013, 1:13 p.m. UTC 
From: Ulf Hansson <ulf.hansson@linaro.org>

The mmci host driver overrides platform ocr mask when a vmmc regulator
can be used. This is the case for sdi0(SD-card) and for sdi4(eMMC).
Thus it is pointless of specifing these mask and why we do remove them.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 arch/arm/mach-ux500/board-mop500-sdi.c |    2 --
 1 file changed, 2 deletions(-)

Comments

Linus Walleij May 27, 2013, 11:21 a.m. UTC | #1 
On Thu, May 23, 2013 at 3:13 PM, Ulf Hansson <ulf.hansson@stericsson.com> wrote:

> From: Ulf Hansson <ulf.hansson@linaro.org>
>
> The mmci host driver overrides platform ocr mask when a vmmc regulator
> can be used. This is the case for sdi0(SD-card) and for sdi4(eMMC).
> Thus it is pointless of specifing these mask and why we do remove them.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This rids some boot noise as well, thanks!
Patch applied for ux500-core.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index eb9b2de..c0573d2 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -52,7 +52,6 @@  static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 100000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |
 				MMC_CAP_SD_HIGHSPEED |
@@ -180,7 +179,6 @@  static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi4_data = {
-	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 100000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_MMC_HIGHSPEED,