| Message ID | 1369564538-21835-1-git-send-email-mpa@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, May 26, 2013 at 12:35:38PM +0200, Markus Pargmann wrote: > Add devicetree support for imx framebuffer driver. It uses the generic > display bindings and helper functions. > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha
On 12:35 Sun 26 May , Markus Pargmann wrote: > Add devicetree support for imx framebuffer driver. It uses the generic > display bindings and helper functions. > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Applied thanks Best Regards, J. > --- > > Notes: > Changed in v6: > - Rebased onto v3.10-rc2 > - Dropped alpha support patch in this series > > Changed in v5: > - Fix compatible property of the example > - Rename property fsl,bpp to bits-per-pixel > - Add selects for FB_MODE_HELPERS and VIDEOMODE_HELPERS to Kconfig FB_IMX > > Changes in v4: > - Remove eukrea specific dmacr property. > - Add optional dmacr property. If not present, the dmacr reset value is not > changed. > > Changes in v3: > - Fix returncodes of of_read_mode function and print error messages > - Introduce a lower bound check for bits per pixel > - Calculate correct bytes per pixel value before using it for the calculation of > memory size > - Change DT property names > > Changes in v2: > - Removed pwmr register property > - Cleanup of devicetree binding documentation > - Use default values for pwmr and lscr1 > > .../devicetree/bindings/video/fsl,imx-fb.txt | 51 ++++++ > drivers/video/Kconfig | 2 + > drivers/video/imxfb.c | 194 +++++++++++++++++---- > 3 files changed, 212 insertions(+), 35 deletions(-) > create mode 100644 Documentation/devicetree/bindings/video/fsl,imx-fb.txt > > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > new file mode 100644 > index 0000000..46da08d > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > @@ -0,0 +1,51 @@ > +Freescale imx21 Framebuffer > + > +This framebuffer driver supports devices imx1, imx21, imx25, and imx27. > + > +Required properties: > +- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 > +- reg : Should contain 1 register ranges(address and length) > +- interrupts : One interrupt of the fb dev > + > +Required nodes: > +- display: Phandle to a display node as described in > + Documentation/devicetree/bindings/video/display-timing.txt > + Additional, the display node has to define properties: > + - bits-per-pixel: Bits per pixel > + - fsl,pcr: LCDC PCR value > + > +Optional properties: > +- fsl,dmacr: DMA Control Register value. This is optional. By default, the > + register is not modified as recommended by the datasheet. > +- fsl,lscr1: LCDC Sharp Configuration Register value. > + > +Example: > + > + imxfb: fb@10021000 { > + compatible = "fsl,imx21-fb"; > + interrupts = <61>; > + reg = <0x10021000 0x1000>; > + display = <&display0>; > + }; > + > + ... > + > + display0: display0 { > + model = "Primeview-PD050VL1"; > + native-mode = <&timing_disp0>; > + bits-per-pixel = <16>; > + fsl,pcr = <0xf0c88080>; /* non-standard but required */ > + display-timings { > + timing_disp0: 640x480 { > + hactive = <640>; > + vactive = <480>; > + hback-porch = <112>; > + hfront-porch = <36>; > + hsync-len = <32>; > + vback-porch = <33>; > + vfront-porch = <33>; > + vsync-len = <2>; > + clock-frequency = <25000000>; > + }; > + }; > + }; > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index d71d60f..588af1d 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -367,6 +367,8 @@ config FB_IMX > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > + select FB_MODE_HELPERS > + select VIDEOMODE_HELPERS > > config FB_CYBER2000 > tristate "CyberPro 2000/2010/5000 support" > diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c > index 0abf2bf..a2ed71d 100644 > --- a/drivers/video/imxfb.c > +++ b/drivers/video/imxfb.c > @@ -31,6 +31,12 @@ > #include <linux/dma-mapping.h> > #include <linux/io.h> > #include <linux/math64.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > + > +#include <video/of_display_timing.h> > +#include <video/of_videomode.h> > +#include <video/videomode.h> > > #include <linux/platform_data/video-imxfb.h> > > @@ -112,10 +118,11 @@ > #define LCDISR_EOF (1<<1) > #define LCDISR_BOF (1<<0) > > +#define IMXFB_LSCR1_DEFAULT 0x00120300 > + > /* Used fb-mode. Can be set on kernel command line, therefore file-static. */ > static const char *fb_mode; > > - > /* > * These are the bitfields for each > * display depth that we support. > @@ -187,6 +194,19 @@ static struct platform_device_id imxfb_devtype[] = { > }; > MODULE_DEVICE_TABLE(platform, imxfb_devtype); > > +static struct of_device_id imxfb_of_dev_id[] = { > + { > + .compatible = "fsl,imx1-fb", > + .data = &imxfb_devtype[IMX1_FB], > + }, { > + .compatible = "fsl,imx21-fb", > + .data = &imxfb_devtype[IMX21_FB], > + }, { > + /* sentinel */ > + } > +}; > +MODULE_DEVICE_TABLE(of, imxfb_of_dev_id); > + > static inline int is_imx1_fb(struct imxfb_info *fbi) > { > return fbi->devtype == IMX1_FB; > @@ -319,6 +339,9 @@ static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi) > struct imx_fb_videomode *m; > int i; > > + if (!fb_mode) > + return &fbi->mode[0]; > + > for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) { > if (!strcmp(m->mode.name, fb_mode)) > return m; > @@ -474,6 +497,9 @@ static int imxfb_bl_update_status(struct backlight_device *bl) > struct imxfb_info *fbi = bl_get_data(bl); > int brightness = bl->props.brightness; > > + if (!fbi->pwmr) > + return 0; > + > if (bl->props.power != FB_BLANK_UNBLANK) > brightness = 0; > if (bl->props.fb_blank != FB_BLANK_UNBLANK) > @@ -684,10 +710,14 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf > > writel(fbi->pcr, fbi->regs + LCDC_PCR); > #ifndef PWMR_BACKLIGHT_AVAILABLE > - writel(fbi->pwmr, fbi->regs + LCDC_PWMR); > + if (fbi->pwmr) > + writel(fbi->pwmr, fbi->regs + LCDC_PWMR); > #endif > writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); > - writel(fbi->dmacr, fbi->regs + LCDC_DMACR); > + > + /* dmacr = 0 is no valid value, as we need DMA control marks. */ > + if (fbi->dmacr) > + writel(fbi->dmacr, fbi->regs + LCDC_DMACR); > > return 0; > } > @@ -723,13 +753,12 @@ static int imxfb_resume(struct platform_device *dev) > #define imxfb_resume NULL > #endif > > -static int __init imxfb_init_fbinfo(struct platform_device *pdev) > +static int imxfb_init_fbinfo(struct platform_device *pdev) > { > struct imx_fb_platform_data *pdata = pdev->dev.platform_data; > struct fb_info *info = dev_get_drvdata(&pdev->dev); > struct imxfb_info *fbi = info->par; > - struct imx_fb_videomode *m; > - int i; > + struct device_node *np; > > pr_debug("%s\n",__func__); > > @@ -760,41 +789,95 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) > info->fbops = &imxfb_ops; > info->flags = FBINFO_FLAG_DEFAULT | > FBINFO_READS_FAST; > - info->var.grayscale = pdata->cmap_greyscale; > - fbi->cmap_inverse = pdata->cmap_inverse; > - fbi->cmap_static = pdata->cmap_static; > - fbi->lscr1 = pdata->lscr1; > - fbi->dmacr = pdata->dmacr; > - fbi->pwmr = pdata->pwmr; > - fbi->lcd_power = pdata->lcd_power; > - fbi->backlight_power = pdata->backlight_power; > - > - for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++) > - info->fix.smem_len = max_t(size_t, info->fix.smem_len, > - m->mode.xres * m->mode.yres * m->bpp / 8); > + if (pdata) { > + info->var.grayscale = pdata->cmap_greyscale; > + fbi->cmap_inverse = pdata->cmap_inverse; > + fbi->cmap_static = pdata->cmap_static; > + fbi->lscr1 = pdata->lscr1; > + fbi->dmacr = pdata->dmacr; > + fbi->pwmr = pdata->pwmr; > + fbi->lcd_power = pdata->lcd_power; > + fbi->backlight_power = pdata->backlight_power; > + } else { > + np = pdev->dev.of_node; > + info->var.grayscale = of_property_read_bool(np, > + "cmap-greyscale"); > + fbi->cmap_inverse = of_property_read_bool(np, "cmap-inverse"); > + fbi->cmap_static = of_property_read_bool(np, "cmap-static"); > + > + fbi->lscr1 = IMXFB_LSCR1_DEFAULT; > + of_property_read_u32(np, "fsl,lscr1", &fbi->lscr1); > + > + of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr); > + > + /* These two function pointers could be used by some specific > + * platforms. */ > + fbi->lcd_power = NULL; > + fbi->backlight_power = NULL; > + } > + > + return 0; > +} > + > +static int imxfb_of_read_mode(struct device *dev, struct device_node *np, > + struct imx_fb_videomode *imxfb_mode) > +{ > + int ret; > + struct fb_videomode *of_mode = &imxfb_mode->mode; > + u32 bpp; > + u32 pcr; > + > + ret = of_property_read_string(np, "model", &of_mode->name); > + if (ret) > + of_mode->name = NULL; > + > + ret = of_get_fb_videomode(np, of_mode, OF_USE_NATIVE_MODE); > + if (ret) { > + dev_err(dev, "Failed to get videomode from DT\n"); > + return ret; > + } > + > + ret = of_property_read_u32(np, "bits-per-pixel", &bpp); > + ret |= of_property_read_u32(np, "fsl,pcr", &pcr); > + > + if (ret) { > + dev_err(dev, "Failed to read bpp and pcr from DT\n"); > + return -EINVAL; > + } > + > + if (bpp < 1 || bpp > 255) { > + dev_err(dev, "Bits per pixel have to be between 1 and 255\n"); > + return -EINVAL; > + } > + > + imxfb_mode->bpp = bpp; > + imxfb_mode->pcr = pcr; > > return 0; > } > > -static int __init imxfb_probe(struct platform_device *pdev) > +static int imxfb_probe(struct platform_device *pdev) > { > struct imxfb_info *fbi; > struct fb_info *info; > struct imx_fb_platform_data *pdata; > struct resource *res; > + struct imx_fb_videomode *m; > + const struct of_device_id *of_id; > int ret, i; > + int bytes_per_pixel; > > dev_info(&pdev->dev, "i.MX Framebuffer driver\n"); > > + of_id = of_match_device(imxfb_of_dev_id, &pdev->dev); > + if (of_id) > + pdev->id_entry = of_id->data; > + > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > if (!res) > return -ENODEV; > > pdata = pdev->dev.platform_data; > - if (!pdata) { > - dev_err(&pdev->dev,"No platform_data available\n"); > - return -ENOMEM; > - } > > info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); > if (!info) > @@ -802,15 +885,55 @@ static int __init imxfb_probe(struct platform_device *pdev) > > fbi = info->par; > > - if (!fb_mode) > - fb_mode = pdata->mode[0].mode.name; > - > platform_set_drvdata(pdev, info); > > ret = imxfb_init_fbinfo(pdev); > if (ret < 0) > goto failed_init; > > + if (pdata) { > + if (!fb_mode) > + fb_mode = pdata->mode[0].mode.name; > + > + fbi->mode = pdata->mode; > + fbi->num_modes = pdata->num_modes; > + } else { > + struct device_node *display_np; > + fb_mode = NULL; > + > + display_np = of_parse_phandle(pdev->dev.of_node, "display", 0); > + if (!display_np) { > + dev_err(&pdev->dev, "No display defined in devicetree\n"); > + ret = -EINVAL; > + goto failed_of_parse; > + } > + > + /* > + * imxfb does not support more modes, we choose only the native > + * mode. > + */ > + fbi->num_modes = 1; > + > + fbi->mode = devm_kzalloc(&pdev->dev, > + sizeof(struct imx_fb_videomode), GFP_KERNEL); > + if (!fbi->mode) { > + ret = -ENOMEM; > + goto failed_of_parse; > + } > + > + ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode); > + if (ret) > + goto failed_of_parse; > + } > + > + /* Calculate maximum bytes used per pixel. In most cases this should > + * be the same as m->bpp/8 */ > + m = &fbi->mode[0]; > + bytes_per_pixel = (m->bpp + 7) / 8; > + for (i = 0; i < fbi->num_modes; i++, m++) > + info->fix.smem_len = max_t(size_t, info->fix.smem_len, > + m->mode.xres * m->mode.yres * bytes_per_pixel); > + > res = request_mem_region(res->start, resource_size(res), > DRIVER_NAME); > if (!res) { > @@ -843,7 +966,8 @@ static int __init imxfb_probe(struct platform_device *pdev) > goto failed_ioremap; > } > > - if (!pdata->fixed_screen_cpu) { > + /* Seems not being used by anyone, so no support for oftree */ > + if (!pdata || !pdata->fixed_screen_cpu) { > fbi->map_size = PAGE_ALIGN(info->fix.smem_len); > fbi->map_cpu = dma_alloc_writecombine(&pdev->dev, > fbi->map_size, &fbi->map_dma, GFP_KERNEL); > @@ -868,18 +992,16 @@ static int __init imxfb_probe(struct platform_device *pdev) > info->fix.smem_start = fbi->screen_dma; > } > > - if (pdata->init) { > + if (pdata && pdata->init) { > ret = pdata->init(fbi->pdev); > if (ret) > goto failed_platform_init; > } > > - fbi->mode = pdata->mode; > - fbi->num_modes = pdata->num_modes; > > INIT_LIST_HEAD(&info->modelist); > - for (i = 0; i < pdata->num_modes; i++) > - fb_add_videomode(&pdata->mode[i].mode, &info->modelist); > + for (i = 0; i < fbi->num_modes; i++) > + fb_add_videomode(&fbi->mode[i].mode, &info->modelist); > > /* > * This makes sure that our colour bitfield > @@ -909,10 +1031,10 @@ static int __init imxfb_probe(struct platform_device *pdev) > failed_register: > fb_dealloc_cmap(&info->cmap); > failed_cmap: > - if (pdata->exit) > + if (pdata && pdata->exit) > pdata->exit(fbi->pdev); > failed_platform_init: > - if (!pdata->fixed_screen_cpu) > + if (pdata && !pdata->fixed_screen_cpu) > dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, > fbi->map_dma); > failed_map: > @@ -921,6 +1043,7 @@ failed_ioremap: > failed_getclock: > release_mem_region(res->start, resource_size(res)); > failed_req: > +failed_of_parse: > kfree(info->pseudo_palette); > failed_init: > platform_set_drvdata(pdev, NULL); > @@ -945,7 +1068,7 @@ static int imxfb_remove(struct platform_device *pdev) > unregister_framebuffer(info); > > pdata = pdev->dev.platform_data; > - if (pdata->exit) > + if (pdata && pdata->exit) > pdata->exit(fbi->pdev); > > fb_dealloc_cmap(&info->cmap); > @@ -974,6 +1097,7 @@ static struct platform_driver imxfb_driver = { > .shutdown = imxfb_shutdown, > .driver = { > .name = DRIVER_NAME, > + .of_match_table = imxfb_of_dev_id, > }, > .id_table = imxfb_devtype, > }; > -- > 1.8.2.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jean-Christophe, On Tue, May 28, 2013 at 8:09 AM, Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote: > On 12:35 Sun 26 May , Markus Pargmann wrote: >> Add devicetree support for imx framebuffer driver. It uses the generic >> display bindings and helper functions. >> >> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> >> Cc: Fabio Estevam <festevam@gmail.com> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > > Applied thanks Still don't see this patch in linux-next. Could you please check? -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09:09 Fri 05 Jul , Fabio Estevam wrote: > Hi Jean-Christophe, > > On Tue, May 28, 2013 at 8:09 AM, Jean-Christophe PLAGNIOL-VILLARD > <plagnioj@jcrosoft.com> wrote: > > On 12:35 Sun 26 May , Markus Pargmann wrote: > >> Add devicetree support for imx framebuffer driver. It uses the generic > >> display bindings and helper functions. > >> > >> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > >> Cc: Fabio Estevam <festevam@gmail.com> > >> Cc: Mark Rutland <mark.rutland@arm.com> > >> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > > > > Applied thanks > > Still don't see this patch in linux-next. Could you please check? in the pull to Linus Best Regards, J. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt new file mode 100644 index 0000000..46da08d --- /dev/null +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt @@ -0,0 +1,51 @@ +Freescale imx21 Framebuffer + +This framebuffer driver supports devices imx1, imx21, imx25, and imx27. + +Required properties: +- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 +- reg : Should contain 1 register ranges(address and length) +- interrupts : One interrupt of the fb dev + +Required nodes: +- display: Phandle to a display node as described in + Documentation/devicetree/bindings/video/display-timing.txt + Additional, the display node has to define properties: + - bits-per-pixel: Bits per pixel + - fsl,pcr: LCDC PCR value + +Optional properties: +- fsl,dmacr: DMA Control Register value. This is optional. By default, the + register is not modified as recommended by the datasheet. +- fsl,lscr1: LCDC Sharp Configuration Register value. + +Example: + + imxfb: fb@10021000 { + compatible = "fsl,imx21-fb"; + interrupts = <61>; + reg = <0x10021000 0x1000>; + display = <&display0>; + }; + + ... + + display0: display0 { + model = "Primeview-PD050VL1"; + native-mode = <&timing_disp0>; + bits-per-pixel = <16>; + fsl,pcr = <0xf0c88080>; /* non-standard but required */ + display-timings { + timing_disp0: 640x480 { + hactive = <640>; + vactive = <480>; + hback-porch = <112>; + hfront-porch = <36>; + hsync-len = <32>; + vback-porch = <33>; + vfront-porch = <33>; + vsync-len = <2>; + clock-frequency = <25000000>; + }; + }; + }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d71d60f..588af1d 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -367,6 +367,8 @@ config FB_IMX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_MODE_HELPERS + select VIDEOMODE_HELPERS config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 0abf2bf..a2ed71d 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -31,6 +31,12 @@ #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/math64.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include <video/of_display_timing.h> +#include <video/of_videomode.h> +#include <video/videomode.h> #include <linux/platform_data/video-imxfb.h> @@ -112,10 +118,11 @@ #define LCDISR_EOF (1<<1) #define LCDISR_BOF (1<<0) +#define IMXFB_LSCR1_DEFAULT 0x00120300 + /* Used fb-mode. Can be set on kernel command line, therefore file-static. */ static const char *fb_mode; - /* * These are the bitfields for each * display depth that we support. @@ -187,6 +194,19 @@ static struct platform_device_id imxfb_devtype[] = { }; MODULE_DEVICE_TABLE(platform, imxfb_devtype); +static struct of_device_id imxfb_of_dev_id[] = { + { + .compatible = "fsl,imx1-fb", + .data = &imxfb_devtype[IMX1_FB], + }, { + .compatible = "fsl,imx21-fb", + .data = &imxfb_devtype[IMX21_FB], + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, imxfb_of_dev_id); + static inline int is_imx1_fb(struct imxfb_info *fbi) { return fbi->devtype == IMX1_FB; @@ -319,6 +339,9 @@ static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi) struct imx_fb_videomode *m; int i; + if (!fb_mode) + return &fbi->mode[0]; + for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) { if (!strcmp(m->mode.name, fb_mode)) return m; @@ -474,6 +497,9 @@ static int imxfb_bl_update_status(struct backlight_device *bl) struct imxfb_info *fbi = bl_get_data(bl); int brightness = bl->props.brightness; + if (!fbi->pwmr) + return 0; + if (bl->props.power != FB_BLANK_UNBLANK) brightness = 0; if (bl->props.fb_blank != FB_BLANK_UNBLANK) @@ -684,10 +710,14 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf writel(fbi->pcr, fbi->regs + LCDC_PCR); #ifndef PWMR_BACKLIGHT_AVAILABLE - writel(fbi->pwmr, fbi->regs + LCDC_PWMR); + if (fbi->pwmr) + writel(fbi->pwmr, fbi->regs + LCDC_PWMR); #endif writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); - writel(fbi->dmacr, fbi->regs + LCDC_DMACR); + + /* dmacr = 0 is no valid value, as we need DMA control marks. */ + if (fbi->dmacr) + writel(fbi->dmacr, fbi->regs + LCDC_DMACR); return 0; } @@ -723,13 +753,12 @@ static int imxfb_resume(struct platform_device *dev) #define imxfb_resume NULL #endif -static int __init imxfb_init_fbinfo(struct platform_device *pdev) +static int imxfb_init_fbinfo(struct platform_device *pdev) { struct imx_fb_platform_data *pdata = pdev->dev.platform_data; struct fb_info *info = dev_get_drvdata(&pdev->dev); struct imxfb_info *fbi = info->par; - struct imx_fb_videomode *m; - int i; + struct device_node *np; pr_debug("%s\n",__func__); @@ -760,41 +789,95 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) info->fbops = &imxfb_ops; info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST; - info->var.grayscale = pdata->cmap_greyscale; - fbi->cmap_inverse = pdata->cmap_inverse; - fbi->cmap_static = pdata->cmap_static; - fbi->lscr1 = pdata->lscr1; - fbi->dmacr = pdata->dmacr; - fbi->pwmr = pdata->pwmr; - fbi->lcd_power = pdata->lcd_power; - fbi->backlight_power = pdata->backlight_power; - - for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++) - info->fix.smem_len = max_t(size_t, info->fix.smem_len, - m->mode.xres * m->mode.yres * m->bpp / 8); + if (pdata) { + info->var.grayscale = pdata->cmap_greyscale; + fbi->cmap_inverse = pdata->cmap_inverse; + fbi->cmap_static = pdata->cmap_static; + fbi->lscr1 = pdata->lscr1; + fbi->dmacr = pdata->dmacr; + fbi->pwmr = pdata->pwmr; + fbi->lcd_power = pdata->lcd_power; + fbi->backlight_power = pdata->backlight_power; + } else { + np = pdev->dev.of_node; + info->var.grayscale = of_property_read_bool(np, + "cmap-greyscale"); + fbi->cmap_inverse = of_property_read_bool(np, "cmap-inverse"); + fbi->cmap_static = of_property_read_bool(np, "cmap-static"); + + fbi->lscr1 = IMXFB_LSCR1_DEFAULT; + of_property_read_u32(np, "fsl,lscr1", &fbi->lscr1); + + of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr); + + /* These two function pointers could be used by some specific + * platforms. */ + fbi->lcd_power = NULL; + fbi->backlight_power = NULL; + } + + return 0; +} + +static int imxfb_of_read_mode(struct device *dev, struct device_node *np, + struct imx_fb_videomode *imxfb_mode) +{ + int ret; + struct fb_videomode *of_mode = &imxfb_mode->mode; + u32 bpp; + u32 pcr; + + ret = of_property_read_string(np, "model", &of_mode->name); + if (ret) + of_mode->name = NULL; + + ret = of_get_fb_videomode(np, of_mode, OF_USE_NATIVE_MODE); + if (ret) { + dev_err(dev, "Failed to get videomode from DT\n"); + return ret; + } + + ret = of_property_read_u32(np, "bits-per-pixel", &bpp); + ret |= of_property_read_u32(np, "fsl,pcr", &pcr); + + if (ret) { + dev_err(dev, "Failed to read bpp and pcr from DT\n"); + return -EINVAL; + } + + if (bpp < 1 || bpp > 255) { + dev_err(dev, "Bits per pixel have to be between 1 and 255\n"); + return -EINVAL; + } + + imxfb_mode->bpp = bpp; + imxfb_mode->pcr = pcr; return 0; } -static int __init imxfb_probe(struct platform_device *pdev) +static int imxfb_probe(struct platform_device *pdev) { struct imxfb_info *fbi; struct fb_info *info; struct imx_fb_platform_data *pdata; struct resource *res; + struct imx_fb_videomode *m; + const struct of_device_id *of_id; int ret, i; + int bytes_per_pixel; dev_info(&pdev->dev, "i.MX Framebuffer driver\n"); + of_id = of_match_device(imxfb_of_dev_id, &pdev->dev); + if (of_id) + pdev->id_entry = of_id->data; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev,"No platform_data available\n"); - return -ENOMEM; - } info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); if (!info) @@ -802,15 +885,55 @@ static int __init imxfb_probe(struct platform_device *pdev) fbi = info->par; - if (!fb_mode) - fb_mode = pdata->mode[0].mode.name; - platform_set_drvdata(pdev, info); ret = imxfb_init_fbinfo(pdev); if (ret < 0) goto failed_init; + if (pdata) { + if (!fb_mode) + fb_mode = pdata->mode[0].mode.name; + + fbi->mode = pdata->mode; + fbi->num_modes = pdata->num_modes; + } else { + struct device_node *display_np; + fb_mode = NULL; + + display_np = of_parse_phandle(pdev->dev.of_node, "display", 0); + if (!display_np) { + dev_err(&pdev->dev, "No display defined in devicetree\n"); + ret = -EINVAL; + goto failed_of_parse; + } + + /* + * imxfb does not support more modes, we choose only the native + * mode. + */ + fbi->num_modes = 1; + + fbi->mode = devm_kzalloc(&pdev->dev, + sizeof(struct imx_fb_videomode), GFP_KERNEL); + if (!fbi->mode) { + ret = -ENOMEM; + goto failed_of_parse; + } + + ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode); + if (ret) + goto failed_of_parse; + } + + /* Calculate maximum bytes used per pixel. In most cases this should + * be the same as m->bpp/8 */ + m = &fbi->mode[0]; + bytes_per_pixel = (m->bpp + 7) / 8; + for (i = 0; i < fbi->num_modes; i++, m++) + info->fix.smem_len = max_t(size_t, info->fix.smem_len, + m->mode.xres * m->mode.yres * bytes_per_pixel); + res = request_mem_region(res->start, resource_size(res), DRIVER_NAME); if (!res) { @@ -843,7 +966,8 @@ static int __init imxfb_probe(struct platform_device *pdev) goto failed_ioremap; } - if (!pdata->fixed_screen_cpu) { + /* Seems not being used by anyone, so no support for oftree */ + if (!pdata || !pdata->fixed_screen_cpu) { fbi->map_size = PAGE_ALIGN(info->fix.smem_len); fbi->map_cpu = dma_alloc_writecombine(&pdev->dev, fbi->map_size, &fbi->map_dma, GFP_KERNEL); @@ -868,18 +992,16 @@ static int __init imxfb_probe(struct platform_device *pdev) info->fix.smem_start = fbi->screen_dma; } - if (pdata->init) { + if (pdata && pdata->init) { ret = pdata->init(fbi->pdev); if (ret) goto failed_platform_init; } - fbi->mode = pdata->mode; - fbi->num_modes = pdata->num_modes; INIT_LIST_HEAD(&info->modelist); - for (i = 0; i < pdata->num_modes; i++) - fb_add_videomode(&pdata->mode[i].mode, &info->modelist); + for (i = 0; i < fbi->num_modes; i++) + fb_add_videomode(&fbi->mode[i].mode, &info->modelist); /* * This makes sure that our colour bitfield @@ -909,10 +1031,10 @@ static int __init imxfb_probe(struct platform_device *pdev) failed_register: fb_dealloc_cmap(&info->cmap); failed_cmap: - if (pdata->exit) + if (pdata && pdata->exit) pdata->exit(fbi->pdev); failed_platform_init: - if (!pdata->fixed_screen_cpu) + if (pdata && !pdata->fixed_screen_cpu) dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, fbi->map_dma); failed_map: @@ -921,6 +1043,7 @@ failed_ioremap: failed_getclock: release_mem_region(res->start, resource_size(res)); failed_req: +failed_of_parse: kfree(info->pseudo_palette); failed_init: platform_set_drvdata(pdev, NULL); @@ -945,7 +1068,7 @@ static int imxfb_remove(struct platform_device *pdev) unregister_framebuffer(info); pdata = pdev->dev.platform_data; - if (pdata->exit) + if (pdata && pdata->exit) pdata->exit(fbi->pdev); fb_dealloc_cmap(&info->cmap); @@ -974,6 +1097,7 @@ static struct platform_driver imxfb_driver = { .shutdown = imxfb_shutdown, .driver = { .name = DRIVER_NAME, + .of_match_table = imxfb_of_dev_id, }, .id_table = imxfb_devtype, };