| Message ID | 1369840066-20357-8-git-send-email-eduardo.valentin@ti.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Zhang Rui |
| Headers | show |
Hi Eduardo, On 05/29/2013 08:37 PM, Eduardo Valentin wrote: > Update documentation by adding an example for DRA752 on DT description. > > Cc: linux-pm@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: Grant Likely <grant.likely@linaro.org> > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Rob Landley <rob@landley.net> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: J Keerthy <j-keerthy@ti.com> > Cc: devicetree-discuss@lists.ozlabs.org > Cc: linux-doc@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> > --- > Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt > index 1629652..1953b33 100644 > --- a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt > @@ -59,3 +59,15 @@ bandgap { > compatible = "ti,omap5430-bandgap"; > interrupts = <0 126 4>; /* talert */ > }; > + > +DRA752: > +bandgap { > + reg = <0x4a0021e0 0xc > + 0x4a00232c 0xc > + 0x4a002380 0x2c > + 0x4a0023C0 0x3c > + 0x4a002564 0x8 > + 0x4a002574 0x50>; > + compatible = "ti,dra752-bandgap"; The general convention seems to be keeping it as dra7xx or dra7. Why add specific nodes like dra752? We can always reuse for forthcoming dra7 processors if the same address mapping and IP is retained right? > + interrupts = <0 126 4>; /* talert */ The TRM does not have any term called talert. Can the comment be /* thermal_alert */ so it is easy to figure out what it is. > +}; Regards, Keerthy -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 30-05-2013 04:56, keerthy wrote: > Hi Eduardo, > > On 05/29/2013 08:37 PM, Eduardo Valentin wrote: > >> Update documentation by adding an example for DRA752 on DT description. >> >> Cc: linux-pm@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> Cc: Grant Likely <grant.likely@linaro.org> >> Cc: Rob Herring <rob.herring@calxeda.com> >> Cc: Rob Landley <rob@landley.net> >> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >> Cc: Zhang Rui <rui.zhang@intel.com> >> Cc: J Keerthy <j-keerthy@ti.com> >> Cc: devicetree-discuss@lists.ozlabs.org >> Cc: linux-doc@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> >> --- >> Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt >> index 1629652..1953b33 100644 >> --- a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt >> +++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt >> @@ -59,3 +59,15 @@ bandgap { >> compatible = "ti,omap5430-bandgap"; >> interrupts = <0 126 4>; /* talert */ >> }; >> + >> +DRA752: >> +bandgap { >> + reg = <0x4a0021e0 0xc >> + 0x4a00232c 0xc >> + 0x4a002380 0x2c >> + 0x4a0023C0 0x3c >> + 0x4a002564 0x8 >> + 0x4a002574 0x50>; >> + compatible = "ti,dra752-bandgap"; > > > The general convention seems to be keeping it as dra7xx or dra7. > Why add specific nodes like dra752? We can always reuse for > forthcoming dra7 processors if the same address mapping and IP > is retained right? > >> In fact, I must agree with you that using a node such as dra752 is restrictive. And I must also admit my original plan was to use dra7xx naming convention. Not only on DT nodes, but in driver source code symbols too. Well, this is about re-usability, right? However, I took a step back and thought about the bandgap IP history. Take that in mind, just look to the source code. We never succeed to reuse nodes fully and it is because bandgap IPs do change from chip version to chip version. That is also understandable as every chip has its own thermal peculiarities. For instance, we do not have a omap4xxx node because each OMAP4 chip has a different bandgap IP, with different features. I really would like to use a dra7xxx node, but that would contradict the IP history :-). If we are trying to avoid patching the driver in the future, I would say it is more likely to have a patch for another dra7 chip with specifics different from the current one than having a patch reusing the existing dra752 node. This statement is obviously based on driver and IP history (I might be wrong of course and the IP could actually have reached a development stabilization point). + interrupts = <0 126 4>; /* talert */ > > > The TRM does not have any term called talert. Can the comment > be /* thermal_alert */ so it is easy to figure out what it is. > Indeed, TRM does not, in fact! But the TI thermal engineering community have coined this term and I think it is quite common used (within that community) and if you look to the driver code too, it is all over. I believe there is no doubt that talert stands for thermal alert. The driver code does have documentation about that. >> +}; > > > Regards, > Keerthy > >
diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt index 1629652..1953b33 100644 --- a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt +++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt @@ -59,3 +59,15 @@ bandgap { compatible = "ti,omap5430-bandgap"; interrupts = <0 126 4>; /* talert */ }; + +DRA752: +bandgap { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c + 0x4a002564 0x8 + 0x4a002574 0x50>; + compatible = "ti,dra752-bandgap"; + interrupts = <0 126 4>; /* talert */ +};
Update documentation by adding an example for DRA752 on DT description. Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> --- Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+)