diff mbox

[3/5] ARM: ux500: Add DT regulators for ab8500-codec

Message ID 1369920465-13905-4-git-send-email-fabio.baltieri@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Fabio Baltieri May 30, 2013, 1:27 p.m. UTC 
Add regulator DT bindings for the ab8500-codec driver.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Linus Walleij June 4, 2013, 9:01 a.m. UTC | #1 
On Thu, May 30, 2013 at 3:27 PM, Fabio Baltieri
<fabio.baltieri@linaro.org> wrote:

> Add regulator DT bindings for the ab8500-codec driver.
>
> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>

Patch applied to my ux500-devicetree branch.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index d0b6e32..8e14042 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -410,6 +410,11 @@ 
 				codec: ab8500-codec {
 					compatible = "stericsson,ab8500-codec";
 
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};