| Message ID | 1371072317-15030-3-git-send-email-santosh.shilimkar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, More little nits below. On Wed, Jun 12, 2013 at 05:25:16PM -0400, Santosh Shilimkar wrote: > Texas Instruments Keystone family of multi-core devices are > based on ARM Cortex A15. Patch adds basic definitions for a > new Keystone sub-architecture in ARM. > > The TCI66xxK2H Communications Infrastructure Keystone SoCs > are member of the C66x family based on TI's new KeyStone 2 > multi-core SoC Architecture designed specifically for high > performance wireless and networking infrastructure applications. > The SOCs contains many subsystems like Cortex A15 ARM CorePacs, > C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, > IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers > and queue based communication systems. > > Cc: Olof Johansson <olof@lixom.net> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: arm@kernel.org > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > --- > arch/arm/Kconfig | 3 + > arch/arm/Kconfig.debug | 16 ++++ > arch/arm/Makefile | 1 + > arch/arm/configs/keystone_defconfig | 157 ++++++++++++++++++++++++++++++++++ > arch/arm/include/debug/keystone.S | 43 ++++++++++ > arch/arm/mach-keystone/Kconfig | 14 +++ > arch/arm/mach-keystone/Makefile | 1 + > arch/arm/mach-keystone/Makefile.boot | 1 + > arch/arm/mach-keystone/keystone.c | 73 ++++++++++++++++ > 9 files changed, 309 insertions(+) > create mode 100644 arch/arm/configs/keystone_defconfig > create mode 100644 arch/arm/include/debug/keystone.S > create mode 100644 arch/arm/mach-keystone/Kconfig > create mode 100644 arch/arm/mach-keystone/Makefile > create mode 100644 arch/arm/mach-keystone/Makefile.boot > create mode 100644 arch/arm/mach-keystone/keystone.c > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 49d993c..37fe64c 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -948,6 +948,8 @@ source "arch/arm/mach-iop13xx/Kconfig" > > source "arch/arm/mach-ixp4xx/Kconfig" > > +source "arch/arm/mach-keystone/Kconfig" > + > source "arch/arm/mach-kirkwood/Kconfig" > > source "arch/arm/mach-ks8695/Kconfig" > @@ -1564,6 +1566,7 @@ config ARCH_NR_GPIO > default 352 if ARCH_VT8500 > default 288 if ARCH_SUNXI > default 264 if MACH_H4700 > + default 512 if ARCH_KEYSTONE These are ordered in falling order, so please insert higher. > default 0 > help > Maximum number of GPIOs in the system. > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 1d41908..62e7f95 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -251,6 +251,20 @@ choice > Say Y here if you want kernel low-level debugging support > on i.MX6Q/DL. > > + config DEBUG_KEYSTONE_UART0 > + bool "Kernel low-level debugging on KEYSTONE2 using UART0" > + depends on ARCH_KEYSTONE > + help > + Say Y here if you want the debug print routines to direct > + their output to UART0 serial port on KEYSTONE2 devices. > + > + config DEBUG_KEYSTONE_UART1 > + bool "Kernel low-level debugging on KEYSTONE2 using UART1" > + depends on ARCH_KEYSTONE > + help > + Say Y here if you want the debug print routines to direct > + their output to UART1 serial port on KEYSTONE2 devices. > + > config DEBUG_MMP_UART2 > bool "Kernel low-level debugging message via MMP UART2" > depends on ARCH_MMP > @@ -632,6 +646,8 @@ config DEBUG_LL_INCLUDE > DEBUG_IMX51_UART || \ > DEBUG_IMX53_UART ||\ > DEBUG_IMX6Q_UART > + default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \ > + DEBUG_KEYSTONE_UART1 > default "debug/mvebu.S" if DEBUG_MVEBU_UART > default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART > default "debug/nomadik.S" if DEBUG_NOMADIK_UART > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 1ba358b..a1c9a78 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -194,6 +194,7 @@ machine-$(CONFIG_PLAT_SPEAR) += spear > machine-$(CONFIG_ARCH_VIRT) += virt > machine-$(CONFIG_ARCH_ZYNQ) += zynq > machine-$(CONFIG_ARCH_SUNXI) += sunxi > +machine-$(CONFIG_ARCH_KEYSTONE) += keystone > > # Platform directory name. This list is sorted alphanumerically > # by CONFIG_* macro name. > diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig > new file mode 100644 > index 0000000..62e968c > --- /dev/null > +++ b/arch/arm/configs/keystone_defconfig > @@ -0,0 +1,157 @@ > +# CONFIG_SWAP is not set > +CONFIG_POSIX_MQUEUE=y > +CONFIG_HIGH_RES_TIMERS=y > +CONFIG_IKCONFIG=y > +CONFIG_IKCONFIG_PROC=y > +CONFIG_LOG_BUF_SHIFT=14 > +CONFIG_BLK_DEV_INITRD=y > +CONFIG_SYSCTL_SYSCALL=y > +CONFIG_KALLSYMS_ALL=y > +# CONFIG_ELF_CORE is not set > +# CONFIG_BASE_FULL is not set > +CONFIG_EMBEDDED=y > +CONFIG_PROFILING=y > +CONFIG_OPROFILE=y > +CONFIG_KPROBES=y > +CONFIG_MODULES=y > +CONFIG_MODULE_FORCE_LOAD=y > +CONFIG_MODULE_UNLOAD=y > +CONFIG_MODULE_FORCE_UNLOAD=y > +CONFIG_MODVERSIONS=y > +CONFIG_ARCH_KEYSTONE=y > +CONFIG_ARM_LPAE=y > +CONFIG_SMP=y > +CONFIG_PREEMPT=y > +CONFIG_AEABI=y > +CONFIG_HIGHMEM=y > +CONFIG_VFP=y > +CONFIG_NEON=y > +# CONFIG_SUSPEND is not set > +CONFIG_PM_RUNTIME=y > +CONFIG_NET=y > +CONFIG_PACKET=y > +CONFIG_UNIX=y > +CONFIG_UNIX_DIAG=y > +CONFIG_XFRM_USER=y > +CONFIG_XFRM_SUB_POLICY=y > +CONFIG_XFRM_STATISTICS=y > +CONFIG_NET_KEY=y > +CONFIG_NET_KEY_MIGRATE=y > +CONFIG_INET=y > +CONFIG_IP_MULTICAST=y > +CONFIG_IP_ADVANCED_ROUTER=y > +CONFIG_IP_MULTIPLE_TABLES=y > +CONFIG_IP_ROUTE_MULTIPATH=y > +CONFIG_IP_ROUTE_VERBOSE=y > +CONFIG_IP_PNP=y > +CONFIG_IP_PNP_DHCP=y > +CONFIG_IP_PNP_BOOTP=y > +CONFIG_NET_IPIP=y > +CONFIG_NET_IPGRE_DEMUX=y > +CONFIG_NET_IPGRE=y > +CONFIG_IP_MROUTE=y > +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y > +CONFIG_IP_PIMSM_V2=y > +CONFIG_INET_AH=y > +CONFIG_INET_IPCOMP=y > +CONFIG_IPV6=y > +CONFIG_INET6_XFRM_MODE_TRANSPORT=m > +CONFIG_INET6_XFRM_MODE_TUNNEL=m > +CONFIG_INET6_XFRM_MODE_BEET=m > +CONFIG_IPV6_SIT=m > +CONFIG_IPV6_MULTIPLE_TABLES=y > +CONFIG_IPV6_SUBTREES=y > +CONFIG_IPV6_MROUTE=y > +CONFIG_IPV6_PIMSM_V2=y > +CONFIG_NETFILTER=y > +CONFIG_NF_CONNTRACK=y > +CONFIG_NF_CT_NETLINK=y > +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y > +CONFIG_NETFILTER_XT_TARGET_CONNMARK=y > +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y > +CONFIG_NETFILTER_XT_TARGET_MARK=y > +CONFIG_NETFILTER_XT_MATCH_COMMENT=y > +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y > +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y > +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y > +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y > +CONFIG_NETFILTER_XT_MATCH_CPU=y > +CONFIG_NETFILTER_XT_MATCH_IPRANGE=y > +CONFIG_NETFILTER_XT_MATCH_LENGTH=y > +CONFIG_NETFILTER_XT_MATCH_MAC=y > +CONFIG_NETFILTER_XT_MATCH_MARK=y > +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y > +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y > +CONFIG_NETFILTER_XT_MATCH_STATE=y > +CONFIG_NF_CONNTRACK_IPV4=y > +CONFIG_IP_NF_IPTABLES=y > +CONFIG_IP_NF_MATCH_AH=y > +CONFIG_IP_NF_MATCH_ECN=y > +CONFIG_IP_NF_MATCH_TTL=y > +CONFIG_IP_NF_FILTER=y > +CONFIG_IP_NF_TARGET_REJECT=y > +CONFIG_IP_NF_TARGET_ULOG=y > +CONFIG_IP_NF_MANGLE=y > +CONFIG_IP_NF_TARGET_CLUSTERIP=y > +CONFIG_IP_NF_TARGET_ECN=y > +CONFIG_IP_NF_TARGET_TTL=y > +CONFIG_IP_NF_RAW=y > +CONFIG_IP_NF_ARPTABLES=y > +CONFIG_IP_NF_ARPFILTER=y > +CONFIG_IP_NF_ARP_MANGLE=y > +CONFIG_IP6_NF_IPTABLES=m > +CONFIG_IP_SCTP=y > +CONFIG_VLAN_8021Q=y > +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > +CONFIG_CMA=y > +CONFIG_MTD=y > +CONFIG_MTD_CMDLINE_PARTS=y > +CONFIG_MTD_BLOCK=y > +CONFIG_MTD_PLATRAM=y > +CONFIG_MTD_M25P80=y > +CONFIG_MTD_NAND=y > +CONFIG_MTD_UBI=y > +CONFIG_PROC_DEVICETREE=y > +CONFIG_BLK_DEV_LOOP=y > +CONFIG_EEPROM_AT24=y > +CONFIG_NETDEVICES=y > +CONFIG_SERIAL_8250=y > +CONFIG_SERIAL_8250_CONSOLE=y > +CONFIG_SERIAL_OF_PLATFORM=y > +# CONFIG_HW_RANDOM is not set > +CONFIG_I2C=y > +# CONFIG_I2C_COMPAT is not set > +CONFIG_I2C_CHARDEV=y > +CONFIG_SPI=y > +CONFIG_SPI_SPIDEV=y > +# CONFIG_HWMON is not set > +CONFIG_WATCHDOG=y > +# CONFIG_USB_SUPPORT is not set > +CONFIG_DMADEVICES=y > +CONFIG_COMMON_CLK_DEBUG=y > +CONFIG_MEMORY=y > +CONFIG_TMPFS=y > +CONFIG_JFFS2_FS=y > +CONFIG_JFFS2_FS_WBUF_VERIFY=y > +CONFIG_UBIFS_FS=y > +CONFIG_CRAMFS=y > +CONFIG_NFS_FS=y > +CONFIG_NFS_V3_ACL=y > +CONFIG_ROOT_NFS=y > +CONFIG_NFSD=y > +CONFIG_NFSD_V3=y > +CONFIG_NFSD_V3_ACL=y > +CONFIG_PRINTK_TIME=y > +CONFIG_DEBUG_SHIRQ=y > +CONFIG_DEBUG_INFO=y > +CONFIG_DEBUG_USER=y > +CONFIG_CRYPTO_USER=y > +CONFIG_CRYPTO_NULL=y > +CONFIG_CRYPTO_AUTHENC=y > +CONFIG_CRYPTO_CBC=y > +CONFIG_CRYPTO_CTR=y > +CONFIG_CRYPTO_XCBC=y > +CONFIG_CRYPTO_DES=y > +CONFIG_CRYPTO_ANSI_CPRNG=y > +CONFIG_CRYPTO_USER_API_HASH=y > +CONFIG_CRYPTO_USER_API_SKCIPHER=y > diff --git a/arch/arm/include/debug/keystone.S b/arch/arm/include/debug/keystone.S > new file mode 100644 > index 0000000..9c75a4c > --- /dev/null > +++ b/arch/arm/include/debug/keystone.S > @@ -0,0 +1,43 @@ > +/* > + * Early serial debug output macro for Keystone SOCs > + * > + * Copyright 2013 Texas Instruments, Inc. > + * Santosh Shilimkar ,santosh.shilimkar@ti.com> Typo? > + * > + * Based on RMKs low level debug code. > + * Copyright (C) 1994-1999 Russell King > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/serial_reg.h> > + > +#define UART_SHIFT 2 > +#if defined(CONFIG_DEBUG_KEYSTONE_UART0) > +#define UART_PHYS 0x02530c00 > +#define UART_VIRT 0xfeb30c00 > +#elif defined(CONFIG_DEBUG_KEYSTONE_UART1) > +#define UART_PHYS 0x02531000 > +#define UART_VIRT 0xfeb31000 > +#endif > + > + .macro addruart, rp, rv, tmp > + ldr \rv, =UART_VIRT @ physical base address > + ldr \rp, =UART_PHYS @ virtual base address > + .endm > + > + .macro senduart,rd,rx > + str \rd, [\rx, #UART_TX << UART_SHIFT] > + .endm > + > + .macro busyuart,rd,rx > +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] > + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE > + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE > + bne 1002b > + .endm > + > + .macro waituart,rd,rx > + .endm > diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig > new file mode 100644 > index 0000000..aebe8cd > --- /dev/null > +++ b/arch/arm/mach-keystone/Kconfig > @@ -0,0 +1,14 @@ > +config ARCH_KEYSTONE > + bool "Texas Instruments Keystone Devices" > + depends on ARCH_MULTI_V7 > + select CPU_V7 > + select ARM_GIC > + select HAVE_ARM_ARCH_TIMER > + select CLKSRC_MMIO > + select GENERIC_CLOCKEVENTS > + select HAVE_SCHED_CLOCK > + select ARCH_WANT_OPTIONAL_GPIOLIB > + select ARM_ERRATA_798181 > + help > + Support for boards based on the Texas Instruments Keystone family of > + SoCs. > diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile > new file mode 100644 > index 0000000..d4671d5 > --- /dev/null > +++ b/arch/arm/mach-keystone/Makefile > @@ -0,0 +1 @@ > +obj-y := keystone.o > diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot > new file mode 100644 > index 0000000..f3835c4 > --- /dev/null > +++ b/arch/arm/mach-keystone/Makefile.boot > @@ -0,0 +1 @@ > +zreladdr-y := 0x80008000 > diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c > new file mode 100644 > index 0000000..c4912c4 > --- /dev/null > +++ b/arch/arm/mach-keystone/keystone.c > @@ -0,0 +1,73 @@ > +/* > + * Keystone2 based boards and SOC related code. > + * > + * Copyright 2013 Texas Instruments, Inc. > + * Cyril Chemparathy <cyril@ti.com> > + * Santosh Shilimkar <santosh.shillimkar@ti.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + */ > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/init.h> > +#include <linux/of_platform.h> > +#include <linux/of_address.h> > + > +#include <asm/setup.h> > +#include <asm/mach/map.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/time.h> > + > +#define PLL_RESET_WRITE_KEY_MASK 0xffff0000 > +#define PLL_RESET_WRITE_KEY 0x5a69 > +#define PLL_RESET BIT(16) > + > +static void __iomem *keystone_rstctrl; > + > +static void __init keystone_init(void) > +{ > + struct device_node *node; > + > + node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset"); > + if (WARN_ON(!node)) { > + pr_warn("ti, keystone-reset node undefined\n"); ti,keystone-reset (no space). Also, you probably want to continue populate other devices so you have a chance to get up to prompt to debug your issue; it's not like panicking will be able to reset anyway. > + return; > + } > + > + keystone_rstctrl = of_iomap(node, 0); > + if (WARN_ON(!keystone_rstctrl)) { > + pr_warn("ti, keystone-reset iomap error\n"); again ti,keystone-reset and the return > + return; > + } > + > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); > +} > + > +static const char *keystone_match[] __initconst = { > + "ti,keystone-evm", > + NULL, > +}; > + > +void keystone_restart(char mode, const char *cmd) > +{ > + u32 val; > + It makes sense to do some sanity check of keystone_rstctrl here and warn and spin (or similar) in case it's not configured, since the configuration can fail above. > + /* Enable write access to RSTCTRL */ > + val = readl(keystone_rstctrl); > + val &= PLL_RESET_WRITE_KEY_MASK; > + val |= PLL_RESET_WRITE_KEY; > + writel(val, keystone_rstctrl); > + > + /* Reset the SOC */ > + val = readl(keystone_rstctrl); > + val &= ~PLL_RESET; > + writel(val, keystone_rstctrl); > +} > + > +DT_MACHINE_START(KEYSTONE, "Keystone") > + .init_machine = keystone_init, > + .dt_compat = keystone_match, > + .restart = keystone_restart, > +MACHINE_END
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49d993c..37fe64c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -948,6 +948,8 @@ source "arch/arm/mach-iop13xx/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" +source "arch/arm/mach-keystone/Kconfig" + source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" @@ -1564,6 +1566,7 @@ config ARCH_NR_GPIO default 352 if ARCH_VT8500 default 288 if ARCH_SUNXI default 264 if MACH_H4700 + default 512 if ARCH_KEYSTONE default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 1d41908..62e7f95 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -251,6 +251,20 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q/DL. + config DEBUG_KEYSTONE_UART0 + bool "Kernel low-level debugging on KEYSTONE2 using UART0" + depends on ARCH_KEYSTONE + help + Say Y here if you want the debug print routines to direct + their output to UART0 serial port on KEYSTONE2 devices. + + config DEBUG_KEYSTONE_UART1 + bool "Kernel low-level debugging on KEYSTONE2 using UART1" + depends on ARCH_KEYSTONE + help + Say Y here if you want the debug print routines to direct + their output to UART1 serial port on KEYSTONE2 devices. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -632,6 +646,8 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART + default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \ + DEBUG_KEYSTONE_UART1 default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1ba358b..a1c9a78 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -194,6 +194,7 @@ machine-$(CONFIG_PLAT_SPEAR) += spear machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_SUNXI) += sunxi +machine-$(CONFIG_ARCH_KEYSTONE) += keystone # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig new file mode 100644 index 0000000..62e968c --- /dev/null +++ b/arch/arm/configs/keystone_defconfig @@ -0,0 +1,157 @@ +# CONFIG_SWAP is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +CONFIG_EMBEDDED=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARM_LPAE=y +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE_DEMUX=y +CONFIG_NET_IPGRE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V2=y +CONFIG_INET_AH=y +CONFIG_INET_IPCOMP=y +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y +CONFIG_NETFILTER_XT_TARGET_CONNMARK=y +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_MATCH_COMMENT=y +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_CPU=y +CONFIG_NETFILTER_XT_MATCH_IPRANGE=y +CONFIG_NETFILTER_XT_MATCH_LENGTH=y +CONFIG_NETFILTER_XT_MATCH_MAC=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y +CONFIG_NETFILTER_XT_MATCH_STATE=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_AH=y +CONFIG_IP_NF_MATCH_ECN=y +CONFIG_IP_NF_MATCH_TTL=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_CLUSTERIP=y +CONFIG_IP_NF_TARGET_ECN=y +CONFIG_IP_NF_TARGET_TTL=y +CONFIG_IP_NF_RAW=y +CONFIG_IP_NF_ARPTABLES=y +CONFIG_IP_NF_ARPFILTER=y +CONFIG_IP_NF_ARP_MANGLE=y +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP_SCTP=y +CONFIG_VLAN_8021Q=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CMA=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_UBI=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_EEPROM_AT24=y +CONFIG_NETDEVICES=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_SPIDEV=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_COMMON_CLK_DEBUG=y +CONFIG_MEMORY=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_UBIFS_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y diff --git a/arch/arm/include/debug/keystone.S b/arch/arm/include/debug/keystone.S new file mode 100644 index 0000000..9c75a4c --- /dev/null +++ b/arch/arm/include/debug/keystone.S @@ -0,0 +1,43 @@ +/* + * Early serial debug output macro for Keystone SOCs + * + * Copyright 2013 Texas Instruments, Inc. + * Santosh Shilimkar ,santosh.shilimkar@ti.com> + * + * Based on RMKs low level debug code. + * Copyright (C) 1994-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_reg.h> + +#define UART_SHIFT 2 +#if defined(CONFIG_DEBUG_KEYSTONE_UART0) +#define UART_PHYS 0x02530c00 +#define UART_VIRT 0xfeb30c00 +#elif defined(CONFIG_DEBUG_KEYSTONE_UART1) +#define UART_PHYS 0x02531000 +#define UART_VIRT 0xfeb31000 +#endif + + .macro addruart, rp, rv, tmp + ldr \rv, =UART_VIRT @ physical base address + ldr \rp, =UART_PHYS @ virtual base address + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig new file mode 100644 index 0000000..aebe8cd --- /dev/null +++ b/arch/arm/mach-keystone/Kconfig @@ -0,0 +1,14 @@ +config ARCH_KEYSTONE + bool "Texas Instruments Keystone Devices" + depends on ARCH_MULTI_V7 + select CPU_V7 + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_ERRATA_798181 + help + Support for boards based on the Texas Instruments Keystone family of + SoCs. diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile new file mode 100644 index 0000000..d4671d5 --- /dev/null +++ b/arch/arm/mach-keystone/Makefile @@ -0,0 +1 @@ +obj-y := keystone.o diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot new file mode 100644 index 0000000..f3835c4 --- /dev/null +++ b/arch/arm/mach-keystone/Makefile.boot @@ -0,0 +1 @@ +zreladdr-y := 0x80008000 diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c new file mode 100644 index 0000000..c4912c4 --- /dev/null +++ b/arch/arm/mach-keystone/keystone.c @@ -0,0 +1,73 @@ +/* + * Keystone2 based boards and SOC related code. + * + * Copyright 2013 Texas Instruments, Inc. + * Cyril Chemparathy <cyril@ti.com> + * Santosh Shilimkar <santosh.shillimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/of.h> +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +#include <asm/setup.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#define PLL_RESET_WRITE_KEY_MASK 0xffff0000 +#define PLL_RESET_WRITE_KEY 0x5a69 +#define PLL_RESET BIT(16) + +static void __iomem *keystone_rstctrl; + +static void __init keystone_init(void) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset"); + if (WARN_ON(!node)) { + pr_warn("ti, keystone-reset node undefined\n"); + return; + } + + keystone_rstctrl = of_iomap(node, 0); + if (WARN_ON(!keystone_rstctrl)) { + pr_warn("ti, keystone-reset iomap error\n"); + return; + } + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *keystone_match[] __initconst = { + "ti,keystone-evm", + NULL, +}; + +void keystone_restart(char mode, const char *cmd) +{ + u32 val; + + /* Enable write access to RSTCTRL */ + val = readl(keystone_rstctrl); + val &= PLL_RESET_WRITE_KEY_MASK; + val |= PLL_RESET_WRITE_KEY; + writel(val, keystone_rstctrl); + + /* Reset the SOC */ + val = readl(keystone_rstctrl); + val &= ~PLL_RESET; + writel(val, keystone_rstctrl); +} + +DT_MACHINE_START(KEYSTONE, "Keystone") + .init_machine = keystone_init, + .dt_compat = keystone_match, + .restart = keystone_restart, +MACHINE_END
Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/Kconfig | 3 + arch/arm/Kconfig.debug | 16 ++++ arch/arm/Makefile | 1 + arch/arm/configs/keystone_defconfig | 157 ++++++++++++++++++++++++++++++++++ arch/arm/include/debug/keystone.S | 43 ++++++++++ arch/arm/mach-keystone/Kconfig | 14 +++ arch/arm/mach-keystone/Makefile | 1 + arch/arm/mach-keystone/Makefile.boot | 1 + arch/arm/mach-keystone/keystone.c | 73 ++++++++++++++++ 9 files changed, 309 insertions(+) create mode 100644 arch/arm/configs/keystone_defconfig create mode 100644 arch/arm/include/debug/keystone.S create mode 100644 arch/arm/mach-keystone/Kconfig create mode 100644 arch/arm/mach-keystone/Makefile create mode 100644 arch/arm/mach-keystone/Makefile.boot create mode 100644 arch/arm/mach-keystone/keystone.c