| Message ID | 1371113039-5784-8-git-send-email-kishon@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Thu, Jun 13, 2013 at 02:13:57PM +0530, Kishon Vijay Abraham I wrote: > Use the generic PHY framework API to get the PHY. The usb_phy_set_resume > and usb_phy_set_suspend is replaced with power_on/get_sync and > power_off/put_sync to align with the new PHY framework. > > musb->xceiv can't be removed as of now because musb core uses xceiv.state and > xceiv.otg. Once there is a separate state machine to handle otg, these can be > moved out of xceiv and then we can start using the generic PHY framework. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > drivers/usb/musb/musb_core.c | 1 + > drivers/usb/musb/musb_core.h | 3 +++ > drivers/usb/musb/omap2430.c | 29 +++++++++++++++++++++-------- > 3 files changed, 25 insertions(+), 8 deletions(-) > > diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c > index 37a261a..f732bcc 100644 > --- a/drivers/usb/musb/musb_core.c > +++ b/drivers/usb/musb/musb_core.c > @@ -1864,6 +1864,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) > musb->board_set_power = plat->set_power; > musb->min_power = plat->min_power; > musb->ops = plat->platform_ops; > + musb->phy_label = plat->phy_label; > > /* The musb_platform_init() call: > * - adjusts musb->mregs > diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h > index 7fb4819..498ae21 100644 > --- a/drivers/usb/musb/musb_core.h > +++ b/drivers/usb/musb/musb_core.h > @@ -46,6 +46,7 @@ > #include <linux/usb.h> > #include <linux/usb/otg.h> > #include <linux/usb/musb.h> > +#include <linux/phy/phy.h> > > struct musb; > struct musb_hw_ep; > @@ -357,6 +358,7 @@ struct musb { > u16 int_tx; > > struct usb_phy *xceiv; > + struct phy *phy; > > int nIrq; > unsigned irq_wake:1; > @@ -434,6 +436,7 @@ struct musb { > unsigned double_buffer_not_ok:1; > > struct musb_hdrc_config *config; > + const char *phy_label; > > #ifdef MUSB_CONFIG_PROC_FS > struct proc_dir_entry *proc_entry; > diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c > index 628b93f..c62a004 100644 > --- a/drivers/usb/musb/omap2430.c > +++ b/drivers/usb/musb/omap2430.c > @@ -348,14 +348,24 @@ static int omap2430_musb_init(struct musb *musb) > * up through ULPI. TWL4030-family PMICs include one, > * which needs a driver, drivers aren't always needed. > */ > - if (dev->parent->of_node) > + if (dev->parent->of_node) { > + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); > + > + /* We can't totally remove musb->xceiv as of now because > + * musb core uses xceiv.state and xceiv.otg. Once we have > + * a separate state machine to handle otg, these can be moved > + * out of xceiv and then we can start using the generic PHY > + * framework > + */ > musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, > "usb-phy", 0); > - else > + } else { > musb->xceiv = devm_usb_get_phy_dev(dev, 0); > + musb->phy = devm_phy_get(dev, musb->phy_label); > + } > > - if (IS_ERR(musb->xceiv)) { > - status = PTR_ERR(musb->xceiv); > + if (IS_ERR(musb->xceiv) || IS_ERR(musb->phy)) { > + status = PTR_ERR(musb->xceiv) | PTR_ERR(musb->phy); > > if (status == -ENXIO) > return status; > @@ -397,9 +407,10 @@ static int omap2430_musb_init(struct musb *musb) > if (glue->status != OMAP_MUSB_UNKNOWN) > omap_musb_set_mailbox(glue); > > - usb_phy_init(musb->xceiv); > + phy_init(musb->phy); > > pm_runtime_put_noidle(musb->controller); > + phy_pm_runtime_put(musb->phy); see, weird unbalanced calls :-) Make it all explicit: phy_pm_runtime_get_sync(phy); phy_init(phy); phy_pm_runtime_put(phy);
Hi, On Tuesday 18 June 2013 03:17 PM, Felipe Balbi wrote: > Hi, > > On Thu, Jun 13, 2013 at 02:13:57PM +0530, Kishon Vijay Abraham I wrote: >> Use the generic PHY framework API to get the PHY. The usb_phy_set_resume >> and usb_phy_set_suspend is replaced with power_on/get_sync and >> power_off/put_sync to align with the new PHY framework. >> >> musb->xceiv can't be removed as of now because musb core uses xceiv.state and >> xceiv.otg. Once there is a separate state machine to handle otg, these can be >> moved out of xceiv and then we can start using the generic PHY framework. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> --- >> drivers/usb/musb/musb_core.c | 1 + >> drivers/usb/musb/musb_core.h | 3 +++ >> drivers/usb/musb/omap2430.c | 29 +++++++++++++++++++++-------- >> 3 files changed, 25 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c >> index 37a261a..f732bcc 100644 >> --- a/drivers/usb/musb/musb_core.c >> +++ b/drivers/usb/musb/musb_core.c >> @@ -1864,6 +1864,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) >> musb->board_set_power = plat->set_power; >> musb->min_power = plat->min_power; >> musb->ops = plat->platform_ops; >> + musb->phy_label = plat->phy_label; >> >> /* The musb_platform_init() call: >> * - adjusts musb->mregs >> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h >> index 7fb4819..498ae21 100644 >> --- a/drivers/usb/musb/musb_core.h >> +++ b/drivers/usb/musb/musb_core.h >> @@ -46,6 +46,7 @@ >> #include <linux/usb.h> >> #include <linux/usb/otg.h> >> #include <linux/usb/musb.h> >> +#include <linux/phy/phy.h> >> >> struct musb; >> struct musb_hw_ep; >> @@ -357,6 +358,7 @@ struct musb { >> u16 int_tx; >> >> struct usb_phy *xceiv; >> + struct phy *phy; >> >> int nIrq; >> unsigned irq_wake:1; >> @@ -434,6 +436,7 @@ struct musb { >> unsigned double_buffer_not_ok:1; >> >> struct musb_hdrc_config *config; >> + const char *phy_label; >> >> #ifdef MUSB_CONFIG_PROC_FS >> struct proc_dir_entry *proc_entry; >> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c >> index 628b93f..c62a004 100644 >> --- a/drivers/usb/musb/omap2430.c >> +++ b/drivers/usb/musb/omap2430.c >> @@ -348,14 +348,24 @@ static int omap2430_musb_init(struct musb *musb) >> * up through ULPI. TWL4030-family PMICs include one, >> * which needs a driver, drivers aren't always needed. >> */ >> - if (dev->parent->of_node) >> + if (dev->parent->of_node) { >> + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); >> + >> + /* We can't totally remove musb->xceiv as of now because >> + * musb core uses xceiv.state and xceiv.otg. Once we have >> + * a separate state machine to handle otg, these can be moved >> + * out of xceiv and then we can start using the generic PHY >> + * framework >> + */ >> musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, >> "usb-phy", 0); >> - else >> + } else { >> musb->xceiv = devm_usb_get_phy_dev(dev, 0); >> + musb->phy = devm_phy_get(dev, musb->phy_label); >> + } >> >> - if (IS_ERR(musb->xceiv)) { >> - status = PTR_ERR(musb->xceiv); >> + if (IS_ERR(musb->xceiv) || IS_ERR(musb->phy)) { >> + status = PTR_ERR(musb->xceiv) | PTR_ERR(musb->phy); >> >> if (status == -ENXIO) >> return status; >> @@ -397,9 +407,10 @@ static int omap2430_musb_init(struct musb *musb) >> if (glue->status != OMAP_MUSB_UNKNOWN) >> omap_musb_set_mailbox(glue); >> >> - usb_phy_init(musb->xceiv); >> + phy_init(musb->phy); >> >> pm_runtime_put_noidle(musb->controller); >> + phy_pm_runtime_put(musb->phy); > > see, weird unbalanced calls :-) > > Make it all explicit: > > phy_pm_runtime_get_sync(phy); > phy_init(phy); > phy_pm_runtime_put(phy); I think then it makes sense to drop get_sync from phy_init()? Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Mon, Jun 24, 2013 at 11:01:56AM +0530, Kishon Vijay Abraham I wrote: > >>@@ -397,9 +407,10 @@ static int omap2430_musb_init(struct musb *musb) > >> if (glue->status != OMAP_MUSB_UNKNOWN) > >> omap_musb_set_mailbox(glue); > >> > >>- usb_phy_init(musb->xceiv); > >>+ phy_init(musb->phy); > >> > >> pm_runtime_put_noidle(musb->controller); > >>+ phy_pm_runtime_put(musb->phy); > > > >see, weird unbalanced calls :-) > > > >Make it all explicit: > > > >phy_pm_runtime_get_sync(phy); > >phy_init(phy); > >phy_pm_runtime_put(phy); > > I think then it makes sense to drop get_sync from phy_init()? maybe not, you don't know if the phy has already autosuspended or not.
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 37a261a..f732bcc 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1864,6 +1864,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops; + musb->phy_label = plat->phy_label; /* The musb_platform_init() call: * - adjusts musb->mregs diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 7fb4819..498ae21 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> +#include <linux/phy/phy.h> struct musb; struct musb_hw_ep; @@ -357,6 +358,7 @@ struct musb { u16 int_tx; struct usb_phy *xceiv; + struct phy *phy; int nIrq; unsigned irq_wake:1; @@ -434,6 +436,7 @@ struct musb { unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; + const char *phy_label; #ifdef MUSB_CONFIG_PROC_FS struct proc_dir_entry *proc_entry; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 628b93f..c62a004 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -348,14 +348,24 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) + if (dev->parent->of_node) { + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); - else + } else { musb->xceiv = devm_usb_get_phy_dev(dev, 0); + musb->phy = devm_phy_get(dev, musb->phy_label); + } - if (IS_ERR(musb->xceiv)) { - status = PTR_ERR(musb->xceiv); + if (IS_ERR(musb->xceiv) || IS_ERR(musb->phy)) { + status = PTR_ERR(musb->xceiv) | PTR_ERR(musb->phy); if (status == -ENXIO) return status; @@ -397,9 +407,10 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != OMAP_MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - usb_phy_init(musb->xceiv); + phy_init(musb->phy); pm_runtime_put_noidle(musb->controller); + phy_pm_runtime_put(musb->phy); return 0; err1: @@ -460,6 +471,7 @@ static int omap2430_musb_exit(struct musb *musb) del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); + phy_exit(musb->phy); return 0; } @@ -619,7 +631,8 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - usb_phy_set_suspend(musb->xceiv, 1); + phy_power_off(musb->phy); + phy_pm_runtime_put(musb->phy); } return 0; @@ -634,8 +647,8 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - - usb_phy_set_suspend(musb->xceiv, 0); + phy_pm_runtime_get_sync(musb->phy); + phy_power_on(musb->phy); } return 0;
Use the generic PHY framework API to get the PHY. The usb_phy_set_resume and usb_phy_set_suspend is replaced with power_on/get_sync and power_off/put_sync to align with the new PHY framework. musb->xceiv can't be removed as of now because musb core uses xceiv.state and xceiv.otg. Once there is a separate state machine to handle otg, these can be moved out of xceiv and then we can start using the generic PHY framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/usb/musb/musb_core.c | 1 + drivers/usb/musb/musb_core.h | 3 +++ drivers/usb/musb/omap2430.c | 29 +++++++++++++++++++++-------- 3 files changed, 25 insertions(+), 8 deletions(-)