Message ID | 201306251047.12899.heiko@sntech.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Heiko, Am Dienstag, den 25.06.2013, 10:47 +0200 schrieb Heiko Stübner: > Some SoCs need parts of their sram for special purposes. So while being part > of the periphal, it should not be part of the genpool controlling the sram. > > Threfore add an option mmio-sram-reserved to keep arbitary portions of the > sram from being part of the pool. > > Suggested-by: Rob Herring <robherring2@gmail.com> > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > Documentation/devicetree/bindings/misc/sram.txt | 8 +++ > drivers/misc/sram.c | 86 +++++++++++++++++++++-- > 2 files changed, 88 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt > index 4d0a00e..eae080e 100644 > --- a/Documentation/devicetree/bindings/misc/sram.txt > +++ b/Documentation/devicetree/bindings/misc/sram.txt > @@ -8,9 +8,17 @@ Required properties: > > - reg : SRAM iomem address range > > +Optional properties: > + > +- mmio-sram-reserved: ordered list of reserved chunks inside the sram that > + should not become part of the genalloc pool. > + Format is <base size>, <base size>, ...; with base being relative to the > + reg property base. > + the keyword to reserve blocks of ram is /memreserve/ - should this property name be aligned with that? > Example: > > sram: sram@5c000000 { > compatible = "mmio-sram"; > reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ > + mmio-sram-reserved = <0x0 0x100>; /* reserve 0x5c000000-0x5c000100 */ > }; > diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c > index afe66571..5fccbe3 100644 > --- a/drivers/misc/sram.c > +++ b/drivers/misc/sram.c > @@ -42,6 +42,8 @@ static int sram_probe(struct platform_device *pdev) > struct sram_dev *sram; > struct resource *res; > unsigned long size; > + const __be32 *reserved_list = NULL; > + int reserved_size = 0; > int ret; > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > @@ -65,12 +67,89 @@ static int sram_probe(struct platform_device *pdev) > if (!sram->pool) > return -ENOMEM; > > - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, > - res->start, size, -1); > - if (ret < 0) { > - if (sram->clk) > - clk_disable_unprepare(sram->clk); > - return ret; > + if (pdev->dev.of_node) { > + reserved_list = of_get_property(pdev->dev.of_node, > + "mmio-sram-reserved", > + &reserved_size); > + if (reserved_list) { > + reserved_size /= sizeof(*reserved_list); > + if (!reserved_size || reserved_size % 2) { > + dev_warn(&pdev->dev, "wrong number of arguments in mmio-sram-reserved\n"); > + reserved_list = NULL; > + } > + } > + } > + > + if (!reserved_list) { > + ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, > + res->start, size, -1); > + if (ret < 0) { > + if (sram->clk) > + clk_disable_unprepare(sram->clk); > + return ret; > + } Moving the clk_prepare_enable() further down would allow to avoid the clk_disable_unprepare() in every error path, > + } else { > + unsigned int cur_start = 0; > + unsigned int cur_size; > + unsigned int rstart; > + unsigned int rsize; > + int i; > + > + for (i = 0; i < reserved_size; i += 2) { > + /* get the next reserved block */ > + rstart = be32_to_cpu(*reserved_list++); > + rsize = be32_to_cpu(*reserved_list++); > + > + /* catch unsorted list entries */ > + if (rstart < cur_start) { > + dev_err(&pdev->dev, "unsorted reserved list (0x%x before current 0x%x)\n", > + rstart, cur_start); > + if (sram->clk) > + clk_disable_unprepare(sram->clk); like here > + return -EINVAL; > + } > + > + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n", > + rstart, rstart + rsize); > + > + /* current start is in a reserved block */ > + if (rstart <= cur_start) { > + cur_start = rstart + rsize; > + continue; > + } > + > + /* > + * allocate the space between the current starting > + * address and the following reserved block > + */ > + cur_size = rstart - cur_start; > + > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > + cur_start, cur_start + cur_size); > + ret = gen_pool_add_virt(sram->pool, > + (unsigned long)virt_base + cur_start, > + res->start + cur_start, cur_size, -1); > + if (ret < 0) { > + if (sram->clk) > + clk_disable_unprepare(sram->clk); and here. > + return ret; > + } > + > + /* next allocation after this reserved block */ > + cur_start = rstart + rsize; > + } > + > + /* allocate the space after the last reserved block */ > + if (cur_start < size) { > + cur_size = size - cur_start; > + > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > + cur_start, cur_start + cur_size); > + ret = gen_pool_add_virt(sram->pool, > + (unsigned long)virt_base + cur_start, > + res->start + cur_start, cur_size, -1); > + } > + > } > > platform_set_drvdata(pdev, sram); Also, I think you could reduce the duplication of gen_pool_add_virt() function calls, somehow like this: unsigned int cur_start = 0; unsigned int cur_size; unsigned int rstart; unsigned int rsize; int i = 0; if (!reserved_list) reserved_size = 0; for (i = 0; i < (reserved_size + 2); i += 2) { if (i < reserved_size) { /* get the next reserved block */ rstart = be32_to_cpu(*reserved_list++); rsize = be32_to_cpu(*reserved_list++); /* catch unsorted list entries */ if (rstart < cur_start) { dev_err(&pdev->dev, "unsorted reserved list (0x%x before current 0x%x)\n", rstart, cur_start); return -EINVAL; } dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n", rstart, rstart + rsize); } else { /* the last chunk extends to the end of the region */ rstart = size; } /* current start is in a reserved block */ if (rstart <= cur_start) { cur_start = rstart + rsize; continue; } /* * allocate the space between the current starting * address and the following reserved block, or the * end of the region. */ cur_size = rstart - cur_start; dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", cur_start, cur_start + cur_size); ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base + cur_start, res->start + cur_start, cur_size, -1); if (ret < 0) return ret; } regards Philipp
Hi Philipp, Am Dienstag, 25. Juni 2013, 12:17:05 schrieb Philipp Zabel: > Hi Heiko, > > Am Dienstag, den 25.06.2013, 10:47 +0200 schrieb Heiko Stübner: > > Some SoCs need parts of their sram for special purposes. So while being > > part of the periphal, it should not be part of the genpool controlling > > the sram. > > > > Threfore add an option mmio-sram-reserved to keep arbitary portions of > > the sram from being part of the pool. > > > > Suggested-by: Rob Herring <robherring2@gmail.com> > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > > --- > > > > Documentation/devicetree/bindings/misc/sram.txt | 8 +++ > > drivers/misc/sram.c | 86 > > +++++++++++++++++++++-- 2 files changed, 88 insertions(+), 6 > > deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/misc/sram.txt > > b/Documentation/devicetree/bindings/misc/sram.txt index 4d0a00e..eae080e > > 100644 > > --- a/Documentation/devicetree/bindings/misc/sram.txt > > +++ b/Documentation/devicetree/bindings/misc/sram.txt > > > > @@ -8,9 +8,17 @@ Required properties: > > - reg : SRAM iomem address range > > > > +Optional properties: > > + > > +- mmio-sram-reserved: ordered list of reserved chunks inside the sram > > that + should not become part of the genalloc pool. > > + Format is <base size>, <base size>, ...; with base being relative to > > the + reg property base. > > + > > the keyword to reserve blocks of ram is /memreserve/ - should this > property name be aligned with that? The mmio-sram-reserved name was suggested by Rob Herring, who I suppose has some slight experience with devicetree :-) . I wasn't able to find real documentation on /memreserve/ but it looks more like it's used to reserve generic memregions, not being node-specific. So reusing this might also cause confusion when the reserve-data now is relative to it's node reg. > > Example: > > > > sram: sram@5c000000 { > > > > compatible = "mmio-sram"; > > reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ > > > > + mmio-sram-reserved = <0x0 0x100>; /* reserve 0x5c000000-0x5c000100 */ > > > > }; > > > > diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c > > index afe66571..5fccbe3 100644 > > --- a/drivers/misc/sram.c > > +++ b/drivers/misc/sram.c > > @@ -42,6 +42,8 @@ static int sram_probe(struct platform_device *pdev) > > > > struct sram_dev *sram; > > struct resource *res; > > unsigned long size; > > > > + const __be32 *reserved_list = NULL; > > + int reserved_size = 0; > > > > int ret; > > > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > > @@ -65,12 +67,89 @@ static int sram_probe(struct platform_device *pdev) > > > > if (!sram->pool) > > > > return -ENOMEM; > > > > - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, > > - res->start, size, -1); > > - if (ret < 0) { > > - if (sram->clk) > > - clk_disable_unprepare(sram->clk); > > - return ret; > > + if (pdev->dev.of_node) { > > + reserved_list = of_get_property(pdev->dev.of_node, > > + "mmio-sram-reserved", > > + &reserved_size); > > + if (reserved_list) { > > + reserved_size /= sizeof(*reserved_list); > > + if (!reserved_size || reserved_size % 2) { > > + dev_warn(&pdev->dev, "wrong number of arguments in > > mmio-sram-reserved\n"); + reserved_list = NULL; > > + } > > + } > > + } > > + > > + if (!reserved_list) { > > + ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, > > + res->start, size, -1); > > + if (ret < 0) { > > + if (sram->clk) > > + clk_disable_unprepare(sram->clk); > > + return ret; > > + } > > Moving the clk_prepare_enable() further down would allow to avoid the > clk_disable_unprepare() in every error path, > > > + } else { > > + unsigned int cur_start = 0; > > + unsigned int cur_size; > > + unsigned int rstart; > > + unsigned int rsize; > > + int i; > > + > > + for (i = 0; i < reserved_size; i += 2) { > > + /* get the next reserved block */ > > + rstart = be32_to_cpu(*reserved_list++); > > + rsize = be32_to_cpu(*reserved_list++); > > + > > + /* catch unsorted list entries */ > > + if (rstart < cur_start) { > > + dev_err(&pdev->dev, "unsorted reserved list (0x%x before current > > 0x%x)\n", + rstart, cur_start); > > + if (sram->clk) > > + clk_disable_unprepare(sram->clk); > > like here > > > + return -EINVAL; > > + } > > + > > + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n", > > + rstart, rstart + rsize); > > + > > + /* current start is in a reserved block */ > > + if (rstart <= cur_start) { > > + cur_start = rstart + rsize; > > + continue; > > + } > > + > > + /* > > + * allocate the space between the current starting > > + * address and the following reserved block > > + */ > > + cur_size = rstart - cur_start; > > + > > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > > + cur_start, cur_start + cur_size); > > + ret = gen_pool_add_virt(sram->pool, > > + (unsigned long)virt_base + cur_start, > > + res->start + cur_start, cur_size, -1); > > + if (ret < 0) { > > + if (sram->clk) > > + clk_disable_unprepare(sram->clk); > > and here. > > > + return ret; > > + } > > + > > + /* next allocation after this reserved block */ > > + cur_start = rstart + rsize; > > + } > > + > > + /* allocate the space after the last reserved block */ > > + if (cur_start < size) { > > + cur_size = size - cur_start; > > + > > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > > + cur_start, cur_start + cur_size); > > + ret = gen_pool_add_virt(sram->pool, > > + (unsigned long)virt_base + cur_start, > > + res->start + cur_start, cur_size, -1); > > + } > > + > > > > } > > > > platform_set_drvdata(pdev, sram); > > Also, I think you could reduce the duplication of gen_pool_add_virt() > function calls, somehow like this: > > unsigned int cur_start = 0; > unsigned int cur_size; > unsigned int rstart; > unsigned int rsize; > int i = 0; > > if (!reserved_list) > reserved_size = 0; > > for (i = 0; i < (reserved_size + 2); i += 2) { > if (i < reserved_size) { > /* get the next reserved block */ > rstart = be32_to_cpu(*reserved_list++); > rsize = be32_to_cpu(*reserved_list++); > > /* catch unsorted list entries */ > if (rstart < cur_start) { > dev_err(&pdev->dev, > "unsorted reserved list (0x%x before current 0x%x)\n", > rstart, cur_start); > return -EINVAL; > } > > dev_dbg(&pdev->dev, > "found reserved block 0x%x-0x%x\n", > rstart, rstart + rsize); > } else { > /* the last chunk extends to the end of the region */ > rstart = size; > } > > /* current start is in a reserved block */ > if (rstart <= cur_start) { > cur_start = rstart + rsize; > continue; > } > > /* > * allocate the space between the current starting > * address and the following reserved block, or the > * end of the region. > */ > cur_size = rstart - cur_start; > > dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > cur_start, cur_start + cur_size); > ret = gen_pool_add_virt(sram->pool, > (unsigned long)virt_base + cur_start, > res->start + cur_start, cur_size, -1); > if (ret < 0) > return ret; > } yep, this looks nicer - same for moving the clk_prepare_enable to below this loop to unclutter the error-path. So I will incorporate this in v3. Thanks Heiko
Am Mittwoch, den 26.06.2013, 11:18 +0200 schrieb Heiko Stübner: > Hi Philipp, > > Am Dienstag, 25. Juni 2013, 12:17:05 schrieb Philipp Zabel: > > Hi Heiko, > > > > Am Dienstag, den 25.06.2013, 10:47 +0200 schrieb Heiko Stübner: > > > Some SoCs need parts of their sram for special purposes. So while being > > > part of the periphal, it should not be part of the genpool controlling > > > the sram. > > > > > > Threfore add an option mmio-sram-reserved to keep arbitary portions of > > > the sram from being part of the pool. > > > > > > Suggested-by: Rob Herring <robherring2@gmail.com> > > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > > > --- > > > > > > Documentation/devicetree/bindings/misc/sram.txt | 8 +++ > > > drivers/misc/sram.c | 86 > > > +++++++++++++++++++++-- 2 files changed, 88 insertions(+), 6 > > > deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/misc/sram.txt > > > b/Documentation/devicetree/bindings/misc/sram.txt index 4d0a00e..eae080e > > > 100644 > > > --- a/Documentation/devicetree/bindings/misc/sram.txt > > > +++ b/Documentation/devicetree/bindings/misc/sram.txt > > > > > > @@ -8,9 +8,17 @@ Required properties: > > > - reg : SRAM iomem address range > > > > > > +Optional properties: > > > + > > > +- mmio-sram-reserved: ordered list of reserved chunks inside the sram > > > that + should not become part of the genalloc pool. > > > + Format is <base size>, <base size>, ...; with base being relative to > > > the + reg property base. > > > + > > > > the keyword to reserve blocks of ram is /memreserve/ - should this > > property name be aligned with that? > > The mmio-sram-reserved name was suggested by Rob Herring, who I suppose has > some slight experience with devicetree :-) . That did sound like a suggestion from the top of his head, though. I just wanted to point out the similarity in function, in case it is relevant. > I wasn't able to find real documentation on /memreserve/ but it looks more > like it's used to reserve generic memregions, not being node-specific. > So reusing this might also cause confusion when the reserve-data now is > relative to it's node reg. True. > > > Example: > > > > > > sram: sram@5c000000 { > > > > > > compatible = "mmio-sram"; > > > reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ > > > > > > + mmio-sram-reserved = <0x0 0x100>; /* reserve 0x5c000000-0x5c000100 */ > > > > > > }; > > > > > > diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c > > > index afe66571..5fccbe3 100644 > > > --- a/drivers/misc/sram.c > > > +++ b/drivers/misc/sram.c > > > @@ -42,6 +42,8 @@ static int sram_probe(struct platform_device *pdev) > > > > > > struct sram_dev *sram; > > > struct resource *res; > > > unsigned long size; > > > > > > + const __be32 *reserved_list = NULL; > > > + int reserved_size = 0; > > > > > > int ret; > > > > > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > > > > @@ -65,12 +67,89 @@ static int sram_probe(struct platform_device *pdev) > > > > > > if (!sram->pool) > > > > > > return -ENOMEM; > > > > > > - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, > > > - res->start, size, -1); > > > - if (ret < 0) { > > > - if (sram->clk) > > > - clk_disable_unprepare(sram->clk); > > > - return ret; > > > + if (pdev->dev.of_node) { > > > + reserved_list = of_get_property(pdev->dev.of_node, > > > + "mmio-sram-reserved", > > > + &reserved_size); > > > + if (reserved_list) { > > > + reserved_size /= sizeof(*reserved_list); > > > + if (!reserved_size || reserved_size % 2) { > > > + dev_warn(&pdev->dev, "wrong number of arguments in > > > mmio-sram-reserved\n"); + reserved_list = NULL; > > > + } > > > + } > > > + } > > > + > > > + if (!reserved_list) { > > > + ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, > > > + res->start, size, -1); > > > + if (ret < 0) { > > > + if (sram->clk) > > > + clk_disable_unprepare(sram->clk); > > > + return ret; > > > + } > > > > Moving the clk_prepare_enable() further down would allow to avoid the > > clk_disable_unprepare() in every error path, > > > > > + } else { > > > + unsigned int cur_start = 0; > > > + unsigned int cur_size; > > > + unsigned int rstart; > > > + unsigned int rsize; > > > + int i; > > > + > > > + for (i = 0; i < reserved_size; i += 2) { > > > + /* get the next reserved block */ > > > + rstart = be32_to_cpu(*reserved_list++); > > > + rsize = be32_to_cpu(*reserved_list++); > > > + > > > + /* catch unsorted list entries */ > > > + if (rstart < cur_start) { > > > + dev_err(&pdev->dev, "unsorted reserved list (0x%x before > current > > > 0x%x)\n", + rstart, cur_start); > > > + if (sram->clk) > > > + clk_disable_unprepare(sram->clk); > > > > like here > > > > > + return -EINVAL; > > > + } > > > + > > > + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n", > > > + rstart, rstart + rsize); > > > + > > > + /* current start is in a reserved block */ > > > + if (rstart <= cur_start) { > > > + cur_start = rstart + rsize; > > > + continue; > > > + } > > > + > > > + /* > > > + * allocate the space between the current starting > > > + * address and the following reserved block > > > + */ > > > + cur_size = rstart - cur_start; > > > + > > > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > > > + cur_start, cur_start + cur_size); > > > + ret = gen_pool_add_virt(sram->pool, > > > + (unsigned long)virt_base + cur_start, > > > + res->start + cur_start, cur_size, -1); > > > + if (ret < 0) { > > > + if (sram->clk) > > > + clk_disable_unprepare(sram->clk); > > > > and here. > > > > > + return ret; > > > + } > > > + > > > + /* next allocation after this reserved block */ > > > + cur_start = rstart + rsize; > > > + } > > > + > > > + /* allocate the space after the last reserved block */ > > > + if (cur_start < size) { > > > + cur_size = size - cur_start; > > > + > > > + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > > > + cur_start, cur_start + cur_size); > > > + ret = gen_pool_add_virt(sram->pool, > > > + (unsigned long)virt_base + cur_start, > > > + res->start + cur_start, cur_size, -1); > > > + } > > > + > > > > > > } > > > > > > platform_set_drvdata(pdev, sram); > > > > Also, I think you could reduce the duplication of gen_pool_add_virt() > > function calls, somehow like this: > > > > unsigned int cur_start = 0; > > unsigned int cur_size; > > unsigned int rstart; > > unsigned int rsize; > > int i = 0; > > > > if (!reserved_list) > > reserved_size = 0; > > > > for (i = 0; i < (reserved_size + 2); i += 2) { > > if (i < reserved_size) { > > /* get the next reserved block */ > > rstart = be32_to_cpu(*reserved_list++); > > rsize = be32_to_cpu(*reserved_list++); > > > > /* catch unsorted list entries */ > > if (rstart < cur_start) { > > dev_err(&pdev->dev, > > "unsorted reserved list (0x%x before current 0x%x)\n", > > rstart, cur_start); > > return -EINVAL; > > } > > > > dev_dbg(&pdev->dev, > > "found reserved block 0x%x-0x%x\n", > > rstart, rstart + rsize); > > } else { > > /* the last chunk extends to the end of the region */ > > rstart = size; > > } > > > > /* current start is in a reserved block */ > > if (rstart <= cur_start) { > > cur_start = rstart + rsize; > > continue; > > } > > > > /* > > * allocate the space between the current starting > > * address and the following reserved block, or the > > * end of the region. > > */ > > cur_size = rstart - cur_start; > > > > dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", > > cur_start, cur_start + cur_size); > > ret = gen_pool_add_virt(sram->pool, > > (unsigned long)virt_base + cur_start, > > res->start + cur_start, cur_size, -1); > > if (ret < 0) > > return ret; > > } > > yep, this looks nicer - same for moving the clk_prepare_enable to below this > loop to unclutter the error-path. > > So I will incorporate this in v3. Excellent. thanks Philipp
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt index 4d0a00e..eae080e 100644 --- a/Documentation/devicetree/bindings/misc/sram.txt +++ b/Documentation/devicetree/bindings/misc/sram.txt @@ -8,9 +8,17 @@ Required properties: - reg : SRAM iomem address range +Optional properties: + +- mmio-sram-reserved: ordered list of reserved chunks inside the sram that + should not become part of the genalloc pool. + Format is <base size>, <base size>, ...; with base being relative to the + reg property base. + Example: sram: sram@5c000000 { compatible = "mmio-sram"; reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ + mmio-sram-reserved = <0x0 0x100>; /* reserve 0x5c000000-0x5c000100 */ }; diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c index afe66571..5fccbe3 100644 --- a/drivers/misc/sram.c +++ b/drivers/misc/sram.c @@ -42,6 +42,8 @@ static int sram_probe(struct platform_device *pdev) struct sram_dev *sram; struct resource *res; unsigned long size; + const __be32 *reserved_list = NULL; + int reserved_size = 0; int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -65,12 +67,89 @@ static int sram_probe(struct platform_device *pdev) if (!sram->pool) return -ENOMEM; - ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, - res->start, size, -1); - if (ret < 0) { - if (sram->clk) - clk_disable_unprepare(sram->clk); - return ret; + if (pdev->dev.of_node) { + reserved_list = of_get_property(pdev->dev.of_node, + "mmio-sram-reserved", + &reserved_size); + if (reserved_list) { + reserved_size /= sizeof(*reserved_list); + if (!reserved_size || reserved_size % 2) { + dev_warn(&pdev->dev, "wrong number of arguments in mmio-sram-reserved\n"); + reserved_list = NULL; + } + } + } + + if (!reserved_list) { + ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base, + res->start, size, -1); + if (ret < 0) { + if (sram->clk) + clk_disable_unprepare(sram->clk); + return ret; + } + } else { + unsigned int cur_start = 0; + unsigned int cur_size; + unsigned int rstart; + unsigned int rsize; + int i; + + for (i = 0; i < reserved_size; i += 2) { + /* get the next reserved block */ + rstart = be32_to_cpu(*reserved_list++); + rsize = be32_to_cpu(*reserved_list++); + + /* catch unsorted list entries */ + if (rstart < cur_start) { + dev_err(&pdev->dev, "unsorted reserved list (0x%x before current 0x%x)\n", + rstart, cur_start); + if (sram->clk) + clk_disable_unprepare(sram->clk); + return -EINVAL; + } + + dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n", + rstart, rstart + rsize); + + /* current start is in a reserved block */ + if (rstart <= cur_start) { + cur_start = rstart + rsize; + continue; + } + + /* + * allocate the space between the current starting + * address and the following reserved block + */ + cur_size = rstart - cur_start; + + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", + cur_start, cur_start + cur_size); + ret = gen_pool_add_virt(sram->pool, + (unsigned long)virt_base + cur_start, + res->start + cur_start, cur_size, -1); + if (ret < 0) { + if (sram->clk) + clk_disable_unprepare(sram->clk); + return ret; + } + + /* next allocation after this reserved block */ + cur_start = rstart + rsize; + } + + /* allocate the space after the last reserved block */ + if (cur_start < size) { + cur_size = size - cur_start; + + dev_dbg(&pdev->dev, "adding chunk 0x%x-0x%x\n", + cur_start, cur_start + cur_size); + ret = gen_pool_add_virt(sram->pool, + (unsigned long)virt_base + cur_start, + res->start + cur_start, cur_size, -1); + } + } platform_set_drvdata(pdev, sram);
Some SoCs need parts of their sram for special purposes. So while being part of the periphal, it should not be part of the genpool controlling the sram. Threfore add an option mmio-sram-reserved to keep arbitary portions of the sram from being part of the pool. Suggested-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- Documentation/devicetree/bindings/misc/sram.txt | 8 +++ drivers/misc/sram.c | 86 +++++++++++++++++++++-- 2 files changed, 88 insertions(+), 6 deletions(-)