Message ID | 1372339773-4974-1-git-send-email-jonas.jensen@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Jonas, On Thu, Jun 27, 2013 at 03:29:33PM +0200, Jonas Jensen wrote: > This patch adds an irqchip driver for the main interrupt controller found > on MOXA ART SoCs. > > Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> > --- > > Notes: > Applies to next-20130619 > > Changes since v2: > > 1. bail if irq_alloc_domain_generic_chips fails > 2. remove separate function "moxart_alloc_gc", move all code to main init > 3. if of_iomap fails, instead of panic, print error and return -EINVAL > 4. use of_property_read_u32 instead of be32_to_cpup(of_get_property(..)) > > drivers/irqchip/Makefile | 1 + > drivers/irqchip/irq-moxart.c | 110 +++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 111 insertions(+) > create mode 100644 drivers/irqchip/irq-moxart.c > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > index cda4cb5..956d129 100644 > --- a/drivers/irqchip/Makefile > +++ b/drivers/irqchip/Makefile > @@ -16,3 +16,4 @@ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o > obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o > obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o > obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o > +obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o > diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c > new file mode 100644 > index 0000000..0815108 > --- /dev/null > +++ b/drivers/irqchip/irq-moxart.c > @@ -0,0 +1,110 @@ > +/* > + * MOXA ART SoCs IRQ chip driver. > + * > + * Copyright (C) 2013 Jonas Jensen > + * > + * Jonas Jensen <jonas.jensen@gmail.com> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include <linux/io.h> > +#include <linux/irq.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/irqdomain.h> > + > +#include <asm/exception.h> > + > +#include "irqchip.h" > + > +#define IRQ_SOURCE_REG 0 > +#define IRQ_MASK_REG 0x04 > +#define IRQ_CLEAR_REG 0x08 > +#define IRQ_MODE_REG 0x0c > +#define IRQ_LEVEL_REG 0x10 > +#define IRQ_STATUS_REG 0x14 > + > +#define FIQ_SOURCE_REG 0x20 > +#define FIQ_MASK_REG 0x24 > +#define FIQ_CLEAR_REG 0x28 > +#define FIQ_MODE_REG 0x2c > +#define FIQ_LEVEL_REG 0x30 > +#define FIQ_STATUS_REG 0x34 > + > +static void __iomem *moxart_irq_base; > +static struct irq_domain *moxart_irq_domain; > +static unsigned int interrupt_mask; I would pack this into a struct s.t. you have only one global variable for the chip instance. More or less a matter of taste. > + > +asmlinkage void __exception_irq_entry moxart_handle_irq(struct pt_regs *regs) can this be static? > +{ > + u32 irqstat; > + int hwirq; > + > + irqstat = readl(moxart_irq_base + IRQ_STATUS_REG); > + > + while (irqstat) { > + hwirq = ffs(irqstat) - 1; > + handle_IRQ(irq_find_mapping(moxart_irq_domain, hwirq), regs); Call irq_linear_revmap instead of irq_find_mapping. > + irqstat &= ~(1 << hwirq); > + } > +} > + > +static int __init moxart_of_intc_init(struct device_node *node, > + struct device_node *parent) wrong indention. > +{ > + unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; > + int ret; > + struct irq_chip_generic *gc; > + > + ret = of_property_read_u32(node, "interrupt-mask", &interrupt_mask); > + if (ret) > + pr_err("%s: can't read interrupt-mask DT property\n", > + node->full_name); ditto > + pr_debug("%s: interrupt-mask=%x\n", node->full_name, interrupt_mask); > + > + moxart_irq_base = of_iomap(node, 0); > + if (!moxart_irq_base) { > + pr_err("%s: unable to map INTC CPU registers\n", > + node->full_name); > + return -EINVAL; > + } > + > + moxart_irq_domain = irq_domain_add_linear(node, 32, > + &irq_generic_chip_ops, moxart_irq_base); if (!moxart_irq_domain) { /* error handling */ } > + > + ret = irq_alloc_domain_generic_chips(moxart_irq_domain, 32, 1, > + "MOXARTINTC", handle_edge_irq, > + clr, 0, IRQ_GC_INIT_MASK_CACHE); > + > + if (ret) { > + pr_err("%s: could not allocate generic chip\n", __func__); you should free moxart_irq_domain here. > + return -EINVAL; > + } > + > + gc = irq_get_domain_generic_chip(moxart_irq_domain, 0); > + > + gc->reg_base = moxart_irq_base; > + gc->chip_types[0].regs.mask = IRQ_MASK_REG; > + gc->chip_types[0].regs.ack = IRQ_CLEAR_REG; > + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; > + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; > + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; > + > + writel(0, moxart_irq_base + IRQ_MASK_REG); > + writel(0xffffffff, moxart_irq_base + IRQ_CLEAR_REG); > + > + writel(interrupt_mask, moxart_irq_base + IRQ_MODE_REG); > + writel(interrupt_mask, moxart_irq_base + IRQ_LEVEL_REG); > + > + set_handle_irq(moxart_handle_irq); > + > + pr_info("%s: %s finished\n", node->full_name, __func__); "finished" looks like a debug message. IMHO either drop the message or write something more useful. > + > + return 0; > +} > +IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-interrupt-controller", > + moxart_of_intc_init); > -- Best regards Uwe
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index cda4cb5..956d129 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o +obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c new file mode 100644 index 0000000..0815108 --- /dev/null +++ b/drivers/irqchip/irq-moxart.c @@ -0,0 +1,110 @@ +/* + * MOXA ART SoCs IRQ chip driver. + * + * Copyright (C) 2013 Jonas Jensen + * + * Jonas Jensen <jonas.jensen@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> + +#include <asm/exception.h> + +#include "irqchip.h" + +#define IRQ_SOURCE_REG 0 +#define IRQ_MASK_REG 0x04 +#define IRQ_CLEAR_REG 0x08 +#define IRQ_MODE_REG 0x0c +#define IRQ_LEVEL_REG 0x10 +#define IRQ_STATUS_REG 0x14 + +#define FIQ_SOURCE_REG 0x20 +#define FIQ_MASK_REG 0x24 +#define FIQ_CLEAR_REG 0x28 +#define FIQ_MODE_REG 0x2c +#define FIQ_LEVEL_REG 0x30 +#define FIQ_STATUS_REG 0x34 + +static void __iomem *moxart_irq_base; +static struct irq_domain *moxart_irq_domain; +static unsigned int interrupt_mask; + +asmlinkage void __exception_irq_entry moxart_handle_irq(struct pt_regs *regs) +{ + u32 irqstat; + int hwirq; + + irqstat = readl(moxart_irq_base + IRQ_STATUS_REG); + + while (irqstat) { + hwirq = ffs(irqstat) - 1; + handle_IRQ(irq_find_mapping(moxart_irq_domain, hwirq), regs); + irqstat &= ~(1 << hwirq); + } +} + +static int __init moxart_of_intc_init(struct device_node *node, + struct device_node *parent) +{ + unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; + int ret; + struct irq_chip_generic *gc; + + ret = of_property_read_u32(node, "interrupt-mask", &interrupt_mask); + if (ret) + pr_err("%s: can't read interrupt-mask DT property\n", + node->full_name); + pr_debug("%s: interrupt-mask=%x\n", node->full_name, interrupt_mask); + + moxart_irq_base = of_iomap(node, 0); + if (!moxart_irq_base) { + pr_err("%s: unable to map INTC CPU registers\n", + node->full_name); + return -EINVAL; + } + + moxart_irq_domain = irq_domain_add_linear(node, 32, + &irq_generic_chip_ops, moxart_irq_base); + + ret = irq_alloc_domain_generic_chips(moxart_irq_domain, 32, 1, + "MOXARTINTC", handle_edge_irq, + clr, 0, IRQ_GC_INIT_MASK_CACHE); + + if (ret) { + pr_err("%s: could not allocate generic chip\n", __func__); + return -EINVAL; + } + + gc = irq_get_domain_generic_chip(moxart_irq_domain, 0); + + gc->reg_base = moxart_irq_base; + gc->chip_types[0].regs.mask = IRQ_MASK_REG; + gc->chip_types[0].regs.ack = IRQ_CLEAR_REG; + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; + + writel(0, moxart_irq_base + IRQ_MASK_REG); + writel(0xffffffff, moxart_irq_base + IRQ_CLEAR_REG); + + writel(interrupt_mask, moxart_irq_base + IRQ_MODE_REG); + writel(interrupt_mask, moxart_irq_base + IRQ_LEVEL_REG); + + set_handle_irq(moxart_handle_irq); + + pr_info("%s: %s finished\n", node->full_name, __func__); + + return 0; +} +IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-interrupt-controller", + moxart_of_intc_init);
This patch adds an irqchip driver for the main interrupt controller found on MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> --- Notes: Applies to next-20130619 Changes since v2: 1. bail if irq_alloc_domain_generic_chips fails 2. remove separate function "moxart_alloc_gc", move all code to main init 3. if of_iomap fails, instead of panic, print error and return -EINVAL 4. use of_property_read_u32 instead of be32_to_cpup(of_get_property(..)) drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-moxart.c | 110 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 drivers/irqchip/irq-moxart.c