| Message ID | 001501ce73bf$87c49c00$974dd400$@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Friday 28 June 2013 10:52 AM, Jingoo Han wrote: > Add a PHY provider driver for the Samsung Exynos SoC DP PHY. > > Signed-off-by: Jingoo Han <jg1.han@samsung.com> > --- > .../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++ > drivers/phy/Kconfig | 8 ++ > drivers/phy/Makefile | 3 +- > drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++ > 4 files changed, 147 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > create mode 100644 drivers/phy/phy-exynos-dp-video.c > > diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > new file mode 100644 > index 0000000..8b6fa79 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > @@ -0,0 +1,7 @@ > +Samsung EXYNOS SoC series DP PHY > +------------------------------------------------- > + > +Required properties: > +- compatible : should be "samsung,exynos5250-dp-video-phy"; > +- reg : offset and length of the DP PHY register set; > +- #phy-cells : from the generic phy bindings, must be 1; > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 5f85909..6d10e3b 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -11,3 +11,11 @@ menuconfig GENERIC_PHY > devices present in the kernel. This layer will have the generic > API by which phy drivers can create PHY using the phy framework and > phy users can obtain reference to the PHY. > + > +if GENERIC_PHY > + > +config PHY_EXYNOS_DP_VIDEO > + tristate "EXYNOS SoC series DP PHY driver" > + help > + Support for DP PHY found on Samsung EXYNOS SoCs. > +endif > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 9e9560f..d8d861c 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -2,4 +2,5 @@ > # Makefile for the phy drivers. > # > > -obj-$(CONFIG_GENERIC_PHY) += phy-core.o > +obj-$(CONFIG_GENERIC_PHY) += phy-core.o > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c > new file mode 100644 > index 0000000..376b3bc2 > --- /dev/null > +++ b/drivers/phy/phy-exynos-dp-video.c > @@ -0,0 +1,130 @@ > +/* > + * Samsung EXYNOS SoC series DP PHY driver > + * > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > + * Author: Jingoo Han <jg1.han@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/delay.h> this header file is not needed here. > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/phy/phy.h> > +#include <linux/platform_device.h> > +#include <linux/spinlock.h> > + > +/* DPTX_PHY_CONTROL register */ > +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) > + > +struct exynos_dp_video_phy { > + spinlock_t slock; > + struct phy *phys; > + void __iomem *regs; > +}; > + > +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) > +{ > + void __iomem *addr; > + unsigned long flags; > + u32 reg; > + > + addr = state->regs; > + > + spin_lock_irqsave(&state->slock, flags); > + reg = readl(addr); > + if (on) > + reg |= EXYNOS_DPTX_PHY_ENABLE; > + else > + reg &= ~EXYNOS_DPTX_PHY_ENABLE; > + writel(reg, addr); > + spin_unlock_irqrestore(&state->slock, flags); > + return 0; > +} > + > +static int exynos_dp_video_phy_power_on(struct phy *phy) > +{ > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > + > + return __set_phy_state(state, 1); > +} > + > +static int exynos_dp_video_phy_power_off(struct phy *phy) > +{ > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > + > + return __set_phy_state(state, 0); > +} > + > +static struct phy *exynos_dp_video_phy_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct exynos_dp_video_phy *state = dev_get_drvdata(dev); > + > + return state->phys; you can instead use of_phy_simple_xlate for such simple cases. > +} > + > +static struct phy_ops exynos_dp_video_phy_ops = { > + .power_on = exynos_dp_video_phy_power_on, > + .power_off = exynos_dp_video_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static int exynos_dp_video_phy_probe(struct platform_device *pdev) > +{ > + struct exynos_dp_video_phy *state; > + struct device *dev = &pdev->dev; > + struct resource *res; > + struct phy_provider *phy_provider; > + > + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); > + if (!state) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + > + state->regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(state->regs)) > + return PTR_ERR(state->regs); > + > + dev_set_drvdata(dev, state); > + > + phy_provider = devm_of_phy_provider_register(dev, > + exynos_dp_video_phy_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR(phy_provider); > + > + state->phys = devm_phy_create(dev, 0, &exynos_dp_video_phy_ops, "dp"); > + if (IS_ERR(state->phys)) { > + dev_err(dev, "failed to create DP PHY\n"); > + return PTR_ERR(state->phys); > + } > + phy_set_drvdata(state->phys, state); > + > + return 0; > +} > + > +static const struct of_device_id exynos_dp_video_phy_of_match[] = { > + { .compatible = "samsung,exynos5250-dp-video-phy" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); This above should come inside #ifdef CONFIG_OF. > + > +static struct platform_driver exynos_dp_video_phy_driver = { > + .probe = exynos_dp_video_phy_probe, missing .remove? > + .driver = { > + .of_match_table = exynos_dp_video_phy_of_match, > + .name = "exynos-dp-video-phy", > + .owner = THIS_MODULE, > + } > +}; > +module_platform_driver(exynos_dp_video_phy_driver); > + > +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); > +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); > +MODULE_LICENSE("GPL v2"); Thanks Kishon
On Friday, June 28, 2013 2:31 PM, Kishon Vijay Abraham I wrote: > > Hi, > > On Friday 28 June 2013 10:52 AM, Jingoo Han wrote: > > Add a PHY provider driver for the Samsung Exynos SoC DP PHY. > > > > Signed-off-by: Jingoo Han <jg1.han@samsung.com> > > --- > > .../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++ > > drivers/phy/Kconfig | 8 ++ > > drivers/phy/Makefile | 3 +- > > drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++ > > 4 files changed, 147 insertions(+), 1 deletion(-) > > create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > > create mode 100644 drivers/phy/phy-exynos-dp-video.c > > > > diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > > b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > > new file mode 100644 > > index 0000000..8b6fa79 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > > @@ -0,0 +1,7 @@ > > +Samsung EXYNOS SoC series DP PHY > > +------------------------------------------------- > > + > > +Required properties: > > +- compatible : should be "samsung,exynos5250-dp-video-phy"; > > +- reg : offset and length of the DP PHY register set; > > +- #phy-cells : from the generic phy bindings, must be 1; > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > > index 5f85909..6d10e3b 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -11,3 +11,11 @@ menuconfig GENERIC_PHY > > devices present in the kernel. This layer will have the generic > > API by which phy drivers can create PHY using the phy framework and > > phy users can obtain reference to the PHY. > > + > > +if GENERIC_PHY > > + > > +config PHY_EXYNOS_DP_VIDEO > > + tristate "EXYNOS SoC series DP PHY driver" > > + help > > + Support for DP PHY found on Samsung EXYNOS SoCs. > > +endif > > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > > index 9e9560f..d8d861c 100644 > > --- a/drivers/phy/Makefile > > +++ b/drivers/phy/Makefile > > @@ -2,4 +2,5 @@ > > # Makefile for the phy drivers. > > # > > > > -obj-$(CONFIG_GENERIC_PHY) += phy-core.o > > +obj-$(CONFIG_GENERIC_PHY) += phy-core.o > > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > > diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c > > new file mode 100644 > > index 0000000..376b3bc2 > > --- /dev/null > > +++ b/drivers/phy/phy-exynos-dp-video.c > > @@ -0,0 +1,130 @@ > > +/* > > + * Samsung EXYNOS SoC series DP PHY driver > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Jingoo Han <jg1.han@samsung.com> > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include <linux/delay.h> > > this header file is not needed here. OK, I will remove it. > > > +#include <linux/io.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/phy/phy.h> > > +#include <linux/platform_device.h> > > +#include <linux/spinlock.h> > > + > > +/* DPTX_PHY_CONTROL register */ > > +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) > > + > > +struct exynos_dp_video_phy { > > + spinlock_t slock; > > + struct phy *phys; > > + void __iomem *regs; > > +}; > > + > > +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) > > +{ > > + void __iomem *addr; > > + unsigned long flags; > > + u32 reg; > > + > > + addr = state->regs; > > + > > + spin_lock_irqsave(&state->slock, flags); > > + reg = readl(addr); > > + if (on) > > + reg |= EXYNOS_DPTX_PHY_ENABLE; > > + else > > + reg &= ~EXYNOS_DPTX_PHY_ENABLE; > > + writel(reg, addr); > > + spin_unlock_irqrestore(&state->slock, flags); > > + return 0; > > +} > > + > > +static int exynos_dp_video_phy_power_on(struct phy *phy) > > +{ > > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > > + > > + return __set_phy_state(state, 1); > > +} > > + > > +static int exynos_dp_video_phy_power_off(struct phy *phy) > > +{ > > + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > > + > > + return __set_phy_state(state, 0); > > +} > > + > > +static struct phy *exynos_dp_video_phy_xlate(struct device *dev, > > + struct of_phandle_args *args) > > +{ > > + struct exynos_dp_video_phy *state = dev_get_drvdata(dev); > > + > > + return state->phys; > > you can instead use of_phy_simple_xlate for such simple cases. OK, I will use of_phy_simple_xlate(). > > +} > > + > > +static struct phy_ops exynos_dp_video_phy_ops = { > > + .power_on = exynos_dp_video_phy_power_on, > > + .power_off = exynos_dp_video_phy_power_off, > > + .owner = THIS_MODULE, > > +}; > > + > > +static int exynos_dp_video_phy_probe(struct platform_device *pdev) > > +{ > > + struct exynos_dp_video_phy *state; > > + struct device *dev = &pdev->dev; > > + struct resource *res; > > + struct phy_provider *phy_provider; > > + > > + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); > > + if (!state) > > + return -ENOMEM; > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + > > + state->regs = devm_ioremap_resource(dev, res); > > + if (IS_ERR(state->regs)) > > + return PTR_ERR(state->regs); > > + > > + dev_set_drvdata(dev, state); > > + > > + phy_provider = devm_of_phy_provider_register(dev, > > + exynos_dp_video_phy_xlate); > > + if (IS_ERR(phy_provider)) > > + return PTR_ERR(phy_provider); > > + > > + state->phys = devm_phy_create(dev, 0, &exynos_dp_video_phy_ops, "dp"); > > + if (IS_ERR(state->phys)) { > > + dev_err(dev, "failed to create DP PHY\n"); > > + return PTR_ERR(state->phys); > > + } > > + phy_set_drvdata(state->phys, state); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id exynos_dp_video_phy_of_match[] = { > > + { .compatible = "samsung,exynos5250-dp-video-phy" }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); > > This above should come inside #ifdef CONFIG_OF. OK, I will add '#ifdef CONFIG_OF'. > > + > > +static struct platform_driver exynos_dp_video_phy_driver = { > > + .probe = exynos_dp_video_phy_probe, > > missing .remove? No, it is intentional. In the exynos_dp_video_phy_probe(), only devm_*() are called as below. devm_kzalloc(), devm_ioremap_resource(), devm_of_phy_provider_register(), devm_phy_create(), Also, dev_set_drvdata(dev, NULL), phy_set_drvdata(state->phys, NULL) are not necessary in remove(), because driver core clears automatically after device_release. Thus, there is no functions in the remove(). Thank you for your comment. :) It is very helpful. Best regards, Jingoo Han > > + .driver = { > > + .of_match_table = exynos_dp_video_phy_of_match, > > + .name = "exynos-dp-video-phy", > > + .owner = THIS_MODULE, > > + } > > +}; > > +module_platform_driver(exynos_dp_video_phy_driver); > > + > > +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); > > +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); > > +MODULE_LICENSE("GPL v2"); > > Thanks > Kishon
Hi, On Friday 28 June 2013 11:24 AM, Jingoo Han wrote: > On Friday, June 28, 2013 2:31 PM, Kishon Vijay Abraham I wrote: >> >> Hi, >> >> On Friday 28 June 2013 10:52 AM, Jingoo Han wrote: >>> Add a PHY provider driver for the Samsung Exynos SoC DP PHY. >>> >>> Signed-off-by: Jingoo Han <jg1.han@samsung.com> >>> --- >>> .../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++ >>> drivers/phy/Kconfig | 8 ++ >>> drivers/phy/Makefile | 3 +- >>> drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++ >>> 4 files changed, 147 insertions(+), 1 deletion(-) >>> create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt >>> create mode 100644 drivers/phy/phy-exynos-dp-video.c >>> >>> diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt >>> b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt >>> new file mode 100644 >>> index 0000000..8b6fa79 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt >>> @@ -0,0 +1,7 @@ >>> +Samsung EXYNOS SoC series DP PHY >>> +------------------------------------------------- >>> + >>> +Required properties: >>> +- compatible : should be "samsung,exynos5250-dp-video-phy"; >>> +- reg : offset and length of the DP PHY register set; >>> +- #phy-cells : from the generic phy bindings, must be 1; >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index 5f85909..6d10e3b 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -11,3 +11,11 @@ menuconfig GENERIC_PHY >>> devices present in the kernel. This layer will have the generic >>> API by which phy drivers can create PHY using the phy framework and >>> phy users can obtain reference to the PHY. >>> + >>> +if GENERIC_PHY >>> + >>> +config PHY_EXYNOS_DP_VIDEO >>> + tristate "EXYNOS SoC series DP PHY driver" >>> + help >>> + Support for DP PHY found on Samsung EXYNOS SoCs. >>> +endif >>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile >>> index 9e9560f..d8d861c 100644 >>> --- a/drivers/phy/Makefile >>> +++ b/drivers/phy/Makefile >>> @@ -2,4 +2,5 @@ >>> # Makefile for the phy drivers. >>> # >>> >>> -obj-$(CONFIG_GENERIC_PHY) += phy-core.o >>> +obj-$(CONFIG_GENERIC_PHY) += phy-core.o >>> +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o >>> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c >>> new file mode 100644 >>> index 0000000..376b3bc2 >>> --- /dev/null >>> +++ b/drivers/phy/phy-exynos-dp-video.c >>> @@ -0,0 +1,130 @@ >>> +/* >>> + * Samsung EXYNOS SoC series DP PHY driver >>> + * >>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd. >>> + * Author: Jingoo Han <jg1.han@samsung.com> >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License version 2 as >>> + * published by the Free Software Foundation. >>> + */ >>> + >>> +#include <linux/delay.h> >> >> this header file is not needed here. > > OK, I will remove it. > >> >>> +#include <linux/io.h> >>> +#include <linux/kernel.h> >>> +#include <linux/module.h> >>> +#include <linux/of.h> >>> +#include <linux/of_address.h> >>> +#include <linux/phy/phy.h> >>> +#include <linux/platform_device.h> >>> +#include <linux/spinlock.h> >>> + >>> +/* DPTX_PHY_CONTROL register */ >>> +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) >>> + >>> +struct exynos_dp_video_phy { >>> + spinlock_t slock; >>> + struct phy *phys; >>> + void __iomem *regs; >>> +}; >>> + >>> +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) >>> +{ >>> + void __iomem *addr; >>> + unsigned long flags; >>> + u32 reg; >>> + >>> + addr = state->regs; >>> + >>> + spin_lock_irqsave(&state->slock, flags); >>> + reg = readl(addr); >>> + if (on) >>> + reg |= EXYNOS_DPTX_PHY_ENABLE; >>> + else >>> + reg &= ~EXYNOS_DPTX_PHY_ENABLE; >>> + writel(reg, addr); >>> + spin_unlock_irqrestore(&state->slock, flags); >>> + return 0; >>> +} >>> + >>> +static int exynos_dp_video_phy_power_on(struct phy *phy) >>> +{ >>> + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); >>> + >>> + return __set_phy_state(state, 1); >>> +} >>> + >>> +static int exynos_dp_video_phy_power_off(struct phy *phy) >>> +{ >>> + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); >>> + >>> + return __set_phy_state(state, 0); >>> +} >>> + >>> +static struct phy *exynos_dp_video_phy_xlate(struct device *dev, >>> + struct of_phandle_args *args) >>> +{ >>> + struct exynos_dp_video_phy *state = dev_get_drvdata(dev); >>> + >>> + return state->phys; >> >> you can instead use of_phy_simple_xlate for such simple cases. > > OK, I will use of_phy_simple_xlate(). > >>> +} >>> + >>> +static struct phy_ops exynos_dp_video_phy_ops = { >>> + .power_on = exynos_dp_video_phy_power_on, >>> + .power_off = exynos_dp_video_phy_power_off, >>> + .owner = THIS_MODULE, >>> +}; >>> + >>> +static int exynos_dp_video_phy_probe(struct platform_device *pdev) >>> +{ >>> + struct exynos_dp_video_phy *state; >>> + struct device *dev = &pdev->dev; >>> + struct resource *res; >>> + struct phy_provider *phy_provider; >>> + >>> + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); >>> + if (!state) >>> + return -ENOMEM; >>> + >>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> + >>> + state->regs = devm_ioremap_resource(dev, res); >>> + if (IS_ERR(state->regs)) >>> + return PTR_ERR(state->regs); >>> + >>> + dev_set_drvdata(dev, state); >>> + >>> + phy_provider = devm_of_phy_provider_register(dev, >>> + exynos_dp_video_phy_xlate); >>> + if (IS_ERR(phy_provider)) >>> + return PTR_ERR(phy_provider); >>> + >>> + state->phys = devm_phy_create(dev, 0, &exynos_dp_video_phy_ops, "dp"); >>> + if (IS_ERR(state->phys)) { >>> + dev_err(dev, "failed to create DP PHY\n"); >>> + return PTR_ERR(state->phys); >>> + } >>> + phy_set_drvdata(state->phys, state); >>> + >>> + return 0; >>> +} >>> + >>> +static const struct of_device_id exynos_dp_video_phy_of_match[] = { >>> + { .compatible = "samsung,exynos5250-dp-video-phy" }, >>> + { }, >>> +}; >>> +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); >> >> This above should come inside #ifdef CONFIG_OF. > > OK, I will add '#ifdef CONFIG_OF'. > >>> + >>> +static struct platform_driver exynos_dp_video_phy_driver = { >>> + .probe = exynos_dp_video_phy_probe, >> >> missing .remove? > > No, it is intentional. > > In the exynos_dp_video_phy_probe(), only devm_*() are called as below. > devm_kzalloc(), > devm_ioremap_resource(), > devm_of_phy_provider_register(), > devm_phy_create(), > > Also, dev_set_drvdata(dev, NULL), phy_set_drvdata(state->phys, NULL) > are not necessary in remove(), because driver core clears automatically > after device_release. > > Thus, there is no functions in the remove(). Looks correct. Alright then. Thanks Kishon
Hi, On Friday 28 June 2013 10:52 AM, Jingoo Han wrote: > Add a PHY provider driver for the Samsung Exynos SoC DP PHY. > > Signed-off-by: Jingoo Han <jg1.han@samsung.com> > --- > .../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++ > drivers/phy/Kconfig | 8 ++ > drivers/phy/Makefile | 3 +- > drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++ > 4 files changed, 147 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > create mode 100644 drivers/phy/phy-exynos-dp-video.c > > diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > new file mode 100644 > index 0000000..8b6fa79 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt How about creating a single Documentation file for all samsung video phys? Sylwester? Thanks Kishon
Hi, On 06/28/2013 11:31 AM, Kishon Vijay Abraham I wrote: >> diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt >> b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt >> new file mode 100644 >> index 0000000..8b6fa79 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt > > How about creating a single Documentation file for all samsung video phys? > Sylwester? Yes, makes sense. There are quite a few various PHYs on the Exynos SoC. Let me resend my series with the binding description file name changed to samsung-phy.txt. I need to add couple fixes to that series anyway. Regards, Sylwester
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt new file mode 100644 index 0000000..8b6fa79 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt @@ -0,0 +1,7 @@ +Samsung EXYNOS SoC series DP PHY +------------------------------------------------- + +Required properties: +- compatible : should be "samsung,exynos5250-dp-video-phy"; +- reg : offset and length of the DP PHY register set; +- #phy-cells : from the generic phy bindings, must be 1; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 5f85909..6d10e3b 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -11,3 +11,11 @@ menuconfig GENERIC_PHY devices present in the kernel. This layer will have the generic API by which phy drivers can create PHY using the phy framework and phy users can obtain reference to the PHY. + +if GENERIC_PHY + +config PHY_EXYNOS_DP_VIDEO + tristate "EXYNOS SoC series DP PHY driver" + help + Support for DP PHY found on Samsung EXYNOS SoCs. +endif diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 9e9560f..d8d861c 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -2,4 +2,5 @@ # Makefile for the phy drivers. # -obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c new file mode 100644 index 0000000..376b3bc2 --- /dev/null +++ b/drivers/phy/phy-exynos-dp-video.c @@ -0,0 +1,130 @@ +/* + * Samsung EXYNOS SoC series DP PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +/* DPTX_PHY_CONTROL register */ +#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) + +struct exynos_dp_video_phy { + spinlock_t slock; + struct phy *phys; + void __iomem *regs; +}; + +static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) +{ + void __iomem *addr; + unsigned long flags; + u32 reg; + + addr = state->regs; + + spin_lock_irqsave(&state->slock, flags); + reg = readl(addr); + if (on) + reg |= EXYNOS_DPTX_PHY_ENABLE; + else + reg &= ~EXYNOS_DPTX_PHY_ENABLE; + writel(reg, addr); + spin_unlock_irqrestore(&state->slock, flags); + return 0; +} + +static int exynos_dp_video_phy_power_on(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + return __set_phy_state(state, 1); +} + +static int exynos_dp_video_phy_power_off(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + return __set_phy_state(state, 0); +} + +static struct phy *exynos_dp_video_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos_dp_video_phy *state = dev_get_drvdata(dev); + + return state->phys; +} + +static struct phy_ops exynos_dp_video_phy_ops = { + .power_on = exynos_dp_video_phy_power_on, + .power_off = exynos_dp_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_dp_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_dp_video_phy *state; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + state->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + + dev_set_drvdata(dev, state); + + phy_provider = devm_of_phy_provider_register(dev, + exynos_dp_video_phy_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + state->phys = devm_phy_create(dev, 0, &exynos_dp_video_phy_ops, "dp"); + if (IS_ERR(state->phys)) { + dev_err(dev, "failed to create DP PHY\n"); + return PTR_ERR(state->phys); + } + phy_set_drvdata(state->phys, state); + + return 0; +} + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { .compatible = "samsung,exynos5250-dp-video-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + +static struct platform_driver exynos_dp_video_phy_driver = { + .probe = exynos_dp_video_phy_probe, + .driver = { + .of_match_table = exynos_dp_video_phy_of_match, + .name = "exynos-dp-video-phy", + .owner = THIS_MODULE, + } +}; +module_platform_driver(exynos_dp_video_phy_driver); + +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_LICENSE("GPL v2");
Add a PHY provider driver for the Samsung Exynos SoC DP PHY. Signed-off-by: Jingoo Han <jg1.han@samsung.com> --- .../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++ drivers/phy/Kconfig | 8 ++ drivers/phy/Makefile | 3 +- drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++ 4 files changed, 147 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt create mode 100644 drivers/phy/phy-exynos-dp-video.c