diff mbox

[PATCHv3,4/8] ARM: mxs: dt: cfa10036: make hogpins grabbed by respective drivers

Message ID 1372424577-8279-5-git-send-email-alexandre.belloni@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alexandre Belloni June 28, 2013, 1:02 p.m. UTC
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/imx28-cfa10036.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Comments

Maxime Ripard June 29, 2013, 7 a.m. UTC | #1
On Fri, Jun 28, 2013 at 03:02:53PM +0200, Alexandre Belloni wrote:
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 94c4476..1ec8c94 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -23,10 +23,7 @@ 
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_cfa10036>;
-
-				hog_pins_cfa10036: hog-10036@0 {
+				ssd1306_cfa10036: ssd1306-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
@@ -83,6 +80,8 @@ 
 
 				ssd1306: oled@3c {
 					compatible = "solomon,ssd1306fb-i2c";
+					pinctrl-names = "default";
+					pinctrl-0 = <&ssd1306_cfa10036>;
 					reg = <0x3c>;
 					reset-gpios = <&gpio2 7 0>;
 					solomon,height = <32>;