Message ID | 1372755849-19546-3-git-send-email-voice.shen@atmel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 07/02/2013 11:04 AM, Bo Shen wrote: [...] > -/*--------------------------------------------------------------------------*\ > - * DMAENGINE operations > -\*--------------------------------------------------------------------------*/ > -static bool filter(struct dma_chan *chan, void *slave) > -{ > - struct at_dma_slave *sl = slave; > - > - if (sl->dma_dev == chan->device->dev) { > - chan->private = sl; > - return true; > - } else { > - return false; > - } > -} I'm wondering why is filtering no longer required? [...] > + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; [...] > + slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; Change the type of phybase to dma_addr_t [...] > } > > -static int atmel_pcm_dma_prepare(struct snd_pcm_substream *substream) > -{ > - struct snd_soc_pcm_runtime *rtd = substream->private_data; > - struct atmel_pcm_dma_params *prtd; > - > - prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); > - > - ssc_writex(prtd->ssc->regs, SSC_IER, prtd->mask->ssc_error); > - ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_enable); These writes are also completely lost > - > - return 0; > -} I think it would also be good to get rid of any references to the ssc struct from the DMA driver and move them over to the DAI driver. - Lars
Hi Lars-Peter, On 7/2/2013 23:34, Lars-Peter Clausen wrote: > On 07/02/2013 11:04 AM, Bo Shen wrote: > [...] >> -/*--------------------------------------------------------------------------*\ >> - * DMAENGINE operations >> -\*--------------------------------------------------------------------------*/ >> -static bool filter(struct dma_chan *chan, void *slave) >> -{ >> - struct at_dma_slave *sl = slave; >> - >> - if (sl->dma_dev == chan->device->dev) { >> - chan->private = sl; >> - return true; >> - } else { >> - return false; >> - } >> -} > > I'm wondering why is filtering no longer required? Now this is handled by at_dma_filter in at_hdmac driver. More information, you can reference: <driver/dma/at_hdmac.c> file > [...] >> + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; > [...] >> + slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; > > Change the type of phybase to dma_addr_t It should be: slave_config->dst_addr = (dma_addr_t)(ssc->phybase + SSC_THR); slave_config->src_addr = (dma_addr_t)(ssc->phybase + SSC_RHR); > [...] >> } >> >> -static int atmel_pcm_dma_prepare(struct snd_pcm_substream *substream) >> -{ >> - struct snd_soc_pcm_runtime *rtd = substream->private_data; >> - struct atmel_pcm_dma_params *prtd; >> - >> - prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); >> - >> - ssc_writex(prtd->ssc->regs, SSC_IER, prtd->mask->ssc_error); >> - ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_enable); > > These writes are also completely lost This will be moved to DAI driver startup callback function. >> - >> - return 0; >> -} > > I think it would also be good to get rid of any references to the ssc struct > from the DMA driver and move them over to the DAI driver. I will try to implement this in next version patch. Thanks. > - Lars > Best Regards, Bo Shen
On 07/03/2013 03:33 AM, Bo Shen wrote: > Hi Lars-Peter, > > On 7/2/2013 23:34, Lars-Peter Clausen wrote: >> On 07/02/2013 11:04 AM, Bo Shen wrote: >> [...] >>> -/*--------------------------------------------------------------------------*\ >>> - * DMAENGINE operations >>> -\*--------------------------------------------------------------------------*/ >>> -static bool filter(struct dma_chan *chan, void *slave) >>> -{ >>> - struct at_dma_slave *sl = slave; >>> - >>> - if (sl->dma_dev == chan->device->dev) { >>> - chan->private = sl; >>> - return true; >>> - } else { >>> - return false; >>> - } >>> -} >> >> I'm wondering why is filtering no longer required? > > Now this is handled by at_dma_filter in at_hdmac driver. More information, you > can reference: <driver/dma/at_hdmac.c> file Ok, so the DMA channel is now supplied via devicetree. This is really a change that should be listed in the changelog. > >> [...] >>> + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; >> [...] >>> + slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; >> >> Change the type of phybase to dma_addr_t > > It should be: > slave_config->dst_addr = (dma_addr_t)(ssc->phybase + SSC_THR); > slave_config->src_addr = (dma_addr_t)(ssc->phybase + SSC_RHR); The type of phybase in the ssc_device struct should be changed from resource_size_t to dma_addr_t.
Hi Lars, On 7/3/2013 15:36, Lars-Peter Clausen wrote: >>>> + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; >>> >>[...] >>>> >>>+ slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; >>> >> >>> >>Change the type of phybase to dma_addr_t >> > >> >It should be: >> >slave_config->dst_addr = (dma_addr_t)(ssc->phybase + SSC_THR); >> >slave_config->src_addr = (dma_addr_t)(ssc->phybase + SSC_RHR); > The type of phybase in the ssc_device struct should be changed from > resource_size_t to dma_addr_t. Actually, the phybase in ssc_device structure is resource_size_t which used to access the ssc device register. Here, we use ssc register as dma source address or destination address, so we convert it to dma_addr_t type. So, not need to change, am I right? Best Regards, Bo Shen
On 07/03/2013 09:57 AM, Bo Shen wrote: > Hi Lars, > > On 7/3/2013 15:36, Lars-Peter Clausen wrote: >>>>> + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; >>>> >>[...] >>>>> >>>+ slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; >>>> >> >>>> >>Change the type of phybase to dma_addr_t >>> > >>> >It should be: >>> >slave_config->dst_addr = (dma_addr_t)(ssc->phybase + SSC_THR); >>> >slave_config->src_addr = (dma_addr_t)(ssc->phybase + SSC_RHR); >> The type of phybase in the ssc_device struct should be changed from >> resource_size_t to dma_addr_t. > > Actually, the phybase in ssc_device structure is resource_size_t which used to > access the ssc device register. > Here, we use ssc register as dma source address or destination address, so we > convert it to dma_addr_t type. So, not need to change, am I right? Isn't 'regs' used to access the registers? As far as I can see phybase is only used in the audio DMA driver. - Lars
Hi Lars, On 7/3/2013 16:08, Lars-Peter Clausen wrote: > On 07/03/2013 09:57 AM, Bo Shen wrote: >> Hi Lars, >> >> On 7/3/2013 15:36, Lars-Peter Clausen wrote: >>>>>> + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; >>>>>>> [...] >>>>>>>>> + slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; >>>>>>> >>>>>>> Change the type of phybase to dma_addr_t >>>>> >>>>> It should be: >>>>> slave_config->dst_addr = (dma_addr_t)(ssc->phybase + SSC_THR); >>>>> slave_config->src_addr = (dma_addr_t)(ssc->phybase + SSC_RHR); >>> The type of phybase in the ssc_device struct should be changed from >>> resource_size_t to dma_addr_t. >> >> Actually, the phybase in ssc_device structure is resource_size_t which used to >> access the ssc device register. >> Here, we use ssc register as dma source address or destination address, so we >> convert it to dma_addr_t type. So, not need to change, am I right? > > Isn't 'regs' used to access the registers? As far as I can see phybase is only > used in the audio DMA driver. Thanks for point out this. I will change the phybase type from resource_size_t to dma_addr_t. > - Lars > Best Regards, Bo Shen
diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c index 1d38fd0..0f6c701 100644 --- a/sound/soc/atmel/atmel-pcm-dma.c +++ b/sound/soc/atmel/atmel-pcm-dma.c @@ -89,138 +89,52 @@ static void atmel_pcm_dma_irq(u32 ssc_sr, } } -/*--------------------------------------------------------------------------*\ - * DMAENGINE operations -\*--------------------------------------------------------------------------*/ -static bool filter(struct dma_chan *chan, void *slave) -{ - struct at_dma_slave *sl = slave; - - if (sl->dma_dev == chan->device->dev) { - chan->private = sl; - return true; - } else { - return false; - } -} - static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, struct atmel_pcm_dma_params *prtd) + struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct atmel_pcm_dma_params *prtd; struct ssc_device *ssc; - struct dma_chan *dma_chan; - struct dma_slave_config slave_config; int ret; + prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); ssc = prtd->ssc; - ret = snd_hwparams_to_dma_slave_config(substream, params, - &slave_config); + ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config); if (ret) { pr_err("atmel-pcm: hwparams to dma slave configure failed\n"); return ret; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - slave_config.dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; - slave_config.dst_maxburst = 1; + slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; + slave_config->dst_maxburst = 1; } else { - slave_config.src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; - slave_config.src_maxburst = 1; - } - - dma_chan = snd_dmaengine_pcm_get_chan(substream); - if (dmaengine_slave_config(dma_chan, &slave_config)) { - pr_err("atmel-pcm: failed to configure dma channel\n"); - ret = -EBUSY; - return ret; - } - - return 0; -} - -static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct atmel_pcm_dma_params *prtd; - struct ssc_device *ssc; - struct at_dma_slave *sdata = NULL; - int ret; - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - - prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - ssc = prtd->ssc; - if (ssc->pdev) - sdata = ssc->pdev->dev.platform_data; - - ret = snd_dmaengine_pcm_open_request_chan(substream, filter, sdata); - if (ret) { - pr_err("atmel-pcm: dmaengine pcm open failed\n"); - return -EINVAL; - } - - ret = atmel_pcm_configure_dma(substream, params, prtd); - if (ret) { - pr_err("atmel-pcm: failed to configure dmai\n"); - goto err; + slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; + slave_config->src_maxburst = 1; } prtd->dma_intr_handler = atmel_pcm_dma_irq; return 0; -err: - snd_dmaengine_pcm_close_release_chan(substream); - return ret; } -static int atmel_pcm_dma_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct atmel_pcm_dma_params *prtd; - - prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - ssc_writex(prtd->ssc->regs, SSC_IER, prtd->mask->ssc_error); - ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_enable); - - return 0; -} - -static int atmel_pcm_open(struct snd_pcm_substream *substream) -{ - snd_soc_set_runtime_hwparams(substream, &atmel_pcm_dma_hardware); - - return 0; -} - -static struct snd_pcm_ops atmel_pcm_ops = { - .open = atmel_pcm_open, - .close = snd_dmaengine_pcm_close_release_chan, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = atmel_pcm_hw_params, - .prepare = atmel_pcm_dma_prepare, - .trigger = snd_dmaengine_pcm_trigger, - .pointer = snd_dmaengine_pcm_pointer_no_residue, - .mmap = atmel_pcm_mmap, -}; - -static struct snd_soc_platform_driver atmel_soc_platform = { - .ops = &atmel_pcm_ops, - .pcm_new = atmel_pcm_new, - .pcm_free = atmel_pcm_free, +static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = { + .prepare_slave_config = atmel_pcm_configure_dma, + .pcm_hardware = &atmel_pcm_dma_hardware, + .prealloc_buffer_size = ATMEL_SSC_DMABUF_SIZE, }; int atmel_pcm_dma_platform_register(struct device *dev) { - return snd_soc_register_platform(dev, &atmel_soc_platform); + return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); } EXPORT_SYMBOL(atmel_pcm_dma_platform_register); void atmel_pcm_dma_platform_unregister(struct device *dev) { - snd_soc_unregister_platform(dev); + snd_dmaengine_pcm_unregister(dev); } EXPORT_SYMBOL(atmel_pcm_dma_platform_unregister);
Align atmel pcm to use ASoC generic dmaengine framework Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/atmel-pcm-dma.c | 118 ++++++--------------------------------- 1 file changed, 16 insertions(+), 102 deletions(-)