| Message ID | 1372714599-17588-3-git-send-email-broonie@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jul 1, 2013 at 6:36 PM, Mark Brown <broonie@kernel.org> wrote: > i2c@12C90000 { > - status = "disabled"; > + wm1811a@11 { > + compatible = "wlf,wm1811"; > + reg = <0x1a>; Shouldn't it be reg = <0x11> ? Or wm1811a@1a ? -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jul 01, 2013 at 06:47:00PM -0300, Fabio Estevam wrote: > On Mon, Jul 1, 2013 at 6:36 PM, Mark Brown <broonie@kernel.org> wrote: > > i2c@12C90000 { > > - status = "disabled"; > > + wm1811a@11 { > > + compatible = "wlf,wm1811"; > > + reg = <0x1a>; > Shouldn't it be reg = <0x11> ? Or wm1811a@1a ? The @ should change. Though since it's one of the bits of ornamental noise DT has rules for :/
On 07/02/2013 03:06 AM, Mark Brown wrote: > From: Mark Brown <broonie@linaro.org> > > The default audio module for the Arndale has a WM811A on it. Add this to typo: WM1811A Arndale board also comes with two other audio codec boards - ALC5631Q and AK4678. Different audio codec boards came with different shipments. > the device tree bindings. > > Signed-off-by: Mark Brown <broonie@linaro.org> > --- > arch/arm/boot/dts/exynos5250-arndale.dts | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts > index 482f275..75c3065 100644 > --- a/arch/arm/boot/dts/exynos5250-arndale.dts > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts > @@ -325,7 +325,22 @@ > }; > > i2c@12C90000 { > - status = "disabled"; > + wm1811a@11 { > + compatible = "wlf,wm1811"; > + reg = <0x1a>; > + > + AVDD2-supply = <&main_dc_reg>; > + CPVDD-supply = <&main_dc_reg>; > + DBVDD1-supply = <&main_dc_reg>; > + DBVDD2-supply = <&main_dc_reg>; > + DBVDD3-supply = <&main_dc_reg>; > + LDO1VDD-supply = <&main_dc_reg>; > + SPKVDD1-supply = <&main_dc_reg>; > + SPKVDD2-supply = <&main_dc_reg>; > + > + wlf,ldo1ena = <&gpb0 0 0>; > + wlf,ldo2ena = <&gpb0 1 0>; > + }; > }; > > i2c@12CA0000 { >
On Tue, Jul 02, 2013 at 10:51:36AM +0530, Tushar Behera wrote: > Arndale board also comes with two other audio codec boards - ALC5631Q > and AK4678. Different audio codec boards came with different shipments. This is the default though and since they didn't bother providing any way of identifying the modules we just have to put them all in the device tree and hope that the individual CODEC drivers can do runtime identification (the WM1811A can but I don't know about the other two, nobody supported them upstream).
Mark Brown wrote: > > On Tue, Jul 02, 2013 at 10:51:36AM +0530, Tushar Behera wrote: > > > Arndale board also comes with two other audio codec boards - ALC5631Q > > and AK4678. Different audio codec boards came with different shipments. > > This is the default though and since they didn't bother providing any > way of identifying the modules we just have to put them all in the > device tree and hope that the individual CODEC drivers can do runtime > identification (the WM1811A can but I don't know about the other two, > nobody supported them upstream). Basically, I agree with Mark Brown's opinion, at this moment would be better if upstreamed WM1811A could be supported on Arndale and if further supporting of two codecs is required, we could discuss again next time. And they should be identified in the kernel at runtime. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 482f275..75c3065 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -325,7 +325,22 @@ }; i2c@12C90000 { - status = "disabled"; + wm1811a@11 { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 0>; + wlf,ldo2ena = <&gpb0 1 0>; + }; }; i2c@12CA0000 {