Message ID | 1374679132-30672-2-git-send-email-ljalvs@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 07/24/2013 06:18 PM, Luis Alves wrote: > v4: > Patch order fixed. > Changed some msleep's to clear checkpatch warnings. > > > Signed-off-by: Luis Alves <ljalvs@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> > --- > drivers/media/pci/cx23885/Kconfig | 1 + > drivers/media/pci/cx23885/cx23885-cards.c | 67 +++++++++++++++++++++++++++++ > drivers/media/pci/cx23885/cx23885-dvb.c | 31 +++++++++++++ > drivers/media/pci/cx23885/cx23885-input.c | 12 ++++++ > drivers/media/pci/cx23885/cx23885.h | 2 + > 5 files changed, 113 insertions(+) > > diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig > index b3688aa..91b2ed7 100644 > --- a/drivers/media/pci/cx23885/Kconfig > +++ b/drivers/media/pci/cx23885/Kconfig > @@ -23,6 +23,7 @@ config VIDEO_CX23885 > select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT > select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT > select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT > + select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT > select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT > select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT > select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT > diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c > index 7e923f8..7ecd3fb 100644 > --- a/drivers/media/pci/cx23885/cx23885-cards.c > +++ b/drivers/media/pci/cx23885/cx23885-cards.c > @@ -259,6 +259,16 @@ struct cx23885_board cx23885_boards[] = { > .name = "TurboSight TBS 6920", > .portb = CX23885_MPEG_DVB, > }, > + [CX23885_BOARD_TBS_6980] = { > + .name = "TurboSight TBS 6980", > + .portb = CX23885_MPEG_DVB, > + .portc = CX23885_MPEG_DVB, > + }, > + [CX23885_BOARD_TBS_6981] = { > + .name = "TurboSight TBS 6981", > + .portb = CX23885_MPEG_DVB, > + .portc = CX23885_MPEG_DVB, > + }, > [CX23885_BOARD_TEVII_S470] = { > .name = "TeVii S470", > .portb = CX23885_MPEG_DVB, > @@ -698,6 +708,14 @@ struct cx23885_subid cx23885_subids[] = { > .subdevice = 0x8888, > .card = CX23885_BOARD_TBS_6920, > }, { > + .subvendor = 0x6980, > + .subdevice = 0x8888, > + .card = CX23885_BOARD_TBS_6980, > + }, { > + .subvendor = 0x6981, > + .subdevice = 0x8888, > + .card = CX23885_BOARD_TBS_6981, > + }, { > .subvendor = 0xd470, > .subdevice = 0x9022, > .card = CX23885_BOARD_TEVII_S470, > @@ -1022,6 +1040,35 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) > dev->name, tv.model); > } > > +/* Some TBS cards require initing a chip using a bitbanged SPI attached > + to the cx23885 gpio's. If this chip doesn't get init'ed the demod > + doesn't respond to any command. */ > +static void tbs_card_init(struct cx23885_dev *dev) > +{ > + int i; > + const u8 buf[] = { > + 0xe0, 0x06, 0x66, 0x33, 0x65, > + 0x01, 0x17, 0x06, 0xde}; > + > + switch (dev->board) { > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > + cx_set(GP0_IO, 0x00070007); > + usleep_range(1000, 10000); > + cx_clear(GP0_IO, 2); > + usleep_range(1000, 10000); > + for (i = 0; i < 9 * 8; i++) { > + cx_clear(GP0_IO, 7); > + usleep_range(1000, 10000); > + cx_set(GP0_IO, > + ((buf[i >> 3] >> (7 - (i & 7))) & 1) | 4); > + usleep_range(1000, 10000); > + } > + cx_set(GP0_IO, 7); > + break; > + } > +} > + > int cx23885_tuner_callback(void *priv, int component, int command, int arg) > { > struct cx23885_tsport *port = priv; > @@ -1224,6 +1271,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) > cx_set(GP0_IO, 0x00040004); > break; > case CX23885_BOARD_TBS_6920: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > case CX23885_BOARD_PROF_8000: > cx_write(MC417_CTL, 0x00000036); > cx_write(MC417_OEN, 0x00001000); > @@ -1472,6 +1521,8 @@ int cx23885_ir_init(struct cx23885_dev *dev) > case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_MYGICA_X8507: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > if (!enable_885_ir) > break; > dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); > @@ -1515,6 +1566,8 @@ void cx23885_ir_fini(struct cx23885_dev *dev) > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > case CX23885_BOARD_MYGICA_X8507: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > cx23885_irq_remove(dev, PCI_MSK_AV_CORE); > /* sd_ir is a duplicate pointer to the AV Core, just clear it */ > dev->sd_ir = NULL; > @@ -1560,6 +1613,8 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > case CX23885_BOARD_MYGICA_X8507: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > if (dev->sd_ir) > cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); > break; > @@ -1675,6 +1730,16 @@ void cx23885_card_setup(struct cx23885_dev *dev) > ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > break; > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ > + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ > + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ > + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; > + tbs_card_init(dev); > + break; > case CX23885_BOARD_MYGICA_X8506: > case CX23885_BOARD_MAGICPRO_PROHDTVE2: > ts1->gen_ctrl_val = 0x5; /* Parallel */ > @@ -1750,6 +1815,8 @@ void cx23885_card_setup(struct cx23885_dev *dev) > case CX23885_BOARD_MYGICA_X8507: > case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: > case CX23885_BOARD_AVERMEDIA_HC81R: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, > &dev->i2c_bus[2].i2c_adap, > "cx25840", 0x88 >> 1, NULL); > diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c > index 9c5ed10..bfb7e33 100644 > --- a/drivers/media/pci/cx23885/cx23885-dvb.c > +++ b/drivers/media/pci/cx23885/cx23885-dvb.c > @@ -51,6 +51,7 @@ > #include "stv6110.h" > #include "lnbh24.h" > #include "cx24116.h" > +#include "cx24117.h" > #include "cimax2.h" > #include "lgs8gxx.h" > #include "netup-eeprom.h" > @@ -468,6 +469,10 @@ static struct cx24116_config tbs_cx24116_config = { > .demod_address = 0x55, > }; > > +static struct cx24117_config tbs_cx24117_config = { > + .demod_address = 0x55, > +}; > + > static struct ds3000_config tevii_ds3000_config = { > .demod_address = 0x68, > }; > @@ -1027,6 +1032,32 @@ static int dvb_register(struct cx23885_tsport *port) > fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; > > break; > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > + i2c_bus = &dev->i2c_bus[1]; > + > + switch (port->nr) { > + /* PORT B */ > + case 1: > + fe0->dvb.frontend = dvb_attach(cx24117_attach, > + &tbs_cx24117_config, > + &i2c_bus->i2c_adap, NULL); > + break; > + /* PORT C */ > + case 2: > + /* use fe1 pointer as temporary holder */ > + /* for the first frontend */ > + fe1 = videobuf_dvb_get_frontend( > + &port->dev->ts1.frontends, 1); > + > + fe0->dvb.frontend = dvb_attach(cx24117_attach, > + &tbs_cx24117_config, > + &i2c_bus->i2c_adap, fe1->dvb.frontend); > + /* we're done, so clear fe1 pointer */ > + fe1 = NULL; > + break; > + } > + break; > case CX23885_BOARD_TEVII_S470: > i2c_bus = &dev->i2c_bus[1]; > > diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c > index 7875dfb..8a49e7c 100644 > --- a/drivers/media/pci/cx23885/cx23885-input.c > +++ b/drivers/media/pci/cx23885/cx23885-input.c > @@ -90,6 +90,8 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) > case CX23885_BOARD_TEVII_S470: > case CX23885_BOARD_HAUPPAUGE_HVR1250: > case CX23885_BOARD_MYGICA_X8507: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > /* > * The only boards we handle right now. However other boards > * using the CX2388x integrated IR controller should be similar > @@ -168,6 +170,8 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev) > break; > case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: > case CX23885_BOARD_TEVII_S470: > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > /* > * The IR controller on this board only returns pulse widths. > * Any other mode setting will fail to set up the device. > @@ -298,6 +302,14 @@ int cx23885_input_init(struct cx23885_dev *dev) > /* A guess at the remote */ > rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02; > break; > + case CX23885_BOARD_TBS_6980: > + case CX23885_BOARD_TBS_6981: > + /* Integrated CX23885 IR controller */ > + driver_type = RC_DRIVER_IR_RAW; > + allowed_protos = RC_BIT_ALL; > + /* A guess at the remote */ > + rc_map = RC_MAP_TBS_NEC; > + break; > default: > return -ENODEV; > } > diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h > index 5687d3f..ebcc63e 100644 > --- a/drivers/media/pci/cx23885/cx23885.h > +++ b/drivers/media/pci/cx23885/cx23885.h > @@ -93,6 +93,8 @@ > #define CX23885_BOARD_PROF_8000 37 > #define CX23885_BOARD_HAUPPAUGE_HVR4400 38 > #define CX23885_BOARD_AVERMEDIA_HC81R 39 > +#define CX23885_BOARD_TBS_6981 40 > +#define CX23885_BOARD_TBS_6980 41 > > #define GPIO_0 0x00000001 > #define GPIO_1 0x00000002 >
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig index b3688aa..91b2ed7 100644 --- a/drivers/media/pci/cx23885/Kconfig +++ b/drivers/media/pci/cx23885/Kconfig @@ -23,6 +23,7 @@ config VIDEO_CX23885 select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 7e923f8..7ecd3fb 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -259,6 +259,16 @@ struct cx23885_board cx23885_boards[] = { .name = "TurboSight TBS 6920", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_TBS_6980] = { + .name = "TurboSight TBS 6980", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TBS_6981] = { + .name = "TurboSight TBS 6981", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, [CX23885_BOARD_TEVII_S470] = { .name = "TeVii S470", .portb = CX23885_MPEG_DVB, @@ -698,6 +708,14 @@ struct cx23885_subid cx23885_subids[] = { .subdevice = 0x8888, .card = CX23885_BOARD_TBS_6920, }, { + .subvendor = 0x6980, + .subdevice = 0x8888, + .card = CX23885_BOARD_TBS_6980, + }, { + .subvendor = 0x6981, + .subdevice = 0x8888, + .card = CX23885_BOARD_TBS_6981, + }, { .subvendor = 0xd470, .subdevice = 0x9022, .card = CX23885_BOARD_TEVII_S470, @@ -1022,6 +1040,35 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } +/* Some TBS cards require initing a chip using a bitbanged SPI attached + to the cx23885 gpio's. If this chip doesn't get init'ed the demod + doesn't respond to any command. */ +static void tbs_card_init(struct cx23885_dev *dev) +{ + int i; + const u8 buf[] = { + 0xe0, 0x06, 0x66, 0x33, 0x65, + 0x01, 0x17, 0x06, 0xde}; + + switch (dev->board) { + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: + cx_set(GP0_IO, 0x00070007); + usleep_range(1000, 10000); + cx_clear(GP0_IO, 2); + usleep_range(1000, 10000); + for (i = 0; i < 9 * 8; i++) { + cx_clear(GP0_IO, 7); + usleep_range(1000, 10000); + cx_set(GP0_IO, + ((buf[i >> 3] >> (7 - (i & 7))) & 1) | 4); + usleep_range(1000, 10000); + } + cx_set(GP0_IO, 7); + break; + } +} + int cx23885_tuner_callback(void *priv, int component, int command, int arg) { struct cx23885_tsport *port = priv; @@ -1224,6 +1271,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x00040004); break; case CX23885_BOARD_TBS_6920: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: case CX23885_BOARD_PROF_8000: cx_write(MC417_CTL, 0x00000036); cx_write(MC417_OEN, 0x00001000); @@ -1472,6 +1521,8 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_MYGICA_X8507: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: if (!enable_885_ir) break; dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); @@ -1515,6 +1566,8 @@ void cx23885_ir_fini(struct cx23885_dev *dev) case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_MYGICA_X8507: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: cx23885_irq_remove(dev, PCI_MSK_AV_CORE); /* sd_ir is a duplicate pointer to the AV Core, just clear it */ dev->sd_ir = NULL; @@ -1560,6 +1613,8 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_MYGICA_X8507: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: if (dev->sd_ir) cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); break; @@ -1675,6 +1730,16 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + tbs_card_init(dev); + break; case CX23885_BOARD_MYGICA_X8506: case CX23885_BOARD_MAGICPRO_PROHDTVE2: ts1->gen_ctrl_val = 0x5; /* Parallel */ @@ -1750,6 +1815,8 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_MYGICA_X8507: case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_AVERMEDIA_HC81R: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, "cx25840", 0x88 >> 1, NULL); diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 9c5ed10..bfb7e33 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -51,6 +51,7 @@ #include "stv6110.h" #include "lnbh24.h" #include "cx24116.h" +#include "cx24117.h" #include "cimax2.h" #include "lgs8gxx.h" #include "netup-eeprom.h" @@ -468,6 +469,10 @@ static struct cx24116_config tbs_cx24116_config = { .demod_address = 0x55, }; +static struct cx24117_config tbs_cx24117_config = { + .demod_address = 0x55, +}; + static struct ds3000_config tevii_ds3000_config = { .demod_address = 0x68, }; @@ -1027,6 +1032,32 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; break; + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: + i2c_bus = &dev->i2c_bus[1]; + + switch (port->nr) { + /* PORT B */ + case 1: + fe0->dvb.frontend = dvb_attach(cx24117_attach, + &tbs_cx24117_config, + &i2c_bus->i2c_adap, NULL); + break; + /* PORT C */ + case 2: + /* use fe1 pointer as temporary holder */ + /* for the first frontend */ + fe1 = videobuf_dvb_get_frontend( + &port->dev->ts1.frontends, 1); + + fe0->dvb.frontend = dvb_attach(cx24117_attach, + &tbs_cx24117_config, + &i2c_bus->i2c_adap, fe1->dvb.frontend); + /* we're done, so clear fe1 pointer */ + fe1 = NULL; + break; + } + break; case CX23885_BOARD_TEVII_S470: i2c_bus = &dev->i2c_bus[1]; diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c index 7875dfb..8a49e7c 100644 --- a/drivers/media/pci/cx23885/cx23885-input.c +++ b/drivers/media/pci/cx23885/cx23885-input.c @@ -90,6 +90,8 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_MYGICA_X8507: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: /* * The only boards we handle right now. However other boards * using the CX2388x integrated IR controller should be similar @@ -168,6 +170,8 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev) break; case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: /* * The IR controller on this board only returns pulse widths. * Any other mode setting will fail to set up the device. @@ -298,6 +302,14 @@ int cx23885_input_init(struct cx23885_dev *dev) /* A guess at the remote */ rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02; break; + case CX23885_BOARD_TBS_6980: + case CX23885_BOARD_TBS_6981: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_BIT_ALL; + /* A guess at the remote */ + rc_map = RC_MAP_TBS_NEC; + break; default: return -ENODEV; } diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index 5687d3f..ebcc63e 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -93,6 +93,8 @@ #define CX23885_BOARD_PROF_8000 37 #define CX23885_BOARD_HAUPPAUGE_HVR4400 38 #define CX23885_BOARD_AVERMEDIA_HC81R 39 +#define CX23885_BOARD_TBS_6981 40 +#define CX23885_BOARD_TBS_6980 41 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002
v4: Patch order fixed. Changed some msleep's to clear checkpatch warnings. Signed-off-by: Luis Alves <ljalvs@gmail.com> --- drivers/media/pci/cx23885/Kconfig | 1 + drivers/media/pci/cx23885/cx23885-cards.c | 67 +++++++++++++++++++++++++++++ drivers/media/pci/cx23885/cx23885-dvb.c | 31 +++++++++++++ drivers/media/pci/cx23885/cx23885-input.c | 12 ++++++ drivers/media/pci/cx23885/cx23885.h | 2 + 5 files changed, 113 insertions(+)