Message ID | 1372511659-26936-1-git-send-email-pmeerw@pmeerw.net (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Quoting Peter Meerwald (2013-06-29 06:14:19) > Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Thanks for the corrections Peter. Taken into clk-next. Regards, Mike > --- > drivers/clk/Kconfig | 2 +- > drivers/clk/clk.c | 15 ++++++++------- > 2 files changed, 9 insertions(+), 8 deletions(-) > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 0357ac4..1ba18f9 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -27,7 +27,7 @@ config COMMON_CLK_DEBUG > bool "DebugFS representation of clock tree" > select DEBUG_FS > ---help--- > - Creates a directory hierchy in debugfs for visualizing the clk > + Creates a directory hierarchy in debugfs for visualizing the clk > tree structure. Each directory contains read-only members > that export information specific to that clk node: clk_rate, > clk_flags, clk_prepare_count, clk_enable_count & > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c > index 1144e8c..d6b45b6 100644 > --- a/drivers/clk/clk.c > +++ b/drivers/clk/clk.c > @@ -702,7 +702,7 @@ void __clk_unprepare(struct clk *clk) > > /** > * clk_unprepare - undo preparation of a clock source > - * @clk: the clk being unprepare > + * @clk: the clk being unprepared > * > * clk_unprepare may sleep, which differentiates it from clk_disable. In a > * simple case, clk_unprepare can be used instead of clk_disable to gate a clk > @@ -869,6 +869,7 @@ EXPORT_SYMBOL_GPL(clk_enable); > /** > * __clk_round_rate - round the given rate for a clk > * @clk: round the rate of this clock > + * @rate: the rate which is to be rounded > * > * Caller must hold prepare_lock. Useful for clk_ops such as .set_rate > */ > @@ -956,7 +957,7 @@ static int __clk_notify(struct clk *clk, unsigned long msg, > * > * Walks the subtree of clks starting with clk and recalculates rates as it > * goes. Note that if a clk does not implement the .recalc_rate callback then > - * it is assumed that the clock will take on the rate of it's parent. > + * it is assumed that the clock will take on the rate of its parent. > * > * clk_recalc_rates also propagates the POST_RATE_CHANGE notification, > * if necessary. > @@ -1026,7 +1027,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate); > * pre-rate change notifications and returns early if no clks in the > * subtree have subscribed to the notifications. Note that if a clk does not > * implement the .recalc_rate callback then it is assumed that the clock will > - * take on the rate of it's parent. > + * take on the rate of its parent. > * > * Caller must hold prepare_lock. > */ > @@ -1198,7 +1199,7 @@ static void clk_change_rate(struct clk *clk) > * outcome of clk's .round_rate implementation. If *parent_rate is unchanged > * after calling .round_rate then upstream parent propagation is ignored. If > * *parent_rate comes back with a new rate for clk's parent then we propagate > - * up to clk's parent and set it's rate. Upward propagation will continue > + * up to clk's parent and set its rate. Upward propagation will continue > * until either a clk does not support the CLK_SET_RATE_PARENT flag or > * .round_rate stops requesting changes to clk's parent_rate. > * > @@ -1449,7 +1450,7 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index) > * @clk: the mux clk whose input we are switching > * @parent: the new input to clk > * > - * Re-parent clk to use parent as it's new input source. If clk has the > + * Re-parent clk to use parent as its new input source. If clk has the > * CLK_SET_PARENT_GATE flag set then clk must be gated for this > * operation to succeed. After successfully changing clk's parent > * clk_set_parent will update the clk topology, sysfs topology and > @@ -1650,7 +1651,7 @@ int __clk_init(struct device *dev, struct clk *clk) > * The .init callback is not used by any of the basic clock types, but > * exists for weird hardware that must perform initialization magic. > * Please consider other ways of solving initialization problems before > - * using this callback, as it's use is discouraged. > + * using this callback, as its use is discouraged. > */ > if (clk->ops->init) > clk->ops->init(clk->hw); > @@ -1677,7 +1678,7 @@ out: > * very large numbers of clocks that need to be statically initialized. It is > * a layering violation to include clk-private.h from any code which implements > * a clock's .ops; as such any statically initialized clock data MUST be in a > - * separate C file from the logic that implements it's operations. Returns 0 > + * separate C file from the logic that implements its operations. Returns 0 > * on success, otherwise an error code. > */ > struct clk *__clk_register(struct device *dev, struct clk_hw *hw) > -- > 1.8.3.1
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 0357ac4..1ba18f9 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -27,7 +27,7 @@ config COMMON_CLK_DEBUG bool "DebugFS representation of clock tree" select DEBUG_FS ---help--- - Creates a directory hierchy in debugfs for visualizing the clk + Creates a directory hierarchy in debugfs for visualizing the clk tree structure. Each directory contains read-only members that export information specific to that clk node: clk_rate, clk_flags, clk_prepare_count, clk_enable_count & diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 1144e8c..d6b45b6 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -702,7 +702,7 @@ void __clk_unprepare(struct clk *clk) /** * clk_unprepare - undo preparation of a clock source - * @clk: the clk being unprepare + * @clk: the clk being unprepared * * clk_unprepare may sleep, which differentiates it from clk_disable. In a * simple case, clk_unprepare can be used instead of clk_disable to gate a clk @@ -869,6 +869,7 @@ EXPORT_SYMBOL_GPL(clk_enable); /** * __clk_round_rate - round the given rate for a clk * @clk: round the rate of this clock + * @rate: the rate which is to be rounded * * Caller must hold prepare_lock. Useful for clk_ops such as .set_rate */ @@ -956,7 +957,7 @@ static int __clk_notify(struct clk *clk, unsigned long msg, * * Walks the subtree of clks starting with clk and recalculates rates as it * goes. Note that if a clk does not implement the .recalc_rate callback then - * it is assumed that the clock will take on the rate of it's parent. + * it is assumed that the clock will take on the rate of its parent. * * clk_recalc_rates also propagates the POST_RATE_CHANGE notification, * if necessary. @@ -1026,7 +1027,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate); * pre-rate change notifications and returns early if no clks in the * subtree have subscribed to the notifications. Note that if a clk does not * implement the .recalc_rate callback then it is assumed that the clock will - * take on the rate of it's parent. + * take on the rate of its parent. * * Caller must hold prepare_lock. */ @@ -1198,7 +1199,7 @@ static void clk_change_rate(struct clk *clk) * outcome of clk's .round_rate implementation. If *parent_rate is unchanged * after calling .round_rate then upstream parent propagation is ignored. If * *parent_rate comes back with a new rate for clk's parent then we propagate - * up to clk's parent and set it's rate. Upward propagation will continue + * up to clk's parent and set its rate. Upward propagation will continue * until either a clk does not support the CLK_SET_RATE_PARENT flag or * .round_rate stops requesting changes to clk's parent_rate. * @@ -1449,7 +1450,7 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index) * @clk: the mux clk whose input we are switching * @parent: the new input to clk * - * Re-parent clk to use parent as it's new input source. If clk has the + * Re-parent clk to use parent as its new input source. If clk has the * CLK_SET_PARENT_GATE flag set then clk must be gated for this * operation to succeed. After successfully changing clk's parent * clk_set_parent will update the clk topology, sysfs topology and @@ -1650,7 +1651,7 @@ int __clk_init(struct device *dev, struct clk *clk) * The .init callback is not used by any of the basic clock types, but * exists for weird hardware that must perform initialization magic. * Please consider other ways of solving initialization problems before - * using this callback, as it's use is discouraged. + * using this callback, as its use is discouraged. */ if (clk->ops->init) clk->ops->init(clk->hw); @@ -1677,7 +1678,7 @@ out: * very large numbers of clocks that need to be statically initialized. It is * a layering violation to include clk-private.h from any code which implements * a clock's .ops; as such any statically initialized clock data MUST be in a - * separate C file from the logic that implements it's operations. Returns 0 + * separate C file from the logic that implements its operations. Returns 0 * on success, otherwise an error code. */ struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> --- drivers/clk/Kconfig | 2 +- drivers/clk/clk.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 8 deletions(-)