@@ -341,6 +341,10 @@ static const __initconst struct gates_data sun4i_ahb_gates_data = {
.mask = {0x7F77FFF, 0x14FB3F},
};
+static const __initconst struct gates_data sun5i_a10s_ahb_gates_data = {
+ .mask = {0x147667e7, 0x185915},
+};
+
static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
.mask = {0x107067e7, 0x185111},
};
@@ -349,6 +353,10 @@ static const __initconst struct gates_data sun4i_apb0_gates_data = {
.mask = {0x4EF},
};
+static const __initconst struct gates_data sun5i_a10s_apb0_gates_data = {
+ .mask = {0x469},
+};
+
static const __initconst struct gates_data sun5i_a13_apb0_gates_data = {
.mask = {0x61},
};
@@ -357,6 +365,10 @@ static const __initconst struct gates_data sun4i_apb1_gates_data = {
.mask = {0xFF00F7},
};
+static const __initconst struct gates_data sun5i_a10s_apb1_gates_data = {
+ .mask = {0xf0007},
+};
+
static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
.mask = {0xa0007},
};
@@ -442,10 +454,13 @@ static const __initconst struct of_device_id clk_mux_match[] = {
static const __initconst struct of_device_id clk_gates_match[] = {
{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,},
{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
+ {.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
+ {.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
+ {.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
{}
};
The Allwinner A10s has a slightly different gates set than the A10 and A13, so add these gates to the clk driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- drivers/clk/sunxi/clk-sunxi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)