Message ID | 1362685180-7768-5-git-send-email-seth.forshee@canonical.com (mailing list archive) |
---|---|
State | RFC, archived |
Headers | show |
On 03/08/2013 03:39 AM, Seth Forshee wrote: > Windows 8 requires all backlight interfaces to report 101 brightness > values, and as a result we're starting to see machines with that many > brightness levels in _BCL. For machines which send these notifications > when the brightness up/down keys are pressed this means a lot of key > presses to get any kind of noticeable change in brightness. > > For a while now we've had the ability to disable in-kernel handling of > notifications via the video.brightness_switch_enabled parameter. Change > this to default to off, and let userspace choose more reasonable > increments for changing the brightness. I just found one more reason for this param to default 0. We are going to separate the backlight interface control and event notification functionalities of the ACPI video module, it is highly possible a lot of systems will use a combination of the event notification handler and intel_backlight interface. So it doesn't make sense to let video module to do any adjustment on its own if user space has chosen a different interface to use. Actually, it can cause problems as in ASUS's case: https://bugzilla.kernel.org/show_bug.cgi?id=52951 The problem there is, on hotkey brightness up, the video module will adjust the brightness level first and since its _BQC is broken, it gets a wrong number(too low or too high or whatever) and then does the _BCM call. The _BCM method works. Then user space picks the intel_backlight to do the adjustment, but since the _BCM already sets a wrong value, the user space's adjustment is affected too. The result is, user has only two visible levels, very low and very high. This only occurs on -rc3, since we removed the acpi_video_verify_backlight_support from acpi_video_switch_brightness function. So either we make this param default to 0, or we make a new function to avoid brightness switch in video module for Win8 systems. I prefer to set this param to 0 by default. What do you guys think? Thanks, Aaron > > Signed-off-by: Seth Forshee <seth.forshee@canonical.com> > --- > drivers/acpi/video.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c > index 6a19bf7..431b22e 100644 > --- a/drivers/acpi/video.c > +++ b/drivers/acpi/video.c > @@ -69,7 +69,7 @@ MODULE_AUTHOR("Bruno Ducrot"); > MODULE_DESCRIPTION("ACPI Video Driver"); > MODULE_LICENSE("GPL"); > > -static bool brightness_switch_enabled = 1; > +static bool brightness_switch_enabled = 0; > module_param(brightness_switch_enabled, bool, 0644); > > /* > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: > On 03/08/2013 03:39 AM, Seth Forshee wrote: > > Windows 8 requires all backlight interfaces to report 101 brightness > > values, and as a result we're starting to see machines with that many > > brightness levels in _BCL. For machines which send these notifications > > when the brightness up/down keys are pressed this means a lot of key > > presses to get any kind of noticeable change in brightness. > > > > For a while now we've had the ability to disable in-kernel handling of > > notifications via the video.brightness_switch_enabled parameter. Change > > this to default to off, and let userspace choose more reasonable > > increments for changing the brightness. > > I just found one more reason for this param to default 0. Do you mean video.brightness_switch_enabled? > We are going to separate the backlight interface control and event > notification functionalities of the ACPI video module, it is highly > possible a lot of systems will use a combination of the event > notification handler and intel_backlight interface. So it doesn't make > sense to let video module to do any adjustment on its own if user space > has chosen a different interface to use. Actually, it can cause problems > as in ASUS's case: > https://bugzilla.kernel.org/show_bug.cgi?id=52951 > > The problem there is, on hotkey brightness up, the video module will > adjust the brightness level first and since its _BQC is broken, it gets > a wrong number(too low or too high or whatever) and then does the _BCM > call. The _BCM method works. Then user space picks the intel_backlight > to do the adjustment, but since the _BCM already sets a wrong value, the > user space's adjustment is affected too. The result is, user has only > two visible levels, very low and very high. > > This only occurs on -rc3, since we removed the > acpi_video_verify_backlight_support from acpi_video_switch_brightness > function. What did we do before -rc2? Did we address that in any way? > So either we make this param default to 0, or we make a new > function to avoid brightness switch in video module for Win8 systems. > > I prefer to set this param to 0 by default. What do you guys think? That depends on what we did earlier. Thanks, Rafael
On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: > On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: >> On 03/08/2013 03:39 AM, Seth Forshee wrote: >>> Windows 8 requires all backlight interfaces to report 101 brightness >>> values, and as a result we're starting to see machines with that many >>> brightness levels in _BCL. For machines which send these notifications >>> when the brightness up/down keys are pressed this means a lot of key >>> presses to get any kind of noticeable change in brightness. >>> >>> For a while now we've had the ability to disable in-kernel handling of >>> notifications via the video.brightness_switch_enabled parameter. Change >>> this to default to off, and let userspace choose more reasonable >>> increments for changing the brightness. >> >> I just found one more reason for this param to default 0. > > Do you mean video.brightness_switch_enabled? Yes. > >> We are going to separate the backlight interface control and event >> notification functionalities of the ACPI video module, it is highly >> possible a lot of systems will use a combination of the event >> notification handler and intel_backlight interface. So it doesn't make >> sense to let video module to do any adjustment on its own if user space >> has chosen a different interface to use. Actually, it can cause problems >> as in ASUS's case: >> https://bugzilla.kernel.org/show_bug.cgi?id=52951 >> >> The problem there is, on hotkey brightness up, the video module will >> adjust the brightness level first and since its _BQC is broken, it gets >> a wrong number(too low or too high or whatever) and then does the _BCM >> call. The _BCM method works. Then user space picks the intel_backlight >> to do the adjustment, but since the _BCM already sets a wrong value, the >> user space's adjustment is affected too. The result is, user has only >> two visible levels, very low and very high. >> >> This only occurs on -rc3, since we removed the >> acpi_video_verify_backlight_support from acpi_video_switch_brightness >> function. > > What did we do before -rc2? Did we address that in any way? No, before rc2, backlight is broken on that system. In rc2, we added the win8 patch and a fix patch for the hotkey, then the ACPI video module's backlight control and in kernel brightness handling is disabled. With the working hotkey and intel_backlight, rc2 works for the system. Then with the revert in rc3, user needs to choose intel_backlight in xorg.conf but the in kernel brightness handling from ACPI video module is back. Since video module is broken, it breaks the backlight hotkey functionality. Thanks, Aaron > >> So either we make this param default to 0, or we make a new >> function to avoid brightness switch in video module for Win8 systems. >> >> I prefer to set this param to 0 by default. What do you guys think? > > That depends on what we did earlier. > > Thanks, > Rafael > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday, August 02, 2013 10:52:09 PM Aaron Lu wrote: > On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: > > On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: > >> On 03/08/2013 03:39 AM, Seth Forshee wrote: > >>> Windows 8 requires all backlight interfaces to report 101 brightness > >>> values, and as a result we're starting to see machines with that many > >>> brightness levels in _BCL. For machines which send these notifications > >>> when the brightness up/down keys are pressed this means a lot of key > >>> presses to get any kind of noticeable change in brightness. > >>> > >>> For a while now we've had the ability to disable in-kernel handling of > >>> notifications via the video.brightness_switch_enabled parameter. Change > >>> this to default to off, and let userspace choose more reasonable > >>> increments for changing the brightness. > >> > >> I just found one more reason for this param to default 0. > > > > Do you mean video.brightness_switch_enabled? > > Yes. > > > > >> We are going to separate the backlight interface control and event > >> notification functionalities of the ACPI video module, it is highly > >> possible a lot of systems will use a combination of the event > >> notification handler and intel_backlight interface. So it doesn't make > >> sense to let video module to do any adjustment on its own if user space > >> has chosen a different interface to use. Actually, it can cause problems > >> as in ASUS's case: > >> https://bugzilla.kernel.org/show_bug.cgi?id=52951 > >> > >> The problem there is, on hotkey brightness up, the video module will > >> adjust the brightness level first and since its _BQC is broken, it gets > >> a wrong number(too low or too high or whatever) and then does the _BCM > >> call. The _BCM method works. Then user space picks the intel_backlight > >> to do the adjustment, but since the _BCM already sets a wrong value, the > >> user space's adjustment is affected too. The result is, user has only > >> two visible levels, very low and very high. > >> > >> This only occurs on -rc3, since we removed the > >> acpi_video_verify_backlight_support from acpi_video_switch_brightness > >> function. > > > > What did we do before -rc2? Did we address that in any way? > > No, before rc2, backlight is broken on that system. Well, it will have to stay that way in 3.11 I'm afraid, unless we have a fix or a workaround that is *guaranteed* not to introduce any new issues on any systems. > In rc2, we added the win8 patch and a fix patch for the hotkey, then > the ACPI video module's backlight control and in kernel brightness > handling is disabled. With the working hotkey and intel_backlight, rc2 > works for the system. Then with the revert in rc3, user needs to choose > intel_backlight in xorg.conf but the in kernel brightness handling from > ACPI video module is back. Since video module is broken, it breaks the > backlight hotkey functionality. I guess we need to revert the hotkey fix too (that is efaa14c, right?) then, is that correct? And try to do something smarter for 3.12? Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/03/2013 08:26 AM, Rafael J. Wysocki wrote: > On Friday, August 02, 2013 10:52:09 PM Aaron Lu wrote: >> On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: >>> On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: >>>> On 03/08/2013 03:39 AM, Seth Forshee wrote: >>>>> Windows 8 requires all backlight interfaces to report 101 brightness >>>>> values, and as a result we're starting to see machines with that many >>>>> brightness levels in _BCL. For machines which send these notifications >>>>> when the brightness up/down keys are pressed this means a lot of key >>>>> presses to get any kind of noticeable change in brightness. >>>>> >>>>> For a while now we've had the ability to disable in-kernel handling of >>>>> notifications via the video.brightness_switch_enabled parameter. Change >>>>> this to default to off, and let userspace choose more reasonable >>>>> increments for changing the brightness. >>>> >>>> I just found one more reason for this param to default 0. >>> >>> Do you mean video.brightness_switch_enabled? >> >> Yes. >> >>> >>>> We are going to separate the backlight interface control and event >>>> notification functionalities of the ACPI video module, it is highly >>>> possible a lot of systems will use a combination of the event >>>> notification handler and intel_backlight interface. So it doesn't make >>>> sense to let video module to do any adjustment on its own if user space >>>> has chosen a different interface to use. Actually, it can cause problems >>>> as in ASUS's case: >>>> https://bugzilla.kernel.org/show_bug.cgi?id=52951 >>>> >>>> The problem there is, on hotkey brightness up, the video module will >>>> adjust the brightness level first and since its _BQC is broken, it gets >>>> a wrong number(too low or too high or whatever) and then does the _BCM >>>> call. The _BCM method works. Then user space picks the intel_backlight >>>> to do the adjustment, but since the _BCM already sets a wrong value, the >>>> user space's adjustment is affected too. The result is, user has only >>>> two visible levels, very low and very high. >>>> >>>> This only occurs on -rc3, since we removed the >>>> acpi_video_verify_backlight_support from acpi_video_switch_brightness >>>> function. >>> >>> What did we do before -rc2? Did we address that in any way? >> >> No, before rc2, backlight is broken on that system. > > Well, it will have to stay that way in 3.11 I'm afraid, unless we have a fix > or a workaround that is *guaranteed* not to introduce any new issues on any > systems. > >> In rc2, we added the win8 patch and a fix patch for the hotkey, then >> the ACPI video module's backlight control and in kernel brightness >> handling is disabled. With the working hotkey and intel_backlight, rc2 >> works for the system. Then with the revert in rc3, user needs to choose >> intel_backlight in xorg.conf but the in kernel brightness handling from >> ACPI video module is back. Since video module is broken, it breaks the >> backlight hotkey functionality. > > I guess we need to revert the hotkey fix too (that is efaa14c, right?) > then, is that correct? And try to do something smarter for 3.12? With or without commit efaa14c, hotkey for backlight is broken out of box for the affected systems(ASUS N56VZ and N56VJ). But with that commit, user has a chance of getting a working backlight with hotkey by specifying intel_backlight and adding the video.brightness_switch_enabled=0. So I think we can keep that commit. Thanks, Aaron -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday, August 03, 2013 05:46:02 PM Aaron Lu wrote: > On 08/03/2013 08:26 AM, Rafael J. Wysocki wrote: > > On Friday, August 02, 2013 10:52:09 PM Aaron Lu wrote: > >> On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: > >>> On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: > >>>> On 03/08/2013 03:39 AM, Seth Forshee wrote: > >>>>> Windows 8 requires all backlight interfaces to report 101 brightness > >>>>> values, and as a result we're starting to see machines with that many > >>>>> brightness levels in _BCL. For machines which send these notifications > >>>>> when the brightness up/down keys are pressed this means a lot of key > >>>>> presses to get any kind of noticeable change in brightness. > >>>>> > >>>>> For a while now we've had the ability to disable in-kernel handling of > >>>>> notifications via the video.brightness_switch_enabled parameter. Change > >>>>> this to default to off, and let userspace choose more reasonable > >>>>> increments for changing the brightness. > >>>> > >>>> I just found one more reason for this param to default 0. > >>> > >>> Do you mean video.brightness_switch_enabled? > >> > >> Yes. > >> > >>> > >>>> We are going to separate the backlight interface control and event > >>>> notification functionalities of the ACPI video module, it is highly > >>>> possible a lot of systems will use a combination of the event > >>>> notification handler and intel_backlight interface. So it doesn't make > >>>> sense to let video module to do any adjustment on its own if user space > >>>> has chosen a different interface to use. Actually, it can cause problems > >>>> as in ASUS's case: > >>>> https://bugzilla.kernel.org/show_bug.cgi?id=52951 > >>>> > >>>> The problem there is, on hotkey brightness up, the video module will > >>>> adjust the brightness level first and since its _BQC is broken, it gets > >>>> a wrong number(too low or too high or whatever) and then does the _BCM > >>>> call. The _BCM method works. Then user space picks the intel_backlight > >>>> to do the adjustment, but since the _BCM already sets a wrong value, the > >>>> user space's adjustment is affected too. The result is, user has only > >>>> two visible levels, very low and very high. > >>>> > >>>> This only occurs on -rc3, since we removed the > >>>> acpi_video_verify_backlight_support from acpi_video_switch_brightness > >>>> function. > >>> > >>> What did we do before -rc2? Did we address that in any way? > >> > >> No, before rc2, backlight is broken on that system. > > > > Well, it will have to stay that way in 3.11 I'm afraid, unless we have a fix > > or a workaround that is *guaranteed* not to introduce any new issues on any > > systems. > > > >> In rc2, we added the win8 patch and a fix patch for the hotkey, then > >> the ACPI video module's backlight control and in kernel brightness > >> handling is disabled. With the working hotkey and intel_backlight, rc2 > >> works for the system. Then with the revert in rc3, user needs to choose > >> intel_backlight in xorg.conf but the in kernel brightness handling from > >> ACPI video module is back. Since video module is broken, it breaks the > >> backlight hotkey functionality. > > > > I guess we need to revert the hotkey fix too (that is efaa14c, right?) > > then, is that correct? And try to do something smarter for 3.12? > > With or without commit efaa14c, hotkey for backlight is broken out of > box for the affected systems(ASUS N56VZ and N56VJ). But with that commit, > user has a chance of getting a working backlight with hotkey by specifying > intel_backlight and adding the video.brightness_switch_enabled=0. So I > think we can keep that commit. What about the "boot to black screen" problem, then? Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/03/2013 07:23 PM, Rafael J. Wysocki wrote: > On Saturday, August 03, 2013 05:46:02 PM Aaron Lu wrote: >> On 08/03/2013 08:26 AM, Rafael J. Wysocki wrote: >>> On Friday, August 02, 2013 10:52:09 PM Aaron Lu wrote: >>>> On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: >>>>> On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: >>>>>> On 03/08/2013 03:39 AM, Seth Forshee wrote: >>>>>>> Windows 8 requires all backlight interfaces to report 101 brightness >>>>>>> values, and as a result we're starting to see machines with that many >>>>>>> brightness levels in _BCL. For machines which send these notifications >>>>>>> when the brightness up/down keys are pressed this means a lot of key >>>>>>> presses to get any kind of noticeable change in brightness. >>>>>>> >>>>>>> For a while now we've had the ability to disable in-kernel handling of >>>>>>> notifications via the video.brightness_switch_enabled parameter. Change >>>>>>> this to default to off, and let userspace choose more reasonable >>>>>>> increments for changing the brightness. >>>>>> >>>>>> I just found one more reason for this param to default 0. >>>>> >>>>> Do you mean video.brightness_switch_enabled? >>>> >>>> Yes. >>>> >>>>> >>>>>> We are going to separate the backlight interface control and event >>>>>> notification functionalities of the ACPI video module, it is highly >>>>>> possible a lot of systems will use a combination of the event >>>>>> notification handler and intel_backlight interface. So it doesn't make >>>>>> sense to let video module to do any adjustment on its own if user space >>>>>> has chosen a different interface to use. Actually, it can cause problems >>>>>> as in ASUS's case: >>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=52951 >>>>>> >>>>>> The problem there is, on hotkey brightness up, the video module will >>>>>> adjust the brightness level first and since its _BQC is broken, it gets >>>>>> a wrong number(too low or too high or whatever) and then does the _BCM >>>>>> call. The _BCM method works. Then user space picks the intel_backlight >>>>>> to do the adjustment, but since the _BCM already sets a wrong value, the >>>>>> user space's adjustment is affected too. The result is, user has only >>>>>> two visible levels, very low and very high. >>>>>> >>>>>> This only occurs on -rc3, since we removed the >>>>>> acpi_video_verify_backlight_support from acpi_video_switch_brightness >>>>>> function. >>>>> >>>>> What did we do before -rc2? Did we address that in any way? >>>> >>>> No, before rc2, backlight is broken on that system. >>> >>> Well, it will have to stay that way in 3.11 I'm afraid, unless we have a fix >>> or a workaround that is *guaranteed* not to introduce any new issues on any >>> systems. >>> >>>> In rc2, we added the win8 patch and a fix patch for the hotkey, then >>>> the ACPI video module's backlight control and in kernel brightness >>>> handling is disabled. With the working hotkey and intel_backlight, rc2 >>>> works for the system. Then with the revert in rc3, user needs to choose >>>> intel_backlight in xorg.conf but the in kernel brightness handling from >>>> ACPI video module is back. Since video module is broken, it breaks the >>>> backlight hotkey functionality. >>> >>> I guess we need to revert the hotkey fix too (that is efaa14c, right?) >>> then, is that correct? And try to do something smarter for 3.12? >> >> With or without commit efaa14c, hotkey for backlight is broken out of >> box for the affected systems(ASUS N56VZ and N56VJ). But with that commit, >> user has a chance of getting a working backlight with hotkey by specifying >> intel_backlight and adding the video.brightness_switch_enabled=0. So I >> think we can keep that commit. > > What about the "boot to black screen" problem, then? You mean this one? https://lkml.org/lkml/2013/7/30/814 -Aaron -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday, August 03, 2013 08:10:12 PM Aaron Lu wrote: > On 08/03/2013 07:23 PM, Rafael J. Wysocki wrote: > > On Saturday, August 03, 2013 05:46:02 PM Aaron Lu wrote: > >> On 08/03/2013 08:26 AM, Rafael J. Wysocki wrote: > >>> On Friday, August 02, 2013 10:52:09 PM Aaron Lu wrote: > >>>> On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: > >>>>> On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: > >>>>>> On 03/08/2013 03:39 AM, Seth Forshee wrote: > >>>>>>> Windows 8 requires all backlight interfaces to report 101 brightness > >>>>>>> values, and as a result we're starting to see machines with that many > >>>>>>> brightness levels in _BCL. For machines which send these notifications > >>>>>>> when the brightness up/down keys are pressed this means a lot of key > >>>>>>> presses to get any kind of noticeable change in brightness. > >>>>>>> > >>>>>>> For a while now we've had the ability to disable in-kernel handling of > >>>>>>> notifications via the video.brightness_switch_enabled parameter. Change > >>>>>>> this to default to off, and let userspace choose more reasonable > >>>>>>> increments for changing the brightness. > >>>>>> > >>>>>> I just found one more reason for this param to default 0. > >>>>> > >>>>> Do you mean video.brightness_switch_enabled? > >>>> > >>>> Yes. > >>>> > >>>>> > >>>>>> We are going to separate the backlight interface control and event > >>>>>> notification functionalities of the ACPI video module, it is highly > >>>>>> possible a lot of systems will use a combination of the event > >>>>>> notification handler and intel_backlight interface. So it doesn't make > >>>>>> sense to let video module to do any adjustment on its own if user space > >>>>>> has chosen a different interface to use. Actually, it can cause problems > >>>>>> as in ASUS's case: > >>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=52951 > >>>>>> > >>>>>> The problem there is, on hotkey brightness up, the video module will > >>>>>> adjust the brightness level first and since its _BQC is broken, it gets > >>>>>> a wrong number(too low or too high or whatever) and then does the _BCM > >>>>>> call. The _BCM method works. Then user space picks the intel_backlight > >>>>>> to do the adjustment, but since the _BCM already sets a wrong value, the > >>>>>> user space's adjustment is affected too. The result is, user has only > >>>>>> two visible levels, very low and very high. > >>>>>> > >>>>>> This only occurs on -rc3, since we removed the > >>>>>> acpi_video_verify_backlight_support from acpi_video_switch_brightness > >>>>>> function. > >>>>> > >>>>> What did we do before -rc2? Did we address that in any way? > >>>> > >>>> No, before rc2, backlight is broken on that system. > >>> > >>> Well, it will have to stay that way in 3.11 I'm afraid, unless we have a fix > >>> or a workaround that is *guaranteed* not to introduce any new issues on any > >>> systems. > >>> > >>>> In rc2, we added the win8 patch and a fix patch for the hotkey, then > >>>> the ACPI video module's backlight control and in kernel brightness > >>>> handling is disabled. With the working hotkey and intel_backlight, rc2 > >>>> works for the system. Then with the revert in rc3, user needs to choose > >>>> intel_backlight in xorg.conf but the in kernel brightness handling from > >>>> ACPI video module is back. Since video module is broken, it breaks the > >>>> backlight hotkey functionality. > >>> > >>> I guess we need to revert the hotkey fix too (that is efaa14c, right?) > >>> then, is that correct? And try to do something smarter for 3.12? > >> > >> With or without commit efaa14c, hotkey for backlight is broken out of > >> box for the affected systems(ASUS N56VZ and N56VJ). But with that commit, > >> user has a chance of getting a working backlight with hotkey by specifying > >> intel_backlight and adding the video.brightness_switch_enabled=0. So I > >> think we can keep that commit. > > > > What about the "boot to black screen" problem, then? > > You mean this one? > https://lkml.org/lkml/2013/7/30/814 Yes. :-) -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/04/2013 06:07 AM, Rafael J. Wysocki wrote: > On Saturday, August 03, 2013 08:10:12 PM Aaron Lu wrote: >> On 08/03/2013 07:23 PM, Rafael J. Wysocki wrote: >>> On Saturday, August 03, 2013 05:46:02 PM Aaron Lu wrote: >>>> On 08/03/2013 08:26 AM, Rafael J. Wysocki wrote: >>>>> On Friday, August 02, 2013 10:52:09 PM Aaron Lu wrote: >>>>>> On 08/02/2013 10:41 PM, Rafael J. Wysocki wrote: >>>>>>> On Friday, August 02, 2013 01:55:47 PM Aaron Lu wrote: >>>>>>>> On 03/08/2013 03:39 AM, Seth Forshee wrote: >>>>>>>>> Windows 8 requires all backlight interfaces to report 101 brightness >>>>>>>>> values, and as a result we're starting to see machines with that many >>>>>>>>> brightness levels in _BCL. For machines which send these notifications >>>>>>>>> when the brightness up/down keys are pressed this means a lot of key >>>>>>>>> presses to get any kind of noticeable change in brightness. >>>>>>>>> >>>>>>>>> For a while now we've had the ability to disable in-kernel handling of >>>>>>>>> notifications via the video.brightness_switch_enabled parameter. Change >>>>>>>>> this to default to off, and let userspace choose more reasonable >>>>>>>>> increments for changing the brightness. >>>>>>>> >>>>>>>> I just found one more reason for this param to default 0. >>>>>>> >>>>>>> Do you mean video.brightness_switch_enabled? >>>>>> >>>>>> Yes. >>>>>> >>>>>>> >>>>>>>> We are going to separate the backlight interface control and event >>>>>>>> notification functionalities of the ACPI video module, it is highly >>>>>>>> possible a lot of systems will use a combination of the event >>>>>>>> notification handler and intel_backlight interface. So it doesn't make >>>>>>>> sense to let video module to do any adjustment on its own if user space >>>>>>>> has chosen a different interface to use. Actually, it can cause problems >>>>>>>> as in ASUS's case: >>>>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=52951 >>>>>>>> >>>>>>>> The problem there is, on hotkey brightness up, the video module will >>>>>>>> adjust the brightness level first and since its _BQC is broken, it gets >>>>>>>> a wrong number(too low or too high or whatever) and then does the _BCM >>>>>>>> call. The _BCM method works. Then user space picks the intel_backlight >>>>>>>> to do the adjustment, but since the _BCM already sets a wrong value, the >>>>>>>> user space's adjustment is affected too. The result is, user has only >>>>>>>> two visible levels, very low and very high. >>>>>>>> >>>>>>>> This only occurs on -rc3, since we removed the >>>>>>>> acpi_video_verify_backlight_support from acpi_video_switch_brightness >>>>>>>> function. >>>>>>> >>>>>>> What did we do before -rc2? Did we address that in any way? >>>>>> >>>>>> No, before rc2, backlight is broken on that system. >>>>> >>>>> Well, it will have to stay that way in 3.11 I'm afraid, unless we have a fix >>>>> or a workaround that is *guaranteed* not to introduce any new issues on any >>>>> systems. >>>>> >>>>>> In rc2, we added the win8 patch and a fix patch for the hotkey, then >>>>>> the ACPI video module's backlight control and in kernel brightness >>>>>> handling is disabled. With the working hotkey and intel_backlight, rc2 >>>>>> works for the system. Then with the revert in rc3, user needs to choose >>>>>> intel_backlight in xorg.conf but the in kernel brightness handling from >>>>>> ACPI video module is back. Since video module is broken, it breaks the >>>>>> backlight hotkey functionality. >>>>> >>>>> I guess we need to revert the hotkey fix too (that is efaa14c, right?) >>>>> then, is that correct? And try to do something smarter for 3.12? >>>> >>>> With or without commit efaa14c, hotkey for backlight is broken out of >>>> box for the affected systems(ASUS N56VZ and N56VJ). But with that commit, >>>> user has a chance of getting a working backlight with hotkey by specifying >>>> intel_backlight and adding the video.brightness_switch_enabled=0. So I >>>> think we can keep that commit. >>> >>> What about the "boot to black screen" problem, then? >> >> You mean this one? >> https://lkml.org/lkml/2013/7/30/814 > > Yes. :-) That is due to the broken _BQC provided by firmware, not that commit. After we enhance the quirk for _BQC, the problem will be gone. -Aaron -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 6a19bf7..431b22e 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -69,7 +69,7 @@ MODULE_AUTHOR("Bruno Ducrot"); MODULE_DESCRIPTION("ACPI Video Driver"); MODULE_LICENSE("GPL"); -static bool brightness_switch_enabled = 1; +static bool brightness_switch_enabled = 0; module_param(brightness_switch_enabled, bool, 0644); /*
Windows 8 requires all backlight interfaces to report 101 brightness values, and as a result we're starting to see machines with that many brightness levels in _BCL. For machines which send these notifications when the brightness up/down keys are pressed this means a lot of key presses to get any kind of noticeable change in brightness. For a while now we've had the ability to disable in-kernel handling of notifications via the video.brightness_switch_enabled parameter. Change this to default to off, and let userspace choose more reasonable increments for changing the brightness. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)