| Message ID | 1375766604-15455-1-git-send-email-vikas.sajjan@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Vikas, On 6 August 2013 10:53, Vikas Sajjan <vikas.sajjan@linaro.org> wrote: > While trying to get boot-logo up on exynos5420 SMDK which has eDP panel > connected with resolution 2560x1600, following error occured even with > IOMMU enabled: > [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer. > [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > > To address the cases where physically continous memory MAY NOT be a > mandatory requirement for fb, the patch adds a feature to get non physically > continous memory for fb if IOMMU is supported and if CONTIG memory allocation > fails. The patch looks fine. Just a small nit. Please use the word contiguous instead of continuous to refer to memory locations consistently in this patch. > > Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> > Signed-off-by: Arun Kumar <arun.kk@samsung.com> > Reviewed-by: Rob Clark <robdclark@gmail.com> > --- > changes since v2: > - addressed comments given by Tomasz Figa <tomasz.figa@gmail.com>. > > changes since v1: > - Modified to add the fallback patch if CONTIG alloc fails as suggested > by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>. > > - changed the commit message. > --- > drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > index 8e60bd6..faec77e 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > @@ -16,6 +16,7 @@ > #include <drm/drm_crtc.h> > #include <drm/drm_fb_helper.h> > #include <drm/drm_crtc_helper.h> > +#include <drm/exynos_drm.h> > > #include "exynos_drm_drv.h" > #include "exynos_drm_fb.h" > @@ -165,8 +166,17 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, > > size = mode_cmd.pitches[0] * mode_cmd.height; > > - /* 0 means to allocate physically continuous memory */ > - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); > + /* > + * If IOMMU is supported then try to get buffer from non physically > + * continous memory area. > + */ To make this more clear, you could say, "If physically contiguous memory allocation fails and if IOMMU is supported, try to ....." > + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { > + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, > + size); > + } > + > if (IS_ERR(exynos_gem_obj)) { > ret = PTR_ERR(exynos_gem_obj); > goto err_release_framebuffer; > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Vikas, On 08/06/2013 07:23 AM, Vikas Sajjan wrote: > While trying to get boot-logo up on exynos5420 SMDK which has eDP panel > connected with resolution 2560x1600, following error occured even with > IOMMU enabled: > [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer. > [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > > To address the cases where physically continous memory MAY NOT be a > mandatory requirement for fb, the patch adds a feature to get non physically > continous memory for fb if IOMMU is supported and if CONTIG memory allocation > fails. > > Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> > Signed-off-by: Arun Kumar <arun.kk@samsung.com> > Reviewed-by: Rob Clark <robdclark@gmail.com> > --- > changes since v2: > - addressed comments given by Tomasz Figa <tomasz.figa@gmail.com>. > > changes since v1: > - Modified to add the fallback patch if CONTIG alloc fails as suggested > by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>. > > - changed the commit message. > --- > drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > index 8e60bd6..faec77e 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > @@ -16,6 +16,7 @@ > #include <drm/drm_crtc.h> > #include <drm/drm_fb_helper.h> > #include <drm/drm_crtc_helper.h> > +#include <drm/exynos_drm.h> > > #include "exynos_drm_drv.h" > #include "exynos_drm_fb.h" > @@ -165,8 +166,17 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, > > size = mode_cmd.pitches[0] * mode_cmd.height; > > - /* 0 means to allocate physically continuous memory */ > - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); > + /* > + * If IOMMU is supported then try to get buffer from non physically > + * continous memory area. s/continous/continuous or better s/continous/contiguous Otherwise the patch looks good. But please note it has nothing to do with linux-media@vger.kernel.org, please drop this mailing list from Cc as I need to be constantly marking those patches as Non applicable in the patchwork. Thanks! Sylwester > + */ > + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { > + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, > + size); > + } > + > if (IS_ERR(exynos_gem_obj)) { > ret = PTR_ERR(exynos_gem_obj); > goto err_release_framebuffer; -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 8e60bd6..faec77e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -16,6 +16,7 @@ #include <drm/drm_crtc.h> #include <drm/drm_fb_helper.h> #include <drm/drm_crtc_helper.h> +#include <drm/exynos_drm.h> #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" @@ -165,8 +166,17 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, size = mode_cmd.pitches[0] * mode_cmd.height; - /* 0 means to allocate physically continuous memory */ - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); + /* + * If IOMMU is supported then try to get buffer from non physically + * continous memory area. + */ + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, + size); + } + if (IS_ERR(exynos_gem_obj)) { ret = PTR_ERR(exynos_gem_obj); goto err_release_framebuffer;