diff mbox

[v6,13/20] pwm: Add new pwm-samsung driver

Message ID 1374623475.SoL01ZHzWk@flatron (mailing list archive)
State New, archived
Headers show

Commit Message

Tomasz Figa July 23, 2013, 11:43 p.m. UTC
This patch introduces new Samsung PWM driver, which is completely
rewritten to be multiplatform- and DeviceTree-aware.

In addition, remaining problems of old driver are fixed, such as:
 - proper handling of hardware variants,
 - synchronization on SMP systems,
 - handling of boundary parameter values,
 - hardware sharing with PWM clocksource driver,
 - undefined state of PWM output after stopping PWM channel.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
---
 drivers/pwm/Makefile      |   1 +
 drivers/pwm/pwm-samsung.c | 618 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 619 insertions(+)
 create mode 100644 drivers/pwm/pwm-samsung.c

Changes since v5:
 - No functional changes, just following cosmetic improvements.
 - Used BIT() macro to define bits instead of shifting 1s directly.
 - Added comment about bit layout in TCON register.
 - Made macros used to define bits have more meaningful parameter names.
 - Updated commit message.

Comments

Andrew Bresticker Aug. 7, 2013, 7:35 p.m. UTC | #1
Hi Tomasz,

> +#ifndef CONFIG_CLKSRC_SAMSUNG_PWM
> +/*
> + * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers
> + * and some registers need access synchronization. If both drivers are
> + * compiled in, the spinlock is defined in the clocksource driver,
> + * otherwise following definition is used.
> + *
> + * Currently we do not need any more complex synchronization method
> + * because all the supported SoCs contain only one instance of the PWM
> + * IP. Should this change, both drivers will need to be modified to
> + * properly synchronize accesses to particular instances.
> + */
> +static DEFINE_SPINLOCK(samsung_pwm_lock);

Shouldn't this not be static?  It's declared in
clocksource/samsung_pwm.h whether or not the samsung_pwm_timer is
compiled in or not.

Thanks,
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Figa Aug. 7, 2013, 7:49 p.m. UTC | #2
On Wednesday 07 of August 2013 12:35:42 Andrew Bresticker wrote:
> Hi Tomasz,
> 
> > +#ifndef CONFIG_CLKSRC_SAMSUNG_PWM
> > +/*
> > + * PWM block is shared between pwm-samsung and samsung_pwm_timer
> > drivers + * and some registers need access synchronization. If both
> > drivers are + * compiled in, the spinlock is defined in the
> > clocksource driver, + * otherwise following definition is used.
> > + *
> > + * Currently we do not need any more complex synchronization method
> > + * because all the supported SoCs contain only one instance of the
> > PWM
> > + * IP. Should this change, both drivers will need to be modified to
> > + * properly synchronize accesses to particular instances.
> > + */
> > +static DEFINE_SPINLOCK(samsung_pwm_lock);
> 
> Shouldn't this not be static?

It should be static, when the clocksource driver is not used, but...

> It's declared in
> clocksource/samsung_pwm.h whether or not the samsung_pwm_timer is
> compiled in or not.

..it should not be defined as non-static in this case (= an ifdef is 
needed in this header). I believe I had this already fixed, not sure what 
happened with the fix...

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andrew Bresticker Aug. 8, 2013, 5:13 p.m. UTC | #3
> ..it should not be defined as non-static in this case (= an ifdef is
> needed in this header). I believe I had this already fixed, not sure what
> happened with the fix...

Perhaps this is it: https://patchwork.kernel.org/patch/2787271/.  That
should probably land with this patchset too.

Thanks,
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Figa Aug. 8, 2013, 9:27 p.m. UTC | #4
On Thursday 08 of August 2013 10:13:27 Andrew Bresticker wrote:
> > ..it should not be defined as non-static in this case (= an ifdef is
> > needed in this header). I believe I had this already fixed, not sure
> > what happened with the fix...
> 
> Perhaps this is it: https://patchwork.kernel.org/patch/2787271/.  That
> should probably land with this patchset too.

Oh yes, this is it.

I know what happened now. This series was already queued for 3.11 in 
Samsung tree. After a bit of testing in linux-next Bart found the build 
error and sent a fix, which was going to be merged for 3.11 as well. 
However since there have been some problems just before merge window 
started, this series had to be dropped, including the fixup patch.

Thanks for reporting. Let me try to sort this out.

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index aa94807..86a5771 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -12,6 +12,7 @@  obj-$(CONFIG_PWM_PUV3)		+= pwm-puv3.o
 obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
 obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung-legacy.o
+obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
 obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
new file mode 100644
index 0000000..fcc8b9a
--- /dev/null
+++ b/drivers/pwm/pwm-samsung.c
@@ -0,0 +1,618 @@ 
+/*
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * PWM driver for Samsung SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+
+/* For struct samsung_timer_variant and samsung_pwm_lock. */
+#include <clocksource/samsung_pwm.h>
+
+#define REG_TCFG0			0x00
+#define REG_TCFG1			0x04
+#define REG_TCON			0x08
+
+#define REG_TCNTB(chan)			(0x0c + ((chan) * 0xc))
+#define REG_TCMPB(chan)			(0x10 + ((chan) * 0xc))
+
+#define TCFG0_PRESCALER_MASK		0xff
+#define TCFG0_PRESCALER1_SHIFT		8
+
+#define TCFG1_MUX_MASK			0xf
+#define TCFG1_SHIFT(chan)		(4 * (chan))
+
+/*
+ * Each channel occupies 4 bits in TCON register, but there is a gap of 4
+ * bits (one channel) after channel 0, so channels have different numbering
+ * when accessing TCON register. See to_tcon_channel() function.
+ *
+ * In addition, the location of autoreload bit for channel 4 (TCON channel 5)
+ * in its set of bits is 2 as opposed to 3 for other channels.
+ */
+#define TCON_START(chan)		BIT(4 * (chan) + 0)
+#define TCON_MANUALUPDATE(chan)		BIT(4 * (chan) + 1)
+#define TCON_INVERT(chan)		BIT(4 * (chan) + 2)
+#define _TCON_AUTORELOAD(chan)		BIT(4 * (chan) + 3)
+#define _TCON_AUTORELOAD4(chan)		BIT(4 * (chan) + 2)
+#define TCON_AUTORELOAD(chan)		\
+	((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))
+
+/**
+ * struct samsung_pwm_channel - private data of PWM channel
+ * @period_ns:	current period in nanoseconds programmed to the hardware
+ * @duty_ns:	current duty time in nanoseconds programmed to the hardware
+ * @tin_ns:	time of one timer tick in nanoseconds with current timer rate
+ */
+struct samsung_pwm_channel {
+	u32 period_ns;
+	u32 duty_ns;
+	u32 tin_ns;
+};
+
+/**
+ * struct samsung_pwm_chip - private data of PWM chip
+ * @chip:		generic PWM chip
+ * @variant:		local copy of hardware variant data
+ * @inverter_mask:	inverter status for all channels - one bit per channel
+ * @base:		base address of mapped PWM registers
+ * @base_clk:		base clock used to drive the timers
+ * @tclk0:		external clock 0 (can be ERR_PTR if not present)
+ * @tclk1:		external clock 1 (can be ERR_PTR if not present)
+ */
+struct samsung_pwm_chip {
+	struct pwm_chip chip;
+	struct samsung_pwm_variant variant;
+	u8 inverter_mask;
+
+	void __iomem *base;
+	struct clk *base_clk;
+	struct clk *tclk0;
+	struct clk *tclk1;
+};
+
+#ifndef CONFIG_CLKSRC_SAMSUNG_PWM
+/*
+ * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers
+ * and some registers need access synchronization. If both drivers are
+ * compiled in, the spinlock is defined in the clocksource driver,
+ * otherwise following definition is used.
+ *
+ * Currently we do not need any more complex synchronization method
+ * because all the supported SoCs contain only one instance of the PWM
+ * IP. Should this change, both drivers will need to be modified to
+ * properly synchronize accesses to particular instances.
+ */
+static DEFINE_SPINLOCK(samsung_pwm_lock);
+#endif
+
+static inline
+struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct samsung_pwm_chip, chip);
+}
+
+static inline unsigned int to_tcon_channel(unsigned int channel)
+{
+	/* TCON register has a gap of 4 bits (1 channel) after channel 0 */
+	return (channel == 0) ? 0 : (channel + 1);
+}
+
+static void pwm_samsung_set_divisor(struct samsung_pwm_chip *pwm,
+				    unsigned int channel, u8 divisor)
+{
+	u8 shift = TCFG1_SHIFT(channel);
+	unsigned long flags;
+	u32 reg;
+	u8 bits;
+
+	bits = (fls(divisor) - 1) - pwm->variant.div_base;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	reg = readl(pwm->base + REG_TCFG1);
+	reg &= ~(TCFG1_MUX_MASK << shift);
+	reg |= bits << shift;
+	writel(reg, pwm->base + REG_TCFG1);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *chip, unsigned int chan)
+{
+	struct samsung_pwm_variant *variant = &chip->variant;
+	u32 reg;
+
+	reg = readl(chip->base + REG_TCFG1);
+	reg >>= TCFG1_SHIFT(chan);
+	reg &= TCFG1_MUX_MASK;
+
+	return (BIT(reg) & variant->tclk_mask) == 0;
+}
+
+static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *chip,
+					      unsigned int chan)
+{
+	unsigned long rate;
+	u32 reg;
+
+	rate = clk_get_rate(chip->base_clk);
+
+	reg = readl(chip->base + REG_TCFG0);
+	if (chan >= 2)
+		reg >>= TCFG0_PRESCALER1_SHIFT;
+	reg &= TCFG0_PRESCALER_MASK;
+
+	return rate / (reg + 1);
+}
+
+static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
+					  unsigned int chan, unsigned long freq)
+{
+	struct samsung_pwm_variant *variant = &chip->variant;
+	unsigned long rate;
+	struct clk *clk;
+	u8 div;
+
+	if (!pwm_samsung_is_tdiv(chip, chan)) {
+		clk = (chan < 2) ? chip->tclk0 : chip->tclk1;
+		if (!IS_ERR(clk)) {
+			rate = clk_get_rate(clk);
+			if (rate)
+				return rate;
+		}
+
+		dev_warn(chip->chip.dev,
+			"tclk of PWM %d is inoperational, using tdiv\n", chan);
+	}
+
+	rate = pwm_samsung_get_tin_rate(chip, chan);
+	dev_dbg(chip->chip.dev, "tin parent at %lu\n", rate);
+
+	/*
+	 * Compare minimum PWM frequency that can be achieved with possible
+	 * divider settings and choose the lowest divisor that can generate
+	 * frequencies lower than requested.
+	 */
+	for (div = variant->div_base; div < 4; ++div)
+		if ((rate >> (variant->bits + div)) < freq)
+			break;
+
+	pwm_samsung_set_divisor(chip, chan, BIT(div));
+
+	return rate >> div;
+}
+
+static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	struct samsung_pwm_channel *our_chan;
+
+	if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) {
+		dev_warn(chip->dev,
+			"tried to request PWM channel %d without output\n",
+			pwm->hwpwm);
+		return -EINVAL;
+	}
+
+	our_chan = devm_kzalloc(chip->dev, sizeof(*our_chan), GFP_KERNEL);
+	if (!our_chan)
+		return -ENOMEM;
+
+	pwm_set_chip_data(pwm, our_chan);
+
+	return 0;
+}
+
+static void pwm_samsung_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	pwm_set_chip_data(pwm, NULL);
+	devm_kfree(chip->dev, pwm_get_chip_data(pwm));
+}
+
+static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(our_chip->base + REG_TCON);
+
+	tcon &= ~TCON_START(tcon_chan);
+	tcon |= TCON_MANUALUPDATE(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
+	tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+
+	return 0;
+}
+
+static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(our_chip->base + REG_TCON);
+	tcon &= ~TCON_AUTORELOAD(tcon_chan);
+	writel(tcon, our_chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
+	u32 tin_ns = chan->tin_ns, tcnt, tcmp;
+
+	/*
+	 * We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits.
+	 */
+	if (period_ns > NSEC_PER_SEC)
+		return -ERANGE;
+
+	if (period_ns == chan->period_ns && duty_ns == chan->duty_ns)
+		return 0;
+
+	tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm));
+
+	/* We need tick count for calculation, not last tick. */
+	++tcnt;
+
+	/* Check to see if we are changing the clock rate of the PWM. */
+	if (chan->period_ns != period_ns) {
+		unsigned long tin_rate;
+		u32 period;
+
+		period = NSEC_PER_SEC / period_ns;
+
+		dev_dbg(our_chip->chip.dev, "duty_ns=%d, period_ns=%d (%u)\n",
+						duty_ns, period_ns, period);
+
+		tin_rate = pwm_samsung_calc_tin(our_chip, pwm->hwpwm, period);
+
+		dev_dbg(our_chip->chip.dev, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NSEC_PER_SEC / tin_rate;
+		tcnt = period_ns / tin_ns;
+	}
+
+	/* Period is too short. */
+	if (tcnt <= 1)
+		return -ERANGE;
+
+	/* Note that counters count down. */
+	tcmp = duty_ns / tin_ns;
+
+	/* 0% duty is not available */
+	if (!tcmp)
+		++tcmp;
+
+	tcmp = tcnt - tcmp;
+
+	/* Decrement to get tick numbers, instead of tick counts. */
+	--tcnt;
+	/* -1UL will give 100% duty. */
+	--tcmp;
+
+	dev_dbg(our_chip->chip.dev,
+				"tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt);
+
+	/* Update PWM registers. */
+	writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm));
+	writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm));
+
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		pwm_samsung_enable(chip, pwm);
+
+	chan->period_ns = period_ns;
+	chan->tin_ns = tin_ns;
+	chan->duty_ns = duty_ns;
+
+	return 0;
+}
+
+static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip,
+				   unsigned int channel, bool invert)
+{
+	unsigned int tcon_chan = to_tcon_channel(channel);
+	unsigned long flags;
+	u32 tcon;
+
+	spin_lock_irqsave(&samsung_pwm_lock, flags);
+
+	tcon = readl(chip->base + REG_TCON);
+
+	if (invert) {
+		chip->inverter_mask |= BIT(channel);
+		tcon |= TCON_INVERT(tcon_chan);
+	} else {
+		chip->inverter_mask &= ~BIT(channel);
+		tcon &= ~TCON_INVERT(tcon_chan);
+	}
+
+	writel(tcon, chip->base + REG_TCON);
+
+	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
+}
+
+static int pwm_samsung_set_polarity(struct pwm_chip *chip,
+				    struct pwm_device *pwm,
+				    enum pwm_polarity polarity)
+{
+	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
+	bool invert = (polarity == PWM_POLARITY_NORMAL);
+
+	/* Inverted means normal in the hardware. */
+	pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert);
+
+	return 0;
+}
+
+static const struct pwm_ops pwm_samsung_ops = {
+	.request	= pwm_samsung_request,
+	.free		= pwm_samsung_free,
+	.enable		= pwm_samsung_enable,
+	.disable	= pwm_samsung_disable,
+	.config		= pwm_samsung_config,
+	.set_polarity	= pwm_samsung_set_polarity,
+	.owner		= THIS_MODULE,
+};
+
+#ifdef CONFIG_OF
+static const struct samsung_pwm_variant s3c24xx_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= BIT(4),
+};
+
+static const struct samsung_pwm_variant s3c64xx_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= BIT(7) | BIT(6) | BIT(5),
+};
+
+static const struct samsung_pwm_variant s5p64x0_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
+static const struct samsung_pwm_variant s5pc100_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= BIT(5),
+};
+
+static const struct of_device_id samsung_pwm_matches[] = {
+	{ .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant },
+	{ .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant },
+	{ .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant },
+	{ .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant },
+	{ .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant },
+	{},
+};
+
+static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
+{
+	struct device_node *np = chip->chip.dev->of_node;
+	const struct of_device_id *match;
+	struct property *prop;
+	const __be32 *cur;
+	u32 val;
+
+	match = of_match_node(samsung_pwm_matches, np);
+	if (!match)
+		return -ENODEV;
+
+	memcpy(&chip->variant, match->data, sizeof(chip->variant));
+
+	of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
+		if (val >= SAMSUNG_PWM_NUM) {
+			dev_err(chip->chip.dev,
+				"%s: invalid channel index in samsung,pwm-outputs property\n",
+								__func__);
+			continue;
+		}
+		chip->variant.output_mask |= BIT(val);
+	}
+
+	return 0;
+}
+#else
+static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip)
+{
+	return -ENODEV;
+}
+#endif
+
+static int pwm_samsung_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct samsung_pwm_chip *chip;
+	struct resource *res;
+	unsigned int chan;
+	int ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->chip.dev = &pdev->dev;
+	chip->chip.ops = &pwm_samsung_ops;
+	chip->chip.base = -1;
+	chip->chip.npwm = SAMSUNG_PWM_NUM;
+	chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		ret = pwm_samsung_parse_dt(chip);
+		if (ret)
+			return ret;
+
+		chip->chip.of_xlate = of_pwm_xlate_with_flags;
+		chip->chip.of_pwm_n_cells = 3;
+	} else {
+		if (!pdev->dev.platform_data) {
+			dev_err(&pdev->dev, "no platform data specified\n");
+			return -EINVAL;
+		}
+
+		memcpy(&chip->variant, pdev->dev.platform_data,
+							sizeof(chip->variant));
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	chip->base_clk = devm_clk_get(&pdev->dev, "timers");
+	if (IS_ERR(chip->base_clk)) {
+		dev_err(dev, "failed to get timer base clk\n");
+		return PTR_ERR(chip->base_clk);
+	}
+
+	ret = clk_prepare_enable(chip->base_clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable base clock\n");
+		return ret;
+	}
+
+	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan)
+		if (chip->variant.output_mask & BIT(chan))
+			pwm_samsung_set_invert(chip, chan, true);
+
+	/* Following clocks are optional. */
+	chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0");
+	chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1");
+
+	platform_set_drvdata(pdev, chip);
+
+	ret = pwmchip_add(&chip->chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to register PWM chip\n");
+		clk_disable_unprepare(chip->base_clk);
+		return ret;
+	}
+
+	dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n",
+		clk_get_rate(chip->base_clk),
+		!IS_ERR(chip->tclk0) ? clk_get_rate(chip->tclk0) : 0,
+		!IS_ERR(chip->tclk1) ? clk_get_rate(chip->tclk1) : 0);
+
+	return 0;
+}
+
+static int pwm_samsung_remove(struct platform_device *pdev)
+{
+	struct samsung_pwm_chip *chip = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&chip->chip);
+	if (ret < 0)
+		return ret;
+
+	clk_disable_unprepare(chip->base_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwm_samsung_suspend(struct device *dev)
+{
+	struct samsung_pwm_chip *chip = dev_get_drvdata(dev);
+	unsigned int i;
+
+	/*
+	 * No one preserves these values during suspend so reset them.
+	 * Otherwise driver leaves PWM unconfigured if same values are
+	 * passed to pwm_config() next time.
+	 */
+	for (i = 0; i < SAMSUNG_PWM_NUM; ++i) {
+		struct pwm_device *pwm = &chip->chip.pwms[i];
+		struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
+
+		if (!chan)
+			continue;
+
+		chan->period_ns = 0;
+		chan->duty_ns = 0;
+	}
+
+	return 0;
+}
+
+static int pwm_samsung_resume(struct device *dev)
+{
+	struct samsung_pwm_chip *chip = dev_get_drvdata(dev);
+	unsigned int chan;
+
+	/*
+	 * Inverter setting must be preserved across suspend/resume
+	 * as nobody really seems to configure it more than once.
+	 */
+	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) {
+		if (chip->variant.output_mask & BIT(chan))
+			pwm_samsung_set_invert(chip, chan,
+					chip->inverter_mask & BIT(chan));
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops pwm_samsung_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pwm_samsung_suspend, pwm_samsung_resume)
+};
+
+static struct platform_driver pwm_samsung_driver = {
+	.driver		= {
+		.name	= "samsung-pwm",
+		.owner	= THIS_MODULE,
+		.pm	= &pwm_samsung_pm_ops,
+		.of_match_table = of_match_ptr(samsung_pwm_matches),
+	},
+	.probe		= pwm_samsung_probe,
+	.remove		= pwm_samsung_remove,
+};
+module_platform_driver(pwm_samsung_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
+MODULE_ALIAS("platform:samsung-pwm");