| Message ID | 1374758813-6539-3-git-send-email-oleksandr.kozaruk@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/25/13 14:26, Oleksandr Kozaruk wrote: > The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC, > known also as Phoenix and PhoenixLite. > > The TWL6030 and TWL6032 have GPADC with 17 and 19 channels > respectively. Some channels have current source and are used for > measuring voltage drop on resistive load for detecting battery ID > resistance, or measuring voltage drop on NTC resistors for external > temperature measurements. Some channels measure voltage, (i.e. battery > voltage), and have voltage dividers, thus, capable to scale voltage. > Some channels are dedicated for measuring die temperature. > > Some channels are calibrated in 2 points, having offsets from ideal > values kept in trim registers. This is used to correct measurements. > > The differences between GPADC in TWL6030 and TWL6032: > - 10 bit vs 12 bit ADC; > - 17 vs 19 channels; > - channels have different purpose(i.e. battery voltage > channel 8 vs channel 18); > - trim values are interpreted differently. > > Based on the driver patched from Balaji TK, Graeme Gregory, Ambresh K, > Girish S Ghongdemath. > > Signed-off-by: Balaji T K <balajitk@ti.com> > Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> > Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com> Multiple authors are done by having multiple MODULE_AUTHOR lines rather as one long string. See include/linux/module.h. I fixed that up and dealt with some trivial fuzz in the makefile/Kconfig. You might want to take advantage of devm_iio_allocate_device which has been introduced in the meantime and greatly simplifies error paths in IIO probe functions. Anyhow, applied to the togreg branch of iio.git Note I haven't taken the device tree patch. For that I would need and ack from the relevant maintainer(s). Personally I'd rather not touch device tree files unless i have to due to the high chance of merge conflicts occuring. I would expect the subarch maintainer to pick that one up (or to ask me to ;) Nice relatively clean driver for a somewhat 'interesting' bit of hardware. Thanks Jonathan > --- > drivers/iio/adc/Kconfig | 14 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/twl6030-gpadc.c | 1027 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 1042 insertions(+) > create mode 100644 drivers/iio/adc/twl6030-gpadc.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 93129ec..f8f9f18 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -160,6 +160,20 @@ config TI_AM335X_ADC > Say yes here to build support for Texas Instruments ADC > driver which is also a MFD client. > > +config TWL6030_GPADC > + tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" > + depends on TWL4030_CORE > + default n > + help > + Say yes here if you want support for the TWL6030/TWL6032 General > + Purpose A/D Converter. This will add support for battery type > + detection, battery voltage and temperature measurement, die > + temperature measurement, system supply voltage, audio accessory, > + USB ID detection. > + > + This driver can also be built as a module. If so, the module will be > + called twl6030-gpadc. > + > config VIPERBOARD_ADC > tristate "Viperboard ADC support" > depends on MFD_VIPERBOARD && USB > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 8f475d3..db430bd 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -17,4 +17,5 @@ obj-$(CONFIG_MAX1363) += max1363.o > obj-$(CONFIG_MCP320X) += mcp320x.o > obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o > obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o > +obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o > obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o > diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c > new file mode 100644 > index 0000000..2b63083 > --- /dev/null > +++ b/drivers/iio/adc/twl6030-gpadc.c > @@ -0,0 +1,1027 @@ > +/* > + * TWL6030 GPADC module driver > + * > + * Copyright (C) 2009-2013 Texas Instruments Inc. > + * Nishant Kamat <nskamat@ti.com> > + * Balaji T K <balajitk@ti.com> > + * Graeme Gregory <gg@slimlogic.co.uk> > + * Girish S Ghongdemath <girishsg@ti.com> > + * Ambresh K <ambresh@ti.com> > + * Oleksandr Kozaruk <oleksandr.kozaruk@ti.com > + * > + * Based on twl4030-madc.c > + * Copyright (C) 2008 Nokia Corporation > + * Mikko Ylinen <mikko.k.ylinen@nokia.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/of_platform.h> > +#include <linux/i2c/twl.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > + > +#define DRIVER_NAME "twl6030_gpadc" > + > +/* > + * twl6030 per TRM has 17 channels, and twl6032 has 19 channels > + * 2 test network channels are not used, > + * 2 die temperature channels are not used either, as it is not > + * defined how to convert ADC value to temperature > + */ > +#define TWL6030_GPADC_USED_CHANNELS 13 > +#define TWL6030_GPADC_MAX_CHANNELS 15 > +#define TWL6032_GPADC_USED_CHANNELS 15 > +#define TWL6032_GPADC_MAX_CHANNELS 19 > +#define TWL6030_GPADC_NUM_TRIM_REGS 16 > + > +#define TWL6030_GPADC_CTRL_P1 0x05 > + > +#define TWL6032_GPADC_GPSELECT_ISB 0x07 > +#define TWL6032_GPADC_CTRL_P1 0x08 > + > +#define TWL6032_GPADC_GPCH0_LSB 0x0d > +#define TWL6032_GPADC_GPCH0_MSB 0x0e > + > +#define TWL6030_GPADC_CTRL_P1_SP1 BIT(3) > + > +#define TWL6030_GPADC_GPCH0_LSB (0x29) > + > +#define TWL6030_GPADC_RT_SW1_EOC_MASK BIT(5) > + > +#define TWL6030_GPADC_TRIM1 0xCD > + > +#define TWL6030_REG_TOGGLE1 0x90 > +#define TWL6030_GPADCS BIT(1) > +#define TWL6030_GPADCR BIT(0) > + > +/** > + * struct twl6030_chnl_calib - channel calibration > + * @gain: slope coefficient for ideal curve > + * @gain_error: gain error > + * @offset_error: offset of the real curve > + */ > +struct twl6030_chnl_calib { > + s32 gain; > + s32 gain_error; > + s32 offset_error; > +}; > + > +/** > + * struct twl6030_ideal_code - GPADC calibration parameters > + * GPADC is calibrated in two points: close to the beginning and > + * to the and of the measurable input range > + * > + * @channel: channel number > + * @code1: ideal code for the input at the beginning > + * @code2: ideal code for at the end of the range > + * @volt1: voltage input at the beginning(low voltage) > + * @volt2: voltage input at the end(high voltage) > + */ > +struct twl6030_ideal_code { > + int channel; > + u16 code1; > + u16 code2; > + u16 volt1; > + u16 volt2; > +}; > + > +struct twl6030_gpadc_data; > + > +/** > + * struct twl6030_gpadc_platform_data - platform specific data > + * @nchannels: number of GPADC channels > + * @iio_channels: iio channels > + * @twl6030_ideal: pointer to calibration parameters > + * @start_conversion: pointer to ADC start conversion function > + * @channel_to_reg pointer to ADC function to convert channel to > + * register address for reading conversion result > + * @calibrate: pointer to calibration function > + */ > +struct twl6030_gpadc_platform_data { > + const int nchannels; > + const struct iio_chan_spec *iio_channels; > + const struct twl6030_ideal_code *ideal; > + int (*start_conversion)(int channel); > + u8 (*channel_to_reg)(int channel); > + int (*calibrate)(struct twl6030_gpadc_data *gpadc); > +}; > + > +/** > + * struct twl6030_gpadc_data - GPADC data > + * @dev: device pointer > + * @lock: mutual exclusion lock for the structure > + * @irq_complete: completion to signal end of conversion > + * @twl6030_cal_tbl: pointer to calibration data for each > + * channel with gain error and offset > + * @pdata: pointer to device specific data > + */ > +struct twl6030_gpadc_data { > + struct device *dev; > + struct mutex lock; > + struct completion irq_complete; > + struct twl6030_chnl_calib *twl6030_cal_tbl; > + const struct twl6030_gpadc_platform_data *pdata; > +}; > + > +/* > + * channels 11, 12, 13, 15 and 16 have no calibration data > + * calibration offset is same for channels 1, 3, 4, 5 > + * > + * The data is taken from GPADC_TRIM registers description. > + * GPADC_TRIM registers keep difference between the code measured > + * at volt1 and volt2 input voltages and corresponding code1 and code2 > + */ > +static const struct twl6030_ideal_code > + twl6030_ideal[TWL6030_GPADC_USED_CHANNELS] = { > + [0] = { /* ch 0, external, battery type, resistor value */ > + .channel = 0, > + .code1 = 116, > + .code2 = 745, > + .volt1 = 141, > + .volt2 = 910, > + }, > + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ > + .channel = 1, > + .code1 = 82, > + .code2 = 900, > + .volt1 = 100, > + .volt2 = 1100, > + }, > + [2] = { /* ch 2, external, audio accessory/general purpose */ > + .channel = 2, > + .code1 = 55, > + .code2 = 818, > + .volt1 = 101, > + .volt2 = 1499, > + }, > + [3] = { /* ch 3, external, general purpose */ > + .channel = 3, > + .code1 = 82, > + .code2 = 900, > + .volt1 = 100, > + .volt2 = 1100, > + }, > + [4] = { /* ch 4, external, temperature measurement/general purpose */ > + .channel = 4, > + .code1 = 82, > + .code2 = 900, > + .volt1 = 100, > + .volt2 = 1100, > + }, > + [5] = { /* ch 5, external, general purpose */ > + .channel = 5, > + .code1 = 82, > + .code2 = 900, > + .volt1 = 100, > + .volt2 = 1100, > + }, > + [6] = { /* ch 6, external, general purpose */ > + .channel = 6, > + .code1 = 82, > + .code2 = 900, > + .volt1 = 100, > + .volt2 = 1100, > + }, > + [7] = { /* ch 7, internal, main battery */ > + .channel = 7, > + .code1 = 614, > + .code2 = 941, > + .volt1 = 3001, > + .volt2 = 4599, > + }, > + [8] = { /* ch 8, internal, backup battery */ > + .channel = 8, > + .code1 = 82, > + .code2 = 688, > + .volt1 = 501, > + .volt2 = 4203, > + }, > + [9] = { /* ch 9, internal, external charger input */ > + .channel = 9, > + .code1 = 182, > + .code2 = 818, > + .volt1 = 2001, > + .volt2 = 8996, > + }, > + [10] = { /* ch 10, internal, VBUS */ > + .channel = 10, > + .code1 = 149, > + .code2 = 818, > + .volt1 = 1001, > + .volt2 = 5497, > + }, > + [11] = { /* ch 11, internal, VBUS charging current */ > + .channel = 11, > + }, > + /* ch 12, internal, Die temperature */ > + /* ch 13, internal, Die temperature */ > + [12] = { /* ch 14, internal, USB ID line */ > + .channel = 14, > + .code1 = 48, > + .code2 = 714, > + .volt1 = 323, > + .volt2 = 4800, > + }, > +}; > + > +static const struct twl6030_ideal_code > + twl6032_ideal[TWL6032_GPADC_USED_CHANNELS] = { > + [0] = { /* ch 0, external, battery type, resistor value */ > + .channel = 0, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 440, > + .volt2 = 1000, > + }, > + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ > + .channel = 1, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 440, > + .volt2 = 1000, > + }, > + [2] = { /* ch 2, external, audio accessory/general purpose */ > + .channel = 2, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 660, > + .volt2 = 1500, > + }, > + [3] = { /* ch 3, external, temperature with external diode/general > + purpose */ > + .channel = 3, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 440, > + .volt2 = 1000, > + }, > + [4] = { /* ch 4, external, temperature measurement/general purpose */ > + .channel = 4, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 440, > + .volt2 = 1000, > + }, > + [5] = { /* ch 5, external, general purpose */ > + .channel = 5, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 440, > + .volt2 = 1000, > + }, > + [6] = { /* ch 6, external, general purpose */ > + .channel = 6, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 440, > + .volt2 = 1000, > + }, > + [7] = { /* ch7, internal, system supply */ > + .channel = 7, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 2200, > + .volt2 = 5000, > + }, > + [8] = { /* ch8, internal, backup battery */ > + .channel = 8, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 2200, > + .volt2 = 5000, > + }, > + [9] = { /* ch 9, internal, external charger input */ > + .channel = 9, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 3960, > + .volt2 = 9000, > + }, > + [10] = { /* ch10, internal, VBUS */ > + .channel = 10, > + .code1 = 150, > + .code2 = 751, > + .volt1 = 1000, > + .volt2 = 5000, > + }, > + [11] = { /* ch 11, internal, VBUS DC-DC output current */ > + .channel = 11, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 660, > + .volt2 = 1500, > + }, > + /* ch 12, internal, Die temperature */ > + /* ch 13, internal, Die temperature */ > + [12] = { /* ch 14, internal, USB ID line */ > + .channel = 14, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 2420, > + .volt2 = 5500, > + }, > + /* ch 15, internal, test network */ > + /* ch 16, internal, test network */ > + [13] = { /* ch 17, internal, battery charging current */ > + .channel = 17, > + }, > + [14] = { /* ch 18, internal, battery voltage */ > + .channel = 18, > + .code1 = 1441, > + .code2 = 3276, > + .volt1 = 2200, > + .volt2 = 5000, > + }, > +}; > + > +static inline int twl6030_gpadc_write(u8 reg, u8 val) > +{ > + return twl_i2c_write_u8(TWL6030_MODULE_GPADC, val, reg); > +} > + > +static inline int twl6030_gpadc_read(u8 reg, u8 *val) > +{ > + > + return twl_i2c_read(TWL6030_MODULE_GPADC, val, reg, 2); > +} > + > +static int twl6030_gpadc_enable_irq(u8 mask) > +{ > + int ret; > + > + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_LINE_B); > + if (ret < 0) > + return ret; > + > + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_STS_B); > + > + return ret; > +} > + > +static void twl6030_gpadc_disable_irq(u8 mask) > +{ > + twl6030_interrupt_mask(mask, REG_INT_MSK_LINE_B); > + twl6030_interrupt_mask(mask, REG_INT_MSK_STS_B); > +} > + > +static irqreturn_t twl6030_gpadc_irq_handler(int irq, void *indio_dev) > +{ > + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); > + > + complete(&gpadc->irq_complete); > + > + return IRQ_HANDLED; > +} > + > +static int twl6030_start_conversion(int channel) > +{ > + return twl6030_gpadc_write(TWL6030_GPADC_CTRL_P1, > + TWL6030_GPADC_CTRL_P1_SP1); > +} > + > +static int twl6032_start_conversion(int channel) > +{ > + int ret; > + > + ret = twl6030_gpadc_write(TWL6032_GPADC_GPSELECT_ISB, channel); > + if (ret) > + return ret; > + > + return twl6030_gpadc_write(TWL6032_GPADC_CTRL_P1, > + TWL6030_GPADC_CTRL_P1_SP1); > +} > + > +static u8 twl6030_channel_to_reg(int channel) > +{ > + return TWL6030_GPADC_GPCH0_LSB + 2 * channel; > +} > + > +static u8 twl6032_channel_to_reg(int channel) > +{ > + /* > + * for any prior chosen channel, when the conversion is ready > + * the result is avalable in GPCH0_LSB, GPCH0_MSB. > + */ > + > + return TWL6032_GPADC_GPCH0_LSB; > +} > + > +static int twl6030_gpadc_lookup(const struct twl6030_ideal_code *ideal, > + int channel, int size) > +{ > + int i; > + > + for (i = 0; i < size; i++) > + if (ideal[i].channel == channel) > + break; > + > + return i; > +} > + > +static int twl6030_channel_calibrated(const struct twl6030_gpadc_platform_data > + *pdata, int channel) > +{ > + const struct twl6030_ideal_code *ideal = pdata->ideal; > + int i; > + > + i = twl6030_gpadc_lookup(ideal, channel, pdata->nchannels); > + /* not calibrated channels have 0 in all structure members */ > + return pdata->ideal[i].code2; > +} > + > +static int twl6030_gpadc_make_correction(struct twl6030_gpadc_data *gpadc, > + int channel, int raw_code) > +{ > + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; > + int corrected_code; > + int i; > + > + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); > + corrected_code = ((raw_code * 1000) - > + gpadc->twl6030_cal_tbl[i].offset_error) / > + gpadc->twl6030_cal_tbl[i].gain_error; > + > + return corrected_code; > +} > + > +static int twl6030_gpadc_get_raw(struct twl6030_gpadc_data *gpadc, > + int channel, int *res) > +{ > + u8 reg = gpadc->pdata->channel_to_reg(channel); > + __le16 val; > + int raw_code; > + int ret; > + > + ret = twl6030_gpadc_read(reg, (u8 *)&val); > + if (ret) { > + dev_dbg(gpadc->dev, "unable to read register 0x%X\n", reg); > + return ret; > + } > + > + raw_code = le16_to_cpu(val); > + dev_dbg(gpadc->dev, "GPADC raw code: %d", raw_code); > + > + if (twl6030_channel_calibrated(gpadc->pdata, channel)) > + *res = twl6030_gpadc_make_correction(gpadc, channel, raw_code); > + else > + *res = raw_code; > + > + return ret; > +} > + > +static int twl6030_gpadc_get_processed(struct twl6030_gpadc_data *gpadc, > + int channel, int *val) > +{ > + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; > + int corrected_code; > + int channel_value; > + int i; > + int ret; > + > + ret = twl6030_gpadc_get_raw(gpadc, channel, &corrected_code); > + if (ret) > + return ret; > + > + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); > + channel_value = corrected_code * > + gpadc->twl6030_cal_tbl[i].gain; > + > + /* Shift back into mV range */ > + channel_value /= 1000; > + > + dev_dbg(gpadc->dev, "GPADC corrected code: %d", corrected_code); > + dev_dbg(gpadc->dev, "GPADC value: %d", channel_value); > + > + *val = channel_value; > + > + return ret; > +} > + > +static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, > + int *val, int *val2, long mask) > +{ > + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); > + int ret; > + long timeout; > + > + mutex_lock(&gpadc->lock); > + > + ret = gpadc->pdata->start_conversion(chan->channel); > + if (ret) { > + dev_err(gpadc->dev, "failed to start conversion\n"); > + goto err; > + } > + /* wait for conversion to complete */ > + timeout = wait_for_completion_interruptible_timeout( > + &gpadc->irq_complete, msecs_to_jiffies(5000)); > + if (timeout == 0) { > + ret = -ETIMEDOUT; > + goto err; > + } else if (timeout < 0) { > + goto err; > + ret = -EINTR; > + } > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = twl6030_gpadc_get_raw(gpadc, chan->channel, val); > + ret = ret ? -EIO : IIO_VAL_INT; > + break; > + > + case IIO_CHAN_INFO_PROCESSED: > + ret = twl6030_gpadc_get_processed(gpadc, chan->channel, val); > + ret = ret ? -EIO : IIO_VAL_INT; > + break; > + > + default: > + break; > + } > +err: > + mutex_unlock(&gpadc->lock); > + > + return ret; > +} > + > +/* > + * The GPADC channels are calibrated using a two point calibration method. > + * The channels measured with two known values: volt1 and volt2, and > + * ideal corresponding output codes are known: code1, code2. > + * The difference(d1, d2) between ideal and measured codes stored in trim > + * registers. > + * The goal is to find offset and gain of the real curve for each calibrated > + * channel. > + * gain: k = 1 + ((d2 - d1) / (x2 - x1)) > + * offset: b = d1 + (k - 1) * x1 > + */ > +static void twl6030_calibrate_channel(struct twl6030_gpadc_data *gpadc, > + int channel, int d1, int d2) > +{ > + int b, k, gain, x1, x2, i; > + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; > + > + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); > + > + /* Gain */ > + gain = ((ideal[i].volt2 - ideal[i].volt1) * 1000) / > + (ideal[i].code2 - ideal[i].code1); > + > + x1 = ideal[i].code1; > + x2 = ideal[i].code2; > + > + /* k - real curve gain */ > + k = 1000 + (((d2 - d1) * 1000) / (x2 - x1)); > + > + /* b - offset of the real curve gain */ > + b = (d1 * 1000) - (k - 1000) * x1; > + > + gpadc->twl6030_cal_tbl[i].gain = gain; > + gpadc->twl6030_cal_tbl[i].gain_error = k; > + gpadc->twl6030_cal_tbl[i].offset_error = b; > + > + dev_dbg(gpadc->dev, "GPADC d1 for Chn: %d = %d\n", channel, d1); > + dev_dbg(gpadc->dev, "GPADC d2 for Chn: %d = %d\n", channel, d2); > + dev_dbg(gpadc->dev, "GPADC x1 for Chn: %d = %d\n", channel, x1); > + dev_dbg(gpadc->dev, "GPADC x2 for Chn: %d = %d\n", channel, x2); > + dev_dbg(gpadc->dev, "GPADC Gain for Chn: %d = %d\n", channel, gain); > + dev_dbg(gpadc->dev, "GPADC k for Chn: %d = %d\n", channel, k); > + dev_dbg(gpadc->dev, "GPADC b for Chn: %d = %d\n", channel, b); > +} > + > +static inline int twl6030_gpadc_get_trim_offset(s8 d) > +{ > + /* > + * XXX NOTE! > + * bit 0 - sign, bit 7 - reserved, 6..1 - trim value > + * though, the documentation states that trim value > + * is absolute value, the correct conversion results are > + * obtained if the value is interpreted as 2's complement. > + */ > + __u32 temp = ((d & 0x7f) >> 1) | ((d & 1) << 6); > + > + return sign_extend32(temp, 6); > +} > + > +static int twl6030_calibration(struct twl6030_gpadc_data *gpadc) > +{ > + int ret; > + int chn; > + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; > + s8 d1, d2; > + > + /* > + * for calibration two measurements have been performed at > + * factory, for some channels, during the production test and > + * have been stored in registers. This two stored values are > + * used to correct the measurements. The values represent > + * offsets for the given input from the output on ideal curve. > + */ > + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, > + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); > + if (ret < 0) { > + dev_err(gpadc->dev, "calibration failed\n"); > + return ret; > + } > + > + for (chn = 0; chn < TWL6030_GPADC_MAX_CHANNELS; chn++) { > + > + switch (chn) { > + case 0: > + d1 = trim_regs[0]; > + d2 = trim_regs[1]; > + break; > + case 1: > + case 3: > + case 4: > + case 5: > + case 6: > + d1 = trim_regs[4]; > + d2 = trim_regs[5]; > + break; > + case 2: > + d1 = trim_regs[12]; > + d2 = trim_regs[13]; > + break; > + case 7: > + d1 = trim_regs[6]; > + d2 = trim_regs[7]; > + break; > + case 8: > + d1 = trim_regs[2]; > + d2 = trim_regs[3]; > + break; > + case 9: > + d1 = trim_regs[8]; > + d2 = trim_regs[9]; > + break; > + case 10: > + d1 = trim_regs[10]; > + d2 = trim_regs[11]; > + break; > + case 14: > + d1 = trim_regs[14]; > + d2 = trim_regs[15]; > + break; > + default: > + continue; > + } > + > + d1 = twl6030_gpadc_get_trim_offset(d1); > + d2 = twl6030_gpadc_get_trim_offset(d2); > + > + twl6030_calibrate_channel(gpadc, chn, d1, d2); > + } > + > + return 0; > +} > + > +static int twl6032_get_trim_value(u8 *trim_regs, unsigned int reg0, > + unsigned int reg1, unsigned int mask0, unsigned int mask1, > + unsigned int shift0) > +{ > + int val; > + > + val = (trim_regs[reg0] & mask0) << shift0; > + val |= (trim_regs[reg1] & mask1) >> 1; > + if (trim_regs[reg1] & 0x01) > + val = -val; > + > + return val; > +} > + > +static int twl6032_calibration(struct twl6030_gpadc_data *gpadc) > +{ > + int chn, d1 = 0, d2 = 0, temp; > + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; > + int ret; > + > + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, > + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); > + if (ret < 0) { > + dev_err(gpadc->dev, "calibration failed\n"); > + return ret; > + } > + > + /* > + * Loop to calculate the value needed for returning voltages from > + * GPADC not values. > + * > + * gain is calculated to 3 decimal places fixed point. > + */ > + for (chn = 0; chn < TWL6032_GPADC_MAX_CHANNELS; chn++) { > + > + switch (chn) { > + case 0: > + case 1: > + case 2: > + case 3: > + case 4: > + case 5: > + case 6: > + case 11: > + case 14: > + d1 = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > + 0x06, 2); > + d2 = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, > + 0x06, 2); > + break; > + case 8: > + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > + 0x06, 2); > + d1 = temp + twl6032_get_trim_value(trim_regs, 7, 6, > + 0x18, 0x1E, 1); > + > + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3F, > + 0x06, 2); > + d2 = temp + twl6032_get_trim_value(trim_regs, 9, 7, > + 0x1F, 0x06, 2); > + break; > + case 9: > + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > + 0x06, 2); > + d1 = temp + twl6032_get_trim_value(trim_regs, 13, 11, > + 0x18, 0x1E, 1); > + > + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, > + 0x06, 2); > + d2 = temp + twl6032_get_trim_value(trim_regs, 15, 13, > + 0x1F, 0x06, 1); > + break; > + case 10: > + d1 = twl6032_get_trim_value(trim_regs, 10, 8, 0x0f, > + 0x0E, 3); > + d2 = twl6032_get_trim_value(trim_regs, 14, 12, 0x0f, > + 0x0E, 3); > + break; > + case 7: > + case 18: > + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > + 0x06, 2); > + > + d1 = (trim_regs[4] & 0x7E) >> 1; > + if (trim_regs[4] & 0x01) > + d1 = -d1; > + d1 += temp; > + > + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, > + 0x06, 2); > + > + d2 = (trim_regs[5] & 0xFE) >> 1; > + if (trim_regs[5] & 0x01) > + d2 = -d2; > + > + d2 += temp; > + break; > + default: > + /* No data for other channels */ > + continue; > + } > + > + twl6030_calibrate_channel(gpadc, chn, d1, d2); > + } > + > + return 0; > +} > + > +#define TWL6030_GPADC_CHAN(chn, _type, chan_info) { \ > + .type = _type, \ > + .channel = chn, \ > + .info_mask_separate = BIT(chan_info), \ > + .indexed = 1, \ > +} > + > +static const struct iio_chan_spec twl6030_gpadc_iio_channels[] = { > + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), > + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), > + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), > + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > +}; > + > +static const struct iio_chan_spec twl6032_gpadc_iio_channels[] = { > + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), > + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), > + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > + TWL6030_GPADC_CHAN(17, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), > + TWL6030_GPADC_CHAN(18, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > +}; > + > +static const struct iio_info twl6030_gpadc_iio_info = { > + .read_raw = &twl6030_gpadc_read_raw, > + .driver_module = THIS_MODULE, > +}; > + > +static const struct twl6030_gpadc_platform_data twl6030_pdata = { > + .iio_channels = twl6030_gpadc_iio_channels, > + .nchannels = TWL6030_GPADC_USED_CHANNELS, > + .ideal = twl6030_ideal, > + .start_conversion = twl6030_start_conversion, > + .channel_to_reg = twl6030_channel_to_reg, > + .calibrate = twl6030_calibration, > +}; > + > +static const struct twl6030_gpadc_platform_data twl6032_pdata = { > + .iio_channels = twl6032_gpadc_iio_channels, > + .nchannels = TWL6032_GPADC_USED_CHANNELS, > + .ideal = twl6032_ideal, > + .start_conversion = twl6032_start_conversion, > + .channel_to_reg = twl6032_channel_to_reg, > + .calibrate = twl6032_calibration, > +}; > + > +static const struct of_device_id of_twl6030_match_tbl[] = { > + { > + .compatible = "ti,twl6030-gpadc", > + .data = &twl6030_pdata, > + }, > + { > + .compatible = "ti,twl6032-gpadc", > + .data = &twl6032_pdata, > + }, > + { /* end */ } > +}; > + > +static int twl6030_gpadc_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct twl6030_gpadc_data *gpadc; > + const struct twl6030_gpadc_platform_data *pdata; > + const struct of_device_id *match; > + struct iio_dev *indio_dev; > + int irq; > + int ret; > + > + match = of_match_device(of_match_ptr(of_twl6030_match_tbl), dev); > + if (!match) > + return -EINVAL; > + > + pdata = match->data; > + > + indio_dev = iio_device_alloc(sizeof(*gpadc)); > + if (!indio_dev) { > + dev_err(dev, "failed allocating iio device\n"); > + ret = -ENOMEM; > + } > + > + gpadc = iio_priv(indio_dev); > + > + gpadc->twl6030_cal_tbl = devm_kzalloc(dev, > + sizeof(*gpadc->twl6030_cal_tbl) * > + pdata->nchannels, GFP_KERNEL); > + if (!gpadc->twl6030_cal_tbl) > + goto err_free_device; > + > + gpadc->dev = dev; > + gpadc->pdata = pdata; > + > + platform_set_drvdata(pdev, indio_dev); > + mutex_init(&gpadc->lock); > + init_completion(&gpadc->irq_complete); > + > + ret = pdata->calibrate(gpadc); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to read calibration registers\n"); > + goto err_free_device; > + } > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) { > + dev_err(&pdev->dev, "failed to get irq\n"); > + goto err_free_device; > + } > + > + ret = request_threaded_irq(irq, NULL, twl6030_gpadc_irq_handler, > + IRQF_ONESHOT, "twl6030_gpadc", indio_dev); > + if (ret) { > + dev_dbg(&pdev->dev, "could not request irq\n"); > + goto err_free_device; > + } > + > + ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to enable GPADC interrupt\n"); > + goto err_free_irq; > + } > + > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, > + TWL6030_REG_TOGGLE1); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to enable GPADC module\n"); > + goto err_free_irq; > + } > + > + indio_dev->name = DRIVER_NAME; > + indio_dev->dev.parent = dev; > + indio_dev->info = &twl6030_gpadc_iio_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = pdata->iio_channels; > + indio_dev->num_channels = pdata->nchannels; > + > + ret = iio_device_register(indio_dev); > + if (ret) > + goto err_free_irq; > + > + return ret; > + > +err_free_irq: > + free_irq(irq, indio_dev); > +err_free_device: > + iio_device_free(indio_dev); > + > + return ret; > +} > + > +static int twl6030_gpadc_remove(struct platform_device *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + > + twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); > + free_irq(platform_get_irq(pdev, 0), indio_dev); > + iio_device_unregister(indio_dev); > + iio_device_free(indio_dev); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int twl6030_gpadc_suspend(struct device *pdev) > +{ > + int ret; > + > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR, > + TWL6030_REG_TOGGLE1); > + if (ret) > + dev_err(pdev, "error reseting GPADC (%d)!\n", ret); > + > + return 0; > +}; > + > +static int twl6030_gpadc_resume(struct device *pdev) > +{ > + int ret; > + > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, > + TWL6030_REG_TOGGLE1); > + if (ret) > + dev_err(pdev, "error setting GPADC (%d)!\n", ret); > + > + return 0; > +}; > +#endif > + > +static SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, > + twl6030_gpadc_resume); > + > +static struct platform_driver twl6030_gpadc_driver = { > + .probe = twl6030_gpadc_probe, > + .remove = twl6030_gpadc_remove, > + .driver = { > + .name = DRIVER_NAME, > + .owner = THIS_MODULE, > + .pm = &twl6030_gpadc_pm_ops, > + .of_match_table = of_twl6030_match_tbl, > + }, > +}; > + > +module_platform_driver(twl6030_gpadc_driver); > + > +MODULE_ALIAS("platform: " DRIVER_NAME); > +MODULE_AUTHOR("Balaji T K <balajitk@ti.com>, Graeme Gregory <gg@slimlogic.co.uk>, Oleksandr Kozaruk <oleksandr.kozaruk@ti.com"); > +MODULE_DESCRIPTION("twl6030 ADC driver"); > +MODULE_LICENSE("GPL"); > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/15/13 06:45, Oleksandr Kozaruk wrote: > Hello Jonathan, > > Thank you for the review and valuable comments. > > Multiple authors are done by having multiple MODULE_AUTHOR lines rather as > one long string. See include/linux/module.h. I fixed that up and > dealt with some trivial fuzz in the makefile/Kconfig. > > > You might want to take advantage of devm_iio_allocate_device > which has been introduced in the meantime and greatly simplifies error > paths in IIO probe functions. > > > Should I make new version of the patch, or just prepare a new patch that patches the patch? I've applied the current one with the MODULE_AUTHOR line broken up. If you want to do the devm_ patch then that will want to be as an additional patch on top of the togreg branch of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git > > Regards, > Sasha. > > > > Anyhow, applied to the togreg branch of iio.git > > Note I haven't taken the device tree patch. For that I would need and ack > from the relevant maintainer(s). Personally I'd rather not touch device tree > files unless i have to due to the high chance of merge conflicts occuring. > I would expect the subarch maintainer to pick that one up (or to ask me > to ;) > > Nice relatively clean driver for a somewhat 'interesting' bit of hardware. > > Thanks > > Jonathan > > > --- > > drivers/iio/adc/Kconfig | 14 + > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/twl6030-gpadc.c | 1027 +++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 1042 insertions(+) > > create mode 100644 drivers/iio/adc/twl6030-gpadc.c > > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > index 93129ec..f8f9f18 100644 > > --- a/drivers/iio/adc/Kconfig > > +++ b/drivers/iio/adc/Kconfig > > @@ -160,6 +160,20 @@ config TI_AM335X_ADC > > Say yes here to build support for Texas Instruments ADC > > driver which is also a MFD client. > > > > +config TWL6030_GPADC > > + tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" > > + depends on TWL4030_CORE > > + default n > > + help > > + Say yes here if you want support for the TWL6030/TWL6032 General > > + Purpose A/D Converter. This will add support for battery type > > + detection, battery voltage and temperature measurement, die > > + temperature measurement, system supply voltage, audio accessory, > > + USB ID detection. > > + > > + This driver can also be built as a module. If so, the module will be > > + called twl6030-gpadc. > > + > > config VIPERBOARD_ADC > > tristate "Viperboard ADC support" > > depends on MFD_VIPERBOARD && USB > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > > index 8f475d3..db430bd 100644 > > --- a/drivers/iio/adc/Makefile > > +++ b/drivers/iio/adc/Makefile > > @@ -17,4 +17,5 @@ obj-$(CONFIG_MAX1363) += max1363.o > > obj-$(CONFIG_MCP320X) += mcp320x.o > > obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o > > obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o > > +obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o > > obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o > > diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c > > new file mode 100644 > > index 0000000..2b63083 > > --- /dev/null > > +++ b/drivers/iio/adc/twl6030-gpadc.c > > @@ -0,0 +1,1027 @@ > > +/* > > + * TWL6030 GPADC module driver > > + * > > + * Copyright (C) 2009-2013 Texas Instruments Inc. > > + * Nishant Kamat <nskamat@ti.com <mailto:nskamat@ti.com>> > > + * Balaji T K <balajitk@ti.com <mailto:balajitk@ti.com>> > > + * Graeme Gregory <gg@slimlogic.co.uk <mailto:gg@slimlogic.co.uk>> > > + * Girish S Ghongdemath <girishsg@ti.com <mailto:girishsg@ti.com>> > > + * Ambresh K <ambresh@ti.com <mailto:ambresh@ti.com>> > > + * Oleksandr Kozaruk <oleksandr.kozaruk@ti.com <mailto:oleksandr.kozaruk@ti.com> > > + * > > + * Based on twl4030-madc.c > > + * Copyright (C) 2008 Nokia Corporation > > + * Mikko Ylinen <mikko.k.ylinen@nokia.com <mailto:mikko.k.ylinen@nokia.com>> > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License > > + * version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, but > > + * WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > > + * 02110-1301 USA > > + * > > + */ > > +#include <linux/init.h> > > +#include <linux/interrupt.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > +#include <linux/of_platform.h> > > +#include <linux/i2c/twl.h> > > +#include <linux/iio/iio.h> > > +#include <linux/iio/sysfs.h> > > + > > +#define DRIVER_NAME "twl6030_gpadc" > > + > > +/* > > + * twl6030 per TRM has 17 channels, and twl6032 has 19 channels > > + * 2 test network channels are not used, > > + * 2 die temperature channels are not used either, as it is not > > + * defined how to convert ADC value to temperature > > + */ > > +#define TWL6030_GPADC_USED_CHANNELS 13 > > +#define TWL6030_GPADC_MAX_CHANNELS 15 > > +#define TWL6032_GPADC_USED_CHANNELS 15 > > +#define TWL6032_GPADC_MAX_CHANNELS 19 > > +#define TWL6030_GPADC_NUM_TRIM_REGS 16 > > + > > +#define TWL6030_GPADC_CTRL_P1 0x05 > > + > > +#define TWL6032_GPADC_GPSELECT_ISB 0x07 > > +#define TWL6032_GPADC_CTRL_P1 0x08 > > + > > +#define TWL6032_GPADC_GPCH0_LSB 0x0d > > +#define TWL6032_GPADC_GPCH0_MSB 0x0e > > + > > +#define TWL6030_GPADC_CTRL_P1_SP1 BIT(3) > > + > > +#define TWL6030_GPADC_GPCH0_LSB (0x29) > > + > > +#define TWL6030_GPADC_RT_SW1_EOC_MASK BIT(5) > > + > > +#define TWL6030_GPADC_TRIM1 0xCD > > + > > +#define TWL6030_REG_TOGGLE1 0x90 > > +#define TWL6030_GPADCS BIT(1) > > +#define TWL6030_GPADCR BIT(0) > > + > > +/** > > + * struct twl6030_chnl_calib - channel calibration > > + * @gain: slope coefficient for ideal curve > > + * @gain_error: gain error > > + * @offset_error: offset of the real curve > > + */ > > +struct twl6030_chnl_calib { > > + s32 gain; > > + s32 gain_error; > > + s32 offset_error; > > +}; > > + > > +/** > > + * struct twl6030_ideal_code - GPADC calibration parameters > > + * GPADC is calibrated in two points: close to the beginning and > > + * to the and of the measurable input range > > + * > > + * @channel: channel number > > + * @code1: ideal code for the input at the beginning > > + * @code2: ideal code for at the end of the range > > + * @volt1: voltage input at the beginning(low voltage) > > + * @volt2: voltage input at the end(high voltage) > > + */ > > +struct twl6030_ideal_code { > > + int channel; > > + u16 code1; > > + u16 code2; > > + u16 volt1; > > + u16 volt2; > > +}; > > + > > +struct twl6030_gpadc_data; > > + > > +/** > > + * struct twl6030_gpadc_platform_data - platform specific data > > + * @nchannels: number of GPADC channels > > + * @iio_channels: iio channels > > + * @twl6030_ideal: pointer to calibration parameters > > + * @start_conversion: pointer to ADC start conversion function > > + * @channel_to_reg pointer to ADC function to convert channel to > > + * register address for reading conversion result > > + * @calibrate: pointer to calibration function > > + */ > > +struct twl6030_gpadc_platform_data { > > + const int nchannels; > > + const struct iio_chan_spec *iio_channels; > > + const struct twl6030_ideal_code *ideal; > > + int (*start_conversion)(int channel); > > + u8 (*channel_to_reg)(int channel); > > + int (*calibrate)(struct twl6030_gpadc_data *gpadc); > > +}; > > + > > +/** > > + * struct twl6030_gpadc_data - GPADC data > > + * @dev: device pointer > > + * @lock: mutual exclusion lock for the structure > > + * @irq_complete: completion to signal end of conversion > > + * @twl6030_cal_tbl: pointer to calibration data for each > > + * channel with gain error and offset > > + * @pdata: pointer to device specific data > > + */ > > +struct twl6030_gpadc_data { > > + struct device *dev; > > + struct mutex lock; > > + struct completion irq_complete; > > + struct twl6030_chnl_calib *twl6030_cal_tbl; > > + const struct twl6030_gpadc_platform_data *pdata; > > +}; > > + > > +/* > > + * channels 11, 12, 13, 15 and 16 have no calibration data > > + * calibration offset is same for channels 1, 3, 4, 5 > > + * > > + * The data is taken from GPADC_TRIM registers description. > > + * GPADC_TRIM registers keep difference between the code measured > > + * at volt1 and volt2 input voltages and corresponding code1 and code2 > > + */ > > +static const struct twl6030_ideal_code > > + twl6030_ideal[TWL6030_GPADC_USED_CHANNELS] = { > > + [0] = { /* ch 0, external, battery type, resistor value */ > > + .channel = 0, > > + .code1 = 116, > > + .code2 = 745, > > + .volt1 = 141, > > + .volt2 = 910, > > + }, > > + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ > > + .channel = 1, > > + .code1 = 82, > > + .code2 = 900, > > + .volt1 = 100, > > + .volt2 = 1100, > > + }, > > + [2] = { /* ch 2, external, audio accessory/general purpose */ > > + .channel = 2, > > + .code1 = 55, > > + .code2 = 818, > > + .volt1 = 101, > > + .volt2 = 1499, > > + }, > > + [3] = { /* ch 3, external, general purpose */ > > + .channel = 3, > > + .code1 = 82, > > + .code2 = 900, > > + .volt1 = 100, > > + .volt2 = 1100, > > + }, > > + [4] = { /* ch 4, external, temperature measurement/general purpose */ > > + .channel = 4, > > + .code1 = 82, > > + .code2 = 900, > > + .volt1 = 100, > > + .volt2 = 1100, > > + }, > > + [5] = { /* ch 5, external, general purpose */ > > + .channel = 5, > > + .code1 = 82, > > + .code2 = 900, > > + .volt1 = 100, > > + .volt2 = 1100, > > + }, > > + [6] = { /* ch 6, external, general purpose */ > > + .channel = 6, > > + .code1 = 82, > > + .code2 = 900, > > + .volt1 = 100, > > + .volt2 = 1100, > > + }, > > + [7] = { /* ch 7, internal, main battery */ > > + .channel = 7, > > + .code1 = 614, > > + .code2 = 941, > > + .volt1 = 3001, > > + .volt2 = 4599, > > + }, > > + [8] = { /* ch 8, internal, backup battery */ > > + .channel = 8, > > + .code1 = 82, > > + .code2 = 688, > > + .volt1 = 501, > > + .volt2 = 4203, > > + }, > > + [9] = { /* ch 9, internal, external charger input */ > > + .channel = 9, > > + .code1 = 182, > > + .code2 = 818, > > + .volt1 = 2001, > > + .volt2 = 8996, > > + }, > > + [10] = { /* ch 10, internal, VBUS */ > > + .channel = 10, > > + .code1 = 149, > > + .code2 = 818, > > + .volt1 = 1001, > > + .volt2 = 5497, > > + }, > > + [11] = { /* ch 11, internal, VBUS charging current */ > > + .channel = 11, > > + }, > > + /* ch 12, internal, Die temperature */ > > + /* ch 13, internal, Die temperature */ > > + [12] = { /* ch 14, internal, USB ID line */ > > + .channel = 14, > > + .code1 = 48, > > + .code2 = 714, > > + .volt1 = 323, > > + .volt2 = 4800, > > + }, > > +}; > > + > > +static const struct twl6030_ideal_code > > + twl6032_ideal[TWL6032_GPADC_USED_CHANNELS] = { > > + [0] = { /* ch 0, external, battery type, resistor value */ > > + .channel = 0, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 440, > > + .volt2 = 1000, > > + }, > > + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ > > + .channel = 1, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 440, > > + .volt2 = 1000, > > + }, > > + [2] = { /* ch 2, external, audio accessory/general purpose */ > > + .channel = 2, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 660, > > + .volt2 = 1500, > > + }, > > + [3] = { /* ch 3, external, temperature with external diode/general > > + purpose */ > > + .channel = 3, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 440, > > + .volt2 = 1000, > > + }, > > + [4] = { /* ch 4, external, temperature measurement/general purpose */ > > + .channel = 4, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 440, > > + .volt2 = 1000, > > + }, > > + [5] = { /* ch 5, external, general purpose */ > > + .channel = 5, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 440, > > + .volt2 = 1000, > > + }, > > + [6] = { /* ch 6, external, general purpose */ > > + .channel = 6, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 440, > > + .volt2 = 1000, > > + }, > > + [7] = { /* ch7, internal, system supply */ > > + .channel = 7, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 2200, > > + .volt2 = 5000, > > + }, > > + [8] = { /* ch8, internal, backup battery */ > > + .channel = 8, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 2200, > > + .volt2 = 5000, > > + }, > > + [9] = { /* ch 9, internal, external charger input */ > > + .channel = 9, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 3960, > > + .volt2 = 9000, > > + }, > > + [10] = { /* ch10, internal, VBUS */ > > + .channel = 10, > > + .code1 = 150, > > + .code2 = 751, > > + .volt1 = 1000, > > + .volt2 = 5000, > > + }, > > + [11] = { /* ch 11, internal, VBUS DC-DC output current */ > > + .channel = 11, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 660, > > + .volt2 = 1500, > > + }, > > + /* ch 12, internal, Die temperature */ > > + /* ch 13, internal, Die temperature */ > > + [12] = { /* ch 14, internal, USB ID line */ > > + .channel = 14, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 2420, > > + .volt2 = 5500, > > + }, > > + /* ch 15, internal, test network */ > > + /* ch 16, internal, test network */ > > + [13] = { /* ch 17, internal, battery charging current */ > > + .channel = 17, > > + }, > > + [14] = { /* ch 18, internal, battery voltage */ > > + .channel = 18, > > + .code1 = 1441, > > + .code2 = 3276, > > + .volt1 = 2200, > > + .volt2 = 5000, > > + }, > > +}; > > + > > +static inline int twl6030_gpadc_write(u8 reg, u8 val) > > +{ > > + return twl_i2c_write_u8(TWL6030_MODULE_GPADC, val, reg); > > +} > > + > > +static inline int twl6030_gpadc_read(u8 reg, u8 *val) > > +{ > > + > > + return twl_i2c_read(TWL6030_MODULE_GPADC, val, reg, 2); > > +} > > + > > +static int twl6030_gpadc_enable_irq(u8 mask) > > +{ > > + int ret; > > + > > + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_LINE_B); > > + if (ret < 0) > > + return ret; > > + > > + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_STS_B); > > + > > + return ret; > > +} > > + > > +static void twl6030_gpadc_disable_irq(u8 mask) > > +{ > > + twl6030_interrupt_mask(mask, REG_INT_MSK_LINE_B); > > + twl6030_interrupt_mask(mask, REG_INT_MSK_STS_B); > > +} > > + > > +static irqreturn_t twl6030_gpadc_irq_handler(int irq, void *indio_dev) > > +{ > > + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); > > + > > + complete(&gpadc->irq_complete); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int twl6030_start_conversion(int channel) > > +{ > > + return twl6030_gpadc_write(TWL6030_GPADC_CTRL_P1, > > + TWL6030_GPADC_CTRL_P1_SP1); > > +} > > + > > +static int twl6032_start_conversion(int channel) > > +{ > > + int ret; > > + > > + ret = twl6030_gpadc_write(TWL6032_GPADC_GPSELECT_ISB, channel); > > + if (ret) > > + return ret; > > + > > + return twl6030_gpadc_write(TWL6032_GPADC_CTRL_P1, > > + TWL6030_GPADC_CTRL_P1_SP1); > > +} > > + > > +static u8 twl6030_channel_to_reg(int channel) > > +{ > > + return TWL6030_GPADC_GPCH0_LSB + 2 * channel; > > +} > > + > > +static u8 twl6032_channel_to_reg(int channel) > > +{ > > + /* > > + * for any prior chosen channel, when the conversion is ready > > + * the result is avalable in GPCH0_LSB, GPCH0_MSB. > > + */ > > + > > + return TWL6032_GPADC_GPCH0_LSB; > > +} > > + > > +static int twl6030_gpadc_lookup(const struct twl6030_ideal_code *ideal, > > + int channel, int size) > > +{ > > + int i; > > + > > + for (i = 0; i < size; i++) > > + if (ideal[i].channel == channel) > > + break; > > + > > + return i; > > +} > > + > > +static int twl6030_channel_calibrated(const struct twl6030_gpadc_platform_data > > + *pdata, int channel) > > +{ > > + const struct twl6030_ideal_code *ideal = pdata->ideal; > > + int i; > > + > > + i = twl6030_gpadc_lookup(ideal, channel, pdata->nchannels); > > + /* not calibrated channels have 0 in all structure members */ > > + return pdata->ideal[i].code2; > > +} > > + > > +static int twl6030_gpadc_make_correction(struct twl6030_gpadc_data *gpadc, > > + int channel, int raw_code) > > +{ > > + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; > > + int corrected_code; > > + int i; > > + > > + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); > > + corrected_code = ((raw_code * 1000) - > > + gpadc->twl6030_cal_tbl[i].offset_error) / > > + gpadc->twl6030_cal_tbl[i].gain_error; > > + > > + return corrected_code; > > +} > > + > > +static int twl6030_gpadc_get_raw(struct twl6030_gpadc_data *gpadc, > > + int channel, int *res) > > +{ > > + u8 reg = gpadc->pdata->channel_to_reg(channel); > > + __le16 val; > > + int raw_code; > > + int ret; > > + > > + ret = twl6030_gpadc_read(reg, (u8 *)&val); > > + if (ret) { > > + dev_dbg(gpadc->dev, "unable to read register 0x%X\n", reg); > > + return ret; > > + } > > + > > + raw_code = le16_to_cpu(val); > > + dev_dbg(gpadc->dev, "GPADC raw code: %d", raw_code); > > + > > + if (twl6030_channel_calibrated(gpadc->pdata, channel)) > > + *res = twl6030_gpadc_make_correction(gpadc, channel, raw_code); > > + else > > + *res = raw_code; > > + > > + return ret; > > +} > > + > > +static int twl6030_gpadc_get_processed(struct twl6030_gpadc_data *gpadc, > > + int channel, int *val) > > +{ > > + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; > > + int corrected_code; > > + int channel_value; > > + int i; > > + int ret; > > + > > + ret = twl6030_gpadc_get_raw(gpadc, channel, &corrected_code); > > + if (ret) > > + return ret; > > + > > + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); > > + channel_value = corrected_code * > > + gpadc->twl6030_cal_tbl[i].gain; > > + > > + /* Shift back into mV range */ > > + channel_value /= 1000; > > + > > + dev_dbg(gpadc->dev, "GPADC corrected code: %d", corrected_code); > > + dev_dbg(gpadc->dev, "GPADC value: %d", channel_value); > > + > > + *val = channel_value; > > + > > + return ret; > > +} > > + > > +static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); > > + int ret; > > + long timeout; > > + > > + mutex_lock(&gpadc->lock); > > + > > + ret = gpadc->pdata->start_conversion(chan->channel); > > + if (ret) { > > + dev_err(gpadc->dev, "failed to start conversion\n"); > > + goto err; > > + } > > + /* wait for conversion to complete */ > > + timeout = wait_for_completion_interruptible_timeout( > > + &gpadc->irq_complete, msecs_to_jiffies(5000)); > > + if (timeout == 0) { > > + ret = -ETIMEDOUT; > > + goto err; > > + } else if (timeout < 0) { > > + goto err; > > + ret = -EINTR; > > + } > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + ret = twl6030_gpadc_get_raw(gpadc, chan->channel, val); > > + ret = ret ? -EIO : IIO_VAL_INT; > > + break; > > + > > + case IIO_CHAN_INFO_PROCESSED: > > + ret = twl6030_gpadc_get_processed(gpadc, chan->channel, val); > > + ret = ret ? -EIO : IIO_VAL_INT; > > + break; > > + > > + default: > > + break; > > + } > > +err: > > + mutex_unlock(&gpadc->lock); > > + > > + return ret; > > +} > > + > > +/* > > + * The GPADC channels are calibrated using a two point calibration method. > > + * The channels measured with two known values: volt1 and volt2, and > > + * ideal corresponding output codes are known: code1, code2. > > + * The difference(d1, d2) between ideal and measured codes stored in trim > > + * registers. > > + * The goal is to find offset and gain of the real curve for each calibrated > > + * channel. > > + * gain: k = 1 + ((d2 - d1) / (x2 - x1)) > > + * offset: b = d1 + (k - 1) * x1 > > + */ > > +static void twl6030_calibrate_channel(struct twl6030_gpadc_data *gpadc, > > + int channel, int d1, int d2) > > +{ > > + int b, k, gain, x1, x2, i; > > + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; > > + > > + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); > > + > > + /* Gain */ > > + gain = ((ideal[i].volt2 - ideal[i].volt1) * 1000) / > > + (ideal[i].code2 - ideal[i].code1); > > + > > + x1 = ideal[i].code1; > > + x2 = ideal[i].code2; > > + > > + /* k - real curve gain */ > > + k = 1000 + (((d2 - d1) * 1000) / (x2 - x1)); > > + > > + /* b - offset of the real curve gain */ > > + b = (d1 * 1000) - (k - 1000) * x1; > > + > > + gpadc->twl6030_cal_tbl[i].gain = gain; > > + gpadc->twl6030_cal_tbl[i].gain_error = k; > > + gpadc->twl6030_cal_tbl[i].offset_error = b; > > + > > + dev_dbg(gpadc->dev, "GPADC d1 for Chn: %d = %d\n", channel, d1); > > + dev_dbg(gpadc->dev, "GPADC d2 for Chn: %d = %d\n", channel, d2); > > + dev_dbg(gpadc->dev, "GPADC x1 for Chn: %d = %d\n", channel, x1); > > + dev_dbg(gpadc->dev, "GPADC x2 for Chn: %d = %d\n", channel, x2); > > + dev_dbg(gpadc->dev, "GPADC Gain for Chn: %d = %d\n", channel, gain); > > + dev_dbg(gpadc->dev, "GPADC k for Chn: %d = %d\n", channel, k); > > + dev_dbg(gpadc->dev, "GPADC b for Chn: %d = %d\n", channel, b); > > +} > > + > > +static inline int twl6030_gpadc_get_trim_offset(s8 d) > > +{ > > + /* > > + * XXX NOTE! > > + * bit 0 - sign, bit 7 - reserved, 6..1 - trim value > > + * though, the documentation states that trim value > > + * is absolute value, the correct conversion results are > > + * obtained if the value is interpreted as 2's complement. > > + */ > > + __u32 temp = ((d & 0x7f) >> 1) | ((d & 1) << 6); > > + > > + return sign_extend32(temp, 6); > > +} > > + > > +static int twl6030_calibration(struct twl6030_gpadc_data *gpadc) > > +{ > > + int ret; > > + int chn; > > + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; > > + s8 d1, d2; > > + > > + /* > > + * for calibration two measurements have been performed at > > + * factory, for some channels, during the production test and > > + * have been stored in registers. This two stored values are > > + * used to correct the measurements. The values represent > > + * offsets for the given input from the output on ideal curve. > > + */ > > + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, > > + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); > > + if (ret < 0) { > > + dev_err(gpadc->dev, "calibration failed\n"); > > + return ret; > > + } > > + > > + for (chn = 0; chn < TWL6030_GPADC_MAX_CHANNELS; chn++) { > > + > > + switch (chn) { > > + case 0: > > + d1 = trim_regs[0]; > > + d2 = trim_regs[1]; > > + break; > > + case 1: > > + case 3: > > + case 4: > > + case 5: > > + case 6: > > + d1 = trim_regs[4]; > > + d2 = trim_regs[5]; > > + break; > > + case 2: > > + d1 = trim_regs[12]; > > + d2 = trim_regs[13]; > > + break; > > + case 7: > > + d1 = trim_regs[6]; > > + d2 = trim_regs[7]; > > + break; > > + case 8: > > + d1 = trim_regs[2]; > > + d2 = trim_regs[3]; > > + break; > > + case 9: > > + d1 = trim_regs[8]; > > + d2 = trim_regs[9]; > > + break; > > + case 10: > > + d1 = trim_regs[10]; > > + d2 = trim_regs[11]; > > + break; > > + case 14: > > + d1 = trim_regs[14]; > > + d2 = trim_regs[15]; > > + break; > > + default: > > + continue; > > + } > > + > > + d1 = twl6030_gpadc_get_trim_offset(d1); > > + d2 = twl6030_gpadc_get_trim_offset(d2); > > + > > + twl6030_calibrate_channel(gpadc, chn, d1, d2); > > + } > > + > > + return 0; > > +} > > + > > +static int twl6032_get_trim_value(u8 *trim_regs, unsigned int reg0, > > + unsigned int reg1, unsigned int mask0, unsigned int mask1, > > + unsigned int shift0) > > +{ > > + int val; > > + > > + val = (trim_regs[reg0] & mask0) << shift0; > > + val |= (trim_regs[reg1] & mask1) >> 1; > > + if (trim_regs[reg1] & 0x01) > > + val = -val; > > + > > + return val; > > +} > > + > > +static int twl6032_calibration(struct twl6030_gpadc_data *gpadc) > > +{ > > + int chn, d1 = 0, d2 = 0, temp; > > + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; > > + int ret; > > + > > + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, > > + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); > > + if (ret < 0) { > > + dev_err(gpadc->dev, "calibration failed\n"); > > + return ret; > > + } > > + > > + /* > > + * Loop to calculate the value needed for returning voltages from > > + * GPADC not values. > > + * > > + * gain is calculated to 3 decimal places fixed point. > > + */ > > + for (chn = 0; chn < TWL6032_GPADC_MAX_CHANNELS; chn++) { > > + > > + switch (chn) { > > + case 0: > > + case 1: > > + case 2: > > + case 3: > > + case 4: > > + case 5: > > + case 6: > > + case 11: > > + case 14: > > + d1 = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > > + 0x06, 2); > > + d2 = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, > > + 0x06, 2); > > + break; > > + case 8: > > + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > > + 0x06, 2); > > + d1 = temp + twl6032_get_trim_value(trim_regs, 7, 6, > > + 0x18, 0x1E, 1); > > + > > + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3F, > > + 0x06, 2); > > + d2 = temp + twl6032_get_trim_value(trim_regs, 9, 7, > > + 0x1F, 0x06, 2); > > + break; > > + case 9: > > + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > > + 0x06, 2); > > + d1 = temp + twl6032_get_trim_value(trim_regs, 13, 11, > > + 0x18, 0x1E, 1); > > + > > + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, > > + 0x06, 2); > > + d2 = temp + twl6032_get_trim_value(trim_regs, 15, 13, > > + 0x1F, 0x06, 1); > > + break; > > + case 10: > > + d1 = twl6032_get_trim_value(trim_regs, 10, 8, 0x0f, > > + 0x0E, 3); > > + d2 = twl6032_get_trim_value(trim_regs, 14, 12, 0x0f, > > + 0x0E, 3); > > + break; > > + case 7: > > + case 18: > > + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, > > + 0x06, 2); > > + > > + d1 = (trim_regs[4] & 0x7E) >> 1; > > + if (trim_regs[4] & 0x01) > > + d1 = -d1; > > + d1 += temp; > > + > > + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, > > + 0x06, 2); > > + > > + d2 = (trim_regs[5] & 0xFE) >> 1; > > + if (trim_regs[5] & 0x01) > > + d2 = -d2; > > + > > + d2 += temp; > > + break; > > + default: > > + /* No data for other channels */ > > + continue; > > + } > > + > > + twl6030_calibrate_channel(gpadc, chn, d1, d2); > > + } > > + > > + return 0; > > +} > > + > > +#define TWL6030_GPADC_CHAN(chn, _type, chan_info) { \ > > + .type = _type, \ > > + .channel = chn, \ > > + .info_mask_separate = BIT(chan_info), \ > > + .indexed = 1, \ > > +} > > + > > +static const struct iio_chan_spec twl6030_gpadc_iio_channels[] = { > > + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), > > + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), > > + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), > > + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > +}; > > + > > +static const struct iio_chan_spec twl6032_gpadc_iio_channels[] = { > > + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), > > + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), > > + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > + TWL6030_GPADC_CHAN(17, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), > > + TWL6030_GPADC_CHAN(18, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), > > +}; > > + > > +static const struct iio_info twl6030_gpadc_iio_info = { > > + .read_raw = &twl6030_gpadc_read_raw, > > + .driver_module = THIS_MODULE, > > +}; > > + > > +static const struct twl6030_gpadc_platform_data twl6030_pdata = { > > + .iio_channels = twl6030_gpadc_iio_channels, > > + .nchannels = TWL6030_GPADC_USED_CHANNELS, > > + .ideal = twl6030_ideal, > > + .start_conversion = twl6030_start_conversion, > > + .channel_to_reg = twl6030_channel_to_reg, > > + .calibrate = twl6030_calibration, > > +}; > > + > > +static const struct twl6030_gpadc_platform_data twl6032_pdata = { > > + .iio_channels = twl6032_gpadc_iio_channels, > > + .nchannels = TWL6032_GPADC_USED_CHANNELS, > > + .ideal = twl6032_ideal, > > + .start_conversion = twl6032_start_conversion, > > + .channel_to_reg = twl6032_channel_to_reg, > > + .calibrate = twl6032_calibration, > > +}; > > + > > +static const struct of_device_id of_twl6030_match_tbl[] = { > > + { > > + .compatible = "ti,twl6030-gpadc", > > + .data = &twl6030_pdata, > > + }, > > + { > > + .compatible = "ti,twl6032-gpadc", > > + .data = &twl6032_pdata, > > + }, > > + { /* end */ } > > +}; > > + > > +static int twl6030_gpadc_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct twl6030_gpadc_data *gpadc; > > + const struct twl6030_gpadc_platform_data *pdata; > > + const struct of_device_id *match; > > + struct iio_dev *indio_dev; > > + int irq; > > + int ret; > > + > > + match = of_match_device(of_match_ptr(of_twl6030_match_tbl), dev); > > + if (!match) > > + return -EINVAL; > > + > > + pdata = match->data; > > + > > + indio_dev = iio_device_alloc(sizeof(*gpadc)); > > + if (!indio_dev) { > > + dev_err(dev, "failed allocating iio device\n"); > > + ret = -ENOMEM; > > + } > > + > > + gpadc = iio_priv(indio_dev); > > + > > + gpadc->twl6030_cal_tbl = devm_kzalloc(dev, > > + sizeof(*gpadc->twl6030_cal_tbl) * > > + pdata->nchannels, GFP_KERNEL); > > + if (!gpadc->twl6030_cal_tbl) > > + goto err_free_device; > > + > > + gpadc->dev = dev; > > + gpadc->pdata = pdata; > > + > > + platform_set_drvdata(pdev, indio_dev); > > + mutex_init(&gpadc->lock); > > + init_completion(&gpadc->irq_complete); > > + > > + ret = pdata->calibrate(gpadc); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to read calibration registers\n"); > > + goto err_free_device; > > + } > > + > > + irq = platform_get_irq(pdev, 0); > > + if (irq < 0) { > > + dev_err(&pdev->dev, "failed to get irq\n"); > > + goto err_free_device; > > + } > > + > > + ret = request_threaded_irq(irq, NULL, twl6030_gpadc_irq_handler, > > + IRQF_ONESHOT, "twl6030_gpadc", indio_dev); > > + if (ret) { > > + dev_dbg(&pdev->dev, "could not request irq\n"); > > + goto err_free_device; > > + } > > + > > + ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to enable GPADC interrupt\n"); > > + goto err_free_irq; > > + } > > + > > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, > > + TWL6030_REG_TOGGLE1); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to enable GPADC module\n"); > > + goto err_free_irq; > > + } > > + > > + indio_dev->name = DRIVER_NAME; > > + indio_dev->dev.parent = dev; > > + indio_dev->info = &twl6030_gpadc_iio_info; > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->channels = pdata->iio_channels; > > + indio_dev->num_channels = pdata->nchannels; > > + > > + ret = iio_device_register(indio_dev); > > + if (ret) > > + goto err_free_irq; > > + > > + return ret; > > + > > +err_free_irq: > > + free_irq(irq, indio_dev); > > +err_free_device: > > + iio_device_free(indio_dev); > > + > > + return ret; > > +} > > + > > +static int twl6030_gpadc_remove(struct platform_device *pdev) > > +{ > > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > > + > > + twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); > > + free_irq(platform_get_irq(pdev, 0), indio_dev); > > + iio_device_unregister(indio_dev); > > + iio_device_free(indio_dev); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM_SLEEP > > +static int twl6030_gpadc_suspend(struct device *pdev) > > +{ > > + int ret; > > + > > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR, > > + TWL6030_REG_TOGGLE1); > > + if (ret) > > + dev_err(pdev, "error reseting GPADC (%d)!\n", ret); > > + > > + return 0; > > +}; > > + > > +static int twl6030_gpadc_resume(struct device *pdev) > > +{ > > + int ret; > > + > > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, > > + TWL6030_REG_TOGGLE1); > > + if (ret) > > + dev_err(pdev, "error setting GPADC (%d)!\n", ret); > > + > > + return 0; > > +}; > > +#endif > > + > > +static SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, > > + twl6030_gpadc_resume); > > + > > +static struct platform_driver twl6030_gpadc_driver = { > > + .probe = twl6030_gpadc_probe, > > + .remove = twl6030_gpadc_remove, > > + .driver = { > > + .name = DRIVER_NAME, > > + .owner = THIS_MODULE, > > + .pm = &twl6030_gpadc_pm_ops, > > + .of_match_table = of_twl6030_match_tbl, > > + }, > > +}; > > + > > +module_platform_driver(twl6030_gpadc_driver); > > + > > +MODULE_ALIAS("platform: " DRIVER_NAME); > > +MODULE_AUTHOR("Balaji T K <balajitk@ti.com <mailto:balajitk@ti.com>>, Graeme Gregory <gg@slimlogic.co.uk <mailto:gg@slimlogic.co.uk>>, > Oleksandr Kozaruk <oleksandr.kozaruk@ti.com <mailto:oleksandr.kozaruk@ti.com>"); > > +MODULE_DESCRIPTION("twl6030 ADC driver"); > > +MODULE_LICENSE("GPL"); > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org <mailto:majordomo@vger.kernel.org> > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > > > > -- > Regards, > Oleksandr Kozaruk | embedded developer > GlobalLogic > M +38.067.944.7905 > www.globallogic.com <http://www.globallogic.com/> > <http://www.globallogic.com/> > http://www.globallogic.com/email_disclaimer.txt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 93129ec..f8f9f18 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -160,6 +160,20 @@ config TI_AM335X_ADC Say yes here to build support for Texas Instruments ADC driver which is also a MFD client. +config TWL6030_GPADC + tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" + depends on TWL4030_CORE + default n + help + Say yes here if you want support for the TWL6030/TWL6032 General + Purpose A/D Converter. This will add support for battery type + detection, battery voltage and temperature measurement, die + temperature measurement, system supply voltage, audio accessory, + USB ID detection. + + This driver can also be built as a module. If so, the module will be + called twl6030-gpadc. + config VIPERBOARD_ADC tristate "Viperboard ADC support" depends on MFD_VIPERBOARD && USB diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 8f475d3..db430bd 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -17,4 +17,5 @@ obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o +obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c new file mode 100644 index 0000000..2b63083 --- /dev/null +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -0,0 +1,1027 @@ +/* + * TWL6030 GPADC module driver + * + * Copyright (C) 2009-2013 Texas Instruments Inc. + * Nishant Kamat <nskamat@ti.com> + * Balaji T K <balajitk@ti.com> + * Graeme Gregory <gg@slimlogic.co.uk> + * Girish S Ghongdemath <girishsg@ti.com> + * Ambresh K <ambresh@ti.com> + * Oleksandr Kozaruk <oleksandr.kozaruk@ti.com + * + * Based on twl4030-madc.c + * Copyright (C) 2008 Nokia Corporation + * Mikko Ylinen <mikko.k.ylinen@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/i2c/twl.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define DRIVER_NAME "twl6030_gpadc" + +/* + * twl6030 per TRM has 17 channels, and twl6032 has 19 channels + * 2 test network channels are not used, + * 2 die temperature channels are not used either, as it is not + * defined how to convert ADC value to temperature + */ +#define TWL6030_GPADC_USED_CHANNELS 13 +#define TWL6030_GPADC_MAX_CHANNELS 15 +#define TWL6032_GPADC_USED_CHANNELS 15 +#define TWL6032_GPADC_MAX_CHANNELS 19 +#define TWL6030_GPADC_NUM_TRIM_REGS 16 + +#define TWL6030_GPADC_CTRL_P1 0x05 + +#define TWL6032_GPADC_GPSELECT_ISB 0x07 +#define TWL6032_GPADC_CTRL_P1 0x08 + +#define TWL6032_GPADC_GPCH0_LSB 0x0d +#define TWL6032_GPADC_GPCH0_MSB 0x0e + +#define TWL6030_GPADC_CTRL_P1_SP1 BIT(3) + +#define TWL6030_GPADC_GPCH0_LSB (0x29) + +#define TWL6030_GPADC_RT_SW1_EOC_MASK BIT(5) + +#define TWL6030_GPADC_TRIM1 0xCD + +#define TWL6030_REG_TOGGLE1 0x90 +#define TWL6030_GPADCS BIT(1) +#define TWL6030_GPADCR BIT(0) + +/** + * struct twl6030_chnl_calib - channel calibration + * @gain: slope coefficient for ideal curve + * @gain_error: gain error + * @offset_error: offset of the real curve + */ +struct twl6030_chnl_calib { + s32 gain; + s32 gain_error; + s32 offset_error; +}; + +/** + * struct twl6030_ideal_code - GPADC calibration parameters + * GPADC is calibrated in two points: close to the beginning and + * to the and of the measurable input range + * + * @channel: channel number + * @code1: ideal code for the input at the beginning + * @code2: ideal code for at the end of the range + * @volt1: voltage input at the beginning(low voltage) + * @volt2: voltage input at the end(high voltage) + */ +struct twl6030_ideal_code { + int channel; + u16 code1; + u16 code2; + u16 volt1; + u16 volt2; +}; + +struct twl6030_gpadc_data; + +/** + * struct twl6030_gpadc_platform_data - platform specific data + * @nchannels: number of GPADC channels + * @iio_channels: iio channels + * @twl6030_ideal: pointer to calibration parameters + * @start_conversion: pointer to ADC start conversion function + * @channel_to_reg pointer to ADC function to convert channel to + * register address for reading conversion result + * @calibrate: pointer to calibration function + */ +struct twl6030_gpadc_platform_data { + const int nchannels; + const struct iio_chan_spec *iio_channels; + const struct twl6030_ideal_code *ideal; + int (*start_conversion)(int channel); + u8 (*channel_to_reg)(int channel); + int (*calibrate)(struct twl6030_gpadc_data *gpadc); +}; + +/** + * struct twl6030_gpadc_data - GPADC data + * @dev: device pointer + * @lock: mutual exclusion lock for the structure + * @irq_complete: completion to signal end of conversion + * @twl6030_cal_tbl: pointer to calibration data for each + * channel with gain error and offset + * @pdata: pointer to device specific data + */ +struct twl6030_gpadc_data { + struct device *dev; + struct mutex lock; + struct completion irq_complete; + struct twl6030_chnl_calib *twl6030_cal_tbl; + const struct twl6030_gpadc_platform_data *pdata; +}; + +/* + * channels 11, 12, 13, 15 and 16 have no calibration data + * calibration offset is same for channels 1, 3, 4, 5 + * + * The data is taken from GPADC_TRIM registers description. + * GPADC_TRIM registers keep difference between the code measured + * at volt1 and volt2 input voltages and corresponding code1 and code2 + */ +static const struct twl6030_ideal_code + twl6030_ideal[TWL6030_GPADC_USED_CHANNELS] = { + [0] = { /* ch 0, external, battery type, resistor value */ + .channel = 0, + .code1 = 116, + .code2 = 745, + .volt1 = 141, + .volt2 = 910, + }, + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ + .channel = 1, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [2] = { /* ch 2, external, audio accessory/general purpose */ + .channel = 2, + .code1 = 55, + .code2 = 818, + .volt1 = 101, + .volt2 = 1499, + }, + [3] = { /* ch 3, external, general purpose */ + .channel = 3, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [4] = { /* ch 4, external, temperature measurement/general purpose */ + .channel = 4, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [5] = { /* ch 5, external, general purpose */ + .channel = 5, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [6] = { /* ch 6, external, general purpose */ + .channel = 6, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [7] = { /* ch 7, internal, main battery */ + .channel = 7, + .code1 = 614, + .code2 = 941, + .volt1 = 3001, + .volt2 = 4599, + }, + [8] = { /* ch 8, internal, backup battery */ + .channel = 8, + .code1 = 82, + .code2 = 688, + .volt1 = 501, + .volt2 = 4203, + }, + [9] = { /* ch 9, internal, external charger input */ + .channel = 9, + .code1 = 182, + .code2 = 818, + .volt1 = 2001, + .volt2 = 8996, + }, + [10] = { /* ch 10, internal, VBUS */ + .channel = 10, + .code1 = 149, + .code2 = 818, + .volt1 = 1001, + .volt2 = 5497, + }, + [11] = { /* ch 11, internal, VBUS charging current */ + .channel = 11, + }, + /* ch 12, internal, Die temperature */ + /* ch 13, internal, Die temperature */ + [12] = { /* ch 14, internal, USB ID line */ + .channel = 14, + .code1 = 48, + .code2 = 714, + .volt1 = 323, + .volt2 = 4800, + }, +}; + +static const struct twl6030_ideal_code + twl6032_ideal[TWL6032_GPADC_USED_CHANNELS] = { + [0] = { /* ch 0, external, battery type, resistor value */ + .channel = 0, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ + .channel = 1, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [2] = { /* ch 2, external, audio accessory/general purpose */ + .channel = 2, + .code1 = 1441, + .code2 = 3276, + .volt1 = 660, + .volt2 = 1500, + }, + [3] = { /* ch 3, external, temperature with external diode/general + purpose */ + .channel = 3, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [4] = { /* ch 4, external, temperature measurement/general purpose */ + .channel = 4, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [5] = { /* ch 5, external, general purpose */ + .channel = 5, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [6] = { /* ch 6, external, general purpose */ + .channel = 6, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [7] = { /* ch7, internal, system supply */ + .channel = 7, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2200, + .volt2 = 5000, + }, + [8] = { /* ch8, internal, backup battery */ + .channel = 8, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2200, + .volt2 = 5000, + }, + [9] = { /* ch 9, internal, external charger input */ + .channel = 9, + .code1 = 1441, + .code2 = 3276, + .volt1 = 3960, + .volt2 = 9000, + }, + [10] = { /* ch10, internal, VBUS */ + .channel = 10, + .code1 = 150, + .code2 = 751, + .volt1 = 1000, + .volt2 = 5000, + }, + [11] = { /* ch 11, internal, VBUS DC-DC output current */ + .channel = 11, + .code1 = 1441, + .code2 = 3276, + .volt1 = 660, + .volt2 = 1500, + }, + /* ch 12, internal, Die temperature */ + /* ch 13, internal, Die temperature */ + [12] = { /* ch 14, internal, USB ID line */ + .channel = 14, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2420, + .volt2 = 5500, + }, + /* ch 15, internal, test network */ + /* ch 16, internal, test network */ + [13] = { /* ch 17, internal, battery charging current */ + .channel = 17, + }, + [14] = { /* ch 18, internal, battery voltage */ + .channel = 18, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2200, + .volt2 = 5000, + }, +}; + +static inline int twl6030_gpadc_write(u8 reg, u8 val) +{ + return twl_i2c_write_u8(TWL6030_MODULE_GPADC, val, reg); +} + +static inline int twl6030_gpadc_read(u8 reg, u8 *val) +{ + + return twl_i2c_read(TWL6030_MODULE_GPADC, val, reg, 2); +} + +static int twl6030_gpadc_enable_irq(u8 mask) +{ + int ret; + + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_LINE_B); + if (ret < 0) + return ret; + + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_STS_B); + + return ret; +} + +static void twl6030_gpadc_disable_irq(u8 mask) +{ + twl6030_interrupt_mask(mask, REG_INT_MSK_LINE_B); + twl6030_interrupt_mask(mask, REG_INT_MSK_STS_B); +} + +static irqreturn_t twl6030_gpadc_irq_handler(int irq, void *indio_dev) +{ + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); + + complete(&gpadc->irq_complete); + + return IRQ_HANDLED; +} + +static int twl6030_start_conversion(int channel) +{ + return twl6030_gpadc_write(TWL6030_GPADC_CTRL_P1, + TWL6030_GPADC_CTRL_P1_SP1); +} + +static int twl6032_start_conversion(int channel) +{ + int ret; + + ret = twl6030_gpadc_write(TWL6032_GPADC_GPSELECT_ISB, channel); + if (ret) + return ret; + + return twl6030_gpadc_write(TWL6032_GPADC_CTRL_P1, + TWL6030_GPADC_CTRL_P1_SP1); +} + +static u8 twl6030_channel_to_reg(int channel) +{ + return TWL6030_GPADC_GPCH0_LSB + 2 * channel; +} + +static u8 twl6032_channel_to_reg(int channel) +{ + /* + * for any prior chosen channel, when the conversion is ready + * the result is avalable in GPCH0_LSB, GPCH0_MSB. + */ + + return TWL6032_GPADC_GPCH0_LSB; +} + +static int twl6030_gpadc_lookup(const struct twl6030_ideal_code *ideal, + int channel, int size) +{ + int i; + + for (i = 0; i < size; i++) + if (ideal[i].channel == channel) + break; + + return i; +} + +static int twl6030_channel_calibrated(const struct twl6030_gpadc_platform_data + *pdata, int channel) +{ + const struct twl6030_ideal_code *ideal = pdata->ideal; + int i; + + i = twl6030_gpadc_lookup(ideal, channel, pdata->nchannels); + /* not calibrated channels have 0 in all structure members */ + return pdata->ideal[i].code2; +} + +static int twl6030_gpadc_make_correction(struct twl6030_gpadc_data *gpadc, + int channel, int raw_code) +{ + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; + int corrected_code; + int i; + + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); + corrected_code = ((raw_code * 1000) - + gpadc->twl6030_cal_tbl[i].offset_error) / + gpadc->twl6030_cal_tbl[i].gain_error; + + return corrected_code; +} + +static int twl6030_gpadc_get_raw(struct twl6030_gpadc_data *gpadc, + int channel, int *res) +{ + u8 reg = gpadc->pdata->channel_to_reg(channel); + __le16 val; + int raw_code; + int ret; + + ret = twl6030_gpadc_read(reg, (u8 *)&val); + if (ret) { + dev_dbg(gpadc->dev, "unable to read register 0x%X\n", reg); + return ret; + } + + raw_code = le16_to_cpu(val); + dev_dbg(gpadc->dev, "GPADC raw code: %d", raw_code); + + if (twl6030_channel_calibrated(gpadc->pdata, channel)) + *res = twl6030_gpadc_make_correction(gpadc, channel, raw_code); + else + *res = raw_code; + + return ret; +} + +static int twl6030_gpadc_get_processed(struct twl6030_gpadc_data *gpadc, + int channel, int *val) +{ + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; + int corrected_code; + int channel_value; + int i; + int ret; + + ret = twl6030_gpadc_get_raw(gpadc, channel, &corrected_code); + if (ret) + return ret; + + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); + channel_value = corrected_code * + gpadc->twl6030_cal_tbl[i].gain; + + /* Shift back into mV range */ + channel_value /= 1000; + + dev_dbg(gpadc->dev, "GPADC corrected code: %d", corrected_code); + dev_dbg(gpadc->dev, "GPADC value: %d", channel_value); + + *val = channel_value; + + return ret; +} + +static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); + int ret; + long timeout; + + mutex_lock(&gpadc->lock); + + ret = gpadc->pdata->start_conversion(chan->channel); + if (ret) { + dev_err(gpadc->dev, "failed to start conversion\n"); + goto err; + } + /* wait for conversion to complete */ + timeout = wait_for_completion_interruptible_timeout( + &gpadc->irq_complete, msecs_to_jiffies(5000)); + if (timeout == 0) { + ret = -ETIMEDOUT; + goto err; + } else if (timeout < 0) { + goto err; + ret = -EINTR; + } + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = twl6030_gpadc_get_raw(gpadc, chan->channel, val); + ret = ret ? -EIO : IIO_VAL_INT; + break; + + case IIO_CHAN_INFO_PROCESSED: + ret = twl6030_gpadc_get_processed(gpadc, chan->channel, val); + ret = ret ? -EIO : IIO_VAL_INT; + break; + + default: + break; + } +err: + mutex_unlock(&gpadc->lock); + + return ret; +} + +/* + * The GPADC channels are calibrated using a two point calibration method. + * The channels measured with two known values: volt1 and volt2, and + * ideal corresponding output codes are known: code1, code2. + * The difference(d1, d2) between ideal and measured codes stored in trim + * registers. + * The goal is to find offset and gain of the real curve for each calibrated + * channel. + * gain: k = 1 + ((d2 - d1) / (x2 - x1)) + * offset: b = d1 + (k - 1) * x1 + */ +static void twl6030_calibrate_channel(struct twl6030_gpadc_data *gpadc, + int channel, int d1, int d2) +{ + int b, k, gain, x1, x2, i; + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; + + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); + + /* Gain */ + gain = ((ideal[i].volt2 - ideal[i].volt1) * 1000) / + (ideal[i].code2 - ideal[i].code1); + + x1 = ideal[i].code1; + x2 = ideal[i].code2; + + /* k - real curve gain */ + k = 1000 + (((d2 - d1) * 1000) / (x2 - x1)); + + /* b - offset of the real curve gain */ + b = (d1 * 1000) - (k - 1000) * x1; + + gpadc->twl6030_cal_tbl[i].gain = gain; + gpadc->twl6030_cal_tbl[i].gain_error = k; + gpadc->twl6030_cal_tbl[i].offset_error = b; + + dev_dbg(gpadc->dev, "GPADC d1 for Chn: %d = %d\n", channel, d1); + dev_dbg(gpadc->dev, "GPADC d2 for Chn: %d = %d\n", channel, d2); + dev_dbg(gpadc->dev, "GPADC x1 for Chn: %d = %d\n", channel, x1); + dev_dbg(gpadc->dev, "GPADC x2 for Chn: %d = %d\n", channel, x2); + dev_dbg(gpadc->dev, "GPADC Gain for Chn: %d = %d\n", channel, gain); + dev_dbg(gpadc->dev, "GPADC k for Chn: %d = %d\n", channel, k); + dev_dbg(gpadc->dev, "GPADC b for Chn: %d = %d\n", channel, b); +} + +static inline int twl6030_gpadc_get_trim_offset(s8 d) +{ + /* + * XXX NOTE! + * bit 0 - sign, bit 7 - reserved, 6..1 - trim value + * though, the documentation states that trim value + * is absolute value, the correct conversion results are + * obtained if the value is interpreted as 2's complement. + */ + __u32 temp = ((d & 0x7f) >> 1) | ((d & 1) << 6); + + return sign_extend32(temp, 6); +} + +static int twl6030_calibration(struct twl6030_gpadc_data *gpadc) +{ + int ret; + int chn; + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; + s8 d1, d2; + + /* + * for calibration two measurements have been performed at + * factory, for some channels, during the production test and + * have been stored in registers. This two stored values are + * used to correct the measurements. The values represent + * offsets for the given input from the output on ideal curve. + */ + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); + if (ret < 0) { + dev_err(gpadc->dev, "calibration failed\n"); + return ret; + } + + for (chn = 0; chn < TWL6030_GPADC_MAX_CHANNELS; chn++) { + + switch (chn) { + case 0: + d1 = trim_regs[0]; + d2 = trim_regs[1]; + break; + case 1: + case 3: + case 4: + case 5: + case 6: + d1 = trim_regs[4]; + d2 = trim_regs[5]; + break; + case 2: + d1 = trim_regs[12]; + d2 = trim_regs[13]; + break; + case 7: + d1 = trim_regs[6]; + d2 = trim_regs[7]; + break; + case 8: + d1 = trim_regs[2]; + d2 = trim_regs[3]; + break; + case 9: + d1 = trim_regs[8]; + d2 = trim_regs[9]; + break; + case 10: + d1 = trim_regs[10]; + d2 = trim_regs[11]; + break; + case 14: + d1 = trim_regs[14]; + d2 = trim_regs[15]; + break; + default: + continue; + } + + d1 = twl6030_gpadc_get_trim_offset(d1); + d2 = twl6030_gpadc_get_trim_offset(d2); + + twl6030_calibrate_channel(gpadc, chn, d1, d2); + } + + return 0; +} + +static int twl6032_get_trim_value(u8 *trim_regs, unsigned int reg0, + unsigned int reg1, unsigned int mask0, unsigned int mask1, + unsigned int shift0) +{ + int val; + + val = (trim_regs[reg0] & mask0) << shift0; + val |= (trim_regs[reg1] & mask1) >> 1; + if (trim_regs[reg1] & 0x01) + val = -val; + + return val; +} + +static int twl6032_calibration(struct twl6030_gpadc_data *gpadc) +{ + int chn, d1 = 0, d2 = 0, temp; + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; + int ret; + + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); + if (ret < 0) { + dev_err(gpadc->dev, "calibration failed\n"); + return ret; + } + + /* + * Loop to calculate the value needed for returning voltages from + * GPADC not values. + * + * gain is calculated to 3 decimal places fixed point. + */ + for (chn = 0; chn < TWL6032_GPADC_MAX_CHANNELS; chn++) { + + switch (chn) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 11: + case 14: + d1 = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + d2 = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, + 0x06, 2); + break; + case 8: + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + d1 = temp + twl6032_get_trim_value(trim_regs, 7, 6, + 0x18, 0x1E, 1); + + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3F, + 0x06, 2); + d2 = temp + twl6032_get_trim_value(trim_regs, 9, 7, + 0x1F, 0x06, 2); + break; + case 9: + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + d1 = temp + twl6032_get_trim_value(trim_regs, 13, 11, + 0x18, 0x1E, 1); + + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, + 0x06, 2); + d2 = temp + twl6032_get_trim_value(trim_regs, 15, 13, + 0x1F, 0x06, 1); + break; + case 10: + d1 = twl6032_get_trim_value(trim_regs, 10, 8, 0x0f, + 0x0E, 3); + d2 = twl6032_get_trim_value(trim_regs, 14, 12, 0x0f, + 0x0E, 3); + break; + case 7: + case 18: + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + + d1 = (trim_regs[4] & 0x7E) >> 1; + if (trim_regs[4] & 0x01) + d1 = -d1; + d1 += temp; + + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, + 0x06, 2); + + d2 = (trim_regs[5] & 0xFE) >> 1; + if (trim_regs[5] & 0x01) + d2 = -d2; + + d2 += temp; + break; + default: + /* No data for other channels */ + continue; + } + + twl6030_calibrate_channel(gpadc, chn, d1, d2); + } + + return 0; +} + +#define TWL6030_GPADC_CHAN(chn, _type, chan_info) { \ + .type = _type, \ + .channel = chn, \ + .info_mask_separate = BIT(chan_info), \ + .indexed = 1, \ +} + +static const struct iio_chan_spec twl6030_gpadc_iio_channels[] = { + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), +}; + +static const struct iio_chan_spec twl6032_gpadc_iio_channels[] = { + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(17, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(18, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), +}; + +static const struct iio_info twl6030_gpadc_iio_info = { + .read_raw = &twl6030_gpadc_read_raw, + .driver_module = THIS_MODULE, +}; + +static const struct twl6030_gpadc_platform_data twl6030_pdata = { + .iio_channels = twl6030_gpadc_iio_channels, + .nchannels = TWL6030_GPADC_USED_CHANNELS, + .ideal = twl6030_ideal, + .start_conversion = twl6030_start_conversion, + .channel_to_reg = twl6030_channel_to_reg, + .calibrate = twl6030_calibration, +}; + +static const struct twl6030_gpadc_platform_data twl6032_pdata = { + .iio_channels = twl6032_gpadc_iio_channels, + .nchannels = TWL6032_GPADC_USED_CHANNELS, + .ideal = twl6032_ideal, + .start_conversion = twl6032_start_conversion, + .channel_to_reg = twl6032_channel_to_reg, + .calibrate = twl6032_calibration, +}; + +static const struct of_device_id of_twl6030_match_tbl[] = { + { + .compatible = "ti,twl6030-gpadc", + .data = &twl6030_pdata, + }, + { + .compatible = "ti,twl6032-gpadc", + .data = &twl6032_pdata, + }, + { /* end */ } +}; + +static int twl6030_gpadc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct twl6030_gpadc_data *gpadc; + const struct twl6030_gpadc_platform_data *pdata; + const struct of_device_id *match; + struct iio_dev *indio_dev; + int irq; + int ret; + + match = of_match_device(of_match_ptr(of_twl6030_match_tbl), dev); + if (!match) + return -EINVAL; + + pdata = match->data; + + indio_dev = iio_device_alloc(sizeof(*gpadc)); + if (!indio_dev) { + dev_err(dev, "failed allocating iio device\n"); + ret = -ENOMEM; + } + + gpadc = iio_priv(indio_dev); + + gpadc->twl6030_cal_tbl = devm_kzalloc(dev, + sizeof(*gpadc->twl6030_cal_tbl) * + pdata->nchannels, GFP_KERNEL); + if (!gpadc->twl6030_cal_tbl) + goto err_free_device; + + gpadc->dev = dev; + gpadc->pdata = pdata; + + platform_set_drvdata(pdev, indio_dev); + mutex_init(&gpadc->lock); + init_completion(&gpadc->irq_complete); + + ret = pdata->calibrate(gpadc); + if (ret < 0) { + dev_err(&pdev->dev, "failed to read calibration registers\n"); + goto err_free_device; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get irq\n"); + goto err_free_device; + } + + ret = request_threaded_irq(irq, NULL, twl6030_gpadc_irq_handler, + IRQF_ONESHOT, "twl6030_gpadc", indio_dev); + if (ret) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto err_free_device; + } + + ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable GPADC interrupt\n"); + goto err_free_irq; + } + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, + TWL6030_REG_TOGGLE1); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable GPADC module\n"); + goto err_free_irq; + } + + indio_dev->name = DRIVER_NAME; + indio_dev->dev.parent = dev; + indio_dev->info = &twl6030_gpadc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = pdata->iio_channels; + indio_dev->num_channels = pdata->nchannels; + + ret = iio_device_register(indio_dev); + if (ret) + goto err_free_irq; + + return ret; + +err_free_irq: + free_irq(irq, indio_dev); +err_free_device: + iio_device_free(indio_dev); + + return ret; +} + +static int twl6030_gpadc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); + free_irq(platform_get_irq(pdev, 0), indio_dev); + iio_device_unregister(indio_dev); + iio_device_free(indio_dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int twl6030_gpadc_suspend(struct device *pdev) +{ + int ret; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR, + TWL6030_REG_TOGGLE1); + if (ret) + dev_err(pdev, "error reseting GPADC (%d)!\n", ret); + + return 0; +}; + +static int twl6030_gpadc_resume(struct device *pdev) +{ + int ret; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, + TWL6030_REG_TOGGLE1); + if (ret) + dev_err(pdev, "error setting GPADC (%d)!\n", ret); + + return 0; +}; +#endif + +static SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, + twl6030_gpadc_resume); + +static struct platform_driver twl6030_gpadc_driver = { + .probe = twl6030_gpadc_probe, + .remove = twl6030_gpadc_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &twl6030_gpadc_pm_ops, + .of_match_table = of_twl6030_match_tbl, + }, +}; + +module_platform_driver(twl6030_gpadc_driver); + +MODULE_ALIAS("platform: " DRIVER_NAME); +MODULE_AUTHOR("Balaji T K <balajitk@ti.com>, Graeme Gregory <gg@slimlogic.co.uk>, Oleksandr Kozaruk <oleksandr.kozaruk@ti.com"); +MODULE_DESCRIPTION("twl6030 ADC driver"); +MODULE_LICENSE("GPL");