| Message ID | 1376635535-10325-1-git-send-email-gwenhael.goavec-merou@armadeus.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Aug 16, 2013 at 08:45:35AM +0200, Gwenhael Goavec-Merou wrote: > CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Sascha, Does it look right to you? Shawn > --- > arch/arm/boot/dts/imx27.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi > index 0695264..f71d233 100644 > --- a/arch/arm/boot/dts/imx27.dtsi > +++ b/arch/arm/boot/dts/imx27.dtsi > @@ -152,7 +152,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000e000 0x1000>; > interrupts = <16>; > - clocks = <&clks 53>, <&clks 53>; > + clocks = <&clks 53>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -163,7 +163,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000f000 0x1000>; > interrupts = <15>; > - clocks = <&clks 52>, <&clks 52>; > + clocks = <&clks 52>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -266,7 +266,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x10017000 0x1000>; > interrupts = <6>; > - clocks = <&clks 51>, <&clks 51>; > + clocks = <&clks 51>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > -- > 1.8.1.5 >
Correct Sascha's address. On Fri, Aug 16, 2013 at 08:45:35AM +0200, Gwenhael Goavec-Merou wrote: > CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> > --- > arch/arm/boot/dts/imx27.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi > index 0695264..f71d233 100644 > --- a/arch/arm/boot/dts/imx27.dtsi > +++ b/arch/arm/boot/dts/imx27.dtsi > @@ -152,7 +152,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000e000 0x1000>; > interrupts = <16>; > - clocks = <&clks 53>, <&clks 53>; > + clocks = <&clks 53>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -163,7 +163,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000f000 0x1000>; > interrupts = <15>; > - clocks = <&clks 52>, <&clks 52>; > + clocks = <&clks 52>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -266,7 +266,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x10017000 0x1000>; > interrupts = <6>; > - clocks = <&clks 51>, <&clks 51>; > + clocks = <&clks 51>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > -- > 1.8.1.5 >
On Fri, Aug 16, 2013 at 08:45:35AM +0200, Gwenhael Goavec-Merou wrote: > CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha > --- > arch/arm/boot/dts/imx27.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi > index 0695264..f71d233 100644 > --- a/arch/arm/boot/dts/imx27.dtsi > +++ b/arch/arm/boot/dts/imx27.dtsi > @@ -152,7 +152,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000e000 0x1000>; > interrupts = <16>; > - clocks = <&clks 53>, <&clks 53>; > + clocks = <&clks 53>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -163,7 +163,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000f000 0x1000>; > interrupts = <15>; > - clocks = <&clks 52>, <&clks 52>; > + clocks = <&clks 52>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -266,7 +266,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x10017000 0x1000>; > interrupts = <6>; > - clocks = <&clks 51>, <&clks 51>; > + clocks = <&clks 51>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > -- > 1.8.1.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
ping? Gwen On Fri, 16 Aug 2013 08:45:35 +0200 Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> wrote: > CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. > > Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> > --- > arch/arm/boot/dts/imx27.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi > index 0695264..f71d233 100644 > --- a/arch/arm/boot/dts/imx27.dtsi > +++ b/arch/arm/boot/dts/imx27.dtsi > @@ -152,7 +152,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000e000 0x1000>; > interrupts = <16>; > - clocks = <&clks 53>, <&clks 53>; > + clocks = <&clks 53>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -163,7 +163,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x1000f000 0x1000>; > interrupts = <15>; > - clocks = <&clks 52>, <&clks 52>; > + clocks = <&clks 52>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > @@ -266,7 +266,7 @@ > compatible = "fsl,imx27-cspi"; > reg = <0x10017000 0x1000>; > interrupts = <6>; > - clocks = <&clks 51>, <&clks 51>; > + clocks = <&clks 51>, <&clks 60>; > clock-names = "ipg", "per"; > status = "disabled"; > }; > -- > 1.8.1.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
On Tue, Aug 27, 2013 at 06:41:24PM +0200, gwenhael.goavec wrote: > ping? > Applied. Sorry for the delay. Shawn
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 0695264..f71d233 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -152,7 +152,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 53>; + clocks = <&clks 53>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -163,7 +163,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 52>; + clocks = <&clks 52>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -266,7 +266,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 51>; + clocks = <&clks 51>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; };
CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> --- arch/arm/boot/dts/imx27.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)