@@ -7,7 +7,6 @@ Required properties:
- interrupts: Should contain the IRQ line for the ADC
- atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
device
- - atmel,adc-num-channels: Number of channels available in the ADC
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
defined in the datasheet
- atmel,adc-vref: Reference voltage in millivolts for the conversions
@@ -43,6 +43,7 @@ struct at91_adc_caps {
/* startup time calculate function */
u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
+ u8 num_channels;
struct at91_adc_reg_desc registers;
};
@@ -502,13 +503,6 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
}
st->channels_mask = prop;
- if (of_property_read_u32(node, "atmel,adc-num-channels", &prop)) {
- dev_err(&idev->dev, "Missing adc-num-channels property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->num_channels = prop;
-
st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
@@ -534,6 +528,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
goto error_ret;
st->registers = &st->caps->registers;
+ st->num_channels = st->caps->num_channels;
st->trigger_number = of_get_child_count(node);
st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
sizeof(struct at91_adc_trigger),
@@ -788,6 +783,7 @@ static int at91_adc_remove(struct platform_device *pdev)
#ifdef CONFIG_OF
static struct at91_adc_caps at91sam9260_caps = {
.calc_startup_ticks = calc_startup_ticks_9260,
+ .num_channels = 4,
.registers = {
.channel_base = AT91_ADC_CHR(0),
.drdy_mask = AT91_ADC_DRDY,
@@ -800,6 +796,7 @@ static struct at91_adc_caps at91sam9260_caps = {
static struct at91_adc_caps at91sam9g45_caps = {
.calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
+ .num_channels = 8,
.registers = {
.channel_base = AT91_ADC_CHR(0),
.drdy_mask = AT91_ADC_DRDY,
@@ -812,6 +809,7 @@ static struct at91_adc_caps at91sam9g45_caps = {
static struct at91_adc_caps at91sam9x5_caps = {
.calc_startup_ticks = calc_startup_ticks_9x5,
+ .num_channels = 12,
.registers = {
.channel_base = AT91_ADC_CDR0_9X5,
.drdy_mask = AT91_ADC_SR_DRDY_9X5,
CC: devicetree@vger.kernel.org Signed-off-by: Josh Wu <josh.wu@atmel.com> --- Sorry for not testing the previous email for this patch. Now I find the compiling error in the patch, so I resend a fix version of this patch. In this resended version: - fix the compile error the typo. - fix the num_channels assignment type error. Documentation/devicetree/bindings/arm/atmel-adc.txt | 1 - drivers/iio/adc/at91_adc.c | 12 +++++------- 2 files changed, 5 insertions(+), 8 deletions(-)