diff mbox

[2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support

Message ID 1377525218-7655-3-git-send-email-balajitk@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Balaji T K Aug. 26, 2013, 1:53 p.m. UTC
Add mmc2 dt node to dra7-evm board
and model eMMC vcc as fixed regulator.

Signed-off-by: Balaji T K <balajitk@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

Comments

Benoit Cousson Sept. 24, 2013, 9:41 a.m. UTC | #1
+ Sekhar

Hi Balaji,

On 26/08/2013 15:53, Balaji T K wrote:
> Add mmc2 dt node to dra7-evm board
> and model eMMC vcc as fixed regulator.
>
> Signed-off-by: Balaji T K <balajitk@ti.com>
> ---
>   arch/arm/boot/dts/dra7-evm.dts |   14 ++++++++++++++
>   1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index a59bbd0..2062724 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -17,6 +17,13 @@
>   		device_type = "memory";
>   		reg = <0x80000000 0x60000000>; /* 1536 MB */
>   	};
> +
> +	mmc2_3v3: fixedregulator-mmc2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "mmc2_3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
>   };
>
>   &dra7_pmx_core {
> @@ -257,3 +264,10 @@
>   	vmmc-supply = <&ldo1_reg>;
>   	bus-width = <4>;
>   };
> +
> +&mmc2 {
> +	status = "okay";
> +	vmmc-supply = <&mmc2_3v3>;
> +	bus-width = <8>;
> +	ti,non-removable;

Sekhar just posted a series to replace that with a non-TI attribute: 
non-removable.

I'm not sure if this got merged, but it might be good to use the 
standard attribute instead.

Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Balaji T K Sept. 25, 2013, 4:17 p.m. UTC | #2
On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote:
> + Sekhar
>
> Hi Balaji,
>
> On 26/08/2013 15:53, Balaji T K wrote:
>> Add mmc2 dt node to dra7-evm board
>> and model eMMC vcc as fixed regulator.
>>
>> Signed-off-by: Balaji T K <balajitk@ti.com>
>> ---
>>   arch/arm/boot/dts/dra7-evm.dts |   14 ++++++++++++++
>>   1 files changed, 14 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
>> index a59bbd0..2062724 100644
>> --- a/arch/arm/boot/dts/dra7-evm.dts
>> +++ b/arch/arm/boot/dts/dra7-evm.dts
>> @@ -17,6 +17,13 @@
>>           device_type = "memory";
>>           reg = <0x80000000 0x60000000>; /* 1536 MB */
>>       };
>> +
>> +    mmc2_3v3: fixedregulator-mmc2 {
>> +        compatible = "regulator-fixed";
>> +        regulator-name = "mmc2_3v3";
>> +        regulator-min-microvolt = <3300000>;
>> +        regulator-max-microvolt = <3300000>;
>> +    };
>>   };
>>
>>   &dra7_pmx_core {
>> @@ -257,3 +264,10 @@
>>       vmmc-supply = <&ldo1_reg>;
>>       bus-width = <4>;
>>   };
>> +
>> +&mmc2 {
>> +    status = "okay";
>> +    vmmc-supply = <&mmc2_3v3>;
>> +    bus-width = <8>;
>> +    ti,non-removable;
>
> Sekhar just posted a series to replace that with a non-TI attribute: non-removable.
>
> I'm not sure if this got merged, but it might be good to use the standard attribute instead.

Hi Benoit,

Those patches are not merged yet, standard attribute is good, but few cleanups are needed
before ti,non-removable can be replaced by standard non-removable,
no_regulator_off_init flag set under ti,non-removable is needed to detect eMMC
during boot on OMAP4 devices to keep regulator ON during init. Given that eMMC on dra7-evm
is powered by always ON regulator, ti,non-removable and standard attribute will behave same
way. Let me know if you want to remove ti,non-removable attribute from this patch.

>
> Regards,
> Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sekhar Nori Sept. 27, 2013, 7:58 a.m. UTC | #3
On 9/25/2013 9:47 PM, Balaji T K wrote:
> On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote:
>> + Sekhar
>>
>> Hi Balaji,
>>
>> On 26/08/2013 15:53, Balaji T K wrote:
>>> Add mmc2 dt node to dra7-evm board
>>> and model eMMC vcc as fixed regulator.
>>>
>>> Signed-off-by: Balaji T K <balajitk@ti.com>
>>> ---
>>>   arch/arm/boot/dts/dra7-evm.dts |   14 ++++++++++++++
>>>   1 files changed, 14 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/dra7-evm.dts
>>> b/arch/arm/boot/dts/dra7-evm.dts
>>> index a59bbd0..2062724 100644
>>> --- a/arch/arm/boot/dts/dra7-evm.dts
>>> +++ b/arch/arm/boot/dts/dra7-evm.dts
>>> @@ -17,6 +17,13 @@
>>>           device_type = "memory";
>>>           reg = <0x80000000 0x60000000>; /* 1536 MB */
>>>       };
>>> +
>>> +    mmc2_3v3: fixedregulator-mmc2 {
>>> +        compatible = "regulator-fixed";
>>> +        regulator-name = "mmc2_3v3";
>>> +        regulator-min-microvolt = <3300000>;
>>> +        regulator-max-microvolt = <3300000>;
>>> +    };
>>>   };
>>>
>>>   &dra7_pmx_core {
>>> @@ -257,3 +264,10 @@
>>>       vmmc-supply = <&ldo1_reg>;
>>>       bus-width = <4>;
>>>   };
>>> +
>>> +&mmc2 {
>>> +    status = "okay";
>>> +    vmmc-supply = <&mmc2_3v3>;
>>> +    bus-width = <8>;
>>> +    ti,non-removable;
>>
>> Sekhar just posted a series to replace that with a non-TI attribute:
>> non-removable.
>>
>> I'm not sure if this got merged, but it might be good to use the
>> standard attribute instead.
> 
> Hi Benoit,
> 
> Those patches are not merged yet, standard attribute is good, but few
> cleanups are needed
> before ti,non-removable can be replaced by standard non-removable,
> no_regulator_off_init flag set under ti,non-removable is needed to
> detect eMMC
> during boot on OMAP4 devices to keep regulator ON during init. Given
> that eMMC on dra7-evm
> is powered by always ON regulator, ti,non-removable and standard
> attribute will behave same
> way. Let me know if you want to remove ti,non-removable attribute from
> this patch.

I dont think its an issue if ti,non-removable and non-removable behave
exactly the same. In fact, it will be confusing if they behave differently.

I understand there is a need to clean-up the code around
no_regulator_off_init, but I am hoping that can be kept separate from
moving to a generic binding. The two clean-ups can be done independent
of each other.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index a59bbd0..2062724 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -17,6 +17,13 @@ 
 		device_type = "memory";
 		reg = <0x80000000 0x60000000>; /* 1536 MB */
 	};
+
+	mmc2_3v3: fixedregulator-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -257,3 +264,10 @@ 
 	vmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
 };
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&mmc2_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+};