diff mbox

[v2,3/9] ARM: dts: Add SHAM data and documentation for AM33XX

Message ID 1380553986-15910-4-git-send-email-joelf@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Joel Fernandes Sept. 30, 2013, 3:13 p.m. UTC
From: "Mark A. Greer" <mgreer@animalcreek.com>

Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms.  Also add Documentation file describing the data
for the SHAM module.

[joelf@ti.com: Dropped interrupt-parrent property]
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
---
 .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
 arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
 arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
 arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
 arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
 5 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt

Comments

Mark Rutland Oct. 4, 2013, 2:26 p.m. UTC | #1
On Mon, Sep 30, 2013 at 04:13:00PM +0100, Joel Fernandes wrote:
> From: "Mark A. Greer" <mgreer@animalcreek.com>
> 
> Add the generic AM33XX SHAM module's device tree data and
> enable it for the am335x-evm, am335x-evmsk, and am335x-bone
> platforms.  Also add Documentation file describing the data
> for the SHAM module.
> 
> [joelf@ti.com: Dropped interrupt-parrent property]
> CC: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
> ---
>  .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
>  arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
>  arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
>  arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
>  arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
>  5 files changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
> 
> diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
> new file mode 100644
> index 0000000..b97710f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
> @@ -0,0 +1,31 @@
> +OMAP SoC SHA crypto Module
> +
> +Required properties:
> +
> +- compatible : Should contain entries for this and backward compatible
> +  SHAM versions:
> +  - "ti,omap2-sham" for OMAP2 & OMAP3.
> +  - "ti,omap4-sham" for OMAP4 and AM33XX.
> +  Note that these two versions are incompatible.
> +- ti,hwmods: Name of the hwmod associated with the SHAM module
> +- reg : Offset and length of the register set for the module
> +- interrupt-parent : the phandle for the interrupt controller that
> +  services interrupts for this module.

I don't think this is strictly speaking necessary -- it's mostly going
to be implicit (it is in the dtsi below). As this is a standard
property, you don't need to document it here.

> +- interrupts : the interrupt number for the SHAM module.

Sorry, I missed this last time, but this should be interrupt-specifier
rather than interrupt number.

Otherwise, this looks good to me. With the fixups above:

Acked-by: Mark Rutland <mark.rutland@arm.com>

> +
> +Optional properties:
> +- dmas: DMA specifier for the rx dma. See the DMA client binding,
> +	Documentation/devicetree/bindings/dma/dma.txt
> +- dma-names: DMA request name. Should be "rx" if a dma is present.
> +
> +Example:
> +	/* AM335x */
> +	sham: sham@53100000 {
> +		compatible = "ti,omap4-sham";
> +		ti,hwmods = "sham";
> +		reg = <0x53100000 0x200>;
> +		interrupt-parent = <&intc>;
> +		interrupts = <109>;
> +		dmas = <&edma 36>;
> +		dma-names = "rx";
> +	};
> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> index 0d63348..8a9802e 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -19,3 +19,7 @@
>  &mmc1 {
>  	vmmc-supply = <&ldo3_reg>;
>  };
> +
> +&sham {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 23b0a3e..d59e51c 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -522,3 +522,7 @@
>  	status = "okay";
>  	vmmc-supply = <&vmmc_reg>;
>  };
> +
> +&sham {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
> index bc93895..d45a330 100644
> --- a/arch/arm/boot/dts/am335x-evmsk.dts
> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
> @@ -424,3 +424,7 @@
>  	status = "okay";
>  	vmmc-supply = <&vmmc_reg>;
>  };
> +
> +&sham {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 553adc6..299710b 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -710,5 +710,14 @@
>  			#size-cells = <1>;
>  			status = "disabled";
>  		};
> +
> +		sham: sham@53100000 {
> +			compatible = "ti,omap4-sham";
> +			ti,hwmods = "sham";
> +			reg = <0x53100000 0x200>;
> +			interrupts = <109>;
> +			dmas = <&edma 36>;
> +			dma-names = "rx";
> +		};
>  	};
>  };
> -- 
> 1.8.1.2
> 
>
Joel Fernandes Oct. 5, 2013, 6:18 p.m. UTC | #2
On 10/04/2013 09:26 AM, Mark Rutland wrote:
> On Mon, Sep 30, 2013 at 04:13:00PM +0100, Joel Fernandes wrote:
>> From: "Mark A. Greer" <mgreer@animalcreek.com>
>>
>> Add the generic AM33XX SHAM module's device tree data and
>> enable it for the am335x-evm, am335x-evmsk, and am335x-bone
>> platforms.  Also add Documentation file describing the data
>> for the SHAM module.
>>
>> [joelf@ti.com: Dropped interrupt-parrent property]
>> CC: Paul Walmsley <paul@pwsan.com>
>> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
>> ---
>>  .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
>>  arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
>>  arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
>>  arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
>>  arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
>>  5 files changed, 52 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
>>
>> diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> new file mode 100644
>> index 0000000..b97710f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
>> @@ -0,0 +1,31 @@
>> +OMAP SoC SHA crypto Module
>> +
>> +Required properties:
>> +
>> +- compatible : Should contain entries for this and backward compatible
>> +  SHAM versions:
>> +  - "ti,omap2-sham" for OMAP2 & OMAP3.
>> +  - "ti,omap4-sham" for OMAP4 and AM33XX.
>> +  Note that these two versions are incompatible.
>> +- ti,hwmods: Name of the hwmod associated with the SHAM module
>> +- reg : Offset and length of the register set for the module
>> +- interrupt-parent : the phandle for the interrupt controller that
>> +  services interrupts for this module.
> 
> I don't think this is strictly speaking necessary -- it's mostly going
> to be implicit (it is in the dtsi below). As this is a standard
> property, you don't need to document it here.

Ok, dropping from documentation.

>> +- interrupts : the interrupt number for the SHAM module.
> 
> Sorry, I missed this last time, but this should be interrupt-specifier
> rather than interrupt number.

Ok, done.

> 
> Otherwise, this looks good to me. With the fixups above:
> 
> Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks!

-Joel

> 
>> +
>> +Optional properties:
>> +- dmas: DMA specifier for the rx dma. See the DMA client binding,
>> +	Documentation/devicetree/bindings/dma/dma.txt
>> +- dma-names: DMA request name. Should be "rx" if a dma is present.
>> +
>> +Example:
>> +	/* AM335x */
>> +	sham: sham@53100000 {
>> +		compatible = "ti,omap4-sham";
>> +		ti,hwmods = "sham";
>> +		reg = <0x53100000 0x200>;
>> +		interrupt-parent = <&intc>;
>> +		interrupts = <109>;
>> +		dmas = <&edma 36>;
>> +		dma-names = "rx";
>> +	};
>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>> index 0d63348..8a9802e 100644
>> --- a/arch/arm/boot/dts/am335x-bone.dts
>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>> @@ -19,3 +19,7 @@
>>  &mmc1 {
>>  	vmmc-supply = <&ldo3_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
>> index 23b0a3e..d59e51c 100644
>> --- a/arch/arm/boot/dts/am335x-evm.dts
>> +++ b/arch/arm/boot/dts/am335x-evm.dts
>> @@ -522,3 +522,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
>> index bc93895..d45a330 100644
>> --- a/arch/arm/boot/dts/am335x-evmsk.dts
>> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
>> @@ -424,3 +424,7 @@
>>  	status = "okay";
>>  	vmmc-supply = <&vmmc_reg>;
>>  };
>> +
>> +&sham {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 553adc6..299710b 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -710,5 +710,14 @@
>>  			#size-cells = <1>;
>>  			status = "disabled";
>>  		};
>> +
>> +		sham: sham@53100000 {
>> +			compatible = "ti,omap4-sham";
>> +			ti,hwmods = "sham";
>> +			reg = <0x53100000 0x200>;
>> +			interrupts = <109>;
>> +			dmas = <&edma 36>;
>> +			dma-names = "rx";
>> +		};
>>  	};
>>  };
>> -- 
>> 1.8.1.2
>>
>>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
new file mode 100644
index 0000000..b97710f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,31 @@ 
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SHAM versions:
+  - "ti,omap2-sham" for OMAP2 & OMAP3.
+  - "ti,omap4-sham" for OMAP4 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this module.
+- interrupts : the interrupt number for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifier for the rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+	/* AM335x */
+	sham: sham@53100000 {
+		compatible = "ti,omap4-sham";
+		ti,hwmods = "sham";
+		reg = <0x53100000 0x200>;
+		interrupt-parent = <&intc>;
+		interrupts = <109>;
+		dmas = <&edma 36>;
+		dma-names = "rx";
+	};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 0d63348..8a9802e 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,3 +19,7 @@ 
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 23b0a3e..d59e51c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -522,3 +522,7 @@ 
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 };
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index bc93895..d45a330 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -424,3 +424,7 @@ 
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 };
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 553adc6..299710b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -710,5 +710,14 @@ 
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap4-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x200>;
+			interrupts = <109>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+		};
 	};
 };