Message ID | 1241611418-19730-1-git-send-email-amit.kucheria@verdurent.com (mailing list archive) |
---|---|
State | Accepted, archived |
Commit | 944f94235969c15b3012aa4dc832ed3e2f08e4da |
Headers | show |
Bump.. This patch was acked by David Brownell earlier in the thread. Regards, Amit On Wed, May 06, 2009 at 03:03:38PM +0300, Amit Kucheria wrote: > Check for return values of i2c read/write operations and size of scripts being > uploaded to TWL4030 > > (Removed the unrelated string changes based on David Brownell's comment) > > Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> > --- > drivers/mfd/twl4030-power.c | 52 +++++++++++++++++++++++++++++++----------- > 1 files changed, 38 insertions(+), 14 deletions(-) > > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c > index 9dc493b..8f5d149 100644 > --- a/drivers/mfd/twl4030-power.c > +++ b/drivers/mfd/twl4030-power.c > @@ -257,36 +257,40 @@ static int __init config_warmreset_sequence(u8 address) > return err; > } > > -void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) > { > int rconfig_addr; > + int err; > u8 type; > > if (rconfig->resource > NUM_OF_RESOURCES) { > printk(KERN_ERR > "TWL4030 Resource %d does not exist\n", > rconfig->resource); > - return; > + return -EINVAL; > } > > rconfig_addr = res_config_addrs[rconfig->resource]; > > /* Set resource group */ > - > if (rconfig->devgroup >= 0) > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > rconfig->devgroup << 5, > rconfig_addr + DEVGROUP_OFFSET); > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to program devgroup"); > + return err; > + } > > /* Set resource types */ > - > - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, > - &type, > - rconfig_addr + TYPE_OFFSET) < 0) { > + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, > + rconfig_addr + TYPE_OFFSET); > + if (err < 0) { > printk(KERN_ERR > - "TWL4030 Resource %d type could not read\n", > - rconfig->resource); > - return; > + "TWL4030 Resource %d type could not be read\n", > + rconfig->resource); > + return err; > } > > if (rconfig->type >= 0) { > @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > type |= rconfig->type2 << 3; > } > > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > type, rconfig_addr + TYPE_OFFSET); > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to program resource type"); > + return err; > + } > + > + return 0; > > } > > @@ -309,6 +320,12 @@ static int __init load_triton_script(struct twl4030_script *tscript) > u8 address = triton_next_free_address; > int err; > > + /* Make sure the script isn't going beyond last valid address */ > + if ((address + tscript->size) > (END_OF_SCRIPT-1)) { > + printk(KERN_ERR "TWL4030 script too big error\n"); > + return -EINVAL; > + } > + > err = twl4030_write_script(address, tscript->script, tscript->size); > if (err) > return err; > @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts) > > for (i = 0; i < triton2_scripts->size; i++) { > err = load_triton_script(triton2_scripts->scripts[i]); > - if (err) > + if (err < 0) { > + printk(KERN_ERR "TWL4030 failed to load scripts"); > break; > + } > } > > resconfig = triton2_scripts->resource_config; > if (resconfig) { > while (resconfig->resource) { > - twl4030_configure_resource(resconfig); > + err = twl4030_configure_resource(resconfig); > resconfig++; > + if (err < 0) { > + printk(KERN_ERR > + "TWL4030 failed to configure resource"); > + break; > + } > } > } > > -- > 1.6.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
* Amit Kucheria <amit.kucheria@verdurent.com> [090603 01:51]: > Bump.. > > This patch was acked by David Brownell earlier in the thread. OK, I add it, but will reset all the twl stuff to mainline after 2.6.30. These patches need to get submitted to mainline, all the other twl code is there already. Tony > Regards, > Amit > > On Wed, May 06, 2009 at 03:03:38PM +0300, Amit Kucheria wrote: > > Check for return values of i2c read/write operations and size of scripts being > > uploaded to TWL4030 > > > > (Removed the unrelated string changes based on David Brownell's comment) > > > > Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> > > --- > > drivers/mfd/twl4030-power.c | 52 +++++++++++++++++++++++++++++++----------- > > 1 files changed, 38 insertions(+), 14 deletions(-) > > > > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c > > index 9dc493b..8f5d149 100644 > > --- a/drivers/mfd/twl4030-power.c > > +++ b/drivers/mfd/twl4030-power.c > > @@ -257,36 +257,40 @@ static int __init config_warmreset_sequence(u8 address) > > return err; > > } > > > > -void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > > +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) > > { > > int rconfig_addr; > > + int err; > > u8 type; > > > > if (rconfig->resource > NUM_OF_RESOURCES) { > > printk(KERN_ERR > > "TWL4030 Resource %d does not exist\n", > > rconfig->resource); > > - return; > > + return -EINVAL; > > } > > > > rconfig_addr = res_config_addrs[rconfig->resource]; > > > > /* Set resource group */ > > - > > if (rconfig->devgroup >= 0) > > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > > rconfig->devgroup << 5, > > rconfig_addr + DEVGROUP_OFFSET); > > + if (err < 0) { > > + printk(KERN_ERR > > + "TWL4030 failed to program devgroup"); > > + return err; > > + } > > > > /* Set resource types */ > > - > > - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, > > - &type, > > - rconfig_addr + TYPE_OFFSET) < 0) { > > + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, > > + rconfig_addr + TYPE_OFFSET); > > + if (err < 0) { > > printk(KERN_ERR > > - "TWL4030 Resource %d type could not read\n", > > - rconfig->resource); > > - return; > > + "TWL4030 Resource %d type could not be read\n", > > + rconfig->resource); > > + return err; > > } > > > > if (rconfig->type >= 0) { > > @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct twl4030_resconfig *rconfig) > > type |= rconfig->type2 << 3; > > } > > > > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, > > type, rconfig_addr + TYPE_OFFSET); > > + if (err < 0) { > > + printk(KERN_ERR > > + "TWL4030 failed to program resource type"); > > + return err; > > + } > > + > > + return 0; > > > > } > > > > @@ -309,6 +320,12 @@ static int __init load_triton_script(struct twl4030_script *tscript) > > u8 address = triton_next_free_address; > > int err; > > > > + /* Make sure the script isn't going beyond last valid address */ > > + if ((address + tscript->size) > (END_OF_SCRIPT-1)) { > > + printk(KERN_ERR "TWL4030 script too big error\n"); > > + return -EINVAL; > > + } > > + > > err = twl4030_write_script(address, tscript->script, tscript->size); > > if (err) > > return err; > > @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts) > > > > for (i = 0; i < triton2_scripts->size; i++) { > > err = load_triton_script(triton2_scripts->scripts[i]); > > - if (err) > > + if (err < 0) { > > + printk(KERN_ERR "TWL4030 failed to load scripts"); > > break; > > + } > > } > > > > resconfig = triton2_scripts->resource_config; > > if (resconfig) { > > while (resconfig->resource) { > > - twl4030_configure_resource(resconfig); > > + err = twl4030_configure_resource(resconfig); > > resconfig++; > > + if (err < 0) { > > + printk(KERN_ERR > > + "TWL4030 failed to configure resource"); > > + break; > > + } > > } > > } > > > > -- > > 1.6.0.4 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > ------------------------------------------------------------------------- > Amit Kucheria, Kernel Developer, Verdurent > ------------------------------------------------------------------------- > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
This patch has been applied to the linux-omap by youw fwiendly patch wobot. Initial commit ID (Likely to change): 944f94235969c15b3012aa4dc832ed3e2f08e4da PatchWorks http://patchwork.kernel.org/patch/22012/ Git (Likely to change, and takes a while to get mirrored) http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=944f94235969c15b3012aa4dc832ed3e2f08e4da -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 9dc493b..8f5d149 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -257,36 +257,40 @@ static int __init config_warmreset_sequence(u8 address) return err; } -void twl4030_configure_resource(struct twl4030_resconfig *rconfig) +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) { int rconfig_addr; + int err; u8 type; if (rconfig->resource > NUM_OF_RESOURCES) { printk(KERN_ERR "TWL4030 Resource %d does not exist\n", rconfig->resource); - return; + return -EINVAL; } rconfig_addr = res_config_addrs[rconfig->resource]; /* Set resource group */ - if (rconfig->devgroup >= 0) - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, rconfig->devgroup << 5, rconfig_addr + DEVGROUP_OFFSET); + if (err < 0) { + printk(KERN_ERR + "TWL4030 failed to program devgroup"); + return err; + } /* Set resource types */ - - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, - &type, - rconfig_addr + TYPE_OFFSET) < 0) { + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + rconfig_addr + TYPE_OFFSET); + if (err < 0) { printk(KERN_ERR - "TWL4030 Resource %d type could not read\n", - rconfig->resource); - return; + "TWL4030 Resource %d type could not be read\n", + rconfig->resource); + return err; } if (rconfig->type >= 0) { @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct twl4030_resconfig *rconfig) type |= rconfig->type2 << 3; } - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, type, rconfig_addr + TYPE_OFFSET); + if (err < 0) { + printk(KERN_ERR + "TWL4030 failed to program resource type"); + return err; + } + + return 0; } @@ -309,6 +320,12 @@ static int __init load_triton_script(struct twl4030_script *tscript) u8 address = triton_next_free_address; int err; + /* Make sure the script isn't going beyond last valid address */ + if ((address + tscript->size) > (END_OF_SCRIPT-1)) { + printk(KERN_ERR "TWL4030 script too big error\n"); + return -EINVAL; + } + err = twl4030_write_script(address, tscript->script, tscript->size); if (err) return err; @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts) for (i = 0; i < triton2_scripts->size; i++) { err = load_triton_script(triton2_scripts->scripts[i]); - if (err) + if (err < 0) { + printk(KERN_ERR "TWL4030 failed to load scripts"); break; + } } resconfig = triton2_scripts->resource_config; if (resconfig) { while (resconfig->resource) { - twl4030_configure_resource(resconfig); + err = twl4030_configure_resource(resconfig); resconfig++; + if (err < 0) { + printk(KERN_ERR + "TWL4030 failed to configure resource"); + break; + } } }
Check for return values of i2c read/write operations and size of scripts being uploaded to TWL4030 (Removed the unrelated string changes based on David Brownell's comment) Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> --- drivers/mfd/twl4030-power.c | 52 +++++++++++++++++++++++++++++++----------- 1 files changed, 38 insertions(+), 14 deletions(-)