diff mbox

[v10,3/7] ARM: dts: enable hi4511 with device tree

Message ID 1381828577-27998-4-git-send-email-haojian.zhuang@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Haojian Zhuang Oct. 15, 2013, 9:16 a.m. UTC
Enable Hisilicon Hi4511 development platform with device tree support.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 arch/arm/boot/dts/Makefile        |    1 +
 arch/arm/boot/dts/hi3620-clk.dtsi | 1052 +++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/hi3620.dtsi     |  513 ++++++++++++++++++
 arch/arm/boot/dts/hi4511.dts      |  648 +++++++++++++++++++++++
 4 files changed, 2214 insertions(+)
 create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
 create mode 100644 arch/arm/boot/dts/hi3620.dtsi
 create mode 100644 arch/arm/boot/dts/hi4511.dts

Comments

Arnd Bergmann Oct. 15, 2013, 6:18 p.m. UTC | #1
On Tuesday 15 October 2013, Haojian Zhuang wrote:
> Enable Hisilicon Hi4511 development platform with device tree support.
> 
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Based on my other mail, some more comments here:

> +/ {
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;

Since all clocks are in the fc802000 page, I would prefer using a non-empty
ranges to map the clocks into their own address space, like

		ranges = <0 0xfc802000 0x1000>;


> +		timer4_mux: timer4_mux@fc802018 {
> +			compatible = "hisilicon,clk-mux";
> +			#clock-cells = <0>;
> +			clocks = <&osc32k &timerclk45>;
> +			clock-output-names = "timer4_mux";
> +			reg = <0xfc802018 0x4>;
> +			clkmux-mask = <0x3>;
> +			clkmux-table = <0 0x1>;
> +		};

which would turn this into 

		timer4_mux: timer4_mux@18 {
			...
			reg = <0x18 0x4>;
			...
		};

The code would not be impacted by this.

On a related note, I find it strange that you have multiple devices with the
same register. Normally, we try to have device node names be generic,
e.g. 'clock@18' rather than 'timer4_mux@18', but that won't work if the
register is the same for all of them. Maybe some DT expert can comment
on this.

> +
> +	amba {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "arm,amba-bus";
> +		interrupt-parent = <&gic>;
> +		ranges;
> +
> +		L2: l2-cache {
> +			compatible = "arm,pl310-cache";
> +			reg = <0xfc10000 0x100000>;
> +			interrupts = <0 15 4>;
> +			cache-unified;
> +			cache-level = <2>;
> +		};

For this node, we could use the same trick with the non-empty ranges, since
all amba devices seem to be in the 0xfc000000 range.

If you do that, it probably makes sense to move the clock controller under here
as well.

	Arnd
Haojian Zhuang Oct. 16, 2013, 2:09 a.m. UTC | #2
On 16 October 2013 02:18, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 15 October 2013, Haojian Zhuang wrote:
>> Enable Hisilicon Hi4511 development platform with device tree support.
>>
>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>
> Based on my other mail, some more comments here:
>
>> +/ {
>> +     clocks {
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges;
>
> Since all clocks are in the fc802000 page, I would prefer using a non-empty
> ranges to map the clocks into their own address space, like
>
>                 ranges = <0 0xfc802000 0x1000>;
>
>
OK.

>> +             timer4_mux: timer4_mux@fc802018 {
>> +                     compatible = "hisilicon,clk-mux";
>> +                     #clock-cells = <0>;
>> +                     clocks = <&osc32k &timerclk45>;
>> +                     clock-output-names = "timer4_mux";
>> +                     reg = <0xfc802018 0x4>;
>> +                     clkmux-mask = <0x3>;
>> +                     clkmux-table = <0 0x1>;
>> +             };
>
> which would turn this into
>
>                 timer4_mux: timer4_mux@18 {
>                         ...
>                         reg = <0x18 0x4>;
>                         ...
>                 };
>
> The code would not be impacted by this.
>
> On a related note, I find it strange that you have multiple devices with the
> same register. Normally, we try to have device node names be generic,
> e.g. 'clock@18' rather than 'timer4_mux@18', but that won't work if the
> register is the same for all of them. Maybe some DT expert can comment
> on this.
>
Because multiple clock nodes (clock mux/clock gate/clock divider) are
sharing the same register. I think that it's common on ARM SoC. At
least, I can find this in both Hisilicon & Marvell PXA/MMP SoC.

If I force to merge multiple clock nodes into the same device node,
it'll become mess. Different clock nodes have different properties.
The property won't work any more if they are merged into the same
device node.

>> +
>> +     amba {
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             compatible = "arm,amba-bus";
>> +             interrupt-parent = <&gic>;
>> +             ranges;
>> +
>> +             L2: l2-cache {
>> +                     compatible = "arm,pl310-cache";
>> +                     reg = <0xfc10000 0x100000>;
>> +                     interrupts = <0 15 4>;
>> +                     cache-unified;
>> +                     cache-level = <2>;
>> +             };
>
> For this node, we could use the same trick with the non-empty ranges, since
> all amba devices seem to be in the 0xfc000000 range.
>
OK.

> If you do that, it probably makes sense to move the clock controller under here
> as well.
Could I keep them into hi3620-clk.dtsi? Since both hi3620.dtsi &
hi3620-clk.dtsi are not small, merge them together only make people
reading hard.

>
>         Arnd

Best Regards
Haojian
Arnd Bergmann Oct. 16, 2013, 7:10 a.m. UTC | #3
On Wednesday 16 October 2013, Haojian Zhuang wrote:
> > If you do that, it probably makes sense to move the clock controller under here
> > as well.
> Could I keep them into hi3620-clk.dtsi? Since both hi3620.dtsi &
> hi3620-clk.dtsi are not small, merge them together only make people
> reading hard.

Yes, of course. The location in the tree is independent of what file they
are in. I was just suggesting to have the "clocks" node under "amba".

	Arnd
Linus Walleij Oct. 16, 2013, 7:26 a.m. UTC | #4
On Tue, Oct 15, 2013 at 8:18 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 15 October 2013, Haojian Zhuang wrote:

> Since all clocks are in the fc802000 page, I would prefer using a non-empty
> ranges to map the clocks into their own address space, like
>
>                 ranges = <0 0xfc802000 0x1000>;
>
>
>> +             timer4_mux: timer4_mux@fc802018 {
>> +                     compatible = "hisilicon,clk-mux";
>> +                     #clock-cells = <0>;
>> +                     clocks = <&osc32k &timerclk45>;
>> +                     clock-output-names = "timer4_mux";
>> +                     reg = <0xfc802018 0x4>;
>> +                     clkmux-mask = <0x3>;
>> +                     clkmux-table = <0 0x1>;
>> +             };
>
> which would turn this into
>
>                 timer4_mux: timer4_mux@18 {
>                         ...
>                         reg = <0x18 0x4>;
>                         ...
>                 };
>
> The code would not be impacted by this.

I'd rather question the addition of a reg =<>; specifier
for each and every clock.

Knowing the offsets of each and every register in a
memory-mapped device is usually overdesign, and
goes from specifying register base to specifying
register offsets and to me that is overspecifying.

I'd rather give each clock a unique ID or something,
then let the driver know the offsets, and specify the
base and size in the top node.

This becomes more obvious with a second silicon
revision moving the registers around - with this
design all of the clocks need updating, but if you're
lucky with less knowledge in the DTS you only need
a new compatible string and the knowledge of the new
whereabout for the regs is kept in the driver.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cc0f1fb..b4ec185 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,6 +64,7 @@  dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
+dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
new file mode 100644
index 0000000..51233d3
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620-clk.dtsi
@@ -0,0 +1,1052 @@ 
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc32k: osc32k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "osc32khz";
+		};
+		osc26m: osc26m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			clock-output-names = "osc26mhz";
+		};
+		pclk: pclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			clock-output-names = "apb_pclk";
+		};
+		pll_arm0: pll_arm0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+			clock-output-names = "armpll0";
+		};
+		pll_arm1: pll_arm1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+			clock-output-names = "armpll1";
+		};
+		pll_peri: pll_peri {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1440000000>;
+			clock-output-names = "armpll2";
+		};
+		pll_usb: pll_usb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1440000000>;
+			clock-output-names = "armpll3";
+		};
+		pll_hdmi: pll_hdmi {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1188000000>;
+			clock-output-names = "armpll4";
+		};
+		pll_gpu: pll_gpu {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1300000000>;
+			clock-output-names = "armpll5";
+		};
+		rclk_tcxo: rclk_tcxo {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&osc26m>;
+			clock-output-names = "rclk_tcxo";
+			clock-mult = <1>;
+			clock-div = <4>;
+		};
+		rclk_cfgaxi: rclk_cfgaxi {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll_peri>;
+			clock-output-names = "rclk_cfgaxi";
+			clock-mult = <1>;
+			clock-div = <30>;
+		};
+		rclk_pico: rclk_pico {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&hsic_div>;
+			clock-output-names = "rclk_pico";
+			clock-mult = <1>;
+			clock-div = <40>;
+		};
+
+		timer0_mux: timer0_mux@fc802000 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk01>;
+			clock-output-names = "timer0_mux";
+			reg = <0xfc802000 0x4>;
+			clkmux-mask = <0x18000>;
+			clkmux-table = <0 0x8000>;
+		};
+		timer1_mux: timer1_mux@fc802000 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk01>;
+			clock-output-names = "timer1_mux";
+			reg = <0xfc802000 0x4>;
+			clkmux-mask = <0x60000>;
+			clkmux-table = <0 0x20000>;
+		};
+		timer2_mux: timer2_mux@fc802000 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk23>;
+			clock-output-names = "timer2_mux";
+			reg = <0xfc802000 0x4>;
+			clkmux-mask = <0x180000>;
+			clkmux-table = <0 0x80000>;
+		};
+		timer3_mux: timer3_mux@fc802000 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk23>;
+			clock-output-names = "timer3_mux";
+			reg = <0xfc802000 0x4>;
+			clkmux-mask = <0x600000>;
+			clkmux-table = <0 0x200000>;
+		};
+		timer4_mux: timer4_mux@fc802018 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk45>;
+			clock-output-names = "timer4_mux";
+			reg = <0xfc802018 0x4>;
+			clkmux-mask = <0x3>;
+			clkmux-table = <0 0x1>;
+		};
+		timer5_mux: timer5_mux@fc802018 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk45>;
+			clock-output-names = "timer5_mux";
+			reg = <0xfc802018 0x4>;
+			clkmux-mask = <0xc>;
+			clkmux-table = <0 0x4>;
+		};
+		timer6_mux: timer6_mux@fc802018 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk67>;
+			clock-output-names = "timer6_mux";
+			reg = <0xfc802018 0x4>;
+			clkmux-mask = <0x30>;
+			clkmux-table = <0 0x10>;
+		};
+		timer7_mux: timer7_mux@fc802018 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk67>;
+			clock-output-names = "timer7_mux";
+			reg = <0xfc802018 0x4>;
+			clkmux-mask = <0xc0>;
+			clkmux-table = <0 0x40>;
+		};
+		timer8_mux: timer8_mux@fc802018 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk89>;
+			clock-output-names = "timer8_mux";
+			reg = <0xfc802018 0x4>;
+			clkmux-mask = <0x300>;
+			clkmux-table = <0 0x100>;
+		};
+		timer9_mux: timer9_mux@fc802018 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &timerclk89>;
+			clock-output-names = "timer9_mux";
+			reg = <0xfc802018 0x4>;
+			clkmux-mask = <0xc00>;
+			clkmux-table = <0 0x400>;
+		};
+
+		uart0_mux: uart0_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &pclk>;
+			clock-output-names = "uart0_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x80>;
+			/* each item value */
+			clkmux-table = <0 0x80>;
+			clkmux-hiword-mask;
+		};
+		uart1_mux: uart1_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &pclk>;
+			clock-output-names = "uart1_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x100>;
+			clkmux-table = <0x0 0x100>;
+			clkmux-hiword-mask;
+		};
+		uart2_mux: uart2_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &pclk>;
+			clock-output-names = "uart2_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x200>;
+			clkmux-table = <0 0x200>;
+			clkmux-hiword-mask;
+		};
+		uart3_mux: uart3_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &pclk>;
+			clock-output-names = "uart3_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x400>;
+			clkmux-table = <0 0x400>;
+			clkmux-hiword-mask;
+		};
+		uart4_mux: uart4_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &pclk>;
+			clock-output-names = "uart4_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x800>;
+			clkmux-table = <0 0x800>;
+			clkmux-hiword-mask;
+		};
+		spi0_mux: spi0_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &rclk_cfgaxi>;
+			clock-output-names = "spi0_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x1000>;
+			clkmux-table = <0 0x1000>;
+			clkmux-hiword-mask;
+		};
+		spi1_mux: spi1_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &rclk_cfgaxi>;
+			clock-output-names = "spi1_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x2000>;
+			clkmux-table = <0 0x2000>;
+			clkmux-hiword-mask;
+		};
+		spi2_mux: spi2_mux@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &rclk_cfgaxi>;
+			clock-output-names = "spi2_mux";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x4000>;
+			clkmux-table = <0 0x4000>;
+			clkmux-hiword-mask;
+		};
+		rclk_shareAXI: rclk_shareAXI@fc802100 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_usb &pll_peri>;
+			clock-output-names = "rclk_shareAXI";
+			reg = <0xfc802100 0x4>;
+			clkmux-mask = <0x8000>;
+			clkmux-table = <0 0x8000>;
+			clkmux-hiword-mask;
+		};
+		pwm0_mux: pwm0_mux@fc802104 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &osc26m>;
+			clock-output-names = "pwm0_mux";
+			reg = <0xfc802104 0x4>;
+			clkmux-mask = <0x400>;
+			clkmux-table = <0 0x400>;
+			clkmux-hiword-mask;
+		};
+		pwm1_mux: pwm1_mux@fc802104 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc32k &osc26m>;
+			clock-output-names = "pwm1_mux";
+			reg = <0xfc802104 0x4>;
+			clkmux-mask = <0x800>;
+			clkmux-table = <0 0x800>;
+			clkmux-hiword-mask;
+		};
+		sd_mux: sd_mux@fc802108 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_usb &pll_peri>;
+			clock-output-names = "sd_mux";
+			reg = <0xfc802108 0x4>;
+			clkmux-mask = <0x10>;
+			clkmux-table = <0 0x10>;
+			clkmux-hiword-mask;
+		};
+		mmc1_mux: mmc1_mux@fc802108 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_usb &pll_peri>;
+			clock-output-names = "mmc1_mux";
+			reg = <0xfc802108 0x4>;
+			clkmux-mask = <0x200>;
+			clkmux-table = <0 0x200>;
+			clkmux-hiword-mask;
+		};
+		rclk_mmc1_mux: rclk_mmc1_mux@fc802108 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&osc26m &mmc1_div>;
+			clock-output-names = "rclk_mmc1_mux";
+			reg = <0xfc802108 0x4>;
+			clkmux-mask = <0x400>;
+			clkmux-table = <0 0x400>;
+			clkmux-hiword-mask;
+		};
+		g2d_mux: g2d_mux@fc80210c {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_usb>;
+			clock-output-names = "g2d_mux";
+			reg = <0xfc80210c 0x4>;
+			clkmux-mask = <0x20>;
+			clkmux-table = <0 0x20>;
+			clkmux-hiword-mask;
+		};
+		venc_mux: venc_mux@fc80210c {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_usb>;
+			clock-output-names = "venc_mux";
+			reg = <0xfc80210c 0x4>;
+			clkmux-mask = <0x800>;
+			clkmux-table = <0 0x800>;
+			clkmux-hiword-mask;
+		};
+		vdec_mux: vdec_mux@fc802110 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_usb>;
+			clock-output-names = "vdec_mux";
+			reg = <0xfc802110 0x4>;
+			clkmux-mask = <0x20>;
+			clkmux-table = <0 0x20>;
+			clkmux-hiword-mask;
+		};
+		vpp_mux: vpp_mux@fc802110 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_usb>;
+			clock-output-names = "vpp_mux";
+			reg = <0xfc802110 0x4>;
+			clkmux-mask = <0x800>;
+			clkmux-table = <0 0x800>;
+			clkmux-hiword-mask;
+		};
+		edc0_mux: edc0_mux@fc802114 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_usb>;
+			clock-output-names = "edc0_mux";
+			reg = <0xfc802114 0x4>;
+			clkmux-mask = <0x40>;
+			clkmux-table = <0 0x40>;
+			clkmux-hiword-mask;
+		};
+		ldi0_mux: ldi0_mux@fc802114 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_hdmi &pll_usb &pll_gpu>;
+			clock-output-names = "ldi0_mux";
+			reg = <0xfc802114 0x4>;
+			clkmux-mask = <0x6000>;
+			clkmux-table = <0 0x2000 0x4000 0x6000>;
+			clkmux-hiword-mask;
+		};
+		edc1_mux: edc1_mux@fc802118 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_usb>;
+			clock-output-names = "edc1_mux";
+			reg = <0xfc802118 0x4>;
+			clkmux-mask = <0x40>;
+			clkmux-table = <0 0x40>;
+			clkmux-hiword-mask;
+		};
+		ldi1_mux: ldi1_mux@fc802118 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_peri &pll_hdmi &pll_usb &pll_gpu>;
+			clock-output-names = "ldi1_mux";
+			reg = <0xfc802118 0x4>;
+			clkmux-mask = <0xc000>;
+			clkmux-table = <0 0x4000 0x8000 0xc000>;
+			clkmux-hiword-mask;
+		};
+		rclk_hsic: rclk_hsic@fc802130 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_usb &pll_peri>;
+			clock-output-names = "rclk_hsic";
+			reg = <0xfc802130 0x4>;
+			clkmux-mask = <0x4>;
+			clkmux-table = <0 0x4>;
+			clkmux-hiword-mask;
+		};
+		mmc2_mux: mmc2_mux@fc802140 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_usb &pll_peri>;
+			clock-output-names = "mmc2_mux";
+			reg = <0xfc802140 0x4>;
+			clkmux-mask = <0x10>;
+			clkmux-table = <0 0x10>;
+			clkmux-hiword-mask;
+		};
+		mmc3_mux: mmc3_mux@fc802140 {
+			compatible = "hisilicon,clk-mux";
+			#clock-cells = <0>;
+			clocks = <&pll_usb &pll_peri>;
+			clock-output-names = "mmc3_mux";
+			reg = <0xfc802140 0x4>;
+			clkmux-mask = <0x200>;
+			clkmux-table = <0 0x200>;
+			clkmux-hiword-mask;
+		};
+
+		shareaxi_div: shareaxi_div@fc802100 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&rclk_shareAXI>;
+			clock-output-names = "shareaxi_div";
+			reg = <0xfc802100 0x4>;
+			clkdiv-mask = <0x1f>;
+			clkdiv-min = <1>;
+			clkdiv-max = <32>;
+			clkdiv-hiword-mask;
+		};
+		cfgaxi_div: cfgaxi_div@fc802100 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&shareaxi_div>;
+			clock-output-names = "cfgaxi_div";
+			reg = <0xfc802100 0x4>;
+			clkdiv-mask = <0x60>;
+			clkdiv-min = <2>;
+			clkdiv-max = <2>;
+			clkdiv-hiword-mask;
+		};
+		sd_div: sd_div@fc802108 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&sd_mux>;
+			clock-output-names = "sd_div";
+			reg = <0xfc802108 0x4>;
+			clkdiv-mask = <0xf>;
+			clkdiv-min = <1>;
+			clkdiv-max = <16>;
+			clkdiv-hiword-mask;
+		};
+		mmc1_div: mmc1_div@fc802108 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&mmc1_mux>;
+			clock-output-names = "mmc1_div";
+			reg = <0xfc802108 0x4>;
+			clkdiv-mask = <0x1e0>;
+			clkdiv-min = <1>;
+			clkdiv-max = <16>;
+			clkdiv-hiword-mask;
+		};
+		hsic_div: hsic_div@fc802130 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&rclk_hsic>;
+			clock-output-names = "hsic_div";
+			reg = <0xfc802130 0x4>;
+			clkdiv-mask = <0x3>;
+			clkdiv-min = <1>;
+			clkdiv-max = <4>;
+			clkdiv-hiword-mask;
+		};
+		mmc2_div: mmc2_div@fc802140 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&mmc1_mux>;
+			clock-output-names = "mmc2_div";
+			reg = <0xfc802140 0x4>;
+			clkdiv-mask = <0xf>;
+			clkdiv-min = <1>;
+			clkdiv-max = <16>;
+			clkdiv-hiword-mask;
+		};
+		mmc3_div: mmc3_div@fc802140 {
+			compatible = "hisilicon,clk-div";
+			#clock-cells = <0>;
+			clocks = <&mmc1_mux>;
+			clock-output-names = "mmc3_div";
+			reg = <0xfc802140 0x4>;
+			clkdiv-mask = <0x1e0>;
+			clkdiv-min = <1>;
+			clkdiv-max = <16>;
+			clkdiv-hiword-mask;
+		};
+
+		timerclk01: timerclk01@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&timer_rclk01>;
+			clock-output-names = "timerclk01";
+			reg = <0xfc802020 0x4>;
+			clkgate = <0>;
+			clkgate-seperated-reg;
+		};
+		timer_rclk01: timer_rclk01@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_tcxo>;
+			clock-output-names = "timer_rclk01";
+			reg = <0xfc802020 0x4>;
+			clkgate = <1>;
+			clkgate-seperated-reg;
+		};
+		timerclk23: timerclk23@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&timer_rclk23>;
+			clock-output-names = "timerclk23";
+			reg = <0xfc802020 0x4>;
+			clkgate = <2>;
+			clkgate-seperated-reg;
+		};
+		timer_rclk23: timer_rclk23@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_tcxo>;
+			clock-output-names = "timer_rclk23";
+			reg = <0xfc802020 0x4>;
+			clkgate = <3>;
+			clkgate-seperated-reg;
+		};
+		rtcclk: rtcclk@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "rtcclk";
+			reg = <0xfc802020 0x4>;
+			clkgate = <5>;
+			clkgate-seperated-reg;
+		};
+		kpc_clk: kpc_clk@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "kpc_clk";
+			reg = <0xfc802020 0x4>;
+			clkgate = <6>;
+			clkgate-seperated-reg;
+		};
+		gpioclk0: gpioclk0@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk0";
+			reg = <0xfc802020 0x4>;
+			clkgate = <8>;
+			clkgate-seperated-reg;
+		};
+		gpioclk1: gpioclk1@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk1";
+			reg = <0xfc802020 0x4>;
+			clkgate = <9>;
+			clkgate-seperated-reg;
+		};
+		gpioclk2: gpioclk2@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk2";
+			reg = <0xfc802020 0x4>;
+			clkgate = <10>;
+			clkgate-seperated-reg;
+		};
+		gpioclk3: gpioclk3@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk3";
+			reg = <0xfc802020 0x4>;
+			clkgate = <11>;
+			clkgate-seperated-reg;
+		};
+		gpioclk4: gpioclk4@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk4";
+			reg = <0xfc802020 0x4>;
+			clkgate = <12>;
+			clkgate-seperated-reg;
+		};
+		gpioclk5: gpioclk5@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk5";
+			reg = <0xfc802020 0x4>;
+			clkgate = <13>;
+			clkgate-seperated-reg;
+		};
+		gpioclk6: gpioclk6@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk6";
+			reg = <0xfc802020 0x4>;
+			clkgate = <14>;
+			clkgate-seperated-reg;
+		};
+		gpioclk7: gpioclk7@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk7";
+			reg = <0xfc802020 0x4>;
+			clkgate = <15>;
+			clkgate-seperated-reg;
+		};
+		gpioclk8: gpioclk8@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk8";
+			reg = <0xfc802020 0x4>;
+			clkgate = <16>;
+			clkgate-seperated-reg;
+		};
+		gpioclk9: gpioclk9@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk9";
+			reg = <0xfc802020 0x4>;
+			clkgate = <17>;
+			clkgate-seperated-reg;
+		};
+		gpioclk10: gpioclk10@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk10";
+			reg = <0xfc802020 0x4>;
+			clkgate = <18>;
+			clkgate-seperated-reg;
+		};
+		gpioclk11: gpioclk11@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk11";
+			reg = <0xfc802020 0x4>;
+			clkgate = <19>;
+			clkgate-seperated-reg;
+		};
+		gpioclk12: gpioclk12@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk12";
+			reg = <0xfc802020 0x4>;
+			clkgate = <20>;
+			clkgate-seperated-reg;
+		};
+		gpioclk13: gpioclk13@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk13";
+			reg = <0xfc802020 0x4>;
+			clkgate = <21>;
+			clkgate-seperated-reg;
+		};
+		gpioclk14: gpioclk14@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk14";
+			reg = <0xfc802020 0x4>;
+			clkgate = <22>;
+			clkgate-seperated-reg;
+		};
+		gpioclk15: gpioclk15@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk15";
+			reg = <0xfc802020 0x4>;
+			clkgate = <23>;
+			clkgate-seperated-reg;
+		};
+		gpioclk16: gpioclk16@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk16";
+			reg = <0xfc802020 0x4>;
+			clkgate = <24>;
+			clkgate-seperated-reg;
+		};
+		gpioclk17: gpioclk17@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk17";
+			reg = <0xfc802020 0x4>;
+			clkgate = <25>;
+			clkgate-seperated-reg;
+		};
+		gpioclk18: gpioclk18@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk18";
+			reg = <0xfc802020 0x4>;
+			clkgate = <26>;
+			clkgate-seperated-reg;
+		};
+		gpioclk19: gpioclk19@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk19";
+			reg = <0xfc802020 0x4>;
+			clkgate = <27>;
+			clkgate-seperated-reg;
+		};
+		gpioclk20: gpioclk20@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk20";
+			reg = <0xfc802020 0x4>;
+			clkgate = <28>;
+			clkgate-seperated-reg;
+		};
+		gpioclk21: gpioclk21@fc802020 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "gpioclk21";
+			reg = <0xfc802020 0x4>;
+			clkgate = <29>;
+			clkgate-seperated-reg;
+		};
+		dphy0_clk: dphy0_clk@fc802030 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&osc26m>;
+			clock-output-names = "dphy0_clk";
+			reg = <0xfc802030 0x4>;
+			clkgate = <15>;
+			clkgate-seperated-reg;
+		};
+		dphy1_clk: dphy1_clk@fc802030 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&osc26m>;
+			clock-output-names = "dphy1_clk";
+			reg = <0xfc802030 0x4>;
+			clkgate = <16>;
+			clkgate-seperated-reg;
+		};
+		dphy2_clk: dphy2_clk@fc802030 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&osc26m>;
+			clock-output-names = "dphy2_clk";
+			reg = <0xfc802030 0x4>;
+			clkgate = <17>;
+			clkgate-seperated-reg;
+		};
+		usbpicophy_clk: usbpicophy_clk@fc802030 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_pico>;
+			clock-output-names = "usbpicophy_clk";
+			reg = <0xfc802030 0x4>;
+			clkgate = <24>;
+			clkgate-seperated-reg;
+		};
+		acp_clk: acp_clk@fc802030 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_cfgaxi>;
+			clock-output-names = "acp_clk";
+			reg = <0xfc802030 0x4>;
+			clkgate = <28>;
+			clkgate-seperated-reg;
+		};
+		timerclk45: timerclk45@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_tcxo>;
+			clock-output-names = "timerclk45";
+			reg = <0xfc802040 0x4>;
+			clkgate = <3>;
+			clkgate-seperated-reg;
+		};
+		timerclk67: timerclk67@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_tcxo>;
+			clock-output-names = "timerclk67";
+			reg = <0xfc802040 0x4>;
+			clkgate = <4>;
+			clkgate-seperated-reg;
+		};
+		timerclk89: timerclk89@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_tcxo>;
+			clock-output-names = "timerclk89";
+			reg = <0xfc802040 0x4>;
+			clkgate = <5>;
+			clkgate-seperated-reg;
+		};
+		pwmclk0: pwmclk0@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pwm0_mux>;
+			clock-output-names = "pwmclk0";
+			reg = <0xfc802040 0x4>;
+			clkgate = <7>;
+			clkgate-seperated-reg;
+		};
+		pwmclk1: pwmclk1@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pwm1_mux>;
+			clock-output-names = "pwmclk1";
+			reg = <0xfc802040 0x4>;
+			clkgate = <8>;
+			clkgate-seperated-reg;
+		};
+		uartclk0: uartclk0@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&uart0_mux>;
+			clock-output-names = "uartclk0";
+			reg = <0xfc802040 0x4>;
+			clkgate = <16>;
+			clkgate-seperated-reg;
+		};
+		uartclk1: uartclk1@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&uart1_mux>;
+			clock-output-names = "uartclk1";
+			reg = <0xfc802040 0x4>;
+			clkgate = <17>;
+			clkgate-seperated-reg;
+		};
+		uartclk2: uartclk2@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&uart2_mux>;
+			clock-output-names = "uartclk2";
+			reg = <0xfc802040 0x4>;
+			clkgate = <18>;
+			clkgate-seperated-reg;
+		};
+		uartclk3: uartclk3@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&uart3_mux>;
+			clock-output-names = "uartclk3";
+			reg = <0xfc802040 0x4>;
+			clkgate = <19>;
+			clkgate-seperated-reg;
+		};
+		uartclk4: uartclk4@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&uart4_mux>;
+			clock-output-names = "uartclk4";
+			reg = <0xfc802040 0x4>;
+			clkgate = <20>;
+			clkgate-seperated-reg;
+		};
+		spiclk0: spiclk0@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&spi0_mux>;
+			clock-output-names = "spiclk0";
+			reg = <0xfc802040 0x4>;
+			clkgate = <21>;
+			clkgate-seperated-reg;
+		};
+		spiclk1: spiclk1@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&spi1_mux>;
+			clock-output-names = "spiclk1";
+			reg = <0xfc802040 0x4>;
+			clkgate = <22>;
+			clkgate-seperated-reg;
+		};
+		spiclk2: spiclk2@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&spi2_mux>;
+			clock-output-names = "spiclk2";
+			reg = <0xfc802040 0x4>;
+			clkgate = <23>;
+			clkgate-seperated-reg;
+		};
+		i2cclk0: i2cclk0@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "i2cclk0";
+			reg = <0xfc802040 0x4>;
+			clkgate = <24>;
+			clkgate-seperated-reg;
+		};
+		i2cclk1: i2cclk1@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "i2cclk1";
+			reg = <0xfc802040 0x4>;
+			clkgate = <25>;
+			clkgate-seperated-reg;
+		};
+		sci_clk: sci_clk@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&osc26m>;
+			clock-output-names = "sci_clk";
+			reg = <0xfc802040 0x4>;
+			clkgate = <26>;
+			clkgate-seperated-reg;
+		};
+		i2cclk2: i2cclk2@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "i2cclk2";
+			reg = <0xfc802040 0x4>;
+			clkgate = <28>;
+			clkgate-seperated-reg;
+		};
+		i2cclk3: i2cclk3@fc802040 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&pclk>;
+			clock-output-names = "i2cclk3";
+			reg = <0xfc802040 0x4>;
+			clkgate = <29>;
+			clkgate-seperated-reg;
+		};
+		ddrc_per_clk: ddrc_per_clk@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_cfgaxi>;
+			clock-output-names = "ddrc_per_clk";
+			reg = <0xfc802050 0x4>;
+			clkgate = <9>;
+			clkgate-seperated-reg;
+		};
+		dmac_clk: dmac_clk@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_cfgaxi>;
+			clock-output-names = "dmac_clk";
+			reg = <0xfc802050 0x4>;
+			clkgate = <10>;
+			clkgate-seperated-reg;
+		};
+		usb2dvc_clk: usb2dvc_clk@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_cfgaxi>;
+			clock-output-names = "usb2dvc_clk";
+			reg = <0xfc802050 0x4>;
+			clkgate = <10>;
+			clkgate-seperated-reg;
+		};
+		sd_clk: sd_clk@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&sd_div>;
+			clock-output-names = "sd_clk";
+			reg = <0xfc802050 0x4>;
+			clkgate = <20>;
+			clkgate-seperated-reg;
+		};
+		mmc_clk1: mmc_clk1@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&rclk_mmc1_mux>;
+			clock-output-names = "mmc_clk1";
+			reg = <0xfc802050 0x4>;
+			clkgate = <21>;
+			clkgate-seperated-reg;
+		};
+		mmc_clk2: mmc_clk2@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&mmc2_div>;
+			clock-output-names = "mmc_clk2";
+			reg = <0xfc802050 0x4>;
+			clkgate = <22>;
+			clkgate-seperated-reg;
+		};
+		mmc_clk3: mmc_clk3@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&mmc3_div>;
+			clock-output-names = "mmc_clk3";
+			reg = <0xfc802050 0x4>;
+			clkgate = <23>;
+			clkgate-seperated-reg;
+		};
+		mcu_clk: mcu_clk@fc802050 {
+			compatible = "hisilicon,clk-gate";
+			#clock-cells = <0>;
+			clocks = <&acp_clk>;
+			clock-output-names = "mcu_clk";
+			reg = <0xfc802050 0x4>;
+			clkgate = <24>;
+			clkgate-seperated-reg;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
new file mode 100644
index 0000000..e05c65c
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -0,0 +1,513 @@ 
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/include/ "hi3620-clk.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xfc10000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@fc001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			/* gic dist base, gic cpu base */
+			reg = <0xfc001000 0x1000>, <0xfc000100 0x100>;
+		};
+
+		dual_timer0: dual_timer@fc800000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfc800000 0x1000>;
+			/* timer00 & timer01 */
+			interrupts = <0 0 4>, <0 1 4>;
+			clocks = <&timer0_mux &timer1_mux>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer1: dual_timer@fc801000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfc801000 0x1000>;
+			/* timer10 & timer11 */
+			interrupts = <0 2 4>, <0 3 4>;
+			clocks = <&timer2_mux &timer3_mux>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer2: dual_timer@fca01000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfca01000 0x1000>;
+			/* timer20 & timer21 */
+			interrupts = <0 4 4>, <0 5 4>;
+			clocks = <&timer4_mux &timer5_mux>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer3: dual_timer@fca02000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfca02000 0x1000>;
+			/* timer30 & timer31 */
+			interrupts = <0 6 4>, <0 7 4>;
+			clocks = <&timer6_mux &timer7_mux>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer4: dual_timer@fca03000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfca03000 0x1000>;
+			/* timer40 & timer41 */
+			interrupts = <0 96 4>, <0 97 4>;
+			clocks = <&timer8_mux &timer9_mux>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart0: uart@fcb00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfcb00000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&uartclk0>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: uart@fcb01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfcb01000 0x1000>;
+			interrupts = <0 21 4>;
+			clocks = <&uartclk1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: uart@fcb02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfcb02000 0x1000>;
+			interrupts = <0 22 4>;
+			clocks = <&uartclk2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: uart@fcb03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfcb03000 0x1000>;
+			interrupts = <0 23 4>;
+			clocks = <&uartclk3>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: uart@fcb04000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfcb04000 0x1000>;
+			interrupts = <0 24 4>;
+			clocks = <&uartclk4>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio0: gpio@fc806000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc806000 0x1000>;
+			interrupts = <0 64 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@fc807000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc807000 0x1000>;
+			interrupts = <0 65 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+					&pmx0 6 5 1 &pmx0 7 6 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@fc808000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc808000 0x1000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+					&pmx0 6 3 1 &pmx0 7 3 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@fc809000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc809000 0x1000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+					&pmx0 6 11 1 &pmx0 7 11 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@fc80a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc80a000 0x1000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+					&pmx0 6 13 1 &pmx0 7 13 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@fc80b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc80b000 0x1000>;
+			interrupts = <0 69 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+					&pmx0 6 16 1 &pmx0 7 16 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@fc80c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc80c000 0x1000>;
+			interrupts = <0 70 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+					&pmx0 6 18 1 &pmx0 7 19 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@fc80d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc80d000 0x1000>;
+			interrupts = <0 71 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+					&pmx0 6 25 1 &pmx0 7 26 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@fc80e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc80e000 0x1000>;
+			interrupts = <0 72 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+					&pmx0 6 33 1 &pmx0 7 34 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@fc80f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc80f000 0x1000>;
+			interrupts = <0 73 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+					&pmx0 6 41 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@fc810000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc810000 0x1000>;
+			interrupts = <0 74 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@fc811000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc811000 0x1000>;
+			interrupts = <0 75 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+					&pmx0 6 49 1 &pmx0 7 49 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@fc812000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc812000 0x1000>;
+			interrupts = <0 76 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+					&pmx0 6 51 1 &pmx0 7 52 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@fc813000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc813000 0x1000>;
+			interrupts = <0 77 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+					&pmx0 6 55 1 &pmx0 7 56 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@fc814000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc814000 0x1000>;
+			interrupts = <0 78 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+					&pmx0 6 60 1 &pmx0 7 61 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@fc815000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc815000 0x1000>;
+			interrupts = <0 79 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+					&pmx0 6 64 1 &pmx0 7 65 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@fc816000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc816000 0x1000>;
+			interrupts = <0 80 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+					&pmx0 6 72 1 &pmx0 7 73 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@fc817000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc817000 0x1000>;
+			interrupts = <0 81 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+					&pmx0 6 80 1 &pmx0 7 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@fc818000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc818000 0x1000>;
+			interrupts = <0 82 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+					&pmx0 6 86 1 &pmx0 7 87 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@fc819000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc819000 0x1000>;
+			interrupts = <0 83 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+					&pmx0 3 88 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@fc81a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc81a000 0x1000>;
+			interrupts = <0 84 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@fc81b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0xfc81b000 0x1000>;
+			interrupts = <0 85 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&gpioclk21>;
+			clock-names = "apb_pclk";
+		};
+
+		pmx0: pinmux@fc803000 {
+			compatible = "pinctrl-single";
+			reg = <0xfc803000 0x188>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#gpio-range-cells = <3>;
+			ranges;
+
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+						&range 12 1 0 &range 13 29 1
+						&range 43 1 0 &range 44 49 1
+						&range 94 1 1 &range 96 2 1>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		pmx1: pinmux@fc803800 {
+			compatible = "pinconf-single";
+			reg = <0xfc803800 0x2dc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pinctrl-single,register-width = <32>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts
new file mode 100644
index 0000000..d45104e
--- /dev/null
+++ b/arch/arm/boot/dts/hi4511.dts
@@ -0,0 +1,648 @@ 
+/*
+ *  Copyright (C) 2012-2013 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "hi3620.dtsi"
+
+/ {
+	model = "Hisilicon Hi4511 Development Board";
+	compatible = "hisilicon,hi3620-hi4511";
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	amba {
+		dual_timer0: dual_timer@fc800000 {
+			status = "ok";
+		};
+
+		uart0: uart@fcb00000 {	/* console */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+			status = "ok";
+		};
+
+		uart1: uart@fcb01000 { /* modem */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+			status = "ok";
+		};
+
+		uart2: uart@fcb02000 { /* audience */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+			status = "ok";
+		};
+
+		uart3: uart@fcb03000 {
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+			status = "ok";
+		};
+
+		uart4: uart@fcb04000 {
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+			status = "ok";
+		};
+
+		pmx0: pinmux@fc803000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&board_pmx_pins>;
+
+			board_pmx_pins: board_pmx_pins {
+				pinctrl-single,pins = <
+					0x008 0x0	/* GPIO -- eFUSE_DOUT */
+					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
+				>;
+			};
+			uart0_pmx_func: uart0_pmx_func {
+				pinctrl-single,pins = <
+					0x0f0 0x0
+					0x0f4 0x0	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart0_pmx_idle: uart0_pmx_idle {
+				pinctrl-single,pins = <
+					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
+					0x0f4 0x1	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart1_pmx_func: uart1_pmx_func {
+				pinctrl-single,pins = <
+					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
+					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
+				>;
+			};
+			uart1_pmx_idle: uart1_pmx_idle {
+				pinctrl-single,pins = <
+					0x0f8 0x1	/* GPIO (IOMG61) */
+					0x0fc 0x1	/* GPIO (IOMG62) */
+				>;
+			};
+			uart2_pmx_func: uart2_pmx_func {
+				pinctrl-single,pins = <
+					0x104 0x2	/* UART2_RXD (IOMG96) */
+					0x108 0x2	/* UART2_TXD (IOMG64) */
+				>;
+			};
+			uart2_pmx_idle: uart2_pmx_idle {
+				pinctrl-single,pins = <
+					0x104 0x1	/* GPIO (IOMG96) */
+					0x108 0x1	/* GPIO (IOMG64) */
+				>;
+			};
+			uart3_pmx_func: uart3_pmx_func {
+				pinctrl-single,pins = <
+					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
+					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
+				>;
+			};
+			uart3_pmx_idle: uart3_pmx_idle {
+				pinctrl-single,pins = <
+					0x160 0x1	/* GPIO (IOMG85) */
+					0x164 0x1	/* GPIO (IOMG86) */
+				>;
+			};
+			uart4_pmx_func: uart4_pmx_func {
+				pinctrl-single,pins = <
+					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
+					0x16c 0x0	/* UART4_RXD (IOMG88) */
+					0x170 0x0	/* UART4_TXD (IOMG93) */
+				>;
+			};
+			uart4_pmx_idle: uart4_pmx_idle {
+				pinctrl-single,pins = <
+					0x168 0x1	/* GPIO (IOMG87) */
+					0x16c 0x1	/* GPIO (IOMG88) */
+					0x170 0x1	/* GPIO (IOMG93) */
+				>;
+			};
+			i2c0_pmx_func: i2c0_pmx_func {
+				pinctrl-single,pins = <
+					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
+				>;
+			};
+			i2c0_pmx_idle: i2c0_pmx_idle {
+				pinctrl-single,pins = <
+					0x0b4 0x1	/* GPIO (IOMG45) */
+				>;
+			};
+			i2c1_pmx_func: i2c1_pmx_func {
+				pinctrl-single,pins = <
+					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
+				>;
+			};
+			i2c1_pmx_idle: i2c1_pmx_idle {
+				pinctrl-single,pins = <
+					0x0b8 0x1	/* GPIO (IOMG46) */
+				>;
+			};
+			i2c2_pmx_func: i2c2_pmx_func {
+				pinctrl-single,pins = <
+					0x068 0x0	/* I2C2_SCL (IOMG26) */
+					0x06c 0x0	/* I2C2_SDA (IOMG27) */
+				>;
+			};
+			i2c2_pmx_idle: i2c2_pmx_idle {
+				pinctrl-single,pins = <
+					0x068 0x1	/* GPIO (IOMG26) */
+					0x06c 0x1	/* GPIO (IOMG27) */
+				>;
+			};
+			i2c3_pmx_func: i2c3_pmx_func {
+				pinctrl-single,pins = <
+					0x050 0x2	/* I2C3_SCL (IOMG20) */
+					0x054 0x2	/* I2C3_SDA (IOMG21) */
+				>;
+			};
+			i2c3_pmx_idle: i2c3_pmx_idle {
+				pinctrl-single,pins = <
+					0x050 0x1	/* GPIO (IOMG20) */
+					0x054 0x1	/* GPIO (IOMG21) */
+				>;
+			};
+			spi0_pmx_func: spi0_pmx_func {
+				pinctrl-single,pins = <
+					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
+					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
+					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
+					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
+				>;
+			};
+			spi0_pmx_idle: spi0_pmx_idle {
+				pinctrl-single,pins = <
+					0x0d4 0x1	/* GPIO (IOMG53) */
+					0x0d8 0x1	/* GPIO (IOMG54) */
+					0x0dc 0x1	/* GPIO (IOMG55) */
+					0x0e0 0x1	/* GPIO (IOMG56) */
+					0x0e4 0x1	/* GPIO (IOMG57) */
+				>;
+			};
+			spi1_pmx_func: spi1_pmx_func {
+				pinctrl-single,pins = <
+					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
+					0x0e8 0x0	/* SPI1_DO (IOMG58) */
+					0x0ec 0x0	/* SPI1_CS (IOMG95) */
+				>;
+			};
+			spi1_pmx_idle: spi1_pmx_idle {
+				pinctrl-single,pins = <
+					0x184 0x1	/* GPIO (IOMG98) */
+					0x0e8 0x1	/* GPIO (IOMG58) */
+					0x0ec 0x1	/* GPIO (IOMG95) */
+				>;
+			};
+			kpc_pmx_func: kpc_pmx_func {
+				pinctrl-single,pins = <
+					0x12c 0x0	/* KEY_IN0 (IOMG73) */
+					0x130 0x0	/* KEY_IN1 (IOMG74) */
+					0x134 0x0	/* KEY_IN2 (IOMG75) */
+					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
+					0x110 0x0	/* KEY_OUT1 (IOMG66) */
+					0x114 0x0	/* KEY_OUT2 (IOMG67) */
+				>;
+			};
+			kpc_pmx_idle: kpc_pmx_idle {
+				pinctrl-single,pins = <
+					0x12c 0x1	/* GPIO (IOMG73) */
+					0x130 0x1	/* GPIO (IOMG74) */
+					0x134 0x1	/* GPIO (IOMG75) */
+					0x10c 0x1	/* GPIO (IOMG65) */
+					0x110 0x1	/* GPIO (IOMG66) */
+					0x114 0x1	/* GPIO (IOMG67) */
+				>;
+			};
+			gpio_key_func: gpio_key_func {
+				pinctrl-single,pins = <
+					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
+					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
+				>;
+			};
+			emmc_pmx_func: emmc_pmx_func {
+				pinctrl-single,pins = <
+					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
+				>;
+			};
+			emmc_pmx_idle: emmc_pmx_idle {
+				pinctrl-single,pins = <
+					0x030 0x0	/* GPIO (IOMG12) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sd_pmx_func: sd_pmx_func {
+				pinctrl-single,pins = <
+					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
+				>;
+			};
+			sd_pmx_idle: sd_pmx_idle {
+				pinctrl-single,pins = <
+					0x0bc 0x1	/* GPIO (IOMG47) */
+					0x0c0 0x1	/* GPIO (IOMG48) */
+				>;
+			};
+			nand_pmx_func: nand_pmx_func {
+				pinctrl-single,pins = <
+					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+					0x010 0x0	/* NAND_CS1_N (IOMG4) */
+					0x014 0x0	/* NAND_CS2_N (IOMG5) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
+					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
+				>;
+			};
+			nand_pmx_idle: nand_pmx_idle {
+				pinctrl-single,pins = <
+					0x00c 0x1	/* GPIO (IOMG3) */
+					0x010 0x1	/* GPIO (IOMG4) */
+					0x014 0x1	/* GPIO (IOMG5) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x01c 0x1	/* GPIO (IOMG94) */
+					0x020 0x1	/* GPIO (IOMG7) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sdio_pmx_func: sdio_pmx_func {
+				pinctrl-single,pins = <
+					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+				>;
+			};
+			sdio_pmx_idle: sdio_pmx_idle {
+				pinctrl-single,pins = <
+					0x0c4 0x1	/* GPIO (IOMG49) */
+				>;
+			};
+			audio_out_pmx_func: audio_out_pmx_func {
+				pinctrl-single,pins = <
+					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
+				>;
+			};
+		};
+
+		pmx1: pinmux@fc803800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
+					&board_np_pins &board_ps_pins &kpc_cfg_func
+					&audio_out_cfg_func>;
+			board_pu_pins: board_pu_pins {
+				pinctrl-single,pins = <
+					0x014 0		/* GPIO_158 (IOCFG2) */
+					0x018 0		/* GPIO_159 (IOCFG3) */
+					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
+					0x020 0		/* BOOT_MODE1 (IOCFG5) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+			};
+			board_pd_pins: board_pd_pins {
+				pinctrl-single,pins = <
+					0x038 0		/* eFUSE_DOUT (IOCFG11) */
+					0x150 0		/* ISP_GPIO8 (IOCFG93) */
+					0x154 0		/* ISP_GPIO9 (IOCFG94) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_pd_ps_pins: board_pd_ps_pins {
+				pinctrl-single,pins = <
+					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
+					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			board_np_pins: board_np_pins {
+				pinctrl-single,pins = <
+					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_ps_pins: board_ps_pins {
+				pinctrl-single,pins = <
+					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
+					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
+				>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			uart0_cfg_func: uart0_cfg_func {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart0_cfg_idle: uart0_cfg_idle {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_func: uart1_cfg_func {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_idle: uart1_cfg_idle {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_func: uart2_cfg_func {
+				pinctrl-single,pins = <
+					0x220 0		/* UART2_CTS (IOCFG144) */
+					0x224 0		/* UART2_RTS (IOCFG145) */
+					0x228 0		/* UART2_RXD (IOCFG146) */
+					0x22c 0		/* UART2_TXD (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_idle: uart2_cfg_idle {
+				pinctrl-single,pins = <
+					0x220 0		/* GPIO (IOCFG144) */
+					0x224 0		/* GPIO (IOCFG145) */
+					0x228 0		/* GPIO (IOCFG146) */
+					0x22c 0		/* GPIO (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_func: uart3_cfg_func {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_idle: uart3_cfg_idle {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart4_cfg_func: uart4_cfg_func {
+				pinctrl-single,pins = <
+					0x2a4 0		/* UART4_CTS (IOCFG177) */
+					0x2a8 0		/* UART4_RTS (IOCFG178) */
+					0x2ac 0		/* UART4_RXD (IOCFG179) */
+					0x2b0 0		/* UART4_TXD (IOCFG180) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			i2c0_cfg_func: i2c0_cfg_func {
+				pinctrl-single,pins = <
+					0x17c 0		/* I2C0_SCL (IOCFG103) */
+					0x180 0		/* I2C0_SDA (IOCFG104) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c1_cfg_func: i2c1_cfg_func {
+				pinctrl-single,pins = <
+					0x184 0		/* I2C1_SCL (IOCFG105) */
+					0x188 0		/* I2C1_SDA (IOCFG106) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c2_cfg_func: i2c2_cfg_func {
+				pinctrl-single,pins = <
+					0x118 0		/* I2C2_SCL (IOCFG79) */
+					0x11c 0		/* I2C2_SDA (IOCFG80) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c3_cfg_func: i2c3_cfg_func {
+				pinctrl-single,pins = <
+					0x100 0		/* I2C3_SCL (IOCFG73) */
+					0x104 0		/* I2C3_SDA (IOCFG74) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func1: spi0_cfg_func1 {
+				pinctrl-single,pins = <
+					0x1d4 0		/* SPI0_CLK (IOCFG125) */
+					0x1d8 0		/* SPI0_DI (IOCFG126) */
+					0x1dc 0		/* SPI0_DO (IOCFG127) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func2: spi0_cfg_func2 {
+				pinctrl-single,pins = <
+					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
+					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
+					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
+					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func1: spi1_cfg_func1 {
+				pinctrl-single,pins = <
+					0x1f0 0		/* SPI1_CLK (IOCFG132) */
+					0x1f4 0		/* SPI1_DI (IOCFG133) */
+					0x1f8 0		/* SPI1_DO (IOCFG134) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func2: spi1_cfg_func2 {
+				pinctrl-single,pins = <
+					0x1fc 0		/* SPI1_CS (IOCFG135) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			kpc_cfg_func: kpc_cfg_func {
+				pinctrl-single,pins = <
+					0x250 0		/* KEY_IN0 (IOCFG156) */
+					0x254 0		/* KEY_IN1 (IOCFG157) */
+					0x258 0		/* KEY_IN2 (IOCFG158) */
+					0x230 0		/* KEY_OUT0 (IOCFG148) */
+					0x234 0		/* KEY_OUT1 (IOCFG149) */
+					0x238 0		/* KEY_OUT2 (IOCFG150) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			emmc_cfg_func: emmc_cfg_func {
+				pinctrl-single,pins = <
+					0x0ac 0		/* eMMC_CMD (IOCFG40) */
+					0x0b0 0		/* eMMC_CLK (IOCFG41) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func1: sd_cfg_func1 {
+				pinctrl-single,pins = <
+					0x18c 0		/* SD_CLK (IOCFG107) */
+					0x190 0		/* SD_CMD (IOCFG108) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func2: sd_cfg_func2 {
+				pinctrl-single,pins = <
+					0x194 0		/* SD_DATA0 (IOCFG109) */
+					0x198 0		/* SD_DATA1 (IOCFG110) */
+					0x19c 0		/* SD_DATA2 (IOCFG111) */
+					0x1a0 0		/* SD_DATA3 (IOCFG112) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x70 0xf0>;
+			};
+			nand_cfg_func1: nand_cfg_func1 {
+				pinctrl-single,pins = <
+					0x03c 0		/* NAND_ALE (IOCFG12) */
+					0x040 0		/* NAND_CLE (IOCFG13) */
+					0x06c 0		/* NAND_DATA0 (IOCFG24) */
+					0x070 0		/* NAND_DATA1 (IOCFG25) */
+					0x074 0		/* NAND_DATA2 (IOCFG26) */
+					0x078 0		/* NAND_DATA3 (IOCFG27) */
+					0x07c 0		/* NAND_DATA4 (IOCFG28) */
+					0x080 0		/* NAND_DATA5 (IOCFG29) */
+					0x084 0		/* NAND_DATA6 (IOCFG30) */
+					0x088 0		/* NAND_DATA7 (IOCFG31) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			nand_cfg_func2: nand_cfg_func2 {
+				pinctrl-single,pins = <
+					0x044 0		/* NAND_RE_N (IOCFG14) */
+					0x048 0		/* NAND_WE_N (IOCFG15) */
+					0x04c 0		/* NAND_CS0_N (IOCFG16) */
+					0x050 0		/* NAND_CS1_N (IOCFG17) */
+					0x054 0		/* NAND_CS2_N (IOCFG18) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
+					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sdio_cfg_func: sdio_cfg_func {
+				pinctrl-single,pins = <
+					0x1a4 0		/* SDIO0_CLK (IOCG113) */
+					0x1a8 0		/* SDIO0_CMD (IOCG114) */
+					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
+					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
+					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
+					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			audio_out_cfg_func: audio_out_cfg_func {
+				pinctrl-single,pins = <
+					0x200 0		/* GPIO (IOCFG136) */
+					0x204 0		/* GPIO (IOCFG137) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		call {
+			label = "call";
+			gpios = <&gpio17 2 0>;
+			linux,code = <169>;	/* KEY_PHONE */
+		};
+	};
+};