Message ID | 1382716658-6964-11-git-send-email-t-kristo@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 10/25/2013 10:57 AM, Tero Kristo wrote: > This behaves exactly in similar manner to basic fixed-factor-clock, but > adds a few properties on top for handling clock hardware autoidling. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > --- > .../bindings/clock/ti/fixed-factor-clock.txt | 29 +++++++++ > drivers/clk/ti/Makefile | 2 +- > drivers/clk/ti/fixed-factor.c | 65 ++++++++++++++++++++ > 3 files changed, 95 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt > create mode 100644 drivers/clk/ti/fixed-factor.c > > diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt > new file mode 100644 > index 0000000..60b9e34 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt > @@ -0,0 +1,29 @@ > +Binding for TI fixed factor rate clock sources. > + > +Binding status: Unstable - ABI compatibility may be broken in the future > + > +This binding uses the common clock binding[1]. > + > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt > + > +Required properties: > +- compatible : shall be "ti,fixed-factor-clock". > +- #clock-cells : from common clock binding; shall be set to 0. > +- ti,clock-div: fixed divider. > +- ti,clock-mult: fixed multiplier. > +- clocks: parent clock. > + > +Optional properties: > +- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock > +- reg: offset for the autoidle register of this clock > +- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0 The above three belong to autoidle stuff I think.. maybe pointing to it's binding will help? > +- ti,set-rate-parent: clk_set_rate is propagated to parent > + > +Example: > + clock { > + compatible = "ti,fixed-factor-clock"; > + clocks = <&parentclk>; > + #clock-cells = <0>; > + ti,clock-div = <2>; > + ti,clock-mult = <1>; > + }; > diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile > index 640ebf9..f57fc4b 100644 > --- a/drivers/clk/ti/Makefile > +++ b/drivers/clk/ti/Makefile > @@ -1,4 +1,4 @@ > ifneq ($(CONFIG_OF),) > obj-y += clk.o dpll.o autoidle.o divider.o \ > - composite.o > + fixed-factor.o composite.o > endif > diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c > new file mode 100644 > index 0000000..e0549c6 > --- /dev/null > +++ b/drivers/clk/ti/fixed-factor.c > @@ -0,0 +1,65 @@ > +/* > + * TI Fixed Factor Clock > + * > + * Copyright (C) 2013 Texas Instruments, Inc. > + * > + * Tero Kristo <t-kristo@ti.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/slab.h> > +#include <linux/err.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/clk/ti.h> > + > +/** > + * of_ti_fixed_factor_clk_setup() - Setup function for TI fixed factor clock > + */ > +static int __init of_ti_fixed_factor_clk_setup(struct device_node *node, > + struct regmap *regmap) > +{ > + struct clk *clk; > + const char *clk_name = node->name; > + const char *parent_name; > + u32 div, mult; > + u32 flags = 0; > + > + if (of_property_read_u32(node, "ti,clock-div", &div)) { > + pr_err("%s Fixed factor clock <%s> must have a clock-div property\n", > + __func__, node->name); > + return -EINVAL; > + } > + > + if (of_property_read_u32(node, "ti,clock-mult", &mult)) { > + pr_err("%s Fixed factor clock <%s> must have a clokc-mult property\n", > + __func__, node->name); > + return -EINVAL; > + } > + > + if (of_property_read_bool(node, "ti,set-rate-parent")) > + flags |= CLK_SET_RATE_PARENT; > + > + parent_name = of_clk_get_parent_name(node, 0); > + > + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags, > + mult, div); > + > + if (!IS_ERR(clk)) { > + of_clk_add_provider(node, of_clk_src_simple_get, clk); > + return of_ti_autoidle_setup(node, regmap); if this fails, remove provider and unregister? > + } > + > + return PTR_ERR(clk); > +} > +CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock", > + of_ti_fixed_factor_clk_setup); >
On 10/31/2013 08:12 PM, Nishanth Menon wrote: > On 10/25/2013 10:57 AM, Tero Kristo wrote: >> This behaves exactly in similar manner to basic fixed-factor-clock, but >> adds a few properties on top for handling clock hardware autoidling. >> >> Signed-off-by: Tero Kristo <t-kristo@ti.com> >> --- >> .../bindings/clock/ti/fixed-factor-clock.txt | 29 +++++++++ >> drivers/clk/ti/Makefile | 2 +- >> drivers/clk/ti/fixed-factor.c | 65 ++++++++++++++++++++ >> 3 files changed, 95 insertions(+), 1 deletion(-) >> create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt >> create mode 100644 drivers/clk/ti/fixed-factor.c >> >> diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt >> new file mode 100644 >> index 0000000..60b9e34 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt >> @@ -0,0 +1,29 @@ >> +Binding for TI fixed factor rate clock sources. >> + >> +Binding status: Unstable - ABI compatibility may be broken in the future >> + >> +This binding uses the common clock binding[1]. >> + >> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt >> + >> +Required properties: >> +- compatible : shall be "ti,fixed-factor-clock". >> +- #clock-cells : from common clock binding; shall be set to 0. >> +- ti,clock-div: fixed divider. >> +- ti,clock-mult: fixed multiplier. >> +- clocks: parent clock. >> + >> +Optional properties: >> +- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock >> +- reg: offset for the autoidle register of this clock >> +- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0 > > The above three belong to autoidle stuff I think.. maybe pointing to > it's binding will help? > >> +- ti,set-rate-parent: clk_set_rate is propagated to parent >> + >> +Example: >> + clock { >> + compatible = "ti,fixed-factor-clock"; >> + clocks = <&parentclk>; >> + #clock-cells = <0>; >> + ti,clock-div = <2>; >> + ti,clock-mult = <1>; >> + }; >> diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile >> index 640ebf9..f57fc4b 100644 >> --- a/drivers/clk/ti/Makefile >> +++ b/drivers/clk/ti/Makefile >> @@ -1,4 +1,4 @@ >> ifneq ($(CONFIG_OF),) >> obj-y += clk.o dpll.o autoidle.o divider.o \ >> - composite.o >> + fixed-factor.o composite.o >> endif >> diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c >> new file mode 100644 >> index 0000000..e0549c6 >> --- /dev/null >> +++ b/drivers/clk/ti/fixed-factor.c >> @@ -0,0 +1,65 @@ >> +/* >> + * TI Fixed Factor Clock >> + * >> + * Copyright (C) 2013 Texas Instruments, Inc. >> + * >> + * Tero Kristo <t-kristo@ti.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any >> + * kind, whether express or implied; without even the implied warranty >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/slab.h> >> +#include <linux/err.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/clk/ti.h> >> + >> +/** >> + * of_ti_fixed_factor_clk_setup() - Setup function for TI fixed factor clock >> + */ >> +static int __init of_ti_fixed_factor_clk_setup(struct device_node *node, >> + struct regmap *regmap) >> +{ >> + struct clk *clk; >> + const char *clk_name = node->name; >> + const char *parent_name; >> + u32 div, mult; >> + u32 flags = 0; >> + >> + if (of_property_read_u32(node, "ti,clock-div", &div)) { >> + pr_err("%s Fixed factor clock <%s> must have a clock-div property\n", >> + __func__, node->name); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_u32(node, "ti,clock-mult", &mult)) { >> + pr_err("%s Fixed factor clock <%s> must have a clokc-mult property\n", >> + __func__, node->name); >> + return -EINVAL; >> + } >> + >> + if (of_property_read_bool(node, "ti,set-rate-parent")) >> + flags |= CLK_SET_RATE_PARENT; >> + >> + parent_name = of_clk_get_parent_name(node, 0); >> + >> + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags, >> + mult, div); >> + >> + if (!IS_ERR(clk)) { >> + of_clk_add_provider(node, of_clk_src_simple_get, clk); >> + return of_ti_autoidle_setup(node, regmap); > > if this fails, remove provider and unregister? Unregister is not supported currently. I don't think I want to do partial cleanup here, failing autoidle setup is not critical anyway. The system will still boot-up properly, only PM is potentially broken. Can add an error print though. -Tero > >> + } >> + >> + return PTR_ERR(clk); >> +} >> +CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock", >> + of_ti_fixed_factor_clk_setup); >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt new file mode 100644 index 0000000..60b9e34 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -0,0 +1,29 @@ +Binding for TI fixed factor rate clock sources. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,fixed-factor-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- ti,clock-div: fixed divider. +- ti,clock-mult: fixed multiplier. +- clocks: parent clock. + +Optional properties: +- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock +- reg: offset for the autoidle register of this clock +- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0 +- ti,set-rate-parent: clk_set_rate is propagated to parent + +Example: + clock { + compatible = "ti,fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + ti,clock-div = <2>; + ti,clock-mult = <1>; + }; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 640ebf9..f57fc4b 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,4 +1,4 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o dpll.o autoidle.o divider.o \ - composite.o + fixed-factor.o composite.o endif diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c new file mode 100644 index 0000000..e0549c6 --- /dev/null +++ b/drivers/clk/ti/fixed-factor.c @@ -0,0 +1,65 @@ +/* + * TI Fixed Factor Clock + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo <t-kristo@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk/ti.h> + +/** + * of_ti_fixed_factor_clk_setup() - Setup function for TI fixed factor clock + */ +static int __init of_ti_fixed_factor_clk_setup(struct device_node *node, + struct regmap *regmap) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent_name; + u32 div, mult; + u32 flags = 0; + + if (of_property_read_u32(node, "ti,clock-div", &div)) { + pr_err("%s Fixed factor clock <%s> must have a clock-div property\n", + __func__, node->name); + return -EINVAL; + } + + if (of_property_read_u32(node, "ti,clock-mult", &mult)) { + pr_err("%s Fixed factor clock <%s> must have a clokc-mult property\n", + __func__, node->name); + return -EINVAL; + } + + if (of_property_read_bool(node, "ti,set-rate-parent")) + flags |= CLK_SET_RATE_PARENT; + + parent_name = of_clk_get_parent_name(node, 0); + + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags, + mult, div); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return of_ti_autoidle_setup(node, regmap); + } + + return PTR_ERR(clk); +} +CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock", + of_ti_fixed_factor_clk_setup);
This behaves exactly in similar manner to basic fixed-factor-clock, but adds a few properties on top for handling clock hardware autoidling. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../bindings/clock/ti/fixed-factor-clock.txt | 29 +++++++++ drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/fixed-factor.c | 65 ++++++++++++++++++++ 3 files changed, 95 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt create mode 100644 drivers/clk/ti/fixed-factor.c