| Message ID | 1382716658-6964-13-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/25/2013 10:57 AM, Tero Kristo wrote: [...] > diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c > new file mode 100644 > index 0000000..1b3099e > --- /dev/null > +++ b/drivers/clk/ti/clockdomain.c > @@ -0,0 +1,58 @@ > +/* > + * OMAP clockdomain support > + * > + * Copyright (C) 2013 Texas Instruments, Inc. > + * > + * Tero Kristo <t-kristo@ti.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/clk/ti.h> > + > +static void __init of_ti_clockdomain_setup(struct device_node *node) > +{ > + struct clk *clk; > + struct clk_hw *clk_hw; > + const char *clkdm_name = node->name; > + int i; > + int num_clks; > + > + num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells"); > + > + for (i = 0; i < num_clks; i++) { > + clk = of_clk_get(node, i); > + if (__clk_get_flags(clk) & CLK_IS_BASIC) { > + pr_warn("%s: can't setup clkdm for basic clk %s\n", > + __func__, __clk_get_name(clk)); > + continue; > + } > + clk_hw = __clk_get_hw(clk); > + to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name; > + omap2_init_clk_clkdm(clk_hw); eventually, this can disappear ofcourse.. and that will pave way to remove the clock domain data to dts as well.. but yes, we have to find a proper home for this away from current location.. > + } > +} > + > +static struct of_device_id ti_clkdm_match_table[] __initdata = { > + { .compatible = "ti,clockdomain" }, > + { } > +}; > + > +void __init ti_dt_clockdomains_setup(void) since we are using of_clk_get, it will be good to provide documentation w.r.t when the call is expected to be invoked. > +{ > + struct device_node *np; > + for_each_matching_node(np, ti_clkdm_match_table) { > + of_ti_clockdomain_setup(np); > + } > +}
On 11/01/2013 10:22 PM, Nishanth Menon wrote: > On 10/25/2013 10:57 AM, Tero Kristo wrote: > [...] >> diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c >> new file mode 100644 >> index 0000000..1b3099e >> --- /dev/null >> +++ b/drivers/clk/ti/clockdomain.c >> @@ -0,0 +1,58 @@ >> +/* >> + * OMAP clockdomain support >> + * >> + * Copyright (C) 2013 Texas Instruments, Inc. >> + * >> + * Tero Kristo <t-kristo@ti.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any >> + * kind, whether express or implied; without even the implied warranty >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/slab.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/clk/ti.h> >> + >> +static void __init of_ti_clockdomain_setup(struct device_node *node) >> +{ >> + struct clk *clk; >> + struct clk_hw *clk_hw; >> + const char *clkdm_name = node->name; >> + int i; >> + int num_clks; >> + >> + num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells"); >> + >> + for (i = 0; i < num_clks; i++) { >> + clk = of_clk_get(node, i); >> + if (__clk_get_flags(clk) & CLK_IS_BASIC) { >> + pr_warn("%s: can't setup clkdm for basic clk %s\n", >> + __func__, __clk_get_name(clk)); >> + continue; >> + } >> + clk_hw = __clk_get_hw(clk); >> + to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name; >> + omap2_init_clk_clkdm(clk_hw); > > eventually, this can disappear ofcourse.. and that will pave way to > remove the clock domain data to dts as well.. but yes, we have to find > a proper home for this away from current location.. > >> + } >> +} >> + >> +static struct of_device_id ti_clkdm_match_table[] __initdata = { >> + { .compatible = "ti,clockdomain" }, >> + { } >> +}; >> + >> +void __init ti_dt_clockdomains_setup(void) > > since we are using of_clk_get, it will be good to provide > documentation w.r.t when the call is expected to be invoked. I'll add some kerneldoc here. -Tero > >> +{ >> + struct device_node *np; >> + for_each_matching_node(np, ti_clkdm_match_table) { >> + of_ti_clockdomain_setup(np); >> + } >> +} > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt new file mode 100644 index 0000000..45e6f7c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -0,0 +1,21 @@ +Binding for Texas Instruments clockdomain. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. Every clock on +TI SoC belongs to one clockdomain, but software only needs this +information for specific clocks which require their parent +clockdomain to be controlled when the clock is enabled/disabled. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,clockdomain" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of clocks within this domain + +Examples: + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 08b3360..8be0279 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -38,7 +38,6 @@ struct omap_clk { } struct clockdomain; -#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ static struct clk _name = { \ diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 7cba389..67056fb 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,4 +1,5 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o dpll.o autoidle.o divider.o \ - fixed-factor.o gate.o composite.o + fixed-factor.o gate.o clockdomain.o \ + composite.o endif diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c new file mode 100644 index 0000000..1b3099e --- /dev/null +++ b/drivers/clk/ti/clockdomain.c @@ -0,0 +1,58 @@ +/* + * OMAP clockdomain support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo <t-kristo@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk/ti.h> + +static void __init of_ti_clockdomain_setup(struct device_node *node) +{ + struct clk *clk; + struct clk_hw *clk_hw; + const char *clkdm_name = node->name; + int i; + int num_clks; + + num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells"); + + for (i = 0; i < num_clks; i++) { + clk = of_clk_get(node, i); + if (__clk_get_flags(clk) & CLK_IS_BASIC) { + pr_warn("%s: can't setup clkdm for basic clk %s\n", + __func__, __clk_get_name(clk)); + continue; + } + clk_hw = __clk_get_hw(clk); + to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name; + omap2_init_clk_clkdm(clk_hw); + } +} + +static struct of_device_id ti_clkdm_match_table[] __initdata = { + { .compatible = "ti,clockdomain" }, + { } +}; + +void __init ti_dt_clockdomains_setup(void) +{ + struct device_node *np; + for_each_matching_node(np, ti_clkdm_match_table) { + of_ti_clockdomain_setup(np); + } +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 29baca8..70446fb 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -190,6 +190,8 @@ struct ti_dt_clk { .node_name = name, \ } +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) + void omap2_init_clk_hw_omap_clocks(struct clk *clk); int omap3_noncore_dpll_enable(struct clk_hw *hw); void omap3_noncore_dpll_disable(struct clk_hw *hw); @@ -217,6 +219,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, struct regmap *regmap); +void ti_dt_clockdomains_setup(void); int of_ti_autoidle_setup(struct device_node *node, struct regmap *regmap); int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../devicetree/bindings/clock/ti/clockdomain.txt | 21 +++++++ arch/arm/mach-omap2/clock.h | 1 - drivers/clk/ti/Makefile | 3 +- drivers/clk/ti/clockdomain.c | 58 ++++++++++++++++++++ include/linux/clk/ti.h | 3 + 5 files changed, 84 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt create mode 100644 drivers/clk/ti/clockdomain.c