Message ID | 1373901928-19605-1-git-send-email-zubair.lutfullah@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
* Zubair Lutfullah <zubair.lutfullah@gmail.com> [130715 08:33]: > Did a grep for coordiante and replaced them all > with coordinate. > > This applies to the mfd-next tree. This should be safe to apply via the MFD tree as a non-critical fix assuming the bootloaders are not yet using this: Acked-by: Tony Lindgren <tony@atomide.com> > Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> > --- > .../bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++-- > arch/arm/boot/dts/am335x-evm.dts | 2 +- > drivers/input/touchscreen/ti_am335x_tsc.c | 2 +- > drivers/mfd/ti_am335x_tscadc.c | 2 +- > 4 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > index 491c97b..3e22aec 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > @@ -6,7 +6,7 @@ Required properties: > ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen > support on the platform. > ti,x-plate-resistance: X plate resistance > - ti,coordiante-readouts: The sequencer supports a total of 16 > + ti,coordinate-readouts: The sequencer supports a total of 16 > programmable steps each step is used to > read a single coordinate. A single > readout is enough but multiple reads can > @@ -34,7 +34,7 @@ Example: > tsc { > ti,wires = <4>; > ti,x-plate-resistance = <200>; > - ti,coordiante-readouts = <5>; > + ti,coordinate-readouts = <5>; > ti,wire-config = <0x00 0x11 0x22 0x33>; > }; > > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index 0fa4c7f..e50b781 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -250,7 +250,7 @@ > tsc { > ti,wires = <4>; > ti,x-plate-resistance = <200>; > - ti,coordiante-readouts = <5>; > + ti,coordinate-readouts = <5>; > ti,wire-config = <0x00 0x11 0x22 0x33>; > }; > > diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c > index 0e9f02a..6422f65 100644 > --- a/drivers/input/touchscreen/ti_am335x_tsc.c > +++ b/drivers/input/touchscreen/ti_am335x_tsc.c > @@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev, > if (err < 0) > return err; > > - err = of_property_read_u32(node, "ti,coordiante-readouts", > + err = of_property_read_u32(node, "ti,coordinate-readouts", > &ts_dev->coordinate_readouts); > if (err < 0) > return err; > diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c > index b003a16..dd31e23 100644 > --- a/drivers/mfd/ti_am335x_tscadc.c > +++ b/drivers/mfd/ti_am335x_tscadc.c > @@ -106,7 +106,7 @@ static int ti_tscadc_probe(struct platform_device *pdev) > > node = of_get_child_by_name(pdev->dev.of_node, "tsc"); > of_property_read_u32(node, "ti,wires", &tsc_wires); > - of_property_read_u32(node, "ti,coordiante-readouts", &readouts); > + of_property_read_u32(node, "ti,coordinate-readouts", &readouts); > > node = of_get_child_by_name(pdev->dev.of_node, "adc"); > of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) { > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2013-08-21 at 00:58 -0700, Tony Lindgren wrote: > * Zubair Lutfullah <zubair.lutfullah@gmail.com> [130715 08:33]: > > Did a grep for coordiante and replaced them all > > with coordinate. > > > > This applies to the mfd-next tree. > > This should be safe to apply via the MFD tree as a non-critical > fix assuming the bootloaders are not yet using this: > > Acked-by: Tony Lindgren <tony@atomide.com> It seems this didn't get applied. It fixes the touchscreen on a BeagleBone black with the 7" LCD and we should avoid having people use the wrong binding. Samuel or Lee: Could you take this patch? Thanks, Jan Lübbe
On Sat, 19 Oct 2013, Jan Lübbe wrote: > On Wed, 2013-08-21 at 00:58 -0700, Tony Lindgren wrote: > > * Zubair Lutfullah <zubair.lutfullah@gmail.com> [130715 08:33]: > > > Did a grep for coordiante and replaced them all > > > with coordinate. > > > > > > This applies to the mfd-next tree. > > > > This should be safe to apply via the MFD tree as a non-critical > > fix assuming the bootloaders are not yet using this: > > > > Acked-by: Tony Lindgren <tony@atomide.com> > > It seems this didn't get applied. It fixes the touchscreen on a > BeagleBone black with the 7" LCD and we should avoid having people use > the wrong binding. > > Samuel or Lee: Could you take this patch? This is the first time this patch has been sent to me. I need Dmitry's input (no pun intended) on how he's like to deal with this. At a bare minimum I'd like his Ack.
On Tue, 2013-10-22 at 10:05 +0100, Lee Jones wrote: > This is the first time this patch has been sent to me. > > I need Dmitry's input (no pun intended) on how he's like to deal with > this. At a bare minimum I'd like his Ack. Is there anything I can do to push this forward? The earlier we get the typo fixed in the documentation, the less chance that someone will use it that way. Regards, Jan
On Tue, 05 Nov 2013, Jan Lübbe wrote: > On Tue, 2013-10-22 at 10:05 +0100, Lee Jones wrote: > > This is the first time this patch has been sent to me. > > > > I need Dmitry's input (no pun intended) on how he's like to deal with > > this. At a bare minimum I'd like his Ack. > > Is there anything I can do to push this forward? The earlier we get the > typo fixed in the documentation, the less chance that someone will use > it that way. I think you should sent it again, but this time Cc the Device Tree list, Dmitry and myself when you submit.
On Tue, 2013-11-05 at 17:15 +0000, Lee Jones wrote: > On Tue, 05 Nov 2013, Jan Lübbe wrote: > > > On Tue, 2013-10-22 at 10:05 +0100, Lee Jones wrote: > > > This is the first time this patch has been sent to me. > > > > > > I need Dmitry's input (no pun intended) on how he's like to deal with > > > this. At a bare minimum I'd like his Ack. > > > > Is there anything I can do to push this forward? The earlier we get the > > typo fixed in the documentation, the less chance that someone will use > > it that way. > > I think you should sent it again, but this time Cc the Device Tree > list, Dmitry and myself when you submit. The original patch was not from me. But sure, I can resend it. Jan
On Tue, 05 Nov 2013, Jan Lübbe wrote: > On Tue, 2013-11-05 at 17:15 +0000, Lee Jones wrote: > > On Tue, 05 Nov 2013, Jan Lübbe wrote: > > > > > On Tue, 2013-10-22 at 10:05 +0100, Lee Jones wrote: > > > > This is the first time this patch has been sent to me. > > > > > > > > I need Dmitry's input (no pun intended) on how he's like to deal with > > > > this. At a bare minimum I'd like his Ack. > > > > > > Is there anything I can do to push this forward? The earlier we get the > > > typo fixed in the documentation, the less chance that someone will use > > > it that way. > > > > I think you should sent it again, but this time Cc the Device Tree > > list, Dmitry and myself when you submit. > > The original patch was not from me. But sure, I can resend it. I'm not worried about who re-sends the patch. Just make sure whoever does sends in correctly with regards to the $SUBJECT line etc. The one on this patch looks odd.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt index 491c97b..3e22aec 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -6,7 +6,7 @@ Required properties: ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen support on the platform. ti,x-plate-resistance: X plate resistance - ti,coordiante-readouts: The sequencer supports a total of 16 + ti,coordinate-readouts: The sequencer supports a total of 16 programmable steps each step is used to read a single coordinate. A single readout is enough but multiple reads can @@ -34,7 +34,7 @@ Example: tsc { ti,wires = <4>; ti,x-plate-resistance = <200>; - ti,coordiante-readouts = <5>; + ti,coordinate-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0fa4c7f..e50b781 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -250,7 +250,7 @@ tsc { ti,wires = <4>; ti,x-plate-resistance = <200>; - ti,coordiante-readouts = <5>; + ti,coordinate-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; }; diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 0e9f02a..6422f65 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev, if (err < 0) return err; - err = of_property_read_u32(node, "ti,coordiante-readouts", + err = of_property_read_u32(node, "ti,coordinate-readouts", &ts_dev->coordinate_readouts); if (err < 0) return err; diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index b003a16..dd31e23 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -106,7 +106,7 @@ static int ti_tscadc_probe(struct platform_device *pdev) node = of_get_child_by_name(pdev->dev.of_node, "tsc"); of_property_read_u32(node, "ti,wires", &tsc_wires); - of_property_read_u32(node, "ti,coordiante-readouts", &readouts); + of_property_read_u32(node, "ti,coordinate-readouts", &readouts); node = of_get_child_by_name(pdev->dev.of_node, "adc"); of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
Did a grep for coordiante and replaced them all with coordinate. This applies to the mfd-next tree. Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> --- .../bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++-- arch/arm/boot/dts/am335x-evm.dts | 2 +- drivers/input/touchscreen/ti_am335x_tsc.c | 2 +- drivers/mfd/ti_am335x_tscadc.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)