| Message ID | 1385403367-18144-8-git-send-email-matt.porter@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Monday 25 November 2013 11:46 PM, Matt Porter wrote: > Add a binding that describes the Broadcom Kona USB2 PHY found > on the BCM281xx family of SoCs. > > Signed-off-by: Matt Porter <matt.porter@linaro.org> > --- > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > new file mode 100644 > index 0000000..3dc8b3d > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt you should name this bcm-phy. Then you can add binding info of all (future) PHY IP from broadcom here. other than that this looks fine.. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Thanks Kishon
On Tue, Nov 26, 2013 at 04:01:05PM +0530, Kishon Vijay Abraham I wrote: > Hi, > > On Monday 25 November 2013 11:46 PM, Matt Porter wrote: > > Add a binding that describes the Broadcom Kona USB2 PHY found > > on the BCM281xx family of SoCs. > > > > Signed-off-by: Matt Porter <matt.porter@linaro.org> > > --- > > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > > > diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > new file mode 100644 > > index 0000000..3dc8b3d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > you should name this bcm-phy. Then you can add binding info of all (future) PHY > IP from broadcom here. > > other than that this looks fine.. Ok, sounds reasonable. I've noticed that convention with the TI USB bindings...I'll do the same. > Acked-by: Kishon Vijay Abraham I <kishon@ti.com> > > Thanks > Kishon
diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt new file mode 100644 index 0000000..3dc8b3d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + };
Add a binding that describes the Broadcom Kona USB2 PHY found on the BCM281xx family of SoCs. Signed-off-by: Matt Porter <matt.porter@linaro.org> --- .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt