| Message ID | 1385439472-23352-1-git-send-email-voice.shen@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2013/11/26 Bo Shen <voice.shen@atmel.com>: > As the priv is not assigned to card->drvdata, it is NULL, so when > unload module, it will cause NULL pointer oops. > Assign priv to card->drvdata to fix this issue. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > sound/soc/atmel/sam9x5_wm8731.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c > index 992ae38..6dc33ac 100644 > --- a/sound/soc/atmel/sam9x5_wm8731.c > +++ b/sound/soc/atmel/sam9x5_wm8731.c > @@ -99,6 +99,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) > > card->dev = &pdev->dev; > card->owner = THIS_MODULE; > + card->drvdata = priv; > card->dai_link = dai; > card->num_links = 1; > card->dapm_widgets = sam9x5_dapm_widgets; > -- > 1.7.9.5 > There's no oops any more ! Tested-by: Richard Genoud <richard.genoud@gmail.com> This should also go in -stable don't you think ? Maybe it's a bug on my kernel, but did you try to reload the module and play something ? On my board once I unload/reload it, there's no sound comming out (at least, it's better than a oops ! :) ) Richard.
On Tue, Nov 26, 2013 at 12:17:51PM +0800, Bo Shen wrote:
> + card->drvdata = priv;
You should use snd_soc_card_set_drvdata() for this.
Hi Richard, On 11/26/2013 07:32 PM, Richard Genoud wrote: > 2013/11/26 Bo Shen <voice.shen@atmel.com>: >> As the priv is not assigned to card->drvdata, it is NULL, so when >> unload module, it will cause NULL pointer oops. >> Assign priv to card->drvdata to fix this issue. >> >> Signed-off-by: Bo Shen <voice.shen@atmel.com> >> --- >> sound/soc/atmel/sam9x5_wm8731.c | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c >> index 992ae38..6dc33ac 100644 >> --- a/sound/soc/atmel/sam9x5_wm8731.c >> +++ b/sound/soc/atmel/sam9x5_wm8731.c >> @@ -99,6 +99,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) >> >> card->dev = &pdev->dev; >> card->owner = THIS_MODULE; >> + card->drvdata = priv; >> card->dai_link = dai; >> card->num_links = 1; >> card->dapm_widgets = sam9x5_dapm_widgets; >> -- >> 1.7.9.5 >> > There's no oops any more ! > > Tested-by: Richard Genoud <richard.genoud@gmail.com> > > This should also go in -stable don't you think ? After this patch go into mainline tree, I think we can ask it to go in -stable tree. > Maybe it's a bug on my kernel, but did you try to reload the module > and play something ? When we reload the module, as the codec is not configured outside, so it use default value, the 'Output Mixer HiFi Playback Switch' is in off state.If you want to play something, you need make it in on state. Please take the following command as a reference: --->8--- amixer cset numid=14,iface=MIXER,name='Output Mixer HiFi Playback Switch' on ---8<--- > On my board once I unload/reload it, there's no sound comming out > (at least, it's better than a oops ! :) ) > > Richard. > Best Regards, Bo Shen
Hi Mark, On 11/26/2013 09:22 PM, Mark Brown wrote: > On Tue, Nov 26, 2013 at 12:17:51PM +0800, Bo Shen wrote: > >> + card->drvdata = priv; > > You should use snd_soc_card_set_drvdata() for this. OK, I will change to use snd_soc_card_set_drvdata() for this. Thanks. Best Regards, Bo Shen
On 27/11/2013 02:13, Bo Shen wrote: > Hi Richard, Hi ! > > On 11/26/2013 07:32 PM, Richard Genoud wrote: >> 2013/11/26 Bo Shen <voice.shen@atmel.com>: >>> As the priv is not assigned to card->drvdata, it is NULL, so when >>> unload module, it will cause NULL pointer oops. >>> Assign priv to card->drvdata to fix this issue. >>> >>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>> --- >>> sound/soc/atmel/sam9x5_wm8731.c | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/sound/soc/atmel/sam9x5_wm8731.c >>> b/sound/soc/atmel/sam9x5_wm8731.c >>> index 992ae38..6dc33ac 100644 >>> --- a/sound/soc/atmel/sam9x5_wm8731.c >>> +++ b/sound/soc/atmel/sam9x5_wm8731.c >>> @@ -99,6 +99,7 @@ static int sam9x5_wm8731_driver_probe(struct >>> platform_device *pdev) >>> >>> card->dev = &pdev->dev; >>> card->owner = THIS_MODULE; >>> + card->drvdata = priv; >>> card->dai_link = dai; >>> card->num_links = 1; >>> card->dapm_widgets = sam9x5_dapm_widgets; >>> -- >>> 1.7.9.5 >>> >> There's no oops any more ! >> >> Tested-by: Richard Genoud <richard.genoud@gmail.com> >> >> This should also go in -stable don't you think ? > > After this patch go into mainline tree, I think we can ask it to go in > -stable tree. So, you should add "Cc: stable@vger.kernel.org" just after your signed-off (maybe with a note that it applies on 3.12+) [ actually, that's more a question than an advice :) ] > >> Maybe it's a bug on my kernel, but did you try to reload the module >> and play something ? > > When we reload the module, as the codec is not configured outside, so it > use default value, the 'Output Mixer HiFi Playback Switch' is in off > state.If you want to play something, you need make it in on state. > Please take the following command as a reference: > --->8--- > amixer cset numid=14,iface=MIXER,name='Output Mixer HiFi Playback > Switch' on > ---8<--- It doesn't seems to be related to the playback switches. I check the TK/TD/TF lines, and nothing happens on them after the module has been unloaded/reloaded. I enabled I2C/dma logs (on a 3.13-rc1 + your 2 patches kernel + at91sam9g35ek) and it seems that the DMA doesn't fill the SSC : # # before unloading the module : # alsactl -f /etc/asound.state restore # aplay tone-stereo-100Hz_right-440Hz-left.wav -Dplug:default Playing WAVE 'tone-stereo-100Hz_right-440Hz-left.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x10, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xe, to go 1 at91_i2c f8010000.i2c: wrote 0x42, to go 0 at91_i2c f8010000.i2c: transfer complete dma dma0chan4: atc_control (3) i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x5f, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x12, to go 1 at91_i2c f8010000.i2c: wrote 0x1, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x57, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x47, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xa, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete dma dma0chan4: prep_dma_cyclic: TO DEVICE buf@0x27b30000 - 8 (65536/8192) dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: tx_submit: started 2 dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0000 dma dma0chan4: channel: s0x0 d0x0 ctrl0x0:0x0 cfg0x100022dd l0x0 dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0010 dma dma0chan4: channel: s0x27b30418 d0xf0010024 ctrl0x1100020c:0x20200010 cfg0x100022dd l0x27981d5c dma dma0chan4: issue_pending at_hdmac ffffec00.dma-controller: interrupt: status = 0x00000010, 0x00ff00ff, 0x00000010 dma dma0chan4: new cyclic period llp 0x27981da8 at_hdmac ffffec00.dma-controller: interrupt: status = 0x00000010, 0x00ff00ff, 0x00000010 dma dma0chan4: new cyclic period llp 0x27981df4 [...] at_hdmac ffffec00.dma-controller: interrupt: status = 0x00000010, 0x00ff00ff, 0x00000010 dma dma0chan4: new cyclic period llp 0x27981ed8 at_hdmac ffffec00.dma-controller: interrupt: status = 0x00000010, 0x00ff00ff, 0x00000010 dma dma0chan4: new cyclic period llp 0x27981f24 at_hdmac ffffec00.dma-controller: interrupt: status = 0x00000010, 0x00ff00ff, 0x00000010 dma dma0chan4: new cyclic period llp 0x27981d10 dma dma0chan4: atc_control (0) dma dma0chan4: descriptor 2 complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xa, to go 1 at91_i2c f8010000.i2c: wrote 0x8, to go 0 at91_i2c f8010000.i2c: transfer complete # # # unloading the module # rmmod snd_soc_sam9x5_wm8731i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x57, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x5f, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x7f, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x12, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xc, to go 1 at91_i2c f8010000.i2c: wrote 0x7f, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xff, to go 1 at91_i2c f8010000.i2c: wrote 0xff, to go 0 at91_i2c f8010000.i2c: transfer complete dma dma0chan4: free_chan_resources: (descs allocated=64) dma dma0chan4: freeing descriptor c885dd10 dma dma0chan4: freeing descriptor c885dd5c dma dma0chan4: freeing descriptor c885dda8 dma dma0chan4: freeing descriptor c885ddf4 [...] dma dma0chan4: freeing descriptor c888bed8 dma dma0chan4: freeing descriptor c888bf24 dma dma0chan4: freeing descriptor c888bf70 dma dma0chan4: freeing descriptor c888d000 dma dma0chan4: freeing descriptor c888d04c dma dma0chan4: free_chan_resources: done dma dma0chan5: free_chan_resources: (descs allocated=64) dma dma0chan5: freeing descriptor c888d098 dma dma0chan5: freeing descriptor c888d0e4 dma dma0chan5: freeing descriptor c888d130 [...] dma dma0chan5: freeing descriptor c888f2ac dma dma0chan5: freeing descriptor c888f2f8 dma dma0chan5: freeing descriptor c888f344 dma dma0chan5: freeing descriptor c888f390 dma dma0chan5: free_chan_resources: done # # reloading the module # modprobe snd_soc_sam9x5_wm8731 dmaengine: private_candidate: dma0chan0 busy dmaengine: private_candidate: dma0chan1 busy dmaengine: private_candidate: dma0chan2 busy dmaengine: private_candidate: dma0chan3 busy dma dma0chan4: alloc_chan_resources dma dma0chan4: alloc_chan_resources: allocated 64 descriptors dmaengine: __dma_request_channel: success (dma0chan4) dmaengine: private_candidate: dma0chan0 busy dmaengine: private_candidate: dma0chan1 busy dmaengine: private_candidate: dma0chan2 busy dmaengine: private_candidate: dma0chan3 busy dmaengine: private_candidate: dma0chan4 busy dma dma0chan5: alloc_chan_resources dma dma0chan5: alloc_chan_resources: allocated 64 descriptors dmaengine: __dma_request_channel: success (dma0chan5) i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x1e, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x0, to go 1 at91_i2c f8010000.i2c: wrote 0x9a, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x2, to go 1 at91_i2c f8010000.i2c: wrote 0x9a, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x4, to go 1 at91_i2c f8010000.i2c: wrote 0x74, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x6, to go 1 at91_i2c f8010000.i2c: wrote 0x74, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x8, to go 1 at91_i2c f8010000.i2c: wrote 0x12, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xff, to go 1 at91_i2c f8010000.i2c: wrote 0xff, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xe, to go 1 at91_i2c f8010000.i2c: wrote 0x42, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x1e, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xff, to go 1 at91_i2c f8010000.i2c: wrote 0x7f, to go 0 at91_i2c f8010000.i2c: transfer complete sam9x5-snd-wm8731 sound.5: wm8731-hifi <-> f0010000.ssc mapping ok i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xe, to go 1 at91_i2c f8010000.i2c: wrote 0x42, to go 0 at91_i2c f8010000.i2c: transfer complete # # restoring codec state # alsactl -f /etc/asound.state restore # aplay tone-stereo-100Hz_right-440Hz-left.wav -Dplug:default Playing WAVE 'tone-stereo-100Hz_right-440Hz-left.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x10, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xe, to go 1 at91_i2c f8010000.i2c: wrote 0x42, to go 0 at91_i2c f8010000.i2c: transfer complete dma dma0chan4: atc_control (3) i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xff, to go 1 at91_i2c f8010000.i2c: wrote 0x5f, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0x12, to go 1 at91_i2c f8010000.i2c: wrote 0x1, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xff, to go 1 at91_i2c f8010000.i2c: wrote 0x57, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xff, to go 1 at91_i2c f8010000.i2c: wrote 0x47, to go 0 at91_i2c f8010000.i2c: transfer complete i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: at91_xfer: processing 1 messages: at91_i2c f8010000.i2c: transfer: write 2 bytes. at91_i2c f8010000.i2c: wrote 0xa, to go 1 at91_i2c f8010000.i2c: wrote 0x0, to go 0 at91_i2c f8010000.i2c: transfer complete dma dma0chan4: prep_dma_cyclic: TO DEVICE buf@0x27950000 - 8 (65536/8192) dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: scanned 1 descriptors on freelist dma dma0chan4: tx_submit: started 2 dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0000 dma dma0chan4: channel: s0x27b3eb20 d0xf0010024 ctrl0x91000590:0x20200010 cfg0x100022dd l0x27981d10 dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0010 dma dma0chan4: channel: s0x27950010 d0xf0010024 ctrl0x11000008:0x20200010 cfg0x100022dd l0x27a58344 dma dma0chan4: issue_pending [ blocks here forever (or at least a looooong time) ] Anyway, this should not prevent this patch from being mainlined :)
Hi Richard, On 11/27/2013 06:09 PM, Richard Genoud wrote: [Snip] > dma dma0chan4: prep_dma_cyclic: TO DEVICE buf@0x27950000 - 8 (65536/8192) > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: scanned 1 descriptors on freelist > dma dma0chan4: tx_submit: started 2 > dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0000 > dma dma0chan4: channel: s0x27b3eb20 d0xf0010024 ctrl0x91000590:0x20200010 cfg0x100022dd l0x27981d10 > dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0010 > dma dma0chan4: channel: s0x27950010 d0xf0010024 ctrl0x11000008:0x20200010 cfg0x100022dd l0x27a58344 > dma dma0chan4: issue_pending > [ blocks here forever (or at least a looooong time) ] How can I reproduce this issue? Please help provide detail information about your operation. On my side, I just do: --->8--- while true; do insmod snd-soc-atmel-pcm-dma.ko && insmod snd-soc-atmel_ssc_dai.ko && insmod snd-soc-wm8731.ko && insmod snd-soc-sam9x5-wm8731.ko; amixer cset numid=14,iface=MIXER,name='Output Mixer HiFi Playback Switch' on; aplay sample.wav; rmmod snd-soc-sam9x5-wm8731.ko && rmmod snd-soc-wm8731.ko && rmmod snd-soc-atmel_ssc_dai.ko && rmmod snd-soc-atmel-pcm-dma.ko; done ---8<--- It works well on my side on at91sam9g35ek board, based on v3.13-rc1 Best Regards, Bo Shen
Hi, On 28/11/2013 02:20, Bo Shen wrote: > Hi Richard, > > On 11/27/2013 06:09 PM, Richard Genoud wrote: > > [Snip] > >> dma dma0chan4: prep_dma_cyclic: TO DEVICE buf@0x27950000 - 8 (65536/8192) >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: scanned 1 descriptors on freelist >> dma dma0chan4: tx_submit: started 2 >> dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0000 >> dma dma0chan4: channel: s0x27b3eb20 d0xf0010024 >> ctrl0x91000590:0x20200010 cfg0x100022dd l0x27981d10 >> dma dma0chan4: channel 4 : imr = 0xff00ff, chsr = 0xff0010 >> dma dma0chan4: channel: s0x27950010 d0xf0010024 >> ctrl0x11000008:0x20200010 cfg0x100022dd l0x27a58344 >> dma dma0chan4: issue_pending >> [ blocks here forever (or at least a looooong time) ] > > How can I reproduce this issue? Please help provide detail information > about your operation. > > On my side, I just do: > --->8--- > while true; > do > insmod snd-soc-atmel-pcm-dma.ko && insmod snd-soc-atmel_ssc_dai.ko > && insmod snd-soc-wm8731.ko && insmod snd-soc-sam9x5-wm8731.ko; > amixer cset numid=14,iface=MIXER,name='Output Mixer HiFi Playback > Switch' on; > aplay sample.wav; > rmmod snd-soc-sam9x5-wm8731.ko && rmmod snd-soc-wm8731.ko && rmmod > snd-soc-atmel_ssc_dai.ko && rmmod snd-soc-atmel-pcm-dma.ko; > done > ---8<--- > > It works well on my side on at91sam9g35ek board, based on v3.13-rc1 Ok, it's working with your script. I was doing: modprobe snd-soc-wm8731 modprobe snd-soc-sam9x5-wm8731 amixer cset numid=14,iface=MIXER,name='Output Mixer HiFi Playback Switch' on aplay sample.wav # works ok rmmod snd-soc-sam9x5-wm8731 insmod /lib/modules/3.13.0-rc1/kernel/sound/soc/atmel/snd-soc-sam9x5-wm8731.ko amixer cset numid=14,iface=MIXER,name='Output Mixer HiFi Playback Switch' on aplay sample.wav # error aplay: pcm_write:1737: write error: Input/output error => I wasn't unloading snd-soc-wm8731 Thanks for your time ! Richard.
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 992ae38..6dc33ac 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -99,6 +99,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) card->dev = &pdev->dev; card->owner = THIS_MODULE; + card->drvdata = priv; card->dai_link = dai; card->num_links = 1; card->dapm_widgets = sam9x5_dapm_widgets;
As the priv is not assigned to card->drvdata, it is NULL, so when unload module, it will cause NULL pointer oops. Assign priv to card->drvdata to fix this issue. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- sound/soc/atmel/sam9x5_wm8731.c | 1 + 1 file changed, 1 insertion(+)