diff mbox

[RFC,part1,7/7] ARM64 / ACPI: Enable ARM64 in Kconfig

Message ID 1386088611-2801-8-git-send-email-hanjun.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Hanjun Guo Dec. 3, 2013, 4:36 p.m. UTC 
Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.

acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
depends on X86 || IA64, and implement it on ARM in the furture.

In order to make arm-core.c can both run on ARM and ARM64, introduce
CONFIG_ACPI_ARM to support it.

Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 arch/arm64/Kconfig         |    2 ++
 drivers/acpi/Kconfig       |   12 +++++++++---
 drivers/acpi/plat/Makefile |    2 +-
 3 files changed, 12 insertions(+), 4 deletions(-)

Comments

Graeme Gregory Dec. 4, 2013, 10:10 a.m. UTC | #1 
On Wed, Dec 04, 2013 at 12:36:51AM +0800, Hanjun Guo wrote:
> Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.
> 
> acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
> depends on X86 || IA64, and implement it on ARM in the furture.
> 
> In order to make arm-core.c can both run on ARM and ARM64, introduce
> CONFIG_ACPI_ARM to support it.
> 
> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
> Signed-off-by: Al Stone <al.stone@linaro.org>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
>  arch/arm64/Kconfig         |    2 ++
>  drivers/acpi/Kconfig       |   12 +++++++++---
>  drivers/acpi/plat/Makefile |    2 +-
>  3 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 88c8b6c1..a37795f 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -280,6 +280,8 @@ source "net/Kconfig"
>  
>  source "drivers/Kconfig"
>  
> +source "drivers/acpi/Kconfig"
> +
>  source "fs/Kconfig"
>  
>  source "arch/arm64/kvm/Kconfig"
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 53f0f16..f43485e 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -2,13 +2,17 @@
>  # ACPI Configuration
>  #
>  
> +config ACPI_ARM
> +	bool
> +	select ACPI_REDUCED_HARDWARE
> +
>  menuconfig ACPI
>  	bool "ACPI (Advanced Configuration and Power Interface) Support"
>  	depends on !IA64_HP_SIM
> -	depends on IA64 || X86
> -	depends on PCI
> +	depends on ((IA64 || X86) && PCI) || ARM64
>  	select PNP
> -	default y
> +	select ACPI_ARM if (ARM || ARM64)
> +	default y if !(ARM || ARM64)

Should only be ARM64 here with the current files in this series, I think
this is causing others confusion looking for arm 32bit support in patches
where there is none yet!

>  	help
>  	  Advanced Configuration and Power Interface (ACPI) support for 
>  	  Linux requires an ACPI-compliant platform (hardware/firmware),
> @@ -149,6 +153,7 @@ config ACPI_PROCESSOR
>  	tristate "Processor"
>  	select THERMAL
>  	select CPU_IDLE
> +	depends on X86 || IA64
>  	default y
>  	help
>  	  This driver installs ACPI as the idle handler for Linux and uses
> @@ -250,6 +255,7 @@ config ACPI_DEBUG
>  config ACPI_PCI_SLOT
>  	bool "PCI slot detection driver"
>  	depends on SYSFS
> +	depends on PCI
>  	default n
>  	help
>  	  This driver creates entries in /sys/bus/pci/slots/ for all PCI
> diff --git a/drivers/acpi/plat/Makefile b/drivers/acpi/plat/Makefile
> index 46bc65e..3a61176 100644
> --- a/drivers/acpi/plat/Makefile
> +++ b/drivers/acpi/plat/Makefile
> @@ -1 +1 @@
> -obj-$(CONFIG_ARM64)	+= arm-core.o
> +obj-$(CONFIG_ACPI_ARM)	+= arm-core.o
> -- 
> 1.7.9.5
>
Hanjun Guo Dec. 4, 2013, 3:55 p.m. UTC | #2 
On 2013?12?04? 18:10, Graeme Gregory wrote:
> On Wed, Dec 04, 2013 at 12:36:51AM +0800, Hanjun Guo wrote:
>> Add Kconfigs to build ACPI on ARM64, and make ACPI runable on ARM64.
>>
>> acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
>> depends on X86 || IA64, and implement it on ARM in the furture.
>>
>> In order to make arm-core.c can both run on ARM and ARM64, introduce
>> CONFIG_ACPI_ARM to support it.
>>
>> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
>> Signed-off-by: Al Stone <al.stone@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> ---
>>   arch/arm64/Kconfig         |    2 ++
>>   drivers/acpi/Kconfig       |   12 +++++++++---
>>   drivers/acpi/plat/Makefile |    2 +-
>>   3 files changed, 12 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 88c8b6c1..a37795f 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -280,6 +280,8 @@ source "net/Kconfig"
>>   
>>   source "drivers/Kconfig"
>>   
>> +source "drivers/acpi/Kconfig"
>> +
>>   source "fs/Kconfig"
>>   
>>   source "arch/arm64/kvm/Kconfig"
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index 53f0f16..f43485e 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -2,13 +2,17 @@
>>   # ACPI Configuration
>>   #
>>   
>> +config ACPI_ARM
>> +	bool
>> +	select ACPI_REDUCED_HARDWARE
>> +
>>   menuconfig ACPI
>>   	bool "ACPI (Advanced Configuration and Power Interface) Support"
>>   	depends on !IA64_HP_SIM
>> -	depends on IA64 || X86
>> -	depends on PCI
>> +	depends on ((IA64 || X86) && PCI) || ARM64
>>   	select PNP
>> -	default y
>> +	select ACPI_ARM if (ARM || ARM64)
>> +	default y if !(ARM || ARM64)
> Should only be ARM64 here with the current files in this series, I think
> this is causing others confusion looking for arm 32bit support in patches
> where there is none yet!

ah, yes, my bad, will update it in next version.

Thanks
Hanjun
diff mbox

Patch

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 88c8b6c1..a37795f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -280,6 +280,8 @@  source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/acpi/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 53f0f16..f43485e 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -2,13 +2,17 @@ 
 # ACPI Configuration
 #
 
+config ACPI_ARM
+	bool
+	select ACPI_REDUCED_HARDWARE
+
 menuconfig ACPI
 	bool "ACPI (Advanced Configuration and Power Interface) Support"
 	depends on !IA64_HP_SIM
-	depends on IA64 || X86
-	depends on PCI
+	depends on ((IA64 || X86) && PCI) || ARM64
 	select PNP
-	default y
+	select ACPI_ARM if (ARM || ARM64)
+	default y if !(ARM || ARM64)
 	help
 	  Advanced Configuration and Power Interface (ACPI) support for 
 	  Linux requires an ACPI-compliant platform (hardware/firmware),
@@ -149,6 +153,7 @@  config ACPI_PROCESSOR
 	tristate "Processor"
 	select THERMAL
 	select CPU_IDLE
+	depends on X86 || IA64
 	default y
 	help
 	  This driver installs ACPI as the idle handler for Linux and uses
@@ -250,6 +255,7 @@  config ACPI_DEBUG
 config ACPI_PCI_SLOT
 	bool "PCI slot detection driver"
 	depends on SYSFS
+	depends on PCI
 	default n
 	help
 	  This driver creates entries in /sys/bus/pci/slots/ for all PCI
diff --git a/drivers/acpi/plat/Makefile b/drivers/acpi/plat/Makefile
index 46bc65e..3a61176 100644
--- a/drivers/acpi/plat/Makefile
+++ b/drivers/acpi/plat/Makefile
@@ -1 +1 @@ 
-obj-$(CONFIG_ARM64)	+= arm-core.o
+obj-$(CONFIG_ACPI_ARM)	+= arm-core.o