diff mbox

ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order

Message ID 1386596612-26818-1-git-send-email-nicolas.ferre@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Nicolas Ferre Dec. 9, 2013, 1:43 p.m. UTC
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/boot/dts/at91rm9200ek.dts | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

Comments

Boris BREZILLON Dec. 9, 2013, 2:05 p.m. UTC | #1
On 09/12/2013 14:43, Nicolas Ferre wrote:
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON<b.brezillon@overkiz.com>
> ---
>   arch/arm/boot/dts/at91rm9200ek.dts | 30 +++++++++++++++---------------
>   1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
> index 31f5c3293d07..df6b0aa0e4dd 100644
> --- a/arch/arm/boot/dts/at91rm9200ek.dts
> +++ b/arch/arm/boot/dts/at91rm9200ek.dts
> @@ -29,18 +29,9 @@
>   
>   	ahb {
>   		apb {
> -			dbgu: serial@fffff200 {
> -				status = "okay";
> -			};
> -
> -			usart1: serial@fffc4000 {
> -				pinctrl-0 =
> -						<&pinctrl_uart1
> -						 &pinctrl_uart1_rts
> -						 &pinctrl_uart1_cts
> -						 &pinctrl_uart1_dtr_dsr
> -						 &pinctrl_uart1_dcd
> -						 &pinctrl_uart1_ri>;
> +			usb1: gadget@fffb0000 {
> +				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
> +				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
>   				status = "okay";
>   			};
>   
> @@ -54,9 +45,14 @@
>   				};
>   			};
>   
> -			usb1: gadget@fffb0000 {
> -				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
> -				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
> +			usart1: serial@fffc4000 {
> +				pinctrl-0 =
> +						<&pinctrl_uart1
> +						 &pinctrl_uart1_rts
> +						 &pinctrl_uart1_cts
> +						 &pinctrl_uart1_dtr_dsr
> +						 &pinctrl_uart1_dcd
> +						 &pinctrl_uart1_ri>;
>   				status = "okay";
>   			};
>   
> @@ -69,6 +65,10 @@
>   					reg = <0>;
>   				};
>   			};
> +
> +			dbgu: serial@fffff200 {
> +				status = "okay";
> +			};
>   		};
>   
>   		usb0: ohci@00300000 {
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 31f5c3293d07..df6b0aa0e4dd 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -29,18 +29,9 @@ 
 
 	ahb {
 		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart1: serial@fffc4000 {
-				pinctrl-0 =
-						<&pinctrl_uart1
-						 &pinctrl_uart1_rts
-						 &pinctrl_uart1_cts
-						 &pinctrl_uart1_dtr_dsr
-						 &pinctrl_uart1_dcd
-						 &pinctrl_uart1_ri>;
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -54,9 +45,14 @@ 
 				};
 			};
 
-			usb1: gadget@fffb0000 {
-				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
-				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			usart1: serial@fffc4000 {
+				pinctrl-0 =
+						<&pinctrl_uart1
+						 &pinctrl_uart1_rts
+						 &pinctrl_uart1_cts
+						 &pinctrl_uart1_dtr_dsr
+						 &pinctrl_uart1_dcd
+						 &pinctrl_uart1_ri>;
 				status = "okay";
 			};
 
@@ -69,6 +65,10 @@ 
 					reg = <0>;
 				};
 			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00300000 {