| Message ID | 1386271244-3927-2-git-send-email-tim.kryger@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Applied to armsoc/for-3.14/dt thanks, csd On Thu, Dec 5, 2013 at 11:20 AM, Tim Kryger <tim.kryger@linaro.org> wrote: > Declare clocks that are enabled and configured by bootloaders as fixed > rate clocks in the DTS such that device drivers may use standard clock > function calls. > > Signed-off-by: Tim Kryger <tim.kryger@linaro.org> > Reviewed-by: Markus Mayer <markus.mayer@linaro.org> > Reviewed-by: Matt Porter <matt.porter@linaro.org> > --- > arch/arm/boot/dts/bcm11351.dtsi | 97 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 97 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi > index b0c0610..eca6fbc 100644 > --- a/arch/arm/boot/dts/bcm11351.dtsi > +++ b/arch/arm/boot/dts/bcm11351.dtsi > @@ -142,4 +142,101 @@ > status = "disabled"; > }; > > + clocks { > + bsc1_clk: bsc1 { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + bsc2_clk: bsc2 { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + bsc3_clk: bsc3 { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + pmu_bsc_clk: pmu_bsc { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + hub_timer_clk: hub_timer { > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + #clock-cells = <0>; > + }; > + > + pwm_clk: pwm { > + compatible = "fixed-clock"; > + clock-frequency = <26000000>; > + #clock-cells = <0>; > + }; > + > + sdio1_clk: sdio1 { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + #clock-cells = <0>; > + }; > + > + sdio2_clk: sdio2 { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + #clock-cells = <0>; > + }; > + > + sdio3_clk: sdio3 { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + #clock-cells = <0>; > + }; > + > + sdio4_clk: sdio4 { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + #clock-cells = <0>; > + }; > + > + tmon_1m_clk: tmon_1m { > + compatible = "fixed-clock"; > + clock-frequency = <1000000>; > + #clock-cells = <0>; > + }; > + > + uartb_clk: uartb { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + uartb2_clk: uartb2 { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + uartb3_clk: uartb3 { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + uartb4_clk: uartb4 { > + compatible = "fixed-clock"; > + clock-frequency = <13000000>; > + #clock-cells = <0>; > + }; > + > + usb_otg_ahb_clk: usb_otg_ahb { > + compatible = "fixed-clock"; > + clock-frequency = <52000000>; > + #clock-cells = <0>; > + }; > + }; > }; > -- > 1.8.0.1 >
On Mon, Dec 9, 2013 at 11:18 PM, Christian Daudt <bcm@fixthebug.org> wrote:
> Applied to armsoc/for-3.14/dt
Could you wait till other maintainers provide their acks and then take
the entire series into a branch that feeds into the arm-soc
drivers-for-linus branch?
Thanks,
Tim Kryger
On Tue, Dec 10, 2013 at 12:26 PM, Tim Kryger <tim.kryger@linaro.org> wrote: > On Mon, Dec 9, 2013 at 11:18 PM, Christian Daudt <bcm@fixthebug.org> wrote: >> Applied to armsoc/for-3.14/dt > > Could you wait till other maintainers provide their acks and then take > the entire series into a branch that feeds into the arm-soc > drivers-for-linus branch? > > Thanks, > Tim Kryger I'll try to sync with other maintainers to pull it in together. I'll leave this commit in as-is for now as it is harmless on its own. I'll back it off before 3.14 merge if it poses a problem.
On Thu, Dec 12, 2013 at 11:48 PM, Christian Daudt <bcm@fixthebug.org> wrote: > I'll try to sync with other maintainers to pull it in together. I'll > leave this commit in as-is for now as it is harmless on its own. I'll > back it off before 3.14 merge if it poses a problem. Sounds great. Thank you.
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index b0c0610..eca6fbc 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -142,4 +142,101 @@ status = "disabled"; }; + clocks { + bsc1_clk: bsc1 { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + bsc2_clk: bsc2 { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + bsc3_clk: bsc3 { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + pmu_bsc_clk: pmu_bsc { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + hub_timer_clk: hub_timer { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + pwm_clk: pwm { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + sdio1_clk: sdio1 { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + sdio2_clk: sdio2 { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + sdio3_clk: sdio3 { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + sdio4_clk: sdio4 { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + tmon_1m_clk: tmon_1m { + compatible = "fixed-clock"; + clock-frequency = <1000000>; + #clock-cells = <0>; + }; + + uartb_clk: uartb { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + uartb2_clk: uartb2 { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + uartb3_clk: uartb3 { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + uartb4_clk: uartb4 { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + compatible = "fixed-clock"; + clock-frequency = <52000000>; + #clock-cells = <0>; + }; + }; };