| Message ID | 1386271244-3927-3-git-send-email-tim.kryger@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 5, 2013 at 11:20 AM, Tim Kryger <tim.kryger@linaro.org> wrote: > The frequency property in "snps,dw-apb-uart" entries are no longer > required if the rate of the external clock can be determined using the > clk api (see e302cd9 serial: 8250_dw: add support for clk api). > > This patch replaces the frequency property in the UART nodes of > bcm11351.dtsi with references to the relevant clocks following the > common clock binding. > > Signed-off-by: Tim Kryger <tim.kryger@linaro.org> > Reviewed-by: Markus Mayer <markus.mayer@linaro.org> > Reviewed-by: Matt Porter <matt.porter@linaro.org> > --- > arch/arm/boot/dts/bcm11351.dtsi | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi > index eca6fbc..9b99c52 100644 > --- a/arch/arm/boot/dts/bcm11351.dtsi > +++ b/arch/arm/boot/dts/bcm11351.dtsi > @@ -43,7 +43,7 @@ > compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; > status = "disabled"; > reg = <0x3e000000 0x1000>; > - clock-frequency = <13000000>; > + clocks = <&uartb_clk>; > interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > @@ -53,7 +53,7 @@ > compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; > status = "disabled"; > reg = <0x3e001000 0x1000>; > - clock-frequency = <13000000>; > + clocks = <&uartb2_clk>; > interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > @@ -63,7 +63,7 @@ > compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; > status = "disabled"; > reg = <0x3e002000 0x1000>; > - clock-frequency = <13000000>; > + clocks = <&uartb3_clk>; > interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > @@ -73,7 +73,7 @@ > compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; > status = "disabled"; > reg = <0x3e003000 0x1000>; > - clock-frequency = <13000000>; > + clocks = <&uartb4_clk>; > interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > reg-shift = <2>; > reg-io-width = <4>; > -- > 1.8.0.1 > Reviewed-by: Christian Daudt <bcm@fixthebug.org>
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index eca6fbc..9b99c52 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -43,7 +43,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb_clk>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +53,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb2_clk>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +63,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb3_clk>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -73,7 +73,7 @@ compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e003000 0x1000>; - clock-frequency = <13000000>; + clocks = <&uartb4_clk>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>;