| Message ID | 1387450064-6598-3-git-send-email-jonas.jensen@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 19, 2013 at 8:47 PM, Jonas Jensen <jonas.jensen@gmail.com> wrote: > Add a generic (dtsi) include file for MOXA ART SoCs. > > Also add a file for UC-7112-LX. > > Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> P.S. you could have added this already, small changes don't require a RB droppage. Regards, Peter > --- > Documentation/devicetree/bindings/arm/moxart.txt | 12 ++ > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/moxart-uc7112lx.dts | 117 ++++++++++++++++++ > arch/arm/boot/dts/moxart.dtsi | 148 +++++++++++++++++++++++ > 4 files changed, 278 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt > create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts > create mode 100644 arch/arm/boot/dts/moxart.dtsi > > diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt > new file mode 100644 > index 0000000..11087ed > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/moxart.txt > @@ -0,0 +1,12 @@ > +MOXA ART device tree bindings > + > +Boards with the MOXA ART SoC shall have the following properties: > + > +Required root node property: > + > +compatible = "moxa,moxart"; > + > +Boards: > + > +- UC-7112-LX: embedded computer > + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 40e13e3..99a730f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ > kirkwood-ts219-6281.dtb \ > kirkwood-ts219-6282.dtb > dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb > +dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb > dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ > qcom-msm8960-cdp.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ > diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts > new file mode 100644 > index 0000000..10d088d > --- /dev/null > +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts > @@ -0,0 +1,117 @@ > +/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX > + * > + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> > + * > + * Licensed under GPLv2 or later. > + */ > + > +/dts-v1/; > +/include/ "moxart.dtsi" > + > +/ { > + model = "MOXA UC-7112-LX"; > + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"; > + > + memory { > + device_type = "memory"; > + reg = <0x0 0x2000000>; > + }; > + > + clocks { > + ref12: ref12M { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12000000>; > + }; > + }; > + > + flash@80000000,0 { > + compatible = "numonyx,js28f128", "cfi-flash"; > + reg = <0x80000000 0x1000000>; > + bank-width = <2>; > + #address-cells = <1>; > + #size-cells = <1>; > + partition@0 { > + label = "bootloader"; > + reg = <0x0 0x40000>; > + }; > + partition@40000 { > + label = "linux kernel"; > + reg = <0x40000 0x1C0000>; > + }; > + partition@200000 { > + label = "root filesystem"; > + reg = <0x200000 0x800000>; > + }; > + partition@a00000 { > + label = "user filesystem"; > + reg = <0xa00000 0x600000>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + user-led { > + label = "ready-led"; > + gpios = <&gpio 27 0x1>; > + default-state = "on"; > + linux,default-trigger = "default-on"; > + }; > + }; > + > + gpio_keys_polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <500>; > + button@25 { > + label = "GPIO Reset"; > + linux,code = <116>; > + gpios = <&gpio 25 1>; > + }; > + }; > + > + chosen { > + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait"; > + }; > +}; > + > +&clk_pll { > + clocks = <&ref12>; > +}; > + > +&sdhci { > + status = "okay"; > +}; > + > +&mdio0 { > + status = "okay"; > + > + ethphy0: ethernet-phy@1 { > + device_type = "ethernet-phy"; > + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + }; > +}; > + > +&mdio1 { > + status = "okay"; > + > + ethphy1: ethernet-phy@1 { > + device_type = "ethernet-phy"; > + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + }; > +}; > + > +&mac0 { > + status = "okay"; > +}; > + > +&mac1 { > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi > new file mode 100644 > index 0000000..1fd27ed > --- /dev/null > +++ b/arch/arm/boot/dts/moxart.dtsi > @@ -0,0 +1,148 @@ > +/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC > + * > + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> > + * > + * Licensed under GPLv2 or later. > + */ > + > +/include/ "skeleton.dtsi" > + > +/ { > + compatible = "moxa,moxart"; > + model = "MOXART"; > + interrupt-parent = <&intc>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "faraday,fa526"; > + reg = <0>; > + }; > + }; > + > + clocks { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x90000000 0x10000000>; > + ranges; > + > + intc: interrupt-controller@98800000 { > + compatible = "moxa,moxart-ic"; > + reg = <0x98800000 0x38>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-mask = <0x00080000>; > + }; > + > + clk_pll: clk_pll@98100000 { > + compatible = "moxa,moxart-pll-clock"; > + #clock-cells = <0>; > + reg = <0x98100000 0x34>; > + }; > + > + clk_apb: clk_apb@98100000 { > + compatible = "moxa,moxart-apb-clock"; > + #clock-cells = <0>; > + reg = <0x98100000 0x34>; > + clocks = <&clk_pll>; > + }; > + > + timer: timer@98400000 { > + compatible = "moxa,moxart-timer"; > + reg = <0x98400000 0x42>; > + interrupts = <19 1>; > + clocks = <&clk_apb>; > + }; > + > + gpio: gpio@98700000 { > + gpio-controller; > + #gpio-cells = <2>; > + compatible = "moxa,moxart-gpio"; > + reg = <0x98700000 0xC>; > + }; > + > + rtc: rtc { > + compatible = "moxa,moxart-rtc"; > + gpio-rtc-sclk = <&gpio 5 0>; > + gpio-rtc-data = <&gpio 6 0>; > + gpio-rtc-reset = <&gpio 7 0>; > + }; > + > + dma: dma@90500000 { > + compatible = "moxa,moxart-dma"; > + reg = <0x90500080 0x40>; > + interrupts = <24 0>; > + #dma-cells = <1>; > + }; > + > + watchdog: watchdog@98500000 { > + compatible = "moxa,moxart-watchdog"; > + reg = <0x98500000 0x10>; > + clocks = <&clk_apb>; > + }; > + > + sdhci: sdhci@98e00000 { > + compatible = "moxa,moxart-sdhci"; > + reg = <0x98e00000 0x5C>; > + interrupts = <5 0>; > + clocks = <&clk_apb>; > + dmas = <&dma 5>, > + <&dma 5>; > + dma-names = "tx", "rx"; > + status = "disabled"; > + }; > + > + mdio0: mdio@90900090 { > + compatible = "moxa,moxart-mdio"; > + reg = <0x90900090 0x8>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + mdio1: mdio@92000090 { > + compatible = "moxa,moxart-mdio"; > + reg = <0x92000090 0x8>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + mac0: mac@90900000 { > + compatible = "moxa,moxart-mac"; > + reg = <0x90900000 0x90>; > + interrupts = <25 0>; > + phy-handle = <ðphy0>; > + phy-mode = "mii"; > + status = "disabled"; > + }; > + > + mac1: mac@92000000 { > + compatible = "moxa,moxart-mac"; > + reg = <0x92000000 0x90>; > + interrupts = <27 0>; > + phy-handle = <ðphy1>; > + phy-mode = "mii"; > + status = "disabled"; > + }; > + > + uart0: uart@98200000 { > + compatible = "ns16550a"; > + reg = <0x98200000 0x20>; > + interrupts = <31 8>; > + reg-shift = <2>; > + reg-io-width = <4>; > + clock-frequency = <14745600>; > + status = "disabled"; > + }; > + }; > +}; > -- > 1.8.2.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt new file mode 100644 index 0000000..11087ed --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.txt @@ -0,0 +1,12 @@ +MOXA ART device tree bindings + +Boards with the MOXA ART SoC shall have the following properties: + +Required root node property: + +compatible = "moxa,moxart"; + +Boards: + +- UC-7112-LX: embedded computer + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 40e13e3..99a730f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts new file mode 100644 index 0000000..10d088d --- /dev/null +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -0,0 +1,117 @@ +/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +/include/ "moxart.dtsi" + +/ { + model = "MOXA UC-7112-LX"; + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + clocks { + ref12: ref12M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + }; + + flash@80000000,0 { + compatible = "numonyx,js28f128", "cfi-flash"; + reg = <0x80000000 0x1000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x40000>; + }; + partition@40000 { + label = "linux kernel"; + reg = <0x40000 0x1C0000>; + }; + partition@200000 { + label = "root filesystem"; + reg = <0x200000 0x800000>; + }; + partition@a00000 { + label = "user filesystem"; + reg = <0xa00000 0x600000>; + }; + }; + + leds { + compatible = "gpio-leds"; + user-led { + label = "ready-led"; + gpios = <&gpio 27 0x1>; + default-state = "on"; + linux,default-trigger = "default-on"; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <500>; + button@25 { + label = "GPIO Reset"; + linux,code = <116>; + gpios = <&gpio 25 1>; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait"; + }; +}; + +&clk_pll { + clocks = <&ref12>; +}; + +&sdhci { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mdio1 { + status = "okay"; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac0 { + status = "okay"; +}; + +&mac1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi new file mode 100644 index 0000000..1fd27ed --- /dev/null +++ b/arch/arm/boot/dts/moxart.dtsi @@ -0,0 +1,148 @@ +/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "moxa,moxart"; + model = "MOXART"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "faraday,fa526"; + reg = <0>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x90000000 0x10000000>; + ranges; + + intc: interrupt-controller@98800000 { + compatible = "moxa,moxart-ic"; + reg = <0x98800000 0x38>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-mask = <0x00080000>; + }; + + clk_pll: clk_pll@98100000 { + compatible = "moxa,moxart-pll-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + }; + + clk_apb: clk_apb@98100000 { + compatible = "moxa,moxart-apb-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + clocks = <&clk_pll>; + }; + + timer: timer@98400000 { + compatible = "moxa,moxart-timer"; + reg = <0x98400000 0x42>; + interrupts = <19 1>; + clocks = <&clk_apb>; + }; + + gpio: gpio@98700000 { + gpio-controller; + #gpio-cells = <2>; + compatible = "moxa,moxart-gpio"; + reg = <0x98700000 0xC>; + }; + + rtc: rtc { + compatible = "moxa,moxart-rtc"; + gpio-rtc-sclk = <&gpio 5 0>; + gpio-rtc-data = <&gpio 6 0>; + gpio-rtc-reset = <&gpio 7 0>; + }; + + dma: dma@90500000 { + compatible = "moxa,moxart-dma"; + reg = <0x90500080 0x40>; + interrupts = <24 0>; + #dma-cells = <1>; + }; + + watchdog: watchdog@98500000 { + compatible = "moxa,moxart-watchdog"; + reg = <0x98500000 0x10>; + clocks = <&clk_apb>; + }; + + sdhci: sdhci@98e00000 { + compatible = "moxa,moxart-sdhci"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mdio0: mdio@90900090 { + compatible = "moxa,moxart-mdio"; + reg = <0x90900090 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mdio1: mdio@92000090 { + compatible = "moxa,moxart-mdio"; + reg = <0x92000090 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac0: mac@90900000 { + compatible = "moxa,moxart-mac"; + reg = <0x90900000 0x90>; + interrupts = <25 0>; + phy-handle = <ðphy0>; + phy-mode = "mii"; + status = "disabled"; + }; + + mac1: mac@92000000 { + compatible = "moxa,moxart-mac"; + reg = <0x92000000 0x90>; + interrupts = <27 0>; + phy-handle = <ðphy1>; + phy-mode = "mii"; + status = "disabled"; + }; + + uart0: uart@98200000 { + compatible = "ns16550a"; + reg = <0x98200000 0x20>; + interrupts = <31 8>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <14745600>; + status = "disabled"; + }; + }; +};
Add a generic (dtsi) include file for MOXA ART SoCs. Also add a file for UC-7112-LX. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> --- Documentation/devicetree/bindings/arm/moxart.txt | 12 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/moxart-uc7112lx.dts | 117 ++++++++++++++++++ arch/arm/boot/dts/moxart.dtsi | 148 +++++++++++++++++++++++ 4 files changed, 278 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts create mode 100644 arch/arm/boot/dts/moxart.dtsi