| Message ID | 1388071909-12207-1-git-send-email-valentine.barshak@cogentembedded.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Valentine, Thank you for the patch. On Thursday 26 December 2013 19:31:49 Valentine Barshak wrote: > This adds R-Car M2 (R8A7791) VIN support. Both H2 and M2 > variants look the same from the driver's point of view, > so use GEN2 id for both. > > Changes in V2: > * Used the same (RCAR_GEN2) id for both H2 and M2 variants > since they are no different from the driver's point of view. > > Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/platform/soc_camera/rcar_vin.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/rcar_vin.c > b/drivers/media/platform/soc_camera/rcar_vin.c index 6866bb4..3b1c05a > 100644 > --- a/drivers/media/platform/soc_camera/rcar_vin.c > +++ b/drivers/media/platform/soc_camera/rcar_vin.c > @@ -106,7 +106,7 @@ > #define VIN_MAX_HEIGHT 2048 > > enum chip_id { > - RCAR_H2, > + RCAR_GEN2, > RCAR_H1, > RCAR_M1, > RCAR_E1, > @@ -302,7 +302,7 @@ static int rcar_vin_setup(struct rcar_vin_priv *priv) > dmr = 0; > break; > case V4L2_PIX_FMT_RGB32: > - if (priv->chip == RCAR_H2 || priv->chip == RCAR_H1 || > + if (priv->chip == RCAR_GEN2 || priv->chip == RCAR_H1 || > priv->chip == RCAR_E1) { > dmr = VNDMR_EXRGB; > break; > @@ -1384,7 +1384,8 @@ static struct soc_camera_host_ops rcar_vin_host_ops = > { }; > > static struct platform_device_id rcar_vin_id_table[] = { > - { "r8a7790-vin", RCAR_H2 }, > + { "r8a7791-vin", RCAR_GEN2 }, > + { "r8a7790-vin", RCAR_GEN2 }, > { "r8a7779-vin", RCAR_H1 }, > { "r8a7778-vin", RCAR_M1 }, > { "uPD35004-vin", RCAR_E1 },
diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 6866bb4..3b1c05a 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -106,7 +106,7 @@ #define VIN_MAX_HEIGHT 2048 enum chip_id { - RCAR_H2, + RCAR_GEN2, RCAR_H1, RCAR_M1, RCAR_E1, @@ -302,7 +302,7 @@ static int rcar_vin_setup(struct rcar_vin_priv *priv) dmr = 0; break; case V4L2_PIX_FMT_RGB32: - if (priv->chip == RCAR_H2 || priv->chip == RCAR_H1 || + if (priv->chip == RCAR_GEN2 || priv->chip == RCAR_H1 || priv->chip == RCAR_E1) { dmr = VNDMR_EXRGB; break; @@ -1384,7 +1384,8 @@ static struct soc_camera_host_ops rcar_vin_host_ops = { }; static struct platform_device_id rcar_vin_id_table[] = { - { "r8a7790-vin", RCAR_H2 }, + { "r8a7791-vin", RCAR_GEN2 }, + { "r8a7790-vin", RCAR_GEN2 }, { "r8a7779-vin", RCAR_H1 }, { "r8a7778-vin", RCAR_M1 }, { "uPD35004-vin", RCAR_E1 },
This adds R-Car M2 (R8A7791) VIN support. Both H2 and M2 variants look the same from the driver's point of view, so use GEN2 id for both. Changes in V2: * Used the same (RCAR_GEN2) id for both H2 and M2 variants since they are no different from the driver's point of view. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> --- drivers/media/platform/soc_camera/rcar_vin.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)