| Message ID | 1388763256-25851-4-git-send-email-geert@linux-m68k.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Fri, Jan 3, 2014 at 5:51 PM, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote: >> + platform_device_register_resndata(&platform_bus, "qspi", 0, > > As I understood, there's single QSPI controller, so why you pass 0, and > not -1 here? Indeed, there's only a single QSPI instance. However, I choose to use "0" for consistency with Lager. Mach-shmobile seems to use a mix of 0 and -1. If the maintainer prefers -1, I can change that. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 01/03/2014 06:34 PM, Geert Uytterhoeven wrote: > From: Geert Uytterhoeven <geert+renesas@linux-m68k.org> > Enable support for the Spansion s25fl512s SPI FLASH on the Koelsch board: > - Add QSPI platform device, resources, platform data, and pinmux, > - Add FLASH data and MTD partitions. > Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> > --- > arch/arm/mach-shmobile/board-koelsch.c | 61 ++++++++++++++++++++++++++++++++ > 1 file changed, 61 insertions(+) > diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c > index de7cc64b1f37..723ed54b38be 100644 > --- a/arch/arm/mach-shmobile/board-koelsch.c > +++ b/arch/arm/mach-shmobile/board-koelsch.c [...] > @@ -190,6 +246,11 @@ static void __init koelsch_add_standard_devices(void) > platform_device_register_data(&platform_bus, "gpio-keys", -1, > &koelsch_keys_pdata, > sizeof(koelsch_keys_pdata)); > + platform_device_register_resndata(&platform_bus, "qspi", 0, As I understood, there's single QSPI controller, so why you pass 0, and not -1 here? > + qspi_resources, > + ARRAY_SIZE(qspi_resources), > + &qspi_pdata, sizeof(qspi_pdata)); > + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi > <sergei.shtylyov@cogentembedded.com> wrote: > >> + platform_device_register_resndata(&platform_bus, "qspi", 0, > > > > As I understood, there's single QSPI controller, so why you pass 0, and > > not -1 here? > > Indeed, there's only a single QSPI instance. > However, I choose to use "0" for consistency with Lager. > Mach-shmobile seems to use a mix of 0 and -1. > > If the maintainer prefers -1, I can change that. In SPI driver case, spi master will use dynamic bus_num value if ID was -1 (in spi_register_master()). Then, slave device can't be detected. So, ID = 0 is reasonable even though single QSPI. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jan 05, 2014 at 04:39:14PM -0800, Kuninori Morimoto wrote: > Hi > > > <sergei.shtylyov@cogentembedded.com> wrote: > > >> + platform_device_register_resndata(&platform_bus, "qspi", 0, > > > > > > As I understood, there's single QSPI controller, so why you pass 0, and > > > not -1 here? > > > > Indeed, there's only a single QSPI instance. > > However, I choose to use "0" for consistency with Lager. > > Mach-shmobile seems to use a mix of 0 and -1. > > > > If the maintainer prefers -1, I can change that. > > In SPI driver case, spi master will use dynamic > bus_num value if ID was -1 (in spi_register_master()). > Then, slave device can't be detected. > So, ID = 0 is reasonable even though single QSPI. When it makes sense I prefer -1, however, in this case it seems that 0 is a better choice. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index de7cc64b1f37..723ed54b38be 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -25,12 +25,17 @@ #include <linux/input.h> #include <linux/kernel.h> #include <linux/leds.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <linux/phy.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/rcar-du.h> #include <linux/platform_device.h> #include <linux/sh_eth.h> +#include <linux/spi/flash.h> +#include <linux/spi/rspi.h> +#include <linux/spi/spi.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7791.h> @@ -148,6 +153,55 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = { .nbuttons = ARRAY_SIZE(gpio_buttons), }; +/* QSPI */ +static const struct resource qspi_resources[] __initconst = { + DEFINE_RES_MEM(0xe6b10000, 0x1000), + DEFINE_RES_IRQ(gic_spi(184)), +}; + +static const struct rspi_plat_data qspi_pdata __initconst = { + .num_chipselect = 1, +}; + +/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */ +static struct mtd_partition spi_flash_part[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static const struct flash_platform_data spi_flash_data = { + .name = "m25p80", + .parts = spi_flash_part, + .nr_parts = ARRAY_SIZE(spi_flash_part), + .type = "s25fl512s", +}; + +static const struct spi_board_info spi_info[] __initconst = { + { + .modalias = "m25p80", + .platform_data = &spi_flash_data, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + static const struct pinctrl_map koelsch_pinctrl_map[] = { /* DU */ PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", @@ -165,6 +219,8 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = { "eth_rmii", "eth"), PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", "intc_irq0", "intc"), + /* QSPI */ + PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791", "qspi", "qspi"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", "scif0_data_d", "scif0"), @@ -190,6 +246,11 @@ static void __init koelsch_add_standard_devices(void) platform_device_register_data(&platform_bus, "gpio-keys", -1, &koelsch_keys_pdata, sizeof(koelsch_keys_pdata)); + platform_device_register_resndata(&platform_bus, "qspi", 0, + qspi_resources, + ARRAY_SIZE(qspi_resources), + &qspi_pdata, sizeof(qspi_pdata)); + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); koelsch_add_du_device(); }